[PATCH AUTOSEL for 4.4 001/115] Input: tsc2007 - check for presence and power down tsc2007 during probe

[PATCH AUTOSEL for 4.4 001/115] Input: tsc2007 - check for presence and power down tsc2007 during probe

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 934df23171e7c5b71d937104d4957891c39748ff ]

1. check if chip is really present and don't succeed if it isn't.
2. if it succeeds, power down the chip until accessed

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/touchscreen/tsc2007.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 5d0cd51c6f41..a4b7b4c3d27b 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -455,6 +455,14 @@ static int tsc2007_probe(struct i2c_client *client,
 
 	tsc2007_stop(ts);
 
+	/* power down the chip (TSC2007_SETUP does not ACK on I2C) */
+	err = tsc2007_xfer(ts, PWRDOWN);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to setup chip: %d\n", err);
+		return err;	/* usually, chip does not respond */
+	}
+
 	err = input_register_device(input_dev);
 	if (err) {
 		dev_err(&client->dev,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 003/115] staging: speakup: Replace BUG_ON() with WARN_ON().

[Sasha Levin]

From: Varsha Rao <rvarsha016@gmail.com>

[ Upstream commit d351c2db5420bb17dcd2d9aac7ddb5f64c6d04b3 ]

BUG_ON() is replaced with WARN_ON() and EINVAL is returned, when
WARN_ON() is true. This fixes the following checkpatch issue:

Avoid crashing the kernel - try using WARN_ON & recovery code rather
than BUG() or BUG_ON().

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/speakup/kobjects.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/speakup/kobjects.c b/drivers/staging/speakup/kobjects.c
index fdfeb42b2b8f..06ef26872462 100644
--- a/drivers/staging/speakup/kobjects.c
+++ b/drivers/staging/speakup/kobjects.c
@@ -831,7 +831,9 @@ static ssize_t message_show(struct kobject *kobj,
 	struct msg_group_t *group = spk_find_msg_group(attr->attr.name);
 	unsigned long flags;
 
-	BUG_ON(!group);
+	if (WARN_ON(!group))
+		return -EINVAL;
+
 	spin_lock_irqsave(&speakup_info.spinlock, flags);
 	retval = message_show_helper(buf, group->start, group->end);
 	spin_unlock_irqrestore(&speakup_info.spinlock, flags);
@@ -843,7 +845,9 @@ static ssize_t message_store(struct kobject *kobj, struct kobj_attribute *attr,
 {
 	struct msg_group_t *group = spk_find_msg_group(attr->attr.name);
 
-	BUG_ON(!group);
+	if (WARN_ON(!group))
+		return -EINVAL;
+
 	return message_store_helper(buf, count, group);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 002/115] kretprobes: Ensure probe location is at function entry

[Sasha Levin]

From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>

[ Upstream commit 90ec5e89e393c76e19afc845d8f88a5dc8315919 ]

kretprobes can be registered by specifying an absolute address or by
specifying offset to a symbol. However, we need to ensure this falls at
function entry so as to be able to determine the return address.

Validate the same during kretprobe registration. By default, there
should not be any offset from a function entry, as determined through a
kallsyms_lookup(). Introduce arch_function_offset_within_entry() as a
way for architectures to override this.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/f1583bc4839a3862cfc2acefcc56f9c8837fa2ba.1487770934.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/kprobes.h |  1 +
 kernel/kprobes.c        | 13 +++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index e23392517db9..56a998f34bdd 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -266,6 +266,7 @@ extern int arch_init_kprobes(void);
 extern void show_registers(struct pt_regs *regs);
 extern void kprobes_inc_nmissed_count(struct kprobe *p);
 extern bool arch_within_kprobe_blacklist(unsigned long addr);
+extern bool arch_function_offset_within_entry(unsigned long offset);
 
 extern bool within_kprobe_blacklist(unsigned long addr);
 
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 695763516908..f6232bbbc0e3 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1834,12 +1834,25 @@ static int pre_handler_kretprobe(struct kprobe *p, struct pt_regs *regs)
 }
 NOKPROBE_SYMBOL(pre_handler_kretprobe);
 
+bool __weak arch_function_offset_within_entry(unsigned long offset)
+{
+	return !offset;
+}
+
 int register_kretprobe(struct kretprobe *rp)
 {
 	int ret = 0;
 	struct kretprobe_instance *inst;
 	int i;
 	void *addr;
+	unsigned long offset;
+
+	addr = kprobe_addr(&rp->kp);
+	if (!kallsyms_lookup_size_offset((unsigned long)addr, NULL, &offset))
+		return -EINVAL;
+
+	if (!arch_function_offset_within_entry(offset))
+		return -EINVAL;
 
 	if (kretprobe_blacklist_size) {
 		addr = kprobe_addr(&rp->kp);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 004/115] staging: wilc1000: add check for kmalloc allocation failure.

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 6cc0c259d034c6ab48f4e12f505213988e73d380 ]

Add a sanity check that wid.val has been allocated, fixes a null
pointer deference on stamac when calling ether_add_copy.

Detected by CoverityScan, CID#1369537 ("Dereference null return value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/wilc1000/host_interface.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
index dbbe72c7e255..f78353ddeea5 100644
--- a/drivers/staging/wilc1000/host_interface.c
+++ b/drivers/staging/wilc1000/host_interface.c
@@ -2179,6 +2179,8 @@ static s32 Handle_Get_InActiveTime(struct host_if_drv *hif_drv,
 	wid.type = WID_STR;
 	wid.size = ETH_ALEN;
 	wid.val = kmalloc(wid.size, GFP_KERNEL);
+	if (!wid.val)
+		return -ENOMEM;
 
 	stamac = wid.val;
 	memcpy(stamac, strHostIfStaInactiveT->mac, ETH_ALEN);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 005/115] HID: reject input outside logical range only if null state is set

[Sasha Levin]

From: Valtteri Heikkilä <rnd@nic.fi>

[ Upstream commit 3f3752705dbd50b66b66ad7b4d54fe33d2f746ed ]

This patch fixes an issue in drivers/hid/hid-input.c where USB HID
control null state flag is not checked upon rejecting inputs outside
logical minimum-maximum range. The check should be made according to USB
HID specification 1.11, section 6.2.2.5, p.31. The fix will resolve
issues with some game controllers, such as:
https://bugzilla.kernel.org/show_bug.cgi?id=68621

[tk@the-tk.com: shortened and fixed spelling in commit message]
Signed-off-by: Valtteri Heikkilä <rnd@nic.fi>
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hid/hid-input.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 2ba6bf69b7d0..33d3deb32888 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1135,6 +1135,7 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 	 * don't specify logical min and max.
 	 */
 	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+	    (field->flags & HID_MAIN_ITEM_NULL_STATE) &&
 	    (field->logical_minimum < field->logical_maximum) &&
 	    (value < field->logical_minimum ||
 	     value > field->logical_maximum)) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 006/115] drm: qxl: Don't alloc fbdev if emulation is not supported

[Sasha Levin]

From: Gabriel Krisman Bertazi <krisman@collabora.co.uk>

[ Upstream commit 861078381ba56b56808113736000d9e7ead349c8 ]

If fbdev emulation is disabled, the QXL shutdown path will try to clean
a framebuffer that wasn't initialized, hitting the Oops below.  The
problem is that even when FBDEV_EMULATION is disabled we allocate the
qfbdev strutucture, but we don't initialize it.  The fix is to stop
allocating the memory, since it won't be used.  This allows the existing
verification in the cleanup hook to do it's job preventing the oops.

Now that we don't allocate the unused fbdev structure, we need to be
careful when dereferencing it in the PM suspend hook.

[   24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0
[   24.285627] IP: mutex_lock+0x18/0x30
[   24.286049] PGD 78cdf067
[   24.286050] PUD 7940f067
[   24.286344] PMD 0
[   24.286649]
[   24.287072] Oops: 0002 [#1] SMP
[   24.287422] Modules linked in: qxl
[   24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ #97
[   24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000
[   24.290354] RIP: 0010:mutex_lock+0x18/0x30
[   24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246
[   24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000
[   24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0
[   24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001
[   24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000
[   24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060
[   24.295439] FS:  00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[   24.296364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0
[   24.297813] Call Trace:
[   24.298097]  drm_framebuffer_cleanup+0x1f/0x70
[   24.298612]  qxl_fbdev_fini+0x68/0x90 [qxl]
[   24.299074]  qxl_modeset_fini+0xd/0x30 [qxl]
[   24.299562]  qxl_pci_remove+0x22/0x50 [qxl]
[   24.300025]  pci_device_remove+0x34/0xb0
[   24.300507]  device_release_driver_internal+0x150/0x200
[   24.301082]  device_release_driver+0xd/0x10
[   24.301587]  unbind_store+0x108/0x150
[   24.301993]  drv_attr_store+0x20/0x30
[   24.302402]  sysfs_kf_write+0x32/0x40
[   24.302827]  kernfs_fop_write+0x108/0x190
[   24.303269]  __vfs_write+0x23/0x120
[   24.303678]  ? security_file_permission+0x36/0xb0
[   24.304193]  ? rw_verify_area+0x49/0xb0
[   24.304636]  vfs_write+0xb0/0x190
[   24.305004]  SyS_write+0x41/0xa0
[   24.305362]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[   24.305887] RIP: 0033:0x7f30e31d9620
[   24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620
[   24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001
[   24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40
[   24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001
[   24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34
[   24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00
55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e>
48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3
[   24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0
[   24.313811] CR2: 00000000000002e0
[   24.314208] ---[ end trace 29669c1593cae14b ]---

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227203330.18542-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/qxl/qxl_fb.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c
index c4a552637c93..3ff7689835dc 100644
--- a/drivers/gpu/drm/qxl/qxl_fb.c
+++ b/drivers/gpu/drm/qxl/qxl_fb.c
@@ -494,9 +494,11 @@ static const struct drm_fb_helper_funcs qxl_fb_helper_funcs = {
 
 int qxl_fbdev_init(struct qxl_device *qdev)
 {
+	int ret = 0;
+
+#ifdef CONFIG_DRM_FBDEV_EMULATION
 	struct qxl_fbdev *qfbdev;
 	int bpp_sel = 32; /* TODO: parameter from somewhere? */
-	int ret;
 
 	qfbdev = kzalloc(sizeof(struct qxl_fbdev), GFP_KERNEL);
 	if (!qfbdev)
@@ -531,6 +533,8 @@ fini:
 	drm_fb_helper_fini(&qfbdev->helper);
 free:
 	kfree(qfbdev);
+#endif
+
 	return ret;
 }
 
@@ -546,6 +550,9 @@ void qxl_fbdev_fini(struct qxl_device *qdev)
 
 void qxl_fbdev_set_suspend(struct qxl_device *qdev, int state)
 {
+	if (!qdev->mode_info.qfbdev)
+		return;
+
 	drm_fb_helper_set_suspend(&qdev->mode_info.qfbdev->helper, state);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 008/115] net: mvpp2: set dma mask and coherent dma mask on PPv2.2

[Sasha Levin]

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

[ Upstream commit 2067e0a13cfe0b1bdca7b91bc5e4f2740b07d478 ]

On PPv2.2, the streaming mappings can be anywhere in the first 40 bits
of the physical address space. However, for the coherent mappings, we
still need them to be in the first 32 bits of the address space,
because all BM pools share a single register to store the high 32 bits
of the BM pool address, which means all BM pools must be allocated in
the same 4GB memory area.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/marvell/mvpp2.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index ac92685dd4e5..b961860e4389 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -6448,6 +6448,20 @@ static int mvpp2_probe(struct platform_device *pdev)
 	/* Get system's tclk rate */
 	priv->tclk = clk_get_rate(priv->pp_clk);
 
+	if (priv->hw_version == MVPP22) {
+		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(40));
+		if (err)
+			goto err_mg_clk;
+		/* Sadly, the BM pools all share the same register to
+		 * store the high 32 bits of their address. So they
+		 * must all have the same high 32 bits, which forces
+		 * us to restrict coherent memory to DMA_BIT_MASK(32).
+		 */
+		err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+		if (err)
+			goto err_mg_clk;
+	}
+
 	/* Initialize network controller */
 	err = mvpp2_init(pdev, priv);
 	if (err < 0) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 007/115] ath10k: fix a warning during channel switch with multiple vaps

[Sasha Levin]

From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>

[ Upstream commit c73f8c00330f59ce9b1ace9ff698aca83390d358 ]

Doing a channel switch via hostapd_cli seems to update
the new channel context for each VAP's appropriately as below
in 'ath10k_mac_update_vif_chan', hence we can safely suppress the
warning that shows up during this operation and dump the warning only
if no vaps are available for channel switch

hostapd_cli -i wlan0 chan_switch 5 5200
OK

ath10k_pci : mac chanctx switch n_vifs 3 mode 1
ath10k_pci : mac chanctx switch vdev_id 2 freq 5180->5200 width 0->0
ath10k_pci : mac chanctx switch vdev_id 1 freq 5180->5200 width 0->0
ath10k_pci : mac chanctx switch vdev_id 0 freq 5180->5200 width 0->0

Call Trace:

WARNING: backports-20161201-3.14.77-9ab3068/drivers/net/wireless/ath/ath10k/mac.c:7126
[<c022f2d4>] (warn_slowpath_null) from [<bf7f150c>]
(ath10k_reconfig_complete+0xe4/0x25c [ath10k_core])
[<bf7f150c>] (ath10k_reconfig_complete [ath10k_core])
[<bf7f35f0>] (ath10k_mac_vif_ap_csa_work+0x214/0x370 [ath10k_core])
[<bf7f38b8>] (ath10k_mac_op_change_chanctx+0x108/0x128 [ath10k_core])
[<bf782ac0>] (ieee80211_recalc_chanctx_min_def+0x30c/0x430 [mac80211])
[<bf7830a4>] (ieee80211_recalc_smps_chanctx+0x2ec/0x840 [mac80211])
[<bf7843e8>] (ieee80211_vif_use_reserved_context+0x7c/0xf8 [mac80211])
[<bf7843e8>] (ieee80211_vif_use_reserved_context [mac80211])
[<bf76e5d4>] (ieee80211_csa_finalize_work+0x5c/0x88 [mac80211])

Fixes: d7bf4b4aba05 ("ath10k: fix ar->rx_channel updating logic")
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index bed8d89fe3a0..d5c9ca47219c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6427,7 +6427,7 @@ ath10k_mac_update_rx_channel(struct ath10k *ar,
 	lockdep_assert_held(&ar->data_lock);
 
 	WARN_ON(ctx && vifs);
-	WARN_ON(vifs && n_vifs != 1);
+	WARN_ON(vifs && !n_vifs);
 
 	/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
 	 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
-- 
2.14.1

[PATCH AUTOSEL for 4.4 009/115] PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()

[Sasha Levin]

From: Prarit Bhargava <prarit@redhat.com>

[ Upstream commit fda78d7a0ead144f4b2cdb582dcba47911f4952c ]

The pci_bus_type .shutdown method, pci_device_shutdown(), is called from
device_shutdown() in the kernel restart and shutdown paths.

Previously, pci_device_shutdown() called pci_msi_shutdown() and
pci_msix_shutdown().  This disables MSI and MSI-X, which causes the device
to fall back to raising interrupts via INTx.  But the driver is still bound
to the device, it doesn't know about this change, and it likely doesn't
have an INTx handler, so these INTx interrupts cause "nobody cared"
warnings like this:

  irq 16: nobody cared (try booting with the "irqpoll" option)
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1
  Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/
  ...

The MSI disabling code was added by d52877c7b1af ("pci/irq: let
pci_device_shutdown to call pci_msi_shutdown v2") because a driver left MSI
enabled and kdump failed because the kexeced kernel wasn't prepared to
receive the MSI interrupts.

Subsequent commits 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even
if kernel doesn't support MSI") and  e80e7edc55ba ("PCI/MSI: Initialize MSI
capability for all architectures") changed the kexeced kernel to disable
all MSIs itself so it no longer depends on the crashed kernel to clean up
after itself.

Stop disabling MSI/MSI-X in pci_device_shutdown().  This resolves the
"nobody cared" unhandled IRQ issue above.  It also allows PCI serial
devices, which may rely on the MSI interrupts, to continue outputting
messages during reboot/shutdown.

[bhelgaas: changelog, drop pci_msi_shutdown() and pci_msix_shutdown() calls
altogether]
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=187351
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Arcari <darcari@redhat.com>
CC: Myron Stowe <mstowe@redhat.com>
CC: Lukas Wunner <lukas@wunner.de>
CC: Keith Busch <keith.busch@intel.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pci/pci-driver.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 32bd8ab79d53..5e42b5f2f565 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -463,8 +463,6 @@ static void pci_device_shutdown(struct device *dev)
 
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
-	pci_msi_shutdown(pci_dev);
-	pci_msix_shutdown(pci_dev);
 
 #ifdef CONFIG_KEXEC_CORE
 	/*
-- 
2.14.1

[PATCH AUTOSEL for 4.4 010/115] selinux: check for address length in selinux_socket_bind()

[Sasha Levin]

From: Alexander Potapenko <glider@google.com>

[ Upstream commit e2f586bd83177d22072b275edd4b8b872daba924 ]

KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of
uninitialized memory in selinux_socket_bind():

==================================================================
BUG: KMSAN: use of unitialized memory
inter: 0
CPU: 3 PID: 1074 Comm: packet2 Tainted: G    B           4.8.0-rc6+ #1916
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 0000000000000000 ffff8800882ffb08 ffffffff825759c8 ffff8800882ffa48
 ffffffff818bf551 ffffffff85bab870 0000000000000092 ffffffff85bab550
 0000000000000000 0000000000000092 00000000bb0009bb 0000000000000002
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff825759c8>] dump_stack+0x238/0x290 lib/dump_stack.c:51
 [<ffffffff818bdee6>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1008
 [<ffffffff818bf0fb>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424
 [<ffffffff822dae71>] selinux_socket_bind+0xf41/0x1080 security/selinux/hooks.c:4288
 [<ffffffff8229357c>] security_socket_bind+0x1ec/0x240 security/security.c:1240
 [<ffffffff84265d98>] SYSC_bind+0x358/0x5f0 net/socket.c:1366
 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292
 [<ffffffff8518217c>] entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.o:?
chained origin: 00000000ba6009bb
 [<ffffffff810bb7a7>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67
 [<     inline     >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322
 [<     inline     >] kmsan_save_stack mm/kmsan/kmsan.c:337
 [<ffffffff818bd2b8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:530
 [<ffffffff818bf033>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380
 [<ffffffff84265b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356
 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292
 [<ffffffff8518217c>] return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.o:?
origin description: ----address@SYSC_bind (origin=00000000b8c00900)
==================================================================

(the line numbers are relative to 4.8-rc6, but the bug persists upstream)

, when I run the following program as root:

=======================================================
  #include <string.h>
  #include <sys/socket.h>
  #include <netinet/in.h>

  int main(int argc, char *argv[]) {
    struct sockaddr addr;
    int size = 0;
    if (argc > 1) {
      size = atoi(argv[1]);
    }
    memset(&addr, 0, sizeof(addr));
    int fd = socket(PF_INET6, SOCK_DGRAM, IPPROTO_IP);
    bind(fd, &addr, size);
    return 0;
  }
=======================================================

(for different values of |size| other error reports are printed).

This happens because bind() unconditionally copies |size| bytes of
|addr| to the kernel, leaving the rest uninitialized. Then
security_socket_bind() reads the IP address bytes, including the
uninitialized ones, to determine the port, or e.g. pass them further to
sel_netnode_find(), which uses them to calculate a hash.

Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
[PM: fixed some whitespace damage]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 security/selinux/hooks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 3f370eb494d1..4c7db967b7bb 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -4124,10 +4124,18 @@ static int selinux_socket_bind(struct socket *sock, struct sockaddr *address, in
 		u32 sid, node_perm;
 
 		if (family == PF_INET) {
+			if (addrlen < sizeof(struct sockaddr_in)) {
+				err = -EINVAL;
+				goto out;
+			}
 			addr4 = (struct sockaddr_in *)address;
 			snum = ntohs(addr4->sin_port);
 			addrp = (char *)&addr4->sin_addr.s_addr;
 		} else {
+			if (addrlen < SIN6_LEN_RFC2133) {
+				err = -EINVAL;
+				goto out;
+			}
 			addr6 = (struct sockaddr_in6 *)address;
 			snum = ntohs(addr6->sin6_port);
 			addrp = (char *)&addr6->sin6_addr.s6_addr;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 011/115] perf sort: Fix segfault with basic block 'cycles' sort dimension

[Sasha Levin]

From: Changbin Du <changbin.du@intel.com>

[ Upstream commit 4b0b3aa6a2756e6115fdf275c521e4552a7082f3 ]

Skip the sample which doesn't have branch_info to avoid segmentation
fault:

The fault can be reproduced by:

  perf record -a
  perf report -F cycles

Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 0e332f033a82 ("perf tools: Add support for cycles, weight branch_info field")
Link: http://lkml.kernel.org/r/20170313083148.23568-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/sort.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index 2d8ccd4d9e1b..87312056f75d 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -604,6 +604,9 @@ static int hist_entry__mispredict_snprintf(struct hist_entry *he, char *bf,
 static int64_t
 sort__cycles_cmp(struct hist_entry *left, struct hist_entry *right)
 {
+	if (!left->branch_info || !right->branch_info)
+		return cmp_null(left->branch_info, right->branch_info);
+
 	return left->branch_info->flags.cycles -
 		right->branch_info->flags.cycles;
 }
@@ -611,6 +614,8 @@ sort__cycles_cmp(struct hist_entry *left, struct hist_entry *right)
 static int hist_entry__cycles_snprintf(struct hist_entry *he, char *bf,
 				    size_t size, unsigned int width)
 {
+	if (!he->branch_info)
+		return scnprintf(bf, size, "%-.*s", width, "N/A");
 	if (he->branch_info->flags.cycles == 0)
 		return repsep_snprintf(bf, size, "%-*s", width, "-");
 	return repsep_snprintf(bf, size, "%-*hd", width,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 012/115] i40e: Acquire NVM lock before reads on all devices

[Sasha Levin]

From: Aaron Salter <aaron.k.salter@intel.com>

[ Upstream commit 96a39aed25e6559b160786117df124084feb9080 ]

Acquire NVM lock before reads on all devices.  Previously, locks were
only used for X722 and later.  Fixes an issue where simultaneous X710
NVM accesses were interfering with each other.

Change-ID: If570bb7acf958cef58725ec2a2011cead6f80638
Signed-off-by: Aaron Salter <aaron.k.salter@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/i40e/i40e_nvm.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
index 6100cdd9ad13..dd4e6ea9e0e1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
@@ -292,14 +292,14 @@ i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
 {
 	enum i40e_status_code ret_code = 0;
 
-	if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE) {
-		ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
-		if (!ret_code) {
+	ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+	if (!ret_code) {
+		if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE) {
 			ret_code = i40e_read_nvm_word_aq(hw, offset, data);
-			i40e_release_nvm(hw);
+		} else {
+			ret_code = i40e_read_nvm_word_srctl(hw, offset, data);
 		}
-	} else {
-		ret_code = i40e_read_nvm_word_srctl(hw, offset, data);
+		i40e_release_nvm(hw);
 	}
 	return ret_code;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 013/115] i40e: fix ethtool to get EEPROM data from X722 interface

[Sasha Levin]

From: Lihong Yang <lihong.yang@intel.com>

[ Upstream commit c271dd6c391b535226cf1a81aaad9f33cb5899d3 ]

Currently ethtool -e will error out with a X722 interface
as its EEPROM has a scope limit at offset 0x5B9FFF.
This patch fixes the issue by setting the EEPROM length to
the scope limit to avoid NVM read failure beyond that.

Change-ID: I0b7d4dd6c7f2a57cace438af5dffa0f44c229372
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 488a50d59dca..3da1f206ff84 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1073,6 +1073,11 @@ static int i40e_get_eeprom_len(struct net_device *netdev)
 	struct i40e_hw *hw = &np->vsi->back->hw;
 	u32 val;
 
+#define X722_EEPROM_SCOPE_LIMIT 0x5B9FFF
+	if (hw->mac.type == I40E_MAC_X722) {
+		val = X722_EEPROM_SCOPE_LIMIT + 1;
+		return val;
+	}
 	val = (rd32(hw, I40E_GLPCI_LBARCTRL)
 		& I40E_GLPCI_LBARCTRL_FL_SIZE_MASK)
 		>> I40E_GLPCI_LBARCTRL_FL_SIZE_SHIFT;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 015/115] drivers: net: xgene: Fix hardware checksum setting

[Sasha Levin]

From: Quan Nguyen <qnguyen@apm.com>

[ Upstream commit e026e700d940a1ea3d3bc84d92ac668b1f015462 ]

This patch fixes the hardware checksum settings by properly program
the classifier. Otherwise, packet may be received with checksum error
on X-Gene1 SoC.

Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 1 +
 drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
index c31e691d11fc..e8d31640058d 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
@@ -604,6 +604,7 @@ static void xgene_enet_cle_bypass(struct xgene_enet_pdata *pdata,
 	xgene_enet_rd_csr(pdata, CLE_BYPASS_REG0_0_ADDR, &cb);
 	cb |= CFG_CLE_BYPASS_EN0;
 	CFG_CLE_IP_PROTOCOL0_SET(&cb, 3);
+	CFG_CLE_IP_HDR_LEN_SET(&cb, 0);
 	xgene_enet_wr_csr(pdata, CLE_BYPASS_REG0_0_ADDR, cb);
 
 	xgene_enet_rd_csr(pdata, CLE_BYPASS_REG1_0_ADDR, &cb);
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
index c153a1dc5ff7..480312105964 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
@@ -147,6 +147,7 @@ enum xgene_enet_rm {
 #define CFG_RXCLK_MUXSEL0_SET(dst, val)	xgene_set_bits(dst, val, 26, 3)
 
 #define CFG_CLE_IP_PROTOCOL0_SET(dst, val)	xgene_set_bits(dst, val, 16, 2)
+#define CFG_CLE_IP_HDR_LEN_SET(dst, val)	xgene_set_bits(dst, val, 8, 5)
 #define CFG_CLE_DSTQID0_SET(dst, val)		xgene_set_bits(dst, val, 0, 12)
 #define CFG_CLE_FPSEL0_SET(dst, val)		xgene_set_bits(dst, val, 16, 4)
 #define CFG_MACMODE_SET(dst, val)		xgene_set_bits(dst, val, 18, 2)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 014/115] perf tools: Make perf_event__synthesize_mmap_events() scale

[Sasha Levin]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit 88b897a30c525c2eee6e7f16e1e8d0f18830845e ]

This patch significantly improves the execution time of
perf_event__synthesize_mmap_events() when running perf record on systems
where processes have lots of threads.

It just happens that cat /proc/pid/maps support uses a O(N^2) algorithm to
generate each map line in the maps file.  If you have 1000 threads, then you
have necessarily 1000 stacks.  For each vma, you need to check if it
corresponds to a thread's stack.  With a large number of threads, this can take
a very long time. I have seen latencies >> 10mn.

As of today, perf does not use the fact that a mapping is a stack, therefore we
can work around the issue by using /proc/pid/tasks/pid/maps.  This entry does
not try to map a vma to stack and is thus much faster with no loss of
functonality.

The proc-map-timeout logic is kept in case users still want some upper limit.

In V2, we fix the file path from /proc/pid/tasks/pid/maps to actual
/proc/pid/task/pid/maps, tasks -> task.  Thanks Arnaldo for catching this.

Committer note:

This problem seems to have been elliminated in the kernel since commit :
b18cb64ead40 ("fs/proc: Stop trying to report thread stacks").

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170315135059.GC2177@redhat.com
Link: http://lkml.kernel.org/r/1489598233-25586-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/event.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 26cba64345e3..46af9dde11e2 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -234,8 +234,8 @@ int perf_event__synthesize_mmap_events(struct perf_tool *tool,
 	if (machine__is_default_guest(machine))
 		return 0;
 
-	snprintf(filename, sizeof(filename), "%s/proc/%d/maps",
-		 machine->root_dir, pid);
+	snprintf(filename, sizeof(filename), "%s/proc/%d/task/%d/maps",
+		 machine->root_dir, pid, pid);
 
 	fp = fopen(filename, "r");
 	if (fp == NULL) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 016/115] drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 608b20506941969ea30d8c08dc9ae02bb87dbf7d ]

On vblank instant-off systems, we can get into a situation where the cost
of enabling and disabling the vblank IRQ around a drmWaitVblank query
dominates. And with the advent of even deeper hardware sleep state,
touching registers becomes ever more expensive.  However, we know that if
the user wants the current vblank counter, they are also very likely to
immediately queue a vblank wait and so we can keep the interrupt around
and only turn it off if we have no further vblank requests queued within
the interrupt interval.

After vblank event delivery, this patch adds a shadow of one vblank where
the interrupt is kept alive for the user to query and queue another vblank
event. Similarly, if the user is using blocking drmWaitVblanks, the
interrupt will be disabled on the IRQ following the wait completion.
However, if the user is simply querying the current vblank counter and
timestamp, the interrupt will be disabled after every IRQ and the user
will enabled it again on the first query following the IRQ.

v2: Mario Kleiner -
After testing this, one more thing that would make sense is to move
the disable block at the end of drm_handle_vblank() instead of at the
top.

Turns out that if high precision timestaming is disabled or doesn't
work for some reason (as can be simulated by echo 0 >
/sys/module/drm/parameters/timestamp_precision_usec), then with your
delayed disable code at its current place, the vblank counter won't
increment anymore at all for instant queries, ie. with your other
"instant query" patches. Clients which repeatedly query the counter
and wait for it to progress will simply hang, spinning in an endless
query loop. There's that comment in vblank_disable_and_save:

"* Skip this step if there isn't any high precision timestamp
 * available. In that case we can't account for this and just
 * hope for the best.
 */

With the disable happening after leading edge of vblank (== hw counter
increment already happened) but before the vblank counter/timestamp
handling in drm_handle_vblank, that step is needed to keep the counter
progressing, so skipping it is bad.

Now without high precision timestamping support, a kms driver must not
set dev->vblank_disable_immediate = true, as this would cause problems
for clients, so this shouldn't matter, but it would be good to still
make this robust against a future kms driver which might have
unreliable high precision timestamping, e.g., high precision
timestamping that intermittently doesn't work.

v3: Patch before coffee needs extra coffee.

Testcase: igt/kms_vblank
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>,
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/drm_irq.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 8090989185b2..4ddbc49125cd 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -1271,9 +1271,9 @@ void drm_vblank_put(struct drm_device *dev, unsigned int pipe)
 	if (atomic_dec_and_test(&vblank->refcount)) {
 		if (drm_vblank_offdelay == 0)
 			return;
-		else if (dev->vblank_disable_immediate || drm_vblank_offdelay < 0)
+		else if (drm_vblank_offdelay < 0)
 			vblank_disable_fn((unsigned long)vblank);
-		else
+		else if (!dev->vblank_disable_immediate)
 			mod_timer(&vblank->disable_timer,
 				  jiffies + ((drm_vblank_offdelay * HZ)/1000));
 	}
@@ -1902,6 +1902,16 @@ bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe)
 	wake_up(&vblank->queue);
 	drm_handle_vblank_events(dev, pipe);
 
+	/* With instant-off, we defer disabling the interrupt until after
+	 * we finish processing the following vblank. The disable has to
+	 * be last (after drm_handle_vblank_events) so that the timestamp
+	 * is always accurate.
+	 */
+	if (dev->vblank_disable_immediate &&
+	    drm_vblank_offdelay > 0 &&
+	    !atomic_read(&vblank->refcount))
+		vblank_disable_fn((unsigned long)vblank);
+
 	spin_unlock_irqrestore(&dev->event_lock, irqflags);
 
 	return true;
-- 
2.14.1

Re: [PATCH AUTOSEL for 4.4 016/115] drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)

[Ben Hutchings]

On Sat, 2018-03-03 at 22:30 +0000, Sasha Levin wrote:
> From: Chris Wilson <chris@chris-wilson.co.uk>
> 
> [ Upstream commit 608b20506941969ea30d8c08dc9ae02bb87dbf7d ]

I think we need this one too:

commit 75cff0837c14eaf632efabb8d7ab9eec6394d20d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Mar 24 17:30:58 2017 +0000

    drm: Make the decision to keep vblank irq enabled earlier

Ben.

> On vblank instant-off systems, we can get into a situation where the cost
> of enabling and disabling the vblank IRQ around a drmWaitVblank query
> dominates. And with the advent of even deeper hardware sleep state,
> touching registers becomes ever more expensive.  However, we know that if
> the user wants the current vblank counter, they are also very likely to
> immediately queue a vblank wait and so we can keep the interrupt around
> and only turn it off if we have no further vblank requests queued within
> the interrupt interval.
> 
> After vblank event delivery, this patch adds a shadow of one vblank where
> the interrupt is kept alive for the user to query and queue another vblank
> event. Similarly, if the user is using blocking drmWaitVblanks, the
> interrupt will be disabled on the IRQ following the wait completion.
> However, if the user is simply querying the current vblank counter and
> timestamp, the interrupt will be disabled after every IRQ and the user
> will enabled it again on the first query following the IRQ.
> 
> v2: Mario Kleiner -
> After testing this, one more thing that would make sense is to move
> the disable block at the end of drm_handle_vblank() instead of at the
> top.
> 
> Turns out that if high precision timestaming is disabled or doesn't
> work for some reason (as can be simulated by echo 0 >
> /sys/module/drm/parameters/timestamp_precision_usec), then with your
> delayed disable code at its current place, the vblank counter won't
> increment anymore at all for instant queries, ie. with your other
> "instant query" patches. Clients which repeatedly query the counter
> and wait for it to progress will simply hang, spinning in an endless
> query loop. There's that comment in vblank_disable_and_save:
> 
> "* Skip this step if there isn't any high precision timestamp
>  * available. In that case we can't account for this and just
>  * hope for the best.
>  */
> 
> With the disable happening after leading edge of vblank (== hw counter
> increment already happened) but before the vblank counter/timestamp
> handling in drm_handle_vblank, that step is needed to keep the counter
> progressing, so skipping it is bad.
> 
> Now without high precision timestamping support, a kms driver must not
> set dev->vblank_disable_immediate = true, as this would cause problems
> for clients, so this shouldn't matter, but it would be good to still
> make this robust against a future kms driver which might have
> unreliable high precision timestamping, e.g., high precision
> timestamping that intermittently doesn't work.
> 
> v3: Patch before coffee needs extra coffee.
> 
> Testcase: igt/kms_vblank
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Michel Dänzer <michel@daenzer.net>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Dave Airlie <airlied@redhat.com>,
> Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> ---
>  drivers/gpu/drm/drm_irq.c | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
> index 8090989185b2..4ddbc49125cd 100644
> --- a/drivers/gpu/drm/drm_irq.c
> +++ b/drivers/gpu/drm/drm_irq.c
> @@ -1271,9 +1271,9 @@ void drm_vblank_put(struct drm_device *dev, unsigned int pipe)
>  	if (atomic_dec_and_test(&vblank->refcount)) {
>  		if (drm_vblank_offdelay == 0)
>  			return;
> -		else if (dev->vblank_disable_immediate || drm_vblank_offdelay < 0)
> +		else if (drm_vblank_offdelay < 0)
>  			vblank_disable_fn((unsigned long)vblank);
> -		else
> +		else if (!dev->vblank_disable_immediate)
>  			mod_timer(&vblank->disable_timer,
>  				  jiffies + ((drm_vblank_offdelay * HZ)/1000));
>  	}
> @@ -1902,6 +1902,16 @@ bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe)
>  	wake_up(&vblank->queue);
>  	drm_handle_vblank_events(dev, pipe);
>  
> +	/* With instant-off, we defer disabling the interrupt until after
> +	 * we finish processing the following vblank. The disable has to
> +	 * be last (after drm_handle_vblank_events) so that the timestamp
> +	 * is always accurate.
> +	 */
> +	if (dev->vblank_disable_immediate &&
> +	    drm_vblank_offdelay > 0 &&
> +	    !atomic_read(&vblank->refcount))
> +		vblank_disable_fn((unsigned long)vblank);
> +
>  	spin_unlock_irqrestore(&dev->event_lock, irqflags);
>  
>  	return true;
> -- 
> 2.14.1
-- 
Ben Hutchings
Software Developer, Codethink Ltd.

Re: [PATCH AUTOSEL for 4.4 016/115] drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)

[Ville Syrjälä]

On Thu, Mar 29, 2018 at 05:32:13PM +0100, Ben Hutchings wrote:
> On Sat, 2018-03-03 at 22:30 +0000, Sasha Levin wrote:
> > From: Chris Wilson <chris@chris-wilson.co.uk>
> > 
> > [ Upstream commit 608b20506941969ea30d8c08dc9ae02bb87dbf7d ]
> 
> I think we need this one too:
> 
> commit 75cff0837c14eaf632efabb8d7ab9eec6394d20d
> Author: Chris Wilson <chris@chris-wilson.co.uk>
> Date:   Fri Mar 24 17:30:58 2017 +0000
> 
>     drm: Make the decision to keep vblank irq enabled earlier

Why are we backporting optimizations anyway?

> 
> Ben.
> 
> > On vblank instant-off systems, we can get into a situation where the cost
> > of enabling and disabling the vblank IRQ around a drmWaitVblank query
> > dominates. And with the advent of even deeper hardware sleep state,
> > touching registers becomes ever more expensive.  However, we know that if
> > the user wants the current vblank counter, they are also very likely to
> > immediately queue a vblank wait and so we can keep the interrupt around
> > and only turn it off if we have no further vblank requests queued within
> > the interrupt interval.
> > 
> > After vblank event delivery, this patch adds a shadow of one vblank where
> > the interrupt is kept alive for the user to query and queue another vblank
> > event. Similarly, if the user is using blocking drmWaitVblanks, the
> > interrupt will be disabled on the IRQ following the wait completion.
> > However, if the user is simply querying the current vblank counter and
> > timestamp, the interrupt will be disabled after every IRQ and the user
> > will enabled it again on the first query following the IRQ.
> > 
> > v2: Mario Kleiner -
> > After testing this, one more thing that would make sense is to move
> > the disable block at the end of drm_handle_vblank() instead of at the
> > top.
> > 
> > Turns out that if high precision timestaming is disabled or doesn't
> > work for some reason (as can be simulated by echo 0 >
> > /sys/module/drm/parameters/timestamp_precision_usec), then with your
> > delayed disable code at its current place, the vblank counter won't
> > increment anymore at all for instant queries, ie. with your other
> > "instant query" patches. Clients which repeatedly query the counter
> > and wait for it to progress will simply hang, spinning in an endless
> > query loop. There's that comment in vblank_disable_and_save:
> > 
> > "* Skip this step if there isn't any high precision timestamp
> >  * available. In that case we can't account for this and just
> >  * hope for the best.
> >  */
> > 
> > With the disable happening after leading edge of vblank (== hw counter
> > increment already happened) but before the vblank counter/timestamp
> > handling in drm_handle_vblank, that step is needed to keep the counter
> > progressing, so skipping it is bad.
> > 
> > Now without high precision timestamping support, a kms driver must not
> > set dev->vblank_disable_immediate = true, as this would cause problems
> > for clients, so this shouldn't matter, but it would be good to still
> > make this robust against a future kms driver which might have
> > unreliable high precision timestamping, e.g., high precision
> > timestamping that intermittently doesn't work.
> > 
> > v3: Patch before coffee needs extra coffee.
> > 
> > Testcase: igt/kms_vblank
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > Cc: Michel Dänzer <michel@daenzer.net>
> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Cc: Dave Airlie <airlied@redhat.com>,
> > Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
> > Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
> > Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> > ---
> >  drivers/gpu/drm/drm_irq.c | 14 ++++++++++++--
> >  1 file changed, 12 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
> > index 8090989185b2..4ddbc49125cd 100644
> > --- a/drivers/gpu/drm/drm_irq.c
> > +++ b/drivers/gpu/drm/drm_irq.c
> > @@ -1271,9 +1271,9 @@ void drm_vblank_put(struct drm_device *dev, unsigned int pipe)
> >  	if (atomic_dec_and_test(&vblank->refcount)) {
> >  		if (drm_vblank_offdelay == 0)
> >  			return;
> > -		else if (dev->vblank_disable_immediate || drm_vblank_offdelay < 0)
> > +		else if (drm_vblank_offdelay < 0)
> >  			vblank_disable_fn((unsigned long)vblank);
> > -		else
> > +		else if (!dev->vblank_disable_immediate)
> >  			mod_timer(&vblank->disable_timer,
> >  				  jiffies + ((drm_vblank_offdelay * HZ)/1000));
> >  	}
> > @@ -1902,6 +1902,16 @@ bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe)
> >  	wake_up(&vblank->queue);
> >  	drm_handle_vblank_events(dev, pipe);
> >  
> > +	/* With instant-off, we defer disabling the interrupt until after
> > +	 * we finish processing the following vblank. The disable has to
> > +	 * be last (after drm_handle_vblank_events) so that the timestamp
> > +	 * is always accurate.
> > +	 */
> > +	if (dev->vblank_disable_immediate &&
> > +	    drm_vblank_offdelay > 0 &&
> > +	    !atomic_read(&vblank->refcount))
> > +		vblank_disable_fn((unsigned long)vblank);
> > +
> >  	spin_unlock_irqrestore(&dev->event_lock, irqflags);
> >  
> >  	return true;
> > -- 
> > 2.14.1
> -- 
> Ben Hutchings
> Software Developer, Codethink Ltd.

-- 
Ville Syrjälä
Intel OTC

Re: [PATCH AUTOSEL for 4.4 016/115] drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)

[Ben Hutchings]

On Thu, 2018-03-29 at 19:42 +0300, Ville Syrjälä wrote:
> On Thu, Mar 29, 2018 at 05:32:13PM +0100, Ben Hutchings wrote:
> > On Sat, 2018-03-03 at 22:30 +0000, Sasha Levin wrote:
> > > > > > From: Chris Wilson <chris@chris-wilson.co.uk>
> > > 
> > > [ Upstream commit 608b20506941969ea30d8c08dc9ae02bb87dbf7d ]
> > 
> > I think we need this one too:
> > 
> > commit 75cff0837c14eaf632efabb8d7ab9eec6394d20d
> > Author: Chris Wilson <chris@chris-wilson.co.uk>
> > Date:   Fri Mar 24 17:30:58 2017 +0000
> > 
> >     drm: Make the decision to keep vblank irq enabled earlier
> 
> Why are we backporting optimizations anyway?

That's a good question.  I don't know the reasoning behind picking the
first commit (608b20506941).  I'm only suggesting the second commit
because it appears to be an important fix for the first.

Ben.

> > 
> > Ben.
> > 
> > > On vblank instant-off systems, we can get into a situation where the cost
> > > of enabling and disabling the vblank IRQ around a drmWaitVblank query
> > > dominates. And with the advent of even deeper hardware sleep state,
> > > touching registers becomes ever more expensive.  However, we know that if
> > > the user wants the current vblank counter, they are also very likely to
> > > immediately queue a vblank wait and so we can keep the interrupt around
> > > and only turn it off if we have no further vblank requests queued within
> > > the interrupt interval.
> > > 
> > > After vblank event delivery, this patch adds a shadow of one vblank where
> > > the interrupt is kept alive for the user to query and queue another vblank
> > > event. Similarly, if the user is using blocking drmWaitVblanks, the
> > > interrupt will be disabled on the IRQ following the wait completion.
> > > However, if the user is simply querying the current vblank counter and
> > > timestamp, the interrupt will be disabled after every IRQ and the user
> > > will enabled it again on the first query following the IRQ.
> > > 
> > > v2: Mario Kleiner -
> > > After testing this, one more thing that would make sense is to move
> > > the disable block at the end of drm_handle_vblank() instead of at the
> > > top.
> > > 
> > > Turns out that if high precision timestaming is disabled or doesn't
> > > work for some reason (as can be simulated by echo 0 >
> > > /sys/module/drm/parameters/timestamp_precision_usec), then with your
> > > delayed disable code at its current place, the vblank counter won't
> > > increment anymore at all for instant queries, ie. with your other
> > > "instant query" patches. Clients which repeatedly query the counter
> > > and wait for it to progress will simply hang, spinning in an endless
> > > query loop. There's that comment in vblank_disable_and_save:
> > > 
> > > "* Skip this step if there isn't any high precision timestamp
> > >  * available. In that case we can't account for this and just
> > >  * hope for the best.
> > >  */
> > > 
> > > With the disable happening after leading edge of vblank (== hw counter
> > > increment already happened) but before the vblank counter/timestamp
> > > handling in drm_handle_vblank, that step is needed to keep the counter
> > > progressing, so skipping it is bad.
> > > 
> > > Now without high precision timestamping support, a kms driver must not
> > > set dev->vblank_disable_immediate = true, as this would cause problems
> > > for clients, so this shouldn't matter, but it would be good to still
> > > make this robust against a future kms driver which might have
> > > unreliable high precision timestamping, e.g., high precision
> > > timestamping that intermittently doesn't work.
> > > 
> > > v3: Patch before coffee needs extra coffee.
> > > 
> > > Testcase: igt/kms_vblank
> > > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > Cc: Michel Dänzer <michel@daenzer.net>
> > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > Cc: Dave Airlie <airlied@redhat.com>,
> > > Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
> > > Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
> > > Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> > > ---
> > >  drivers/gpu/drm/drm_irq.c | 14 ++++++++++++--
> > >  1 file changed, 12 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
> > > index 8090989185b2..4ddbc49125cd 100644
> > > --- a/drivers/gpu/drm/drm_irq.c
> > > +++ b/drivers/gpu/drm/drm_irq.c
> > > @@ -1271,9 +1271,9 @@ void drm_vblank_put(struct drm_device *dev, unsigned int pipe)
> > >  	if (atomic_dec_and_test(&vblank->refcount)) {
> > >  		if (drm_vblank_offdelay == 0)
> > >  			return;
> > > -		else if (dev->vblank_disable_immediate || drm_vblank_offdelay < 0)
> > > +		else if (drm_vblank_offdelay < 0)
> > >  			vblank_disable_fn((unsigned long)vblank);
> > > -		else
> > > +		else if (!dev->vblank_disable_immediate)
> > >  			mod_timer(&vblank->disable_timer,
> > >  				  jiffies + ((drm_vblank_offdelay * HZ)/1000));
> > >  	}
> > > @@ -1902,6 +1902,16 @@ bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe)
> > >  	wake_up(&vblank->queue);
> > >  	drm_handle_vblank_events(dev, pipe);
> > >  
> > > +	/* With instant-off, we defer disabling the interrupt until after
> > > +	 * we finish processing the following vblank. The disable has to
> > > +	 * be last (after drm_handle_vblank_events) so that the timestamp
> > > +	 * is always accurate.
> > > +	 */
> > > +	if (dev->vblank_disable_immediate &&
> > > +	    drm_vblank_offdelay > 0 &&
> > > +	    !atomic_read(&vblank->refcount))
> > > +		vblank_disable_fn((unsigned long)vblank);
> > > +
> > >  	spin_unlock_irqrestore(&dev->event_lock, irqflags);
> > >  
> > >  	return true;
> > > -- 
> > > 2.14.1
> > 
> > -- 
> > Ben Hutchings
> > Software Developer, Codethink Ltd.
> 
> 
-- 
Ben Hutchings
Software Developer, Codethink Ltd.

[PATCH AUTOSEL for 4.4 017/115] ath10k: disallow DFS simulation if DFS channel is not enabled

[Sasha Levin]

From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>

[ Upstream commit ca07baab0b1e627ae1d4a55d190fb1c9d32a3445 ]

If DFS is not enabled in hostapd (ieee80211h=0) DFS channels shall
not be available for use even though the hardware may have the capability
to support DFS. With this configuration (DFS disabled in hostapd) trying to
bring up ath10k device in DFS channel for AP mode fails and trying to
simulate DFS in ath10k debugfs results in a warning in cfg80211 complaining
invalid channel and this should be avoided in the driver itself rather than
false propogating RADAR detection to mac80211/cfg80211. Fix this by
checking for the first vif 'is_started' state(should work for client mode
as well) as all the vifs shall be configured for the same channel

sys/kernel/debug/ieee80211/phy1/ath10k# echo 1 > dfs_simulate_radar

WARNING: at net/wireless/chan.c:265 cfg80211_radar_event+0x24/0x60
Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211]
[<c022f2d4>] (warn_slowpath_null) from
[<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211])
[<bf72dab8>] (cfg80211_radar_event [cfg80211]) from
[<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211])
[<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from
[<c0242320>] (process_one_work+0x20c/0x32c)

WARNING: at net/wireless/nl80211.c:2488 nl80211_get_mpath+0x13c/0x4cc
 Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211]
[<c022f2d4>] (warn_slowpath_null) from
[<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211])
[<bf72dab8>] (cfg80211_radar_event [cfg80211]) from
[<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211])
[<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from
[<c0242320>] (process_one_work+0x20c/0x32c)

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 1a88a24ffeac..30c357567054 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1892,6 +1892,15 @@ static ssize_t ath10k_write_simulate_radar(struct file *file,
 					   size_t count, loff_t *ppos)
 {
 	struct ath10k *ar = file->private_data;
+	struct ath10k_vif *arvif;
+
+	/* Just check for for the first vif alone, as all the vifs will be
+	 * sharing the same channel and if the channel is disabled, all the
+	 * vifs will share the same 'is_started' state.
+	 */
+	arvif = list_first_entry(&ar->arvifs, typeof(*arvif), list);
+	if (!arvif->is_started)
+		return -EINVAL;
 
 	ieee80211_radar_detected(ar->hw);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 019/115] HID: clamp input to logical range if no null state

[Sasha Levin]

From: Tomasz Kramkowski <tk@the-tk.com>

[ Upstream commit c3883fe06488a483658ba5d849b70e49bee15e7c ]

This patch fixes an issue in drivers/hid/hid-input.c where values
outside of the logical range are not clamped when "null state" bit of
the input control is not set.

This was discussed on the lists [1] and this change stems from the fact
due to the ambiguity of the HID specification it might be appropriate to
follow Microsoft's own interpretation of the specification. As noted in
Microsoft's documentation [2] in the section titled "Required HID usages
for digitizers" it is noted that values reported outside the logical
range "will be considered as invalid data and the value will be changed
to the nearest boundary value (logical min/max)."

This patch fixes an issue where the (1292:4745) Innomedia INNEX
GENESIS/ATARI reports out of range values for its X and Y axis of the
DPad which, due to the null state bit being unset, are forwarded to
userspace as is. Now these values will get clamped to the logical range
before being forwarded to userspace. This device was also used to test
this patch.

This patch expands on commit 3f3752705dbd ("HID: reject input outside
logical range only if null state is set").

[1]: http://lkml.kernel.org/r/20170307131036.GA853@gaia.local
[2]: https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp

Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hid/hid-input.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 33d3deb32888..53e54855c366 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1128,19 +1128,26 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 
 	/*
 	 * Ignore out-of-range values as per HID specification,
-	 * section 5.10 and 6.2.25.
+	 * section 5.10 and 6.2.25, when NULL state bit is present.
+	 * When it's not, clamp the value to match Microsoft's input
+	 * driver as mentioned in "Required HID usages for digitizers":
+	 * https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp
 	 *
 	 * The logical_minimum < logical_maximum check is done so that we
 	 * don't unintentionally discard values sent by devices which
 	 * don't specify logical min and max.
 	 */
 	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
-	    (field->flags & HID_MAIN_ITEM_NULL_STATE) &&
-	    (field->logical_minimum < field->logical_maximum) &&
-	    (value < field->logical_minimum ||
-	     value > field->logical_maximum)) {
-		dbg_hid("Ignoring out-of-range value %x\n", value);
-		return;
+	    (field->logical_minimum < field->logical_maximum)) {
+		if (field->flags & HID_MAIN_ITEM_NULL_STATE &&
+		    (value < field->logical_minimum ||
+		     value > field->logical_maximum)) {
+			dbg_hid("Ignoring out-of-range value %x\n", value);
+			return;
+		}
+		value = clamp(value,
+			      field->logical_minimum,
+			      field->logical_maximum);
 	}
 
 	/*
-- 
2.14.1

[PATCH AUTOSEL for 4.4 018/115] perf probe: Return errno when not hitting any event

[Sasha Levin]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

[ Upstream commit 70946723eeb859466f026274b29c6196e39149c4 ]

On old perf, when using 'perf probe -d' to delete an inexistent event,
it returns errno, eg,

  -bash-4.3# perf probe -d xxx  || echo $?
  Info: Event "*:xxx" does not exist.
    Error: Failed to delete events.
  255

But now perf_del_probe_events() will always set ret = 0, different from
previous del_perf_probe_events(). After this, it returns errno again,
eg,

  -bash-4.3# ./perf probe -d xxx  || echo $?
  "xxx" does not hit any event.
    Error: Failed to delete events.
  254

And it is more appropriate to return -ENOENT instead of -EPERM.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: dddc7ee32fa1 ("perf probe: Fix an error when deleting probes successfully")
Link: http://lkml.kernel.org/r/1489738592-61011-1-git-send-email-wangkefeng.wang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/builtin-probe.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index 132afc97676c..9d4ac90ca87e 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -405,9 +405,9 @@ static int perf_del_probe_events(struct strfilter *filter)
 	}
 
 	if (ret == -ENOENT && ret2 == -ENOENT)
-		pr_debug("\"%s\" does not hit any event.\n", str);
-		/* Note that this is silently ignored */
-	ret = 0;
+		pr_warning("\"%s\" does not hit any event.\n", str);
+	else
+		ret = 0;
 
 error:
 	if (kfd >= 0)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 020/115] net/8021q: create device with all possible features in wanted_features

[Sasha Levin]

From: Andrey Vagin <avagin@openvz.org>

[ Upstream commit 88997e4208aea117627898e5f6f9801cf3cd42d2 ]

wanted_features is a set of features which have to be enabled if a
hardware allows that.

Currently when a vlan device is created, its wanted_features is set to
current features of its base device.

The problem is that the base device can get new features and they are
not propagated to vlan-s of this device.

If we look at bonding devices, they doesn't have this problem and this
patch suggests to fix this issue by the same way how it works for bonding
devices.

We meet this problem, when we try to create a vlan device over a bonding
device. When a system are booting, real devices require time to be
initialized, so bonding devices created without slaves, then vlan
devices are created and only then ethernet devices are added to the
bonding device. As a result we have vlan devices with disabled
scatter-gather.

* create a bonding device
  $ ip link add bond0 type bond
  $ ethtool -k bond0 | grep scatter
  scatter-gather: off
	tx-scatter-gather: off [requested on]
	tx-scatter-gather-fraglist: off [requested on]

* create a vlan device
  $ ip link add link bond0 name bond0.10 type vlan id 10
  $ ethtool -k bond0.10 | grep scatter
  scatter-gather: off
	tx-scatter-gather: off
	tx-scatter-gather-fraglist: off

* Add a slave device to bond0
  $ ip link set dev eth0 master bond0

And now we can see that the bond0 device has got the scatter-gather
feature, but the bond0.10 hasn't got it.
[root@laptop linux-task-diag]# ethtool -k bond0 | grep scatter
scatter-gather: on
	tx-scatter-gather: on
	tx-scatter-gather-fraglist: on
[root@laptop linux-task-diag]# ethtool -k bond0.10 | grep scatter
scatter-gather: off
	tx-scatter-gather: off
	tx-scatter-gather-fraglist: off

With this patch the vlan device will get all new features from the
bonding device.

Here is a call trace how features which are set in this patch reach
dev->wanted_features.

register_netdevice
   vlan_dev_init
	...
	dev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG |
		       NETIF_F_FRAGLIST | NETIF_F_GSO_SOFTWARE |
		       NETIF_F_HIGHDMA | NETIF_F_SCTP_CRC |
		       NETIF_F_ALL_FCOE;

	dev->features |= dev->hw_features;
	...
    dev->wanted_features = dev->features & dev->hw_features;
    __netdev_update_features(dev);
        vlan_dev_fix_features
	   ...

Cc: Alexey Kuznetsov <kuznet@virtuozzo.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/8021q/vlan_dev.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index ca4dc9031073..89da689b6433 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -559,8 +559,7 @@ static int vlan_dev_init(struct net_device *dev)
 			   NETIF_F_HIGHDMA | NETIF_F_SCTP_CSUM |
 			   NETIF_F_ALL_FCOE;
 
-	dev->features |= real_dev->vlan_features | NETIF_F_LLTX |
-			 NETIF_F_GSO_SOFTWARE;
+	dev->features |= dev->hw_features | NETIF_F_LLTX;
 	dev->gso_max_size = real_dev->gso_max_size;
 	if (dev->features & NETIF_F_VLAN_FEATURES)
 		netdev_warn(real_dev, "VLAN features are set incorrectly.  Q-in-Q configurations may not work correctly.\n");
-- 
2.14.1

[PATCH AUTOSEL for 4.4 021/115] ARM: dts: Adjust moxart IRQ controller and flags

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit c2a736b698008d296c5010ec39077eeb5796109f ]

The moxart interrupt line flags were not respected in previous
driver: instead of assigning them per-consumer, a fixes mask
was set in the controller.

With the migration to a standard Faraday driver we need to
set up and handle the consumer flags correctly. Also remove
the Moxart-specific flags when switching to using real consumer
flags.

Extend the register window to 0x100 bytes as we may have a few
more registers in there and it doesn't hurt.

Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/moxart-uc7112lx.dts |  2 +-
 arch/arm/boot/dts/moxart.dtsi         | 17 +++++++++--------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index 10d088df0c35..4a962a26482d 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -6,7 +6,7 @@
  */
 
 /dts-v1/;
-/include/ "moxart.dtsi"
+#include "moxart.dtsi"
 
 / {
 	model = "MOXA UC-7112-LX";
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index 1fd27ed65a01..64f2f44235d0 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -6,6 +6,7 @@
  */
 
 /include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "moxa,moxart";
@@ -36,8 +37,8 @@
 		ranges;
 
 		intc: interrupt-controller@98800000 {
-			compatible = "moxa,moxart-ic";
-			reg = <0x98800000 0x38>;
+			compatible = "moxa,moxart-ic", "faraday,ftintc010";
+			reg = <0x98800000 0x100>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-mask = <0x00080000>;
@@ -59,7 +60,7 @@
 		timer: timer@98400000 {
 			compatible = "moxa,moxart-timer";
 			reg = <0x98400000 0x42>;
-			interrupts = <19 1>;
+			interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
 			clocks = <&clk_apb>;
 		};
 
@@ -80,7 +81,7 @@
 		dma: dma@90500000 {
 			compatible = "moxa,moxart-dma";
 			reg = <0x90500080 0x40>;
-			interrupts = <24 0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 		};
 
@@ -93,7 +94,7 @@
 		sdhci: sdhci@98e00000 {
 			compatible = "moxa,moxart-sdhci";
 			reg = <0x98e00000 0x5C>;
-			interrupts = <5 0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
 			dmas =  <&dma 5>,
 				<&dma 5>;
@@ -120,7 +121,7 @@
 		mac0: mac@90900000 {
 			compatible = "moxa,moxart-mac";
 			reg = <0x90900000 0x90>;
-			interrupts = <25 0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 			phy-handle = <&ethphy0>;
 			phy-mode = "mii";
 			status = "disabled";
@@ -129,7 +130,7 @@
 		mac1: mac@92000000 {
 			compatible = "moxa,moxart-mac";
 			reg = <0x92000000 0x90>;
-			interrupts = <27 0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 			phy-handle = <&ethphy1>;
 			phy-mode = "mii";
 			status = "disabled";
@@ -138,7 +139,7 @@
 		uart0: uart@98200000 {
 			compatible = "ns16550a";
 			reg = <0x98200000 0x20>;
-			interrupts = <31 8>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clock-frequency = <14745600>;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 022/115] batman-adv: handle race condition for claims between gateways

[Sasha Levin]

From: Andreas Pape <APape@phoenixcontact.com>

[ Upstream commit a3a5129e122709306cfa6409781716c2933df99b ]

Consider the following situation which has been found in a test setup:
Gateway B has claimed client C and gateway A has the same backbone
network as B. C sends a broad- or multicast to B and directly after
this packet decides to send another packet to A due to a better TQ
value. B will forward the broad-/multicast into the backbone as it is
the responsible gw and after that A will claim C as it has been
chosen by C as the best gateway. If it now happens that A claims C
before it has received the broad-/multicast forwarded by B (due to
backbone topology or due to some delay in B when forwarding the
packet) we get a critical situation: in the current code A will
immediately unclaim C when receiving the multicast due to the
roaming client scenario although the position of C has not changed
in the mesh. If this happens the multi-/broadcast forwarded by B
will be sent back into the mesh by A and we have looping packets
until one of the gateways claims C again.
In order to prevent this, unclaiming of a client due to the roaming
client scenario is only done after a certain time is expired after
the last claim of the client. 100 ms are used here, which should be
slow enough for big backbones and slow gateways but fast enough not
to break the roaming client use case.

Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/batman-adv/bridge_loop_avoidance.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index f5d2fe5e31cc..c5208136e3fc 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1603,10 +1603,22 @@ int batadv_bla_tx(struct batadv_priv *bat_priv, struct sk_buff *skb,
 		/* if yes, the client has roamed and we have
 		 * to unclaim it.
 		 */
-		batadv_handle_unclaim(bat_priv, primary_if,
-				      primary_if->net_dev->dev_addr,
-				      ethhdr->h_source, vid);
-		goto allow;
+		if (batadv_has_timed_out(claim->lasttime, 100)) {
+			/* only unclaim if the last claim entry is
+			 * older than 100 ms to make sure we really
+			 * have a roaming client here.
+			 */
+			batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Roaming client %pM detected. Unclaim it.\n",
+				   ethhdr->h_source);
+			batadv_handle_unclaim(bat_priv, primary_if,
+					      primary_if->net_dev->dev_addr,
+					      ethhdr->h_source, vid);
+			goto allow;
+		} else {
+			batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Race for claim %pM detected. Drop packet.\n",
+				   ethhdr->h_source);
+			goto handled;
+		}
 	}
 
 	/* check if it is a multicast/broadcast frame */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 023/115] of: fix of_device_get_modalias returned length when truncating buffers

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit bcf54d5385abaea9c8026aae6f4eeb348671a52d ]

If the length of the modalias is greater than the buffer size, then the
modalias is truncated. However the untruncated length is returned which
will cause an error. Fix this to return the truncated length. If an error
in the case was desired, then then we should just return -ENOMEM.

The reality is no device will ever have 4KB of compatible strings to hit
this case.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/of/device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/of/device.c b/drivers/of/device.c
index 97a280d50d6d..7c509bff9295 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -223,7 +223,7 @@ ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
 			str[i] = '_';
 	}
 
-	return tsize;
+	return repend;
 }
 EXPORT_SYMBOL_GPL(of_device_get_modalias);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 024/115] [media] solo6x10: release vb2 buffers in solo_stop_streaming()

[Sasha Levin]

From: Anton Sviridenko <anton@corp.bluecherry.net>

[ Upstream commit 6e4c8480bd2eb95309ad3c875e11d2cad98f9188 ]

Fixes warning that appears in dmesg after closing V4L2 userspace
application that plays video from the display device
(first device from V4L2 device nodes provided by solo, usually /dev/video0
when no other V4L2 devices are present). Encoder device nodes are not
affected. Can be reproduced by starting and closing

ffplay -f video4linux2  /dev/video0

[ 8130.281251] ------------[ cut here ]------------
[ 8130.281256] WARNING: CPU: 1 PID: 20414 at drivers/media/v4l2-core/videobuf2-core.c:1651 __vb2_queue_cancel+0x14b/0x230
[ 8130.281257] Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat solo6x10 x86_pkg_temp_thermal vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
[ 8130.281264] CPU: 1 PID: 20414 Comm: ffplay Tainted: G           O    4.10.0-gentoo #1
[ 8130.281264] Hardware name: ASUS All Series/B85M-E, BIOS 2301 03/30/2015
[ 8130.281265] Call Trace:
[ 8130.281267]  dump_stack+0x4f/0x72
[ 8130.281270]  __warn+0xc7/0xf0
[ 8130.281271]  warn_slowpath_null+0x18/0x20
[ 8130.281272]  __vb2_queue_cancel+0x14b/0x230
[ 8130.281273]  vb2_core_streamoff+0x23/0x90
[ 8130.281275]  vb2_streamoff+0x24/0x50
[ 8130.281276]  vb2_ioctl_streamoff+0x3d/0x50
[ 8130.281278]  v4l_streamoff+0x15/0x20
[ 8130.281279]  __video_do_ioctl+0x25e/0x2f0
[ 8130.281280]  video_usercopy+0x279/0x520
[ 8130.281282]  ? v4l_enum_fmt+0x1330/0x1330
[ 8130.281285]  ? unmap_region+0xdf/0x110
[ 8130.281285]  video_ioctl2+0x10/0x20
[ 8130.281286]  v4l2_ioctl+0xce/0xe0
[ 8130.281289]  do_vfs_ioctl+0x8b/0x5b0
[ 8130.281290]  ? __fget+0x72/0xa0
[ 8130.281291]  SyS_ioctl+0x74/0x80
[ 8130.281294]  entry_SYSCALL_64_fastpath+0x13/0x94
[ 8130.281295] RIP: 0033:0x7ff86fee6b27
[ 8130.281296] RSP: 002b:00007ffe467f6a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 8130.281297] RAX: ffffffffffffffda RBX: 00000000d1a4d788 RCX: 00007ff86fee6b27
[ 8130.281297] RDX: 00007ffe467f6a14 RSI: 0000000040045613 RDI: 0000000000000006
[ 8130.281298] RBP: 000000000373f8d0 R08: 00000000ffffffff R09: 00007ff860001140
[ 8130.281298] R10: 0000000000000243 R11: 0000000000000246 R12: 0000000000000000
[ 8130.281299] R13: 00000000000000a0 R14: 00007ffe467f6530 R15: 0000000001f32228
[ 8130.281300] ---[ end trace 00695dc96be646e7 ]---

Signed-off-by: Anton Sviridenko <anton@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/pci/solo6x10/solo6x10-v4l2.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2.c b/drivers/media/pci/solo6x10/solo6x10-v4l2.c
index f7ce493b1fee..a0b61e88c838 100644
--- a/drivers/media/pci/solo6x10/solo6x10-v4l2.c
+++ b/drivers/media/pci/solo6x10/solo6x10-v4l2.c
@@ -342,6 +342,17 @@ static void solo_stop_streaming(struct vb2_queue *q)
 	struct solo_dev *solo_dev = vb2_get_drv_priv(q);
 
 	solo_stop_thread(solo_dev);
+
+	spin_lock(&solo_dev->slock);
+	while (!list_empty(&solo_dev->vidq_active)) {
+		struct solo_vb2_buf *buf = list_entry(
+				solo_dev->vidq_active.next,
+				struct solo_vb2_buf, list);
+
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock(&solo_dev->slock);
 	INIT_LIST_HEAD(&solo_dev->vidq_active);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 025/115] scsi: ipr: Fix missed EH wakeup

[Sasha Levin]

From: Brian King <brking@linux.vnet.ibm.com>

[ Upstream commit 66a0d59cdd12546ddf01d229de28b07ccf6d637f ]

Following a command abort or device reset, ipr's EH handlers wait for
the commands getting aborted to get sent back from the adapter prior to
returning from the EH handler. This fixes up some cases where the
completion handler was not getting called, which would have resulted in
the EH thread waiting until it timed out, greatly extending EH time.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/ipr.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 7a58128a0000..2f61d8cd5882 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -835,8 +835,10 @@ static void ipr_sata_eh_done(struct ipr_cmnd *ipr_cmd)
 
 	qc->err_mask |= AC_ERR_OTHER;
 	sata_port->ioasa.status |= ATA_BUSY;
-	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 	ata_qc_complete(qc);
+	if (ipr_cmd->eh_comp)
+		complete(ipr_cmd->eh_comp);
+	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 }
 
 /**
@@ -5864,8 +5866,10 @@ static void ipr_erp_done(struct ipr_cmnd *ipr_cmd)
 		res->in_erp = 0;
 	}
 	scsi_dma_unmap(ipr_cmd->scsi_cmd);
-	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 	scsi_cmd->scsi_done(scsi_cmd);
+	if (ipr_cmd->eh_comp)
+		complete(ipr_cmd->eh_comp);
+	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 }
 
 /**
@@ -6255,8 +6259,10 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
 	}
 
 	scsi_dma_unmap(ipr_cmd->scsi_cmd);
-	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 	scsi_cmd->scsi_done(scsi_cmd);
+	if (ipr_cmd->eh_comp)
+		complete(ipr_cmd->eh_comp);
+	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 }
 
 /**
@@ -6282,8 +6288,10 @@ static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd)
 		scsi_dma_unmap(scsi_cmd);
 
 		spin_lock_irqsave(ipr_cmd->hrrq->lock, lock_flags);
-		list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 		scsi_cmd->scsi_done(scsi_cmd);
+		if (ipr_cmd->eh_comp)
+			complete(ipr_cmd->eh_comp);
+		list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 		spin_unlock_irqrestore(ipr_cmd->hrrq->lock, lock_flags);
 	} else {
 		spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 026/115] [media] media: i2c/soc_camera: fix ov6650 sensor getting wrong clock

[Sasha Levin]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

[ Upstream commit 54449af0e0b2ea43a8166611c95b730c850c3184 ]

After changes to v4l2_clk API introduced in v4.1 by commits a37462b919
'[media] V4L: remove clock name from v4l2_clk API' and 4f528afcfb
'[media] V4L: add CCF support to the v4l2_clk API', ov6650 sensor
stopped responding because v4l2_clk_get(), still called with
depreciated V4L2 clock name "mclk", started to return respective CCF
clock instead of the V4l2 one registered by soc_camera. Fix it by
calling v4l2_clk_get() with NULL clock name.

Created and tested on Amstrad Delta against Linux-4.7-rc3 with
omap1_camera fixes.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/soc_camera/ov6650.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/soc_camera/ov6650.c b/drivers/media/i2c/soc_camera/ov6650.c
index 1f8af1ee8352..1e4783b51a35 100644
--- a/drivers/media/i2c/soc_camera/ov6650.c
+++ b/drivers/media/i2c/soc_camera/ov6650.c
@@ -1033,7 +1033,7 @@ static int ov6650_probe(struct i2c_client *client,
 	priv->code	  = MEDIA_BUS_FMT_YUYV8_2X8;
 	priv->colorspace  = V4L2_COLORSPACE_JPEG;
 
-	priv->clk = v4l2_clk_get(&client->dev, "mclk");
+	priv->clk = v4l2_clk_get(&client->dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		ret = PTR_ERR(priv->clk);
 		goto eclkget;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 028/115] sysrq: Reset the watchdog timers while displaying high-resolution timers

[Sasha Levin]

From: Tom Hromatka <tom.hromatka@oracle.com>

[ Upstream commit 0107042768658fea9f5f5a9c00b1c90f5dab6a06 ]

On systems with a large number of CPUs, running sysrq-<q> can cause
watchdog timeouts.  There are two slow sections of code in the sysrq-<q>
path in timer_list.c.

1. print_active_timers() - This function is called by print_cpu() and
   contains a slow goto loop.  On a machine with hundreds of CPUs, this
   loop took approximately 100ms for the first CPU in a NUMA node.
   (Subsequent CPUs in the same node ran much quicker.)  The total time
   to print all of the CPUs is ultimately long enough to trigger the
   soft lockup watchdog.

2. print_tickdevice() - This function outputs a large amount of textual
   information.  This function also took approximately 100ms per CPU.

Since sysrq-<q> is not a performance critical path, there should be no
harm in touching the nmi watchdog in both slow sections above.  Touching
it in just one location was insufficient on systems with hundreds of
CPUs as occasional timeouts were still observed during testing.

This issue was observed on an Oracle T7 machine with 128 CPUs, but I
anticipate it may affect other systems with similarly large numbers of
CPUs.

Signed-off-by: Tom Hromatka <tom.hromatka@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/time/timer_list.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index ba7d8b288bb3..ef4f16e81283 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -16,6 +16,7 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/nmi.h>
 
 #include <asm/uaccess.h>
 
@@ -96,6 +97,9 @@ print_active_timers(struct seq_file *m, struct hrtimer_clock_base *base,
 
 next_one:
 	i = 0;
+
+	touch_nmi_watchdog();
+
 	raw_spin_lock_irqsave(&base->cpu_base->lock, flags);
 
 	curr = timerqueue_getnext(&base->active);
@@ -207,6 +211,8 @@ print_tickdevice(struct seq_file *m, struct tick_device *td, int cpu)
 {
 	struct clock_event_device *dev = td->evtdev;
 
+	touch_nmi_watchdog();
+
 	SEQ_printf(m, "Tick Device: mode:     %d\n", td->mode);
 	if (cpu < 0)
 		SEQ_printf(m, "Broadcast device\n");
-- 
2.14.1

[PATCH AUTOSEL for 4.4 027/115] timers, sched_clock: Update timeout for clock wrap

[Sasha Levin]

From: David Engraf <david.engraf@sysgo.com>

[ Upstream commit 1b8955bc5ac575009835e371ae55e7f3af2197a9 ]

The scheduler clock framework may not use the correct timeout for the clock
wrap. This happens when a new clock driver calls sched_clock_register()
after the kernel called sched_clock_postinit(). In this case the clock wrap
timeout is too long thus sched_clock_poll() is called too late and the clock
already wrapped.

On my ARM system the scheduler was no longer scheduling any other task than
the idle task because the sched_clock() wrapped.

Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/time/sched_clock.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/time/sched_clock.c b/kernel/time/sched_clock.c
index a26036d37a38..382b159d8592 100644
--- a/kernel/time/sched_clock.c
+++ b/kernel/time/sched_clock.c
@@ -205,6 +205,11 @@ sched_clock_register(u64 (*read)(void), int bits, unsigned long rate)
 
 	update_clock_read_data(&rd);
 
+	if (sched_clock_timer.function != NULL) {
+		/* update timeout for clock wrap */
+		hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL);
+	}
+
 	r = rate;
 	if (r >= 4000000) {
 		r /= 1000000;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 029/115] Input: qt1070 - add OF device ID table

[Sasha Levin]

From: Javier Martinez Canillas <javier@osg.samsung.com>

[ Upstream commit cf5cd9d4480a87da78768718cac194a71079b5cb ]

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

The compatible strings don't have a vendor prefix because that's how it's
used currently, and changing this will be a Device Tree ABI break.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/keyboard/qt1070.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
index 5a5778729e37..76bb51309a78 100644
--- a/drivers/input/keyboard/qt1070.c
+++ b/drivers/input/keyboard/qt1070.c
@@ -274,9 +274,18 @@ static const struct i2c_device_id qt1070_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, qt1070_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id qt1070_of_match[] = {
+	{ .compatible = "qt1070", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qt1070_of_match);
+#endif
+
 static struct i2c_driver qt1070_driver = {
 	.driver	= {
 		.name	= "qt1070",
+		.of_match_table = of_match_ptr(qt1070_of_match),
 		.pm	= &qt1070_pm_ops,
 	},
 	.id_table	= qt1070_id,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 030/115] sched: act_csum: don't mangle TCP and UDP GSO packets

[Sasha Levin]

From: Davide Caratti <dcaratti@redhat.com>

[ Upstream commit add641e7dee31b36aee83412c29e39dd1f5e0c9c ]

after act_csum computes the checksum on skbs carrying GSO TCP/UDP packets,
subsequent segmentation fails because skb_needs_check(skb, true) returns
true. Because of that, skb_warn_bad_offload() is invoked and the following
message is displayed:

WARNING: CPU: 3 PID: 28 at net/core/dev.c:2553 skb_warn_bad_offload+0xf0/0xfd
<...>

  [<ffffffff8171f486>] skb_warn_bad_offload+0xf0/0xfd
  [<ffffffff8161304c>] __skb_gso_segment+0xec/0x110
  [<ffffffff8161340d>] validate_xmit_skb+0x12d/0x2b0
  [<ffffffff816135d2>] validate_xmit_skb_list+0x42/0x70
  [<ffffffff8163c560>] sch_direct_xmit+0xd0/0x1b0
  [<ffffffff8163c760>] __qdisc_run+0x120/0x270
  [<ffffffff81613b3d>] __dev_queue_xmit+0x23d/0x690
  [<ffffffff81613fa0>] dev_queue_xmit+0x10/0x20

Since GSO is able to compute checksum on individual segments of such skbs,
we can simply skip mangling the packet.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sched/act_csum.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/net/sched/act_csum.c b/net/sched/act_csum.c
index eeb3eb3ea9eb..024d6cf342c5 100644
--- a/net/sched/act_csum.c
+++ b/net/sched/act_csum.c
@@ -175,6 +175,9 @@ static int tcf_csum_ipv4_tcp(struct sk_buff *skb,
 	struct tcphdr *tcph;
 	const struct iphdr *iph;
 
+	if (skb_is_gso(skb) && skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
+		return 1;
+
 	tcph = tcf_csum_skb_nextlayer(skb, ihl, ipl, sizeof(*tcph));
 	if (tcph == NULL)
 		return 0;
@@ -196,6 +199,9 @@ static int tcf_csum_ipv6_tcp(struct sk_buff *skb,
 	struct tcphdr *tcph;
 	const struct ipv6hdr *ip6h;
 
+	if (skb_is_gso(skb) && skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
+		return 1;
+
 	tcph = tcf_csum_skb_nextlayer(skb, ihl, ipl, sizeof(*tcph));
 	if (tcph == NULL)
 		return 0;
@@ -219,6 +225,9 @@ static int tcf_csum_ipv4_udp(struct sk_buff *skb,
 	const struct iphdr *iph;
 	u16 ul;
 
+	if (skb_is_gso(skb) && skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
+		return 1;
+
 	/*
 	 * Support both UDP and UDPLITE checksum algorithms, Don't use
 	 * udph->len to get the real length without any protocol check,
@@ -272,6 +281,9 @@ static int tcf_csum_ipv6_udp(struct sk_buff *skb,
 	const struct ipv6hdr *ip6h;
 	u16 ul;
 
+	if (skb_is_gso(skb) && skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
+		return 1;
+
 	/*
 	 * Support both UDP and UDPLITE checksum algorithms, Don't use
 	 * udph->len to get the real length without any protocol check,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 031/115] ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 6b8530cc056efd4a11b034ca5b1e9f7e9563f553 ]

R-Car Datasheet is indicating "SSICR.CKDV = 000 is invalid when
SSIWSR.WS_MODE = 1 or SSIWSR.CONT = 1".
Current driver will set CONT, thus, we shouldn't use CKDV = 000.
This patch fixup it.

Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/sh/rcar/ssi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 38aae96267c9..a001331a53c1 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -142,6 +142,15 @@ static int rsnd_ssi_master_clk_start(struct rsnd_ssi *ssi,
 	 */
 	for (j = 0; j < ARRAY_SIZE(ssi_clk_mul_table); j++) {
 
+		/*
+		 * It will set SSIWSR.CONT here, but SSICR.CKDV = 000
+		 * with it is not allowed. (SSIWSR.WS_MODE with
+		 * SSICR.CKDV = 000 is not allowed either).
+		 * Skip it. See SSICR.CKDV
+		 */
+		if (j == 0)
+			continue;
+
 		/*
 		 * this driver is assuming that
 		 * system word is 64fs (= 2 x 32bit)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 033/115] tcp: sysctl: Fix a race to avoid unexpected 0 window from space

[Sasha Levin]

From: Gao Feng <fgao@ikuai8.com>

[ Upstream commit c48367427a39ea0b85c7cf018fe4256627abfd9e ]

Because sysctl_tcp_adv_win_scale could be changed any time, so there
is one race in tcp_win_from_space.
For example,
1.sysctl_tcp_adv_win_scale<=0 (sysctl_tcp_adv_win_scale is negative now)
2.space>>(-sysctl_tcp_adv_win_scale) (sysctl_tcp_adv_win_scale is postive now)

As a result, tcp_win_from_space returns 0. It is unexpected.

Certainly if the compiler put the sysctl_tcp_adv_win_scale into one
register firstly, then use the register directly, it would be ok.
But we could not depend on the compiler behavior.

Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/net/tcp.h | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index cecb0e0eff06..a3696b778757 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1199,9 +1199,11 @@ void tcp_select_initial_window(int __space, __u32 mss, __u32 *rcv_wnd,
 
 static inline int tcp_win_from_space(int space)
 {
-	return sysctl_tcp_adv_win_scale<=0 ?
-		(space>>(-sysctl_tcp_adv_win_scale)) :
-		space - (space>>sysctl_tcp_adv_win_scale);
+	int tcp_adv_win_scale = sysctl_tcp_adv_win_scale;
+
+	return tcp_adv_win_scale <= 0 ?
+		(space>>(-tcp_adv_win_scale)) :
+		space - (space>>tcp_adv_win_scale);
 }
 
 /* Note: caller must be prepared to deal with negative returns */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 032/115] spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer

[Sasha Levin]

From: Akinobu Mita <akinobu.mita@gmail.com>

[ Upstream commit 812613591cb652344186c4cd912304ed02138566 ]

When running the spi-loopback-test with slower clock rate like 10 KHz,
the test for 251 bytes transfer was failed.  This failure triggered an
spi-omap2-mcspi's error message "DMA RX last word empty".

This message means that PIO for reading the remaining bytes due to the
DMA transfer length reduction is failed.  This problem can be fixed by
polling OMAP2_MCSPI_CHSTAT_RXS bit in channel status register to wait
until the receive buffer register is filled.

Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/spi/spi-omap2-mcspi.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index ed8283e7397a..83b53cd956aa 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -457,6 +457,8 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
 	int			elements = 0;
 	int			word_len, element_count;
 	struct omap2_mcspi_cs	*cs = spi->controller_state;
+	void __iomem		*chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
+
 	mcspi = spi_master_get_devdata(spi->master);
 	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 	count = xfer->len;
@@ -517,8 +519,8 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
 	if (l & OMAP2_MCSPI_CHCONF_TURBO) {
 		elements--;
 
-		if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
-				   & OMAP2_MCSPI_CHSTAT_RXS)) {
+		if (!mcspi_wait_for_reg_bit(chstat_reg,
+					    OMAP2_MCSPI_CHSTAT_RXS)) {
 			u32 w;
 
 			w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
@@ -536,8 +538,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
 			return count;
 		}
 	}
-	if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
-				& OMAP2_MCSPI_CHSTAT_RXS)) {
+	if (!mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS)) {
 		u32 w;
 
 		w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 034/115] dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped

[Sasha Levin]

From: Jiada Wang <jiada_wang@mentor.com>

[ Upstream commit 7f3ff14b7eb1ffad132117f08a1973b48e653d43 ]

sdma_disable_channel() cannot ensure dma is stopped to access
module's FIFOs. There is chance SDMA core is running and accessing
BD when disable of corresponding channel, this may cause sometimes
even after call of .sdma_disable_channel(), SDMA core still be
running and accessing module's FIFOs.

According to NXP R&D team a delay of one BD SDMA cost time (maximum
is 1ms) should be added after disable of the channel bit, to ensure
SDMA core has really been stopped after SDMA clients call
.device_terminate_all.

This patch introduces adds a new function sdma_disable_channel_with_delay()
which simply adds 1ms delay after call sdma_disable_channel(),
and set it as .device_terminate_all.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/imx-sdma.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 0f6fd42f55ca..f8d740a6740d 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -911,6 +911,21 @@ static int sdma_disable_channel(struct dma_chan *chan)
 	return 0;
 }
 
+static int sdma_disable_channel_with_delay(struct dma_chan *chan)
+{
+	sdma_disable_channel(chan);
+
+	/*
+	 * According to NXP R&D team a delay of one BD SDMA cost time
+	 * (maximum is 1ms) should be added after disable of the channel
+	 * bit, to ensure SDMA core has really been stopped after SDMA
+	 * clients call .device_terminate_all.
+	 */
+	mdelay(1);
+
+	return 0;
+}
+
 static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 {
 	struct sdma_engine *sdma = sdmac->sdma;
@@ -1793,7 +1808,7 @@ static int sdma_probe(struct platform_device *pdev)
 	sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg;
 	sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
 	sdma->dma_device.device_config = sdma_config;
-	sdma->dma_device.device_terminate_all = sdma_disable_channel;
+	sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay;
 	sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 036/115] driver: (adm1275) set the m,b and R coefficients correctly for power

[Sasha Levin]

From: Shikhar Dogra <shidogra@cisco.com>

[ Upstream commit 6faecba0b3da7b617bf72bef422bf0d3bb6dfe7d ]

Seems like coefficient values for m, b and R under power have been
put in the wrong order. Rearranging them properly to get correct
values of coefficients for power.

For specs, please refer to table 7 (page 35) on
http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1075.pdf

Fixes: 904b296f308d ("hwmon: (adm1275) Introduce configuration data structure for coeffcients")
Signed-off-by: Shikhar Dogra <shidogra@cisco.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hwmon/pmbus/adm1275.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 188af4c89f40..18477dd1e243 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -95,8 +95,8 @@ static const struct coefficients adm1075_coefficients[] = {
 	[0] = { 27169, 0, -1 },		/* voltage */
 	[1] = { 806, 20475, -1 },	/* current, irange25 */
 	[2] = { 404, 20475, -1 },	/* current, irange50 */
-	[3] = { 0, -1, 8549 },		/* power, irange25 */
-	[4] = { 0, -1, 4279 },		/* power, irange50 */
+	[3] = { 8549, 0, -1 },		/* power, irange25 */
+	[4] = { 4279, 0, -1 },		/* power, irange50 */
 };
 
 static const struct coefficients adm1275_coefficients[] = {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 035/115] powerpc/xmon: Fix an unexpected xmon on/off state change

[Sasha Levin]

From: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>

[ Upstream commit 3b5bf42b81d56085fd58692b5117f69aa77fdff7 ]

Once xmon is triggered by sysrq-x, it is enabled always afterwards even
if it is disabled during boot. This will cause a system reset interrupt
fail to dump. So keep xmon in its original state after exit.

We have several ways to set xmon on or off.
1) by a build config CONFIG_XMON_DEFAULT.
2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon
and xmon=off to disable xmon. This value will override that in step 1.
3) by a debugfs interface, as proposed in this patchset.
And this value can override those in step 1 and 2.

Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/xmon/xmon.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 786bf01691c9..9f08064324ce 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -71,6 +71,7 @@ static int xmon_gate;
 #endif /* CONFIG_SMP */
 
 static unsigned long in_xmon __read_mostly = 0;
+static int xmon_on = IS_ENABLED(CONFIG_XMON_DEFAULT);
 
 static unsigned long adrs;
 static int size = 1;
@@ -3041,6 +3042,8 @@ static void sysrq_handle_xmon(int key)
 	/* ensure xmon is enabled */
 	xmon_init(1);
 	debugger(get_irq_regs());
+	if (!xmon_on)
+		xmon_init(0);
 }
 
 static struct sysrq_key_op sysrq_xmon_op = {
@@ -3057,7 +3060,7 @@ static int __init setup_xmon_sysrq(void)
 __initcall(setup_xmon_sysrq);
 #endif /* CONFIG_MAGIC_SYSRQ */
 
-static int __initdata xmon_early, xmon_off;
+static int __initdata xmon_early;
 
 static int __init early_parse_xmon(char *p)
 {
@@ -3065,10 +3068,12 @@ static int __init early_parse_xmon(char *p)
 		/* just "xmon" is equivalent to "xmon=early" */
 		xmon_init(1);
 		xmon_early = 1;
-	} else if (strncmp(p, "on", 2) == 0)
+		xmon_on = 1;
+	} else if (strncmp(p, "on", 2) == 0) {
 		xmon_init(1);
-	else if (strncmp(p, "off", 3) == 0)
-		xmon_off = 1;
+		xmon_on = 1;
+	} else if (strncmp(p, "off", 3) == 0)
+		xmon_on = 0;
 	else if (strncmp(p, "nobt", 4) == 0)
 		xmon_no_auto_backtrace = 1;
 	else
@@ -3080,10 +3085,8 @@ early_param("xmon", early_parse_xmon);
 
 void __init xmon_setup(void)
 {
-#ifdef CONFIG_XMON_DEFAULT
-	if (!xmon_off)
+	if (xmon_on)
 		xmon_init(1);
-#endif
 	if (xmon_early)
 		debugger(NULL);
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 037/115] mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative()

[Sasha Levin]

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

[ Upstream commit 591a3d7c09fa08baff48ad86c2347dbd28a52753 ]

0day testing by Fengguang Wu triggered this crash while running Trinity:

  kernel BUG at include/linux/pagemap.h:151!
  ...
  CPU: 0 PID: 458 Comm: trinity-c0 Not tainted 4.11.0-rc2-00251-g2947ba0 #1
  ...
  Call Trace:
   __get_user_pages_fast()
   get_user_pages_fast()
   get_futex_key()
   futex_requeue()
   do_futex()
   SyS_futex()
   do_syscall_64()
   entry_SYSCALL64_slow_path()

It' VM_BUG_ON() due to false-negative in_atomic(). We call
page_cache_get_speculative() with disabled local interrupts.
It should be atomic enough.

So let's check for disabled interrupts in the VM_BUG_ON() condition
too, to resolve this.

( This got triggered by the conversion of the x86 GUP code to the
  generic GUP code. )

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: LKP <lkp@01.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170324114709.pcytvyb3d6ajux33@black.fi.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/pagemap.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index fbfadba81c5a..771774e13f10 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -153,7 +153,7 @@ static inline int page_cache_get_speculative(struct page *page)
 
 #ifdef CONFIG_TINY_RCU
 # ifdef CONFIG_PREEMPT_COUNT
-	VM_BUG_ON(!in_atomic());
+	VM_BUG_ON(!in_atomic() && !irqs_disabled());
 # endif
 	/*
 	 * Preempt must be disabled here - we rely on rcu_read_lock doing
@@ -191,7 +191,7 @@ static inline int page_cache_add_speculative(struct page *page, int count)
 
 #if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
 # ifdef CONFIG_PREEMPT_COUNT
-	VM_BUG_ON(!in_atomic());
+	VM_BUG_ON(!in_atomic() && !irqs_disabled());
 # endif
 	VM_BUG_ON_PAGE(page_count(page) == 0, page);
 	atomic_add(count, &page->_count);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 038/115] blk-throttle: make sure expire time isn't too big

[Sasha Levin]

From: Shaohua Li <shli@fb.com>

[ Upstream commit 06cceedcca67a93ac7f7aa93bbd9980c7496d14e ]

cgroup could be throttled to a limit but when all cgroups cross high
limit, queue enters a higher state and so the group should be throttled
to a higher limit. It's possible the cgroup is sleeping because of
throttle and other cgroups don't dispatch IO any more. In this case,
nobody can trigger current downgrade/upgrade logic. To fix this issue,
we could either set up a timer to wakeup the cgroup if other cgroups are
idle or make sure this cgroup doesn't sleep too long. Setting up a timer
means we must change the timer very frequently. This patch chooses the
latter. Making cgroup sleep time not too big wouldn't change cgroup
bps/iops, but could make it wakeup more frequently, which isn't a big
issue because throtl_slice * 8 is already quite big.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/blk-throttle.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 2149a1ddbacf..17bdd6b55beb 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -505,6 +505,17 @@ static void throtl_dequeue_tg(struct throtl_grp *tg)
 static void throtl_schedule_pending_timer(struct throtl_service_queue *sq,
 					  unsigned long expires)
 {
+	unsigned long max_expire = jiffies + 8 * throtl_slice;
+
+	/*
+	 * Since we are adjusting the throttle limit dynamically, the sleep
+	 * time calculated according to previous limit might be invalid. It's
+	 * possible the cgroup sleep time is very long and no other cgroups
+	 * have IO running so notify the limit changes. Make sure the cgroup
+	 * doesn't sleep too long to avoid the missed notification.
+	 */
+	if (time_after(expires, max_expire))
+		expires = max_expire;
 	mod_timer(&sq->pending_timer, expires);
 	throtl_log(sq, "schedule timer. delay=%lu jiffies=%lu",
 		   expires - jiffies, jiffies);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 039/115] ARM: DRA7: hwmod_data: Prevent wait_target_disable error for usb_otg_ss

[Sasha Levin]

From: Roger Quadros <rogerq@ti.com>

[ Upstream commit e2d54fe76997301b49311bde7ba8ef52b47896f9 ]

It seems that if L3_INIT clkdomain is kept in HW_AUTO while usb_otg_ss
is in use then there are random chances that the usb_otg_ss module
will fail to completely idle. i.e. IDLEST = 0x2 instead of 0x3.

Preventing L3_INIT from HW_AUTO while usb_otg_ss module is in use
fixes this issue.

We don't know yet if usb_otg_ss instances 3 and 4 are affected by this
issue or not so don't add this flag for those instances.

Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index ee4e04434a94..692c93da5807 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2240,6 +2240,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
 	.class		= &dra7xx_usb_otg_ss_hwmod_class,
 	.clkdm_name	= "l3init_clkdm",
 	.main_clk	= "dpll_core_h13x2_ck",
+	.flags		= HWMOD_CLKDM_NOAUTO,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
@@ -2261,6 +2262,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
 	.class		= &dra7xx_usb_otg_ss_hwmod_class,
 	.clkdm_name	= "l3init_clkdm",
 	.main_clk	= "dpll_core_h13x2_ck",
+	.flags		= HWMOD_CLKDM_NOAUTO,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 041/115] bonding: refine bond_fold_stats() wrap detection

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 142c6594acbcc32391af9c15f8cd65c6c177698f ]

Some device drivers reset their stats at down/up events, possibly
fooling bonding stats, since they operate with relative deltas.

It is nearly not possible to fix drivers, since some of them compute the
tx/rx counters based on per rx/tx queue stats, and the queues can be
reconfigured (ethtool -L) between the down/up sequence.

Lets avoid accumulating 'negative' values that render bonding stats
useless.

It is better to lose small deltas, assuming the bonding stats are
fetched at a reasonable frequency.

Fixes: 5f0c5f73e5ef ("bonding: make global bonding stats more reliable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/bonding/bond_main.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2cb34b0f3856..eadccf498589 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3276,12 +3276,17 @@ static void bond_fold_stats(struct rtnl_link_stats64 *_res,
 	for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) {
 		u64 nv = new[i];
 		u64 ov = old[i];
+		s64 delta = nv - ov;
 
 		/* detects if this particular field is 32bit only */
 		if (((nv | ov) >> 32) == 0)
-			res[i] += (u32)nv - (u32)ov;
-		else
-			res[i] += nv - ov;
+			delta = (s64)(s32)((u32)nv - (u32)ov);
+
+		/* filter anomalies, some drivers reset their stats
+		 * at down/up events.
+		 */
+		if (delta > 0)
+			res[i] += delta;
 	}
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 040/115] f2fs: relax node version check for victim data in gc

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit c13ff37e359bb3eacf4e1760dcea8d9760aa7459 ]

- has_not_enough_free_secs
node_secs: 0  dent_secs: 0  freed:0  free_segments:103  reserved:104

          - f2fs_gc
             - get_victim_by_default
alloc_mode 0, gc_mode 1, max_search 2672, offset 4654, ofs_unit 1

                - do_garbage_collect
start_segno 3976, end_segno 3977   type 0

                  - is_alive
nid 22797, blkaddr 2131882, ofs_in_node 0, version 0x8/0x0

                   - gc_data_segment 766, segno 3976, block 512/426 not alive

So, this patch fixes subtle corrupted case where node version does not match
to summary version which results in infinite loop by gc.

Reported-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/f2fs/gc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index fedbf67a0842..928b9e046d8a 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -522,8 +522,10 @@ static bool is_alive(struct f2fs_sb_info *sbi, struct f2fs_summary *sum,
 	get_node_info(sbi, nid, dni);
 
 	if (sum->version != dni->version) {
-		f2fs_put_page(node_page, 1);
-		return false;
+		f2fs_msg(sbi->sb, KERN_WARNING,
+				"%s: valid data with mismatched node version.",
+				__func__);
+		set_sbi_flag(sbi, SBI_NEED_FSCK);
 	}
 
 	*nofs = ofs_of_node(node_page);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 043/115] braille-console: Fix value returned by _braille_console_setup

[Sasha Levin]

From: Samuel Thibault <samuel.thibault@ens-lyon.org>

[ Upstream commit 2ed2b8621be2708c0f6d61fe9841e9ad8b9753f0 ]

commit bbeddf52adc1 ("printk: move braille console support into
separate braille.[ch] files") introduced _braille_console_setup()
to outline the braille initialization code.  There was however some
confusion over the value it was supposed to return. commit 2cfe6c4ac7ee
("printk: Fix return of braille_register_console()") tried to fix it
but failed to.

This fixes and documents the returned value according to the use
in printk.c: non-zero return means a parsing error, and thus this
console configuration should be ignored.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Aleksey Makarov <aleksey.makarov@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/printk/braille.c | 15 ++++++++-------
 kernel/printk/braille.h | 13 ++++++++++---
 2 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/kernel/printk/braille.c b/kernel/printk/braille.c
index d5760c42f042..61d41ca41844 100644
--- a/kernel/printk/braille.c
+++ b/kernel/printk/braille.c
@@ -2,12 +2,13 @@
 
 #include <linux/kernel.h>
 #include <linux/console.h>
+#include <linux/errno.h>
 #include <linux/string.h>
 
 #include "console_cmdline.h"
 #include "braille.h"
 
-char *_braille_console_setup(char **str, char **brl_options)
+int _braille_console_setup(char **str, char **brl_options)
 {
 	if (!strncmp(*str, "brl,", 4)) {
 		*brl_options = "";
@@ -15,14 +16,14 @@ char *_braille_console_setup(char **str, char **brl_options)
 	} else if (!strncmp(*str, "brl=", 4)) {
 		*brl_options = *str + 4;
 		*str = strchr(*brl_options, ',');
-		if (!*str)
+		if (!*str) {
 			pr_err("need port name after brl=\n");
-		else
-			*((*str)++) = 0;
-	} else
-		return NULL;
+			return -EINVAL;
+		}
+		*((*str)++) = 0;
+	}
 
-	return *str;
+	return 0;
 }
 
 int
diff --git a/kernel/printk/braille.h b/kernel/printk/braille.h
index 769d771145c8..749a6756843a 100644
--- a/kernel/printk/braille.h
+++ b/kernel/printk/braille.h
@@ -9,7 +9,14 @@ braille_set_options(struct console_cmdline *c, char *brl_options)
 	c->brl_options = brl_options;
 }
 
-char *
+/*
+ * Setup console according to braille options.
+ * Return -EINVAL on syntax error, 0 on success (or no braille option was
+ * actually given).
+ * Modifies str to point to the serial options
+ * Sets brl_options to the parsed braille options.
+ */
+int
 _braille_console_setup(char **str, char **brl_options);
 
 int
@@ -25,10 +32,10 @@ braille_set_options(struct console_cmdline *c, char *brl_options)
 {
 }
 
-static inline char *
+static inline int
 _braille_console_setup(char **str, char **brl_options)
 {
-	return NULL;
+	return 0;
 }
 
 static inline int
-- 
2.14.1

[PATCH AUTOSEL for 4.4 044/115] drm/vmwgfx: Fixes to vmwgfx_fb

[Sasha Levin]

From: Sinclair Yeh <syeh@vmware.com>

[ Upstream commit aa74f0687cfe998e59b20d6454f45e8aa4403c45 ]

1.  When unsetting a mode, num_connector should be set to zero
2.  The pixel_format field needs to be initialized as newer DRM internal
    functions checks this field
3.  Take the drm_modeset_lock_all() because vmw_fb_kms_detach() can
    change current mode

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_fb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index d2d93959b119..aec6e9eef489 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -433,7 +433,7 @@ static int vmw_fb_kms_detach(struct vmw_fb_par *par,
 		set.y = 0;
 		set.mode = NULL;
 		set.fb = NULL;
-		set.num_connectors = 1;
+		set.num_connectors = 0;
 		set.connectors = &par->con;
 		ret = drm_mode_set_config_internal(&set);
 		if (ret) {
@@ -821,7 +821,9 @@ int vmw_fb_off(struct vmw_private *vmw_priv)
 	flush_delayed_work(&par->local_work);
 
 	mutex_lock(&par->bo_mutex);
+	drm_modeset_lock_all(vmw_priv->dev);
 	(void) vmw_fb_kms_detach(par, true, false);
+	drm_modeset_unlock_all(vmw_priv->dev);
 	mutex_unlock(&par->bo_mutex);
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 045/115] vxlan: vxlan dev should inherit lowerdev's gso_max_size

[Sasha Levin]

From: Felix Manlunas <felix.manlunas@cavium.com>

[ Upstream commit d6acfeb17d030bb3907e77c048b0e7783ad8e5a9 ]

vxlan dev currently ignores lowerdev's gso_max_size, which adversely
affects TSO performance of liquidio if it's the lowerdev.  Egress TCP
packets' skb->len often exceed liquidio's advertised gso_max_size.  This
may happen on other NIC drivers.

Fix it by assigning lowerdev's gso_max_size to that of vxlan dev.  Might as
well do likewise for gso_max_segs.

Single flow TSO throughput of liquidio as lowerdev (using iperf3):

    Before the patch:    139 Mbps
    After the patch :   8.68 Gbps
    Percent increase:  6,144 %

Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/vxlan.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index dab3bf6649e6..e4ff1e45c02e 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2834,6 +2834,11 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev,
 		needed_headroom = lowerdev->hard_header_len;
 	}
 
+	if (lowerdev) {
+		dev->gso_max_size = lowerdev->gso_max_size;
+		dev->gso_max_segs = lowerdev->gso_max_segs;
+	}
+
 	if (conf->mtu) {
 		err = __vxlan_change_mtu(dev, lowerdev, dst, conf->mtu, false);
 		if (err)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 046/115] NFC: nfcmrvl: Include unaligned.h instead of access_ok.h

[Sasha Levin]

From: Tobias Klauser <tklauser@distanz.ch>

[ Upstream commit d916d923724d59cde99ee588f15eec59dd863bbd ]

Including linux/unaligned/access_ok.h causes the allmodconfig build on
ia64 (and maybe others) to fail with the following warnings:

include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16'
include/linux/unaligned/access_ok.h:12:19: error: redefinition of 'get_unaligned_le32'
include/linux/unaligned/access_ok.h:17:19: error: redefinition of 'get_unaligned_le64'
include/linux/unaligned/access_ok.h:22:19: error: redefinition of 'get_unaligned_be16'
include/linux/unaligned/access_ok.h:27:19: error: redefinition of 'get_unaligned_be32'
include/linux/unaligned/access_ok.h:32:19: error: redefinition of 'get_unaligned_be64'
include/linux/unaligned/access_ok.h:37:20: error: redefinition of 'put_unaligned_le16'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le32'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le64'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be16'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be32'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be64'

Fix these by including asm/unaligned.h instead and leave it up to the
architecture to decide how to implement unaligned accesses.

Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Link: https://lkml.org/lkml/2016/10/22/247
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/nfc/nfcmrvl/fw_dnld.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/nfcmrvl/fw_dnld.c b/drivers/nfc/nfcmrvl/fw_dnld.c
index af62c4c854f3..b4f31dad40d6 100644
--- a/drivers/nfc/nfcmrvl/fw_dnld.c
+++ b/drivers/nfc/nfcmrvl/fw_dnld.c
@@ -17,7 +17,7 @@
  */
 
 #include <linux/module.h>
-#include <linux/unaligned/access_ok.h>
+#include <asm/unaligned.h>
 #include <linux/firmware.h>
 #include <linux/nfc.h>
 #include <net/nfc/nci.h>
-- 
2.14.1

[PATCH AUTOSEL for 4.4 048/115] ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit d13d4e063d4a08eb1686e890e9183dde709871bf ]

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: bcde372254386872 ("ARM: shmobile: r8a7790: add MSTP10 support on DTSI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 7b39d8fae61e..bd83a61f724f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1360,8 +1360,11 @@
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 047/115] NFC: nfcmrvl: double free on error path

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ca42fb9e52d155547e6cf18cf26bce3e1a6af4ea ]

The nci_spi_send() function calls kfree_skb(skb) on both error and
success so this extra kfree_skb() is a double free.

Fixes: caf6e49bf6d0 ("NFC: nfcmrvl: add spi driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/nfc/nfcmrvl/spi.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/nfc/nfcmrvl/spi.c b/drivers/nfc/nfcmrvl/spi.c
index a7faa0bcc01e..fc8e78a29d77 100644
--- a/drivers/nfc/nfcmrvl/spi.c
+++ b/drivers/nfc/nfcmrvl/spi.c
@@ -96,10 +96,9 @@ static int nfcmrvl_spi_nci_send(struct nfcmrvl_private *priv,
 	/* Send the SPI packet */
 	err = nci_spi_send(drv_data->nci_spi, &drv_data->handshake_completion,
 			   skb);
-	if (err != 0) {
+	if (err)
 		nfc_err(priv->dev, "spi_send failed %d", err);
-		kfree_skb(skb);
-	}
+
 	return err;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 050/115] powerpc: Avoid taking a data miss on every userspace instruction miss

[Sasha Levin]

From: Anton Blanchard <anton@samba.org>

[ Upstream commit a7a9dcd882a67b68568868b988289fce5ffd8419 ]

Early on in do_page_fault() we call store_updates_sp(), regardless of
the type of exception. For an instruction miss this doesn't make
sense, because we only use this information to detect if a data miss
is the result of a stack expansion instruction or not.

Worse still, it results in a data miss within every userspace
instruction miss handler, because we try and load the very instruction
we are about to install a pte for!

A simple exec microbenchmark runs 6% faster on POWER8 with this fix:

 #include <stdlib.h>
 #include <stdio.h>
 #include <unistd.h>

int main(int argc, char *argv[])
{
	unsigned long left = atol(argv[1]);
	char leftstr[16];

	if (left-- == 0)
		return 0;

	sprintf(leftstr, "%ld", left);
	execlp(argv[0], argv[0], leftstr, NULL);
	perror("exec failed\n");

	return 0;
}

Pass the number of iterations on the command line (eg 10000) and time
how long it takes to execute.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/mm/fault.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index a67c6d781c52..d154e333f76b 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -294,7 +294,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * can result in fault, which will cause a deadlock when called with
 	 * mmap_sem held
 	 */
-	if (user_mode(regs))
+	if (!is_exec && user_mode(regs))
 		store_update_sp = store_updates_sp(regs);
 
 	if (user_mode(regs))
-- 
2.14.1

[PATCH AUTOSEL for 4.4 049/115] ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 16fe68dcab5702a024d85229ff7e98979cb701a5 ]

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: ee9141522dcf13f8 ("ARM: shmobile: r8a7791: add MSTP10 support on DTSI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/r8a7791.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 328f48bd15e7..d2585a4c6098 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1374,8 +1374,11 @@
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 052/115] ARM: dts: koelsch: Correct clock frequency of X2 DU clock input

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit ebf06af55c7594ed1fc18469a5cddf911c40e687 ]

The X2 crystal oscillator on the Koelsch development board provides a
74.25 MHz clock, not a 148.5 MHz clock.

Fixes: cd21cb46e14aae3a ("ARM: shmobile: koelsch: Add DU external pixel clocks to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fc44ea361a4b..62eae315af1f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -280,7 +280,7 @@
 	x2_clk: x2-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <148500000>;
+		clock-frequency = <74250000>;
 	};
 
 	x13_clk: x13-clock {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 051/115] net/faraday: Add missing include of of.h

[Sasha Levin]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit d39004ab136ebb6949a7dda9d24376f3d6209295 ]

Breaking the include loop netdevice.h, dsa.h, devlink.h broke this
driver, it depends on includes brought in by these headers. Adding
linux/of.h fixes it.

Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 6d0c5d5eea6d..58c0fccdd8cb 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
+#include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <net/ip.h>
-- 
2.14.1

[PATCH AUTOSEL for 4.4 053/115] reiserfs: Make cancel_old_flush() reliable

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 71b0576bdb862e964a82c73327cdd1a249c53e67 ]

Currently canceling of delayed work that flushes old data using
cancel_old_flush() does not prevent work from being requeued. Thus
in theory new work can be queued after cancel_old_flush() from
reiserfs_freeze() has run. This will become larger problem once
flush_old_commits() can requeue the work itself.

Fix the problem by recording in sbi->work_queue that flushing work is
canceled and should not be requeued.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/reiserfs/journal.c  |  2 +-
 fs/reiserfs/reiserfs.h |  1 +
 fs/reiserfs/super.c    | 21 +++++++++++++++------
 3 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 9d6486d416a3..a72097b625ef 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -1961,7 +1961,7 @@ static int do_journal_release(struct reiserfs_transaction_handle *th,
 	 * will be requeued because superblock is being shutdown and doesn't
 	 * have MS_ACTIVE set.
 	 */
-	cancel_delayed_work_sync(&REISERFS_SB(sb)->old_work);
+	reiserfs_cancel_old_flush(sb);
 	/* wait for all commits to finish */
 	cancel_delayed_work_sync(&SB_JOURNAL(sb)->j_work);
 
diff --git a/fs/reiserfs/reiserfs.h b/fs/reiserfs/reiserfs.h
index 5dcf3ab83886..6ca00471afbf 100644
--- a/fs/reiserfs/reiserfs.h
+++ b/fs/reiserfs/reiserfs.h
@@ -2948,6 +2948,7 @@ int reiserfs_allocate_list_bitmaps(struct super_block *s,
 				   struct reiserfs_list_bitmap *, unsigned int);
 
 void reiserfs_schedule_old_flush(struct super_block *s);
+void reiserfs_cancel_old_flush(struct super_block *s);
 void add_save_link(struct reiserfs_transaction_handle *th,
 		   struct inode *inode, int truncate);
 int remove_save_link(struct inode *inode, int truncate);
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index f9f3be50081a..ee095246da4e 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -90,7 +90,9 @@ static void flush_old_commits(struct work_struct *work)
 	s = sbi->s_journal->j_work_sb;
 
 	spin_lock(&sbi->old_work_lock);
-	sbi->work_queued = 0;
+	/* Avoid clobbering the cancel state... */
+	if (sbi->work_queued == 1)
+		sbi->work_queued = 0;
 	spin_unlock(&sbi->old_work_lock);
 
 	reiserfs_sync_fs(s, 1);
@@ -117,21 +119,22 @@ void reiserfs_schedule_old_flush(struct super_block *s)
 	spin_unlock(&sbi->old_work_lock);
 }
 
-static void cancel_old_flush(struct super_block *s)
+void reiserfs_cancel_old_flush(struct super_block *s)
 {
 	struct reiserfs_sb_info *sbi = REISERFS_SB(s);
 
-	cancel_delayed_work_sync(&REISERFS_SB(s)->old_work);
 	spin_lock(&sbi->old_work_lock);
-	sbi->work_queued = 0;
+	/* Make sure no new flushes will be queued */
+	sbi->work_queued = 2;
 	spin_unlock(&sbi->old_work_lock);
+	cancel_delayed_work_sync(&REISERFS_SB(s)->old_work);
 }
 
 static int reiserfs_freeze(struct super_block *s)
 {
 	struct reiserfs_transaction_handle th;
 
-	cancel_old_flush(s);
+	reiserfs_cancel_old_flush(s);
 
 	reiserfs_write_lock(s);
 	if (!(s->s_flags & MS_RDONLY)) {
@@ -152,7 +155,13 @@ static int reiserfs_freeze(struct super_block *s)
 
 static int reiserfs_unfreeze(struct super_block *s)
 {
+	struct reiserfs_sb_info *sbi = REISERFS_SB(s);
+
 	reiserfs_allow_writes(s);
+	spin_lock(&sbi->old_work_lock);
+	/* Allow old_work to run again */
+	sbi->work_queued = 0;
+	spin_unlock(&sbi->old_work_lock);
 	return 0;
 }
 
@@ -2187,7 +2196,7 @@ error_unlocked:
 	if (sbi->commit_wq)
 		destroy_workqueue(sbi->commit_wq);
 
-	cancel_delayed_work_sync(&REISERFS_SB(s)->old_work);
+	reiserfs_cancel_old_flush(s);
 
 	reiserfs_free_bitmap_cache(s);
 	if (SB_BUFFER_WITH_SB(s))
-- 
2.14.1

[PATCH AUTOSEL for 4.4 054/115] ASoc: rt5645: Add OF device ID table

[Sasha Levin]

From: Javier Martinez Canillas <javier@osg.samsung.com>

[ Upstream commit 9ba2da5f5d18daaa365ab5426b05e16f1d114786 ]

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias
alias:          acpi*:10EC3270:*
alias:          acpi*:10EC5640:*
alias:          acpi*:10EC5650:*
alias:          acpi*:10EC5648:*
alias:          acpi*:10EC5645:*
alias:          i2c:rt5650
alias:          i2c:rt5645

After this patch:

$ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias
alias:          of:N*T*Crealtek,rt5650C*
alias:          of:N*T*Crealtek,rt5650
alias:          of:N*T*Crealtek,rt5645C*
alias:          of:N*T*Crealtek,rt5645
alias:          acpi*:10EC3270:*
alias:          acpi*:10EC5640:*
alias:          acpi*:10EC5650:*
alias:          acpi*:10EC5648:*
alias:          acpi*:10EC5645:*
alias:          i2c:rt5650
alias:          i2c:rt5645

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/codecs/rt5645.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index b74840b5becf..327f390be09e 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3329,6 +3329,15 @@ static const struct i2c_device_id rt5645_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id rt5645_of_match[] = {
+	{ .compatible = "realtek,rt5645", },
+	{ .compatible = "realtek,rt5650", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rt5645_of_match);
+#endif
+
 #ifdef CONFIG_ACPI
 static struct acpi_device_id rt5645_acpi_match[] = {
 	{ "10EC5645", 0 },
@@ -3702,6 +3711,7 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c)
 static struct i2c_driver rt5645_i2c_driver = {
 	.driver = {
 		.name = "rt5645",
+		.of_match_table = of_match_ptr(rt5645_of_match),
 		.acpi_match_table = ACPI_PTR(rt5645_acpi_match),
 	},
 	.probe = rt5645_i2c_probe,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 055/115] ASoC: ssm4567: Add OF device ID table

[Sasha Levin]

From: Javier Martinez Canillas <javier@osg.samsung.com>

[ Upstream commit 71c314d7ef2442cd798584a3dece8151215e1777 ]

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-ssm4567.ko | grep alias
alias:          acpi*:INT343B:*
alias:          i2c:ssm4567

After this patch:

$ modinfo sound/soc/codecs/snd-soc-ssm4567.ko | grep alias
alias:          acpi*:INT343B:*
alias:          of:N*T*Cadi,ssm4567C*
alias:          of:N*T*Cadi,ssm4567
alias:          i2c:ssm4567

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/codecs/ssm4567.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/soc/codecs/ssm4567.c b/sound/soc/codecs/ssm4567.c
index 080c78e88e10..c2446489c422 100644
--- a/sound/soc/codecs/ssm4567.c
+++ b/sound/soc/codecs/ssm4567.c
@@ -483,6 +483,14 @@ static const struct i2c_device_id ssm4567_i2c_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ssm4567_i2c_ids);
 
+#ifdef CONFIG_OF
+static const struct of_device_id ssm4567_of_match[] = {
+	{ .compatible = "adi,ssm4567", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ssm4567_of_match);
+#endif
+
 #ifdef CONFIG_ACPI
 
 static const struct acpi_device_id ssm4567_acpi_match[] = {
@@ -496,6 +504,7 @@ MODULE_DEVICE_TABLE(acpi, ssm4567_acpi_match);
 static struct i2c_driver ssm4567_driver = {
 	.driver = {
 		.name = "ssm4567",
+		.of_match_table = of_match_ptr(ssm4567_of_match),
 		.acpi_match_table = ACPI_PTR(ssm4567_acpi_match),
 	},
 	.probe = ssm4567_i2c_probe,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 056/115] ASoC: wm8978: Add OF device ID table

[Sasha Levin]

From: Javier Martinez Canillas <javier@osg.samsung.com>

[ Upstream commit 5cf015d9cb02c360582b624497b0a1716881cf28 ]

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-wm8978.ko | grep alias
alias:          i2c:wm8978

After this patch:

$ modinfo sound/soc/codecs/snd-soc-wm8978.ko | grep alias
alias:          i2c:wm8978
alias:          of:N*T*Cwlf,wm8978C*
alias:          of:N*T*Cwlf,wm8978

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/codecs/wm8978.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index d36d6001fbb7..c4059c330077 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -1069,9 +1069,16 @@ static const struct i2c_device_id wm8978_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, wm8978_i2c_id);
 
+static const struct of_device_id wm8978_of_match[] = {
+	{ .compatible = "wlf,wm8978", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wm8978_of_match);
+
 static struct i2c_driver wm8978_i2c_driver = {
 	.driver = {
 		.name = "wm8978",
+		.of_match_table = wm8978_of_match,
 	},
 	.probe =    wm8978_i2c_probe,
 	.remove =   wm8978_i2c_remove,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 057/115] ALSA: firewire-digi00x: handle all MIDI messages on streaming packets

[Sasha Levin]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit 8820a4cf0cb4cd5c6540a9a18b2cedbdfd5a6891 ]

At a commit 9dc5d31cdceb ("ALSA: firewire-digi00x: handle MIDI messages in
isochronous packets"), a functionality to handle MIDI messages on
isochronous packet was supported. But this includes some of my
misunderstanding. This commit is to fix them.

For digi00x series, first data channel of data blocks in rx/tx packet
includes MIDI messages. The data channel has 0x80 in 8 bit of its MSB,
however it's against IEC 61883-6. Unique data format is applied:
 - Upper 4 bits of LSB represent port number.
  - 0x0: port 1.
  - 0x2: port 2.
  - 0xe: console port.
 - Lower 4 bits of LSB represent the number of included MIDI message bytes;
   0x0/0x1/0x2.
 - Two bytes of middle of this data channel have MIDI bytes.

Especially, MIDI messages from/to console surface are also transferred by
isochronous packets, as well as physical MIDI ports.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/firewire/digi00x/amdtp-dot.c | 55 +++++++++++++++++++++++++-------------
 1 file changed, 37 insertions(+), 18 deletions(-)

diff --git a/sound/firewire/digi00x/amdtp-dot.c b/sound/firewire/digi00x/amdtp-dot.c
index b02a5e8cad44..30e4925bf6b0 100644
--- a/sound/firewire/digi00x/amdtp-dot.c
+++ b/sound/firewire/digi00x/amdtp-dot.c
@@ -28,6 +28,9 @@
  */
 #define MAX_MIDI_RX_BLOCKS	8
 
+/* 3 = MAX(DOT_MIDI_IN_PORTS, DOT_MIDI_OUT_PORTS) + 1. */
+#define MAX_MIDI_PORTS		3
+
 /*
  * The double-oh-three algorithm was discovered by Robin Gareus and Damien
  * Zammit in 2012, with reverse-engineering for Digi 003 Rack.
@@ -42,10 +45,8 @@ struct amdtp_dot {
 	unsigned int pcm_channels;
 	struct dot_state state;
 
-	unsigned int midi_ports;
-	/* 2 = MAX(DOT_MIDI_IN_PORTS, DOT_MIDI_OUT_PORTS) */
-	struct snd_rawmidi_substream *midi[2];
-	int midi_fifo_used[2];
+	struct snd_rawmidi_substream *midi[MAX_MIDI_PORTS];
+	int midi_fifo_used[MAX_MIDI_PORTS];
 	int midi_fifo_limit;
 
 	void (*transfer_samples)(struct amdtp_stream *s,
@@ -124,8 +125,8 @@ int amdtp_dot_set_parameters(struct amdtp_stream *s, unsigned int rate,
 		return -EBUSY;
 
 	/*
-	 * A first data channel is for MIDI conformant data channel, the rest is
-	 * Multi Bit Linear Audio data channel.
+	 * A first data channel is for MIDI messages, the rest is Multi Bit
+	 * Linear Audio data channel.
 	 */
 	err = amdtp_stream_set_parameters(s, rate, pcm_channels + 1);
 	if (err < 0)
@@ -135,11 +136,6 @@ int amdtp_dot_set_parameters(struct amdtp_stream *s, unsigned int rate,
 
 	p->pcm_channels = pcm_channels;
 
-	if (s->direction == AMDTP_IN_STREAM)
-		p->midi_ports = DOT_MIDI_IN_PORTS;
-	else
-		p->midi_ports = DOT_MIDI_OUT_PORTS;
-
 	/*
 	 * We do not know the actual MIDI FIFO size of most devices.  Just
 	 * assume two bytes, i.e., one byte can be received over the bus while
@@ -281,13 +277,25 @@ static void write_midi_messages(struct amdtp_stream *s, __be32 *buffer,
 		b = (u8 *)&buffer[0];
 
 		len = 0;
-		if (port < p->midi_ports &&
+		if (port < MAX_MIDI_PORTS &&
 		    midi_ratelimit_per_packet(s, port) &&
 		    p->midi[port] != NULL)
 			len = snd_rawmidi_transmit(p->midi[port], b + 1, 2);
 
 		if (len > 0) {
-			b[3] = (0x10 << port) | len;
+			/*
+			 * Upper 4 bits of LSB represent port number.
+			 * - 0000b: physical MIDI port 1.
+			 * - 0010b: physical MIDI port 2.
+			 * - 1110b: console MIDI port.
+			 */
+			if (port == 2)
+				b[3] = 0xe0;
+			else if (port == 1)
+				b[3] = 0x20;
+			else
+				b[3] = 0x00;
+			b[3] |= len;
 			midi_use_bytes(s, port, len);
 		} else {
 			b[1] = 0;
@@ -309,11 +317,22 @@ static void read_midi_messages(struct amdtp_stream *s, __be32 *buffer,
 
 	for (f = 0; f < data_blocks; f++) {
 		b = (u8 *)&buffer[0];
-		port = b[3] >> 4;
-		len = b[3] & 0x0f;
 
-		if (port < p->midi_ports && p->midi[port] && len > 0)
-			snd_rawmidi_receive(p->midi[port], b + 1, len);
+		len = b[3] & 0x0f;
+		if (len > 0) {
+			/*
+			 * Upper 4 bits of LSB represent port number.
+			 * - 0000b: physical MIDI port 1. Use port 0.
+			 * - 1110b: console MIDI port. Use port 2.
+			 */
+			if (b[3] >> 4 > 0)
+				port = 2;
+			else
+				port = 0;
+
+			if (port < MAX_MIDI_PORTS && p->midi[port])
+				snd_rawmidi_receive(p->midi[port], b + 1, len);
+		}
 
 		buffer += s->data_block_quadlets;
 	}
@@ -364,7 +383,7 @@ void amdtp_dot_midi_trigger(struct amdtp_stream *s, unsigned int port,
 {
 	struct amdtp_dot *p = s->protocol;
 
-	if (port < p->midi_ports)
+	if (port < MAX_MIDI_PORTS)
 		ACCESS_ONCE(p->midi[port]) = midi;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 058/115] fm10k: correctly check if interface is removed

[Sasha Levin]

From: Phil Turnbull <phil.turnbull@oracle.com>

[ Upstream commit 540fca35e38d15777b310f450f63f056e63039f5 ]

FM10K_REMOVED expects a hardware address, not a 'struct fm10k_hw'.

Fixes: 5cb8db4a4cbc ("fm10k: Add support for VF")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c b/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c
index 2ce0eba5e040..38431b49020f 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c
@@ -983,7 +983,7 @@ static void fm10k_self_test(struct net_device *dev,
 
 	memset(data, 0, sizeof(*data) * FM10K_TEST_LEN);
 
-	if (FM10K_REMOVED(hw)) {
+	if (FM10K_REMOVED(hw->hw_addr)) {
 		netif_err(interface, drv, dev,
 			  "Interface removed - test blocked\n");
 		eth_test->flags |= ETH_TEST_FL_FAILED;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 060/115] apparmor: Make path_max parameter readonly

[Sasha Levin]

From: John Johansen <john.johansen@canonical.com>

[ Upstream commit 622f6e3265707ebf02ba776ac6e68003bcc31213 ]

The path_max parameter determines the max size of buffers allocated
but it should  not be setable at run time. If can be used to cause an
oops

root@ubuntu:~# echo 16777216 > /sys/module/apparmor/parameters/path_max
root@ubuntu:~# cat /sys/module/apparmor/parameters/path_max
Killed

[  122.141911] BUG: unable to handle kernel paging request at ffff880080945fff
[  122.143497] IP: [<ffffffff81228844>] d_absolute_path+0x44/0xa0
[  122.144742] PGD 220c067 PUD 0
[  122.145453] Oops: 0002 [#1] SMP
[  122.146204] Modules linked in: vmw_vsock_vmci_transport vsock ppdev vmw_balloon snd_ens1371 btusb snd_ac97_codec gameport snd_rawmidi btrtl snd_seq_device ac97_bus btbcm btintel snd_pcm input_leds bluetooth snd_timer snd joydev soundcore serio_raw coretemp shpchp nfit parport_pc i2c_piix4 8250_fintek vmw_vmci parport mac_hid ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd vmwgfx psmouse mptspi ttm mptscsih drm_kms_helper mptbase syscopyarea scsi_transport_spi sysfillrect
[  122.163365]  ahci sysimgblt e1000 fb_sys_fops libahci drm pata_acpi fjes
[  122.164747] CPU: 3 PID: 1501 Comm: bash Not tainted 4.4.0-59-generic #80-Ubuntu
[  122.166250] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[  122.168611] task: ffff88003496aa00 ti: ffff880076474000 task.ti: ffff880076474000
[  122.170018] RIP: 0010:[<ffffffff81228844>]  [<ffffffff81228844>] d_absolute_path+0x44/0xa0
[  122.171525] RSP: 0018:ffff880076477b90  EFLAGS: 00010206
[  122.172462] RAX: ffff880080945fff RBX: 0000000000000000 RCX: 0000000001000000
[  122.173709] RDX: 0000000000ffffff RSI: ffff880080946000 RDI: ffff8800348a1010
[  122.174978] RBP: ffff880076477bb8 R08: ffff880076477c80 R09: 0000000000000000
[  122.176227] R10: 00007ffffffff000 R11: ffff88007f946000 R12: ffff88007f946000
[  122.177496] R13: ffff880076477c80 R14: ffff8800348a1010 R15: ffff8800348a2400
[  122.178745] FS:  00007fd459eb4700(0000) GS:ffff88007b6c0000(0000) knlGS:0000000000000000
[  122.180176] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  122.181186] CR2: ffff880080945fff CR3: 0000000073422000 CR4: 00000000001406e0
[  122.182469] Stack:
[  122.182843]  00ffffff00000001 ffff880080946000 0000000000000000 0000000000000000
[  122.184409]  00000000570f789c ffff880076477c30 ffffffff81385671 ffff88007a2e7a58
[  122.185810]  0000000000000000 ffff880076477c88 01000000008a1000 0000000000000000
[  122.187231] Call Trace:
[  122.187680]  [<ffffffff81385671>] aa_path_name+0x81/0x370
[  122.188637]  [<ffffffff813875dd>] profile_transition+0xbd/0xb80
[  122.190181]  [<ffffffff811af9bc>] ? zone_statistics+0x7c/0xa0
[  122.191674]  [<ffffffff81389b20>] apparmor_bprm_set_creds+0x9b0/0xac0
[  122.193288]  [<ffffffff812e1971>] ? ext4_xattr_get+0x81/0x220
[  122.194793]  [<ffffffff812e800c>] ? ext4_xattr_security_get+0x1c/0x30
[  122.196392]  [<ffffffff813449b9>] ? get_vfs_caps_from_disk+0x69/0x110
[  122.198004]  [<ffffffff81232d4f>] ? mnt_may_suid+0x3f/0x50
[  122.199737]  [<ffffffff81344b03>] ? cap_bprm_set_creds+0xa3/0x600
[  122.201377]  [<ffffffff81346e53>] security_bprm_set_creds+0x33/0x50
[  122.203024]  [<ffffffff81214ce5>] prepare_binprm+0x85/0x190
[  122.204515]  [<ffffffff81216545>] do_execveat_common.isra.33+0x485/0x710
[  122.206200]  [<ffffffff81216a6a>] SyS_execve+0x3a/0x50
[  122.207615]  [<ffffffff81838795>] stub_execve+0x5/0x5
[  122.208978]  [<ffffffff818384f2>] ? entry_SYSCALL_64_fastpath+0x16/0x71
[  122.210615] Code: f8 31 c0 48 63 c2 83 ea 01 48 c7 45 e8 00 00 00 00 48 01 c6 85 d2 48 c7 45 f0 00 00 00 00 48 89 75 e0 89 55 dc 78 0c 48 8d 46 ff <c6> 46 ff 00 48 89 45 e0 48 8d 55 e0 48 8d 4d dc 48 8d 75 e8 e8
[  122.217320] RIP  [<ffffffff81228844>] d_absolute_path+0x44/0xa0
[  122.218860]  RSP <ffff880076477b90>
[  122.219919] CR2: ffff880080945fff
[  122.220936] ---[ end trace 506cdbd85eb6c55e ]---

Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 security/apparmor/lsm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index dec607c17b64..6dc4ce47580f 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -722,7 +722,7 @@ module_param_named(logsyscall, aa_g_logsyscall, aabool, S_IRUSR | S_IWUSR);
 
 /* Maximum pathname length before accesses will start getting rejected */
 unsigned int aa_g_path_max = 2 * PATH_MAX;
-module_param_named(path_max, aa_g_path_max, aauint, S_IRUSR | S_IWUSR);
+module_param_named(path_max, aa_g_path_max, aauint, S_IRUSR);
 
 /* Determines how paranoid loading of policy is and how much verification
  * on the loaded policy is done.
-- 
2.14.1

[PATCH AUTOSEL for 4.4 059/115] scsi: ses: don't get power status of SES device slot on probe

[Sasha Levin]

From: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>

[ Upstream commit 75106523f39751390b5789b36ee1d213b3af1945 ]

The commit 08024885a2a3 ("ses: Add power_status to SES device slot")
introduced the 'power_status' attribute to enclosure components and
the associated callbacks.

There are 2 callbacks available to get the power status of a device:
1) ses_get_power_status() for 'struct enclosure_component_callbacks'
2) get_component_power_status() for the sysfs device attribute
(these are available for kernel-space and user-space, respectively.)

However, despite both methods being available to get power status
on demand, that commit also introduced a call to get power status
in ses_enclosure_data_process().

This dramatically increased the total probe time for SCSI devices
on larger configurations, because ses_enclosure_data_process() is
called several times during the SCSI devices probe and loops over
the component devices (but that is another problem, another patch).

That results in a tremendous continuous hammering of SCSI Receive
Diagnostics commands to the enclosure-services device, which does
delay the total probe time for the SCSI devices __significantly__:

  Originally, ~34 minutes on a system attached to ~170 disks:

    [ 9214.490703] mpt3sas version 13.100.00.00 loaded
    ...
    [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0),
                   ordered(0), scsi_level(6), cmd_que(1)

  With this patch, it decreased to ~2.5 minutes -- a 13.6x faster

    [ 1002.992533] mpt3sas version 13.100.00.00 loaded
    ...
    [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0),
                   ordered(0), scsi_level(6), cmd_que(1)

Back to the commit discussion.. on the ses_get_power_status() call
introduced in ses_enclosure_data_process(): impact of removing it.

That may possibly be in place to initialize the power status value
on device probe.  However, those 2 functions available to retrieve
that value _do_ automatically refresh/update it.  So the potential
benefit would be a direct access of the 'power_status' field which
does not use the callbacks...

But the only reader of 'struct enclosure_component::power_status'
is the get_component_power_status() callback for sysfs attribute,
and it _does_ check for and call the .get_power_status callback,
(which indeed is defined and implemented by that commit), so the
power status value is, again, automatically updated.

So, the remaining potential for a direct/non-callback access to
the power_status attribute would be out-of-tree modules -- well,
for those, if they are for whatever reason interested in values
that are set during device probe and not up-to-date by the time
they need it.. well, that would be curious.

Well, to handle that more properly, set the initial power state
value to '-1' (i.e., uninitialized) instead of '1' (power 'on'),
and check for it in that callback which may do an direct access
to the field value _if_ a callback function is not defined.

Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Fixes: 08024885a2a3 ("ses: Add power_status to SES device slot")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/misc/enclosure.c | 7 ++++++-
 drivers/scsi/ses.c       | 1 -
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index cc91f7b3d90c..eb29113e0bac 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -148,7 +148,7 @@ enclosure_register(struct device *dev, const char *name, int components,
 	for (i = 0; i < components; i++) {
 		edev->component[i].number = -1;
 		edev->component[i].slot = -1;
-		edev->component[i].power_status = 1;
+		edev->component[i].power_status = -1;
 	}
 
 	mutex_lock(&container_list_lock);
@@ -600,6 +600,11 @@ static ssize_t get_component_power_status(struct device *cdev,
 
 	if (edev->cb->get_power_status)
 		edev->cb->get_power_status(edev, ecomp);
+
+	/* If still uninitialized, the callback failed or does not exist. */
+	if (ecomp->power_status == -1)
+		return (edev->cb->get_power_status) ? -EIO : -ENOTTY;
+
 	return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off");
 }
 
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 044d06410d4c..01168acc864d 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -546,7 +546,6 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
 					ecomp = &edev->component[components++];
 
 				if (!IS_ERR(ecomp)) {
-					ses_get_power_status(edev, ecomp);
 					if (addl_desc_ptr)
 						ses_process_descriptor(
 							ecomp,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 062/115] ARM: dts: rockchip: disable arm-global-timer for rk3188

[Sasha Levin]

From: Alexander Kochetkov <al.kochet@gmail.com>

[ Upstream commit 500d0aa918a2ea6bb918fee8adcf27dc2912bcd1 ]

The clocksource and the sched_clock provided by the arm_global_timer
are quite unstable because their rates depend on the cpu frequency.

On the other side, the arm_global_timer has a higher rating than the
rockchip_timer, it will be selected by default by the time framework
while we want to use the stable rockchip clocksource.

Let's disable the arm_global_timer in order to have the rockchip
clocksource selected by default.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/rk3188.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 6399942f1840..0e5142b6e914 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -513,6 +513,7 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 0xf04>;
+	status = "disabled";
 };
 
 &local_timer {
-- 
2.14.1

Re: [PATCH AUTOSEL for 4.4 062/115] ARM: dts: rockchip: disable arm-global-timer for rk3188

[Alexander Kochetkov]

Hello, Sasha!

Following 2 patches must be applied together with the patch:
5e0a39d0f727b35c8b7ef56ba0724c8ceb006297 clocksource/drivers/rockchip_timer: Implement clocksource timer
627988a66aee3c845aa2f1f874a3ddba8adb89d9 ARM: dts: rockchip: Add timer entries to rk3188 SoC

Alexander.

> 4 марта 2018 г., в 1:31, Sasha Levin <Alexander.Levin@microsoft.com> написал(а):
> 
> From: Alexander Kochetkov <al.kochet@gmail.com>
> 
> [ Upstream commit 500d0aa918a2ea6bb918fee8adcf27dc2912bcd1 ]
> 
> The clocksource and the sched_clock provided by the arm_global_timer
> are quite unstable because their rates depend on the cpu frequency.
> 
> On the other side, the arm_global_timer has a higher rating than the
> rockchip_timer, it will be selected by default by the time framework
> while we want to use the stable rockchip clocksource.
> 
> Let's disable the arm_global_timer in order to have the rockchip
> clocksource selected by default.
> 
> Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> ---
> arch/arm/boot/dts/rk3188.dtsi | 1 +
> 1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
> index 6399942f1840..0e5142b6e914 100644
> --- a/arch/arm/boot/dts/rk3188.dtsi
> +++ b/arch/arm/boot/dts/rk3188.dtsi
> @@ -513,6 +513,7 @@
> 
> &global_timer {
> 	interrupts = <GIC_PPI 11 0xf04>;
> +	status = "disabled";
> };
> 
> &local_timer {
> -- 
> 2.14.1

[PATCH AUTOSEL for 4.4 061/115] iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range

[Sasha Levin]

From: Nate Watterson <nwatters@codeaurora.org>

[ Upstream commit 5016bdb796b3726eec043ca0ce3be981f712c756 ]

Normally, calling alloc_iova() using an iova_domain with insufficient
pfns remaining between start_pfn and dma_limit will fail and return a
NULL pointer. Unexpectedly, if such a "full" iova_domain contains an
iova with pfn_lo == 0, the alloc_iova() call will instead succeed and
return an iova containing invalid pfns.

This is caused by an underflow bug in __alloc_and_insert_iova_range()
that occurs after walking the "full" iova tree when the search ends
at the iova with pfn_lo == 0 and limit_pfn is then adjusted to be just
below that (-1). This (now huge) limit_pfn gives the impression that a
vast amount of space is available between it and start_pfn and thus
a new iova is allocated with the invalid pfn_hi value, 0xFFF.... .

To rememdy this, a check is introduced to ensure that adjustments to
limit_pfn will not underflow.

This issue has been observed in the wild, and is easily reproduced with
the following sample code.

	struct iova_domain *iovad = kzalloc(sizeof(*iovad), GFP_KERNEL);
	struct iova *rsvd_iova, *good_iova, *bad_iova;
	unsigned long limit_pfn = 3;
	unsigned long start_pfn = 1;
	unsigned long va_size = 2;

	init_iova_domain(iovad, SZ_4K, start_pfn, limit_pfn);
	rsvd_iova = reserve_iova(iovad, 0, 0);
	good_iova = alloc_iova(iovad, va_size, limit_pfn, true);
	bad_iova = alloc_iova(iovad, va_size, limit_pfn, true);

Prior to the patch, this yielded:
	*rsvd_iova == {0, 0}   /* Expected */
	*good_iova == {2, 3}   /* Expected */
	*bad_iova  == {-2, -1} /* Oh no... */

After the patch, bad_iova is NULL as expected since inadequate
space remains between limit_pfn and start_pfn after allocating
good_iova.

Signed-off-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/iova.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index fa0adef32bd6..62739766b60b 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -126,7 +126,7 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
 				break;	/* found a free slot */
 		}
 adjust_limit_pfn:
-		limit_pfn = curr_iova->pfn_lo - 1;
+		limit_pfn = curr_iova->pfn_lo ? (curr_iova->pfn_lo - 1) : 0;
 move_left:
 		prev = curr;
 		curr = rb_prev(curr);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 063/115] video: ARM CLCD: fix dma allocation size

[Sasha Levin]

From: Liam Beguin <lbeguin@tycoint.com>

[ Upstream commit 9a1c779e6b06855e41099caa6f15b3b584dfa88c ]

This patch forces the frambuffer size to be aligned on kernel pages.

During the board startup, the splash screed did appear;
the "ts_test" program or our application were not able to start.

The following error message was reported:
error: failed to map framebuffer device to memory.
LinuxFB: driver cannot connect

The issue was discovered, on the LPC32xx platform, during the migration
of the LCD definition from the board file to the device tree.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/amba-clcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index 9362424c2340..924b3d6c3e9b 100644
--- a/drivers/video/fbdev/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -759,8 +759,8 @@ static int clcdfb_of_dma_setup(struct clcd_fb *fb)
 	if (err)
 		return err;
 
-	framesize = fb->panel->mode.xres * fb->panel->mode.yres *
-			fb->panel->bpp / 8;
+	framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres *
+			fb->panel->bpp / 8);
 	fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
 			&dma, GFP_KERNEL);
 	if (!fb->fb.screen_base)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 064/115] drm/radeon: Fail fb creation from imported dma-bufs.

[Sasha Levin]

From: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>

[ Upstream commit a294043b2fbd8de69d161457ed0c7a4026bbfa5a ]

Any use of the framebuffer will migrate it to VRAM, which is not sensible for
an imported dma-buf.

v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
CC: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/radeon/radeon_display.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 3645b223aa37..446d99062306 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -1374,6 +1374,12 @@ radeon_user_framebuffer_create(struct drm_device *dev,
 		return ERR_PTR(-ENOENT);
 	}
 
+	/* Handle is imported dma-buf, so cannot be migrated to VRAM for scanout */
+	if (obj->import_attach) {
+		DRM_DEBUG_KMS("Cannot create framebuffer from imported dma_buf\n");
+		return ERR_PTR(-EINVAL);
+	}
+
 	radeon_fb = kzalloc(sizeof(*radeon_fb), GFP_KERNEL);
 	if (radeon_fb == NULL) {
 		drm_gem_object_unreference_unlocked(obj);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 065/115] drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)

[Sasha Levin]

From: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>

[ Upstream commit 1769152ac64b0b07583f696b621624df2ca4c840 ]

Any use of the framebuffer will migrate it to VRAM, which is not sensible for
an imported dma-buf.

v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
CC: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index 82903ca78529..c555781685ea 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -560,6 +560,12 @@ amdgpu_user_framebuffer_create(struct drm_device *dev,
 		return ERR_PTR(-ENOENT);
 	}
 
+	/* Handle is imported dma-buf, so cannot be migrated to VRAM for scanout */
+	if (obj->import_attach) {
+		DRM_DEBUG_KMS("Cannot create framebuffer from imported dma_buf\n");
+		return ERR_PTR(-EINVAL);
+	}
+
 	amdgpu_fb = kzalloc(sizeof(*amdgpu_fb), GFP_KERNEL);
 	if (amdgpu_fb == NULL) {
 		drm_gem_object_unreference_unlocked(obj);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 066/115] coresight: Fixes coresight DT parse to get correct output port ID.

[Sasha Levin]

From: Mike Leach <mike.leach@linaro.org>

[ Upstream commit eeedc5421dd3b51de73e6106405c5c77f920f281 ]

Corrected to get the port numbering to allow programmable replicator driver
to operate correctly.

By convention, CoreSight devices number ports, not endpoints in
the .dts files:-

port {
     reg<N>
     endpoint {
     }
}

Existing code read endpoint number - always 0x0, rather than the correct
port number.

Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hwtracing/coresight/of_coresight.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/of_coresight.c b/drivers/hwtracing/coresight/of_coresight.c
index b0973617826f..7d2bb1549608 100644
--- a/drivers/hwtracing/coresight/of_coresight.c
+++ b/drivers/hwtracing/coresight/of_coresight.c
@@ -150,7 +150,7 @@ struct coresight_platform_data *of_get_coresight_platform_data(
 				continue;
 
 			/* The local out port number */
-			pdata->outports[i] = endpoint.id;
+			pdata->outports[i] = endpoint.port;
 
 			/*
 			 * Get a handle on the remote port and parent
-- 
2.14.1

[PATCH AUTOSEL for 4.4 067/115] MIPS: BPF: Quit clobbering callee saved registers in JIT code.

[Sasha Levin]

From: David Daney <david.daney@cavium.com>

[ Upstream commit 1ef0910cfd681f0bd0b81f8809935b2006e9cfb9 ]

If bpf_needs_clear_a() returns true, only actually clear it if it is
ever used.  If it is not used, we don't save and restore it, so the
clearing has the nasty side effect of clobbering caller state.

Also, don't emit stack pointer adjustment instructions if the
adjustment amount is zero.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15745/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/net/bpf_jit.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index 1a8c96035716..c0c1e9529dbd 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -527,7 +527,8 @@ static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
 	u32 sflags, tmp_flags;
 
 	/* Adjust the stack pointer */
-	emit_stack_offset(-align_sp(offset), ctx);
+	if (offset)
+		emit_stack_offset(-align_sp(offset), ctx);
 
 	tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
 	/* sflags is essentially a bitmap */
@@ -579,7 +580,8 @@ static void restore_bpf_jit_regs(struct jit_ctx *ctx,
 		emit_load_stack_reg(r_ra, r_sp, real_off, ctx);
 
 	/* Restore the sp and discard the scrach memory */
-	emit_stack_offset(align_sp(offset), ctx);
+	if (offset)
+		emit_stack_offset(align_sp(offset), ctx);
 }
 
 static unsigned int get_stack_depth(struct jit_ctx *ctx)
@@ -626,8 +628,14 @@ static void build_prologue(struct jit_ctx *ctx)
 	if (ctx->flags & SEEN_X)
 		emit_jit_reg_move(r_X, r_zero, ctx);
 
-	/* Do not leak kernel data to userspace */
-	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
+	/*
+	 * Do not leak kernel data to userspace, we only need to clear
+	 * r_A if it is ever used.  In fact if it is never used, we
+	 * will not save/restore it, so clearing it in this case would
+	 * corrupt the state of the caller.
+	 */
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]) &&
+	    (ctx->flags & SEEN_A))
 		emit_jit_reg_move(r_A, r_zero, ctx);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 068/115] MIPS: BPF: Fix multiple problems in JIT skb access helpers.

[Sasha Levin]

From: David Daney <david.daney@cavium.com>

[ Upstream commit a81507c79f4ae9a0f9fb1054b59b62a090620dd9 ]

o Socket data is unsigned, so use unsigned accessors instructions.

 o Fix path result pointer generation arithmetic.

 o Fix half-word byte swapping code for unsigned semantics.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/net/bpf_jit_asm.S | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S
index 5d2e0c8d29c0..88a2075305d1 100644
--- a/arch/mips/net/bpf_jit_asm.S
+++ b/arch/mips/net/bpf_jit_asm.S
@@ -90,18 +90,14 @@ FEXPORT(sk_load_half_positive)
 	is_offset_in_header(2, half)
 	/* Offset within header boundaries */
 	PTR_ADDU t1, $r_skb_data, offset
-	.set	reorder
-	lh	$r_A, 0(t1)
-	.set	noreorder
+	lhu	$r_A, 0(t1)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 # if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
-	wsbh	t0, $r_A
-	seh	$r_A, t0
+	wsbh	$r_A, $r_A
 # else
-	sll	t0, $r_A, 24
-	andi	t1, $r_A, 0xff00
-	sra	t0, t0, 16
-	srl	t1, t1, 8
+	sll	t0, $r_A, 8
+	srl	t1, $r_A, 8
+	andi	t0, t0, 0xff00
 	or	$r_A, t0, t1
 # endif
 #endif
@@ -115,7 +111,7 @@ FEXPORT(sk_load_byte_positive)
 	is_offset_in_header(1, byte)
 	/* Offset within header boundaries */
 	PTR_ADDU t1, $r_skb_data, offset
-	lb	$r_A, 0(t1)
+	lbu	$r_A, 0(t1)
 	jr	$r_ra
 	 move	$r_ret, zero
 	END(sk_load_byte)
@@ -139,6 +135,11 @@ FEXPORT(sk_load_byte_positive)
  * (void *to) is returned in r_s0
  *
  */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define DS_OFFSET(SIZE) (4 * SZREG)
+#else
+#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
+#endif
 #define bpf_slow_path_common(SIZE)				\
 	/* Quick check. Are we within reasonable boundaries? */ \
 	LONG_ADDIU	$r_s1, $r_skb_len, -SIZE;		\
@@ -150,7 +151,7 @@ FEXPORT(sk_load_byte_positive)
 	PTR_LA		t0, skb_copy_bits;			\
 	PTR_S		$r_ra, (5 * SZREG)($r_sp);		\
 	/* Assign low slot to a2 */				\
-	move		a2, $r_sp;				\
+	PTR_ADDIU	a2, $r_sp, DS_OFFSET(SIZE);		\
 	jalr		t0;					\
 	/* Reset our destination slot (DS but it's ok) */	\
 	 INT_S		zero, (4 * SZREG)($r_sp);		\
-- 
2.14.1

[PATCH AUTOSEL for 4.4 069/115] MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification

[Sasha Levin]

From: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>

[ Upstream commit 5bba7aa4958e271c3ffceb70d47d3206524cf489 ]

Fix the problem of inaccurate identification of instructions BLEZL and
BGTZL in R2 emulation code by making sure all necessary encoding
specifications are met.

Previously, certain R6 instructions could be identified as BLEZL or
BGTZL. R2 emulation routine didn't take into account that both BLEZL
and BGTZL instructions require their rt field (bits 20 to 16 of
instruction encoding) to be 0, and that, at same time, if the value in
that field is not 0, the encoding may represent a legitimate MIPS R6
instruction.

This means that a problem could occur after emulation optimization,
when emulation routine tried to pipeline emulation, picked up a next
candidate, and subsequently misrecognized an R6 instruction as BLEZL
or BGTZL.

It should be said that for single pass strategy, the problem does not
happen because CPU doesn't trap on branch-compacts which share opcode
space with BLEZL/BGTZL (but have rt field != 0, of course).

Signed-off-by: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtech.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtech.com>
Reported-by: Douglas Leung <douglas.leung@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/kernel/mips-r2-to-r6-emul.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index e3384065f5e7..81cd389e855c 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -1097,10 +1097,20 @@ repeat:
 		}
 		break;
 
-	case beql_op:
-	case bnel_op:
 	case blezl_op:
 	case bgtzl_op:
+		/*
+		 * For BLEZL and BGTZL, rt field must be set to 0. If this
+		 * is not the case, this may be an encoding of a MIPS R6
+		 * instruction, so return to CPU execution if this occurs
+		 */
+		if (MIPSInst_RT(inst)) {
+			err = SIGILL;
+			break;
+		}
+		/* fall through */
+	case beql_op:
+	case bnel_op:
 		if (delay_slot(regs)) {
 			err = SIGILL;
 			break;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 070/115] MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters

[Sasha Levin]

From: Aleksandar Markovic <aleksandar.markovic@imgtec.com>

[ Upstream commit 411dac79cc2ed80f7e348ccc23eb4d8b0ba9f6d5 ]

Add missing clearing of BLTZALL and BGEZALL emulation counters in
function mipsr2_stats_clear_show().

Previously, it was not possible to reset BLTZALL and BGEZALL
emulation counters - their value remained the same even after
explicit request via debugfs. As far as other related counters
are concerned, they all seem to be properly cleared.

This change affects debugfs operation only, core R2 emulation
functionality is not affected.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: leonid.yegoshin@imgtec.com
Cc: douglas.leung@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: miodrag.dinic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15517/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/kernel/mips-r2-to-r6-emul.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index 81cd389e855c..cbe0f025856d 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -2340,6 +2340,8 @@ static int mipsr2_stats_clear_show(struct seq_file *s, void *unused)
 	__this_cpu_write((mipsr2bremustats).bgezl, 0);
 	__this_cpu_write((mipsr2bremustats).bltzll, 0);
 	__this_cpu_write((mipsr2bremustats).bgezll, 0);
+	__this_cpu_write((mipsr2bremustats).bltzall, 0);
+	__this_cpu_write((mipsr2bremustats).bgezall, 0);
 	__this_cpu_write((mipsr2bremustats).bltzal, 0);
 	__this_cpu_write((mipsr2bremustats).bgezal, 0);
 	__this_cpu_write((mipsr2bremustats).beql, 0);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 071/115] regulator: isl9305: fix array size

[Sasha Levin]

From: Vincent Stehlé <vincent.stehle@laposte.net>

[ Upstream commit 0c08aaf873174c95e674cf21ffcd041c589d2e5b ]

ISL9305_MAX_REGULATOR is the last index used to access the init_data[]
array, so we need to add one to this last index to obtain the necessary
array size.

This fixes the following smatch error:

  drivers/regulator/isl9305.c:160 isl9305_i2c_probe() error: buffer overflow 'pdata->init_data' 3 <= 3

Fixes: dec38b5ce6a9edb4 ("regulator: isl9305: Add Intersil ISL9305/H driver")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/platform_data/isl9305.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/platform_data/isl9305.h b/include/linux/platform_data/isl9305.h
index 1419133fa69e..4ac1a070af0a 100644
--- a/include/linux/platform_data/isl9305.h
+++ b/include/linux/platform_data/isl9305.h
@@ -24,7 +24,7 @@
 struct regulator_init_data;
 
 struct isl9305_pdata {
-	struct regulator_init_data *init_data[ISL9305_MAX_REGULATOR];
+	struct regulator_init_data *init_data[ISL9305_MAX_REGULATOR + 1];
 };
 
 #endif
-- 
2.14.1

[PATCH AUTOSEL for 4.4 072/115] md/raid6: Fix anomily when recovering a single device in RAID6.

[Sasha Levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit 7471fb77ce4dc4cb81291189947fcdf621a97987 ]

When recoverying a single missing/failed device in a RAID6,
those stripes where the Q block is on the missing device are
handled a bit differently.  In these cases it is easy to
check that the P block is correct, so we do.  This results
in the P block be destroy.  Consequently the P block needs
to be read a second time in order to compute Q.  This causes
lots of seeks and hurts performance.

It shouldn't be necessary to re-read P as it can be computed
from the DATA.  But we only compute blocks on missing
devices, since c337869d9501 ("md: do not compute parity
unless it is on a failed drive").

So relax the change made in that commit to allow computing
of the P block in a RAID6 which it is the only missing that
block.

This makes RAID6 recovery run much faster as the disk just
"before" the recovering device is no longer seeking
back-and-forth.

Reported-by-tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/raid5.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 86ab6d14d782..ca968c3f25c7 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3372,9 +3372,20 @@ static int fetch_block(struct stripe_head *sh, struct stripe_head_state *s,
 		BUG_ON(test_bit(R5_Wantcompute, &dev->flags));
 		BUG_ON(test_bit(R5_Wantread, &dev->flags));
 		BUG_ON(sh->batch_head);
+
+		/*
+		 * In the raid6 case if the only non-uptodate disk is P
+		 * then we already trusted P to compute the other failed
+		 * drives. It is safe to compute rather than re-read P.
+		 * In other cases we only compute blocks from failed
+		 * devices, otherwise check/repair might fail to detect
+		 * a real inconsistency.
+		 */
+
 		if ((s->uptodate == disks - 1) &&
+		    ((sh->qd_idx >= 0 && sh->pd_idx == disk_idx) ||
 		    (s->failed && (disk_idx == s->failed_num[0] ||
-				   disk_idx == s->failed_num[1]))) {
+				   disk_idx == s->failed_num[1])))) {
 			/* have disk failed, and we're requested to fetch it;
 			 * do compute it
 			 */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 074/115] usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()

[Sasha Levin]

From: Yuyang Du <yuyang.du@intel.com>

[ Upstream commit 9f20dfb44d03745d0d3cef2ffb3abf8d8024fa61 ]

This fixes the commit: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add
SuperSpeed support").

In the case of ClearPortFeature and USB_PORT_FEAT_POWER, simply clear
the right bit regardless of what the wValue is.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/gadget/udc/dummy_hcd.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 8080a11947b7..eb876ed96861 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -2105,16 +2105,13 @@ static int dummy_hub_control(
 			}
 			break;
 		case USB_PORT_FEAT_POWER:
-			if (hcd->speed == HCD_USB3) {
-				if (dum_hcd->port_status & USB_PORT_STAT_POWER)
-					dev_dbg(dummy_dev(dum_hcd),
-						"power-off\n");
-			} else
-				if (dum_hcd->port_status &
-							USB_SS_PORT_STAT_POWER)
-					dev_dbg(dummy_dev(dum_hcd),
-						"power-off\n");
-			/* FALLS THROUGH */
+			dev_dbg(dummy_dev(dum_hcd), "power-off\n");
+			if (hcd->speed == HCD_USB3)
+				dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER;
+			else
+				dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
+			set_link_state(dum_hcd);
+			break;
 		default:
 			dum_hcd->port_status &= ~(1 << wValue);
 			set_link_state(dum_hcd);
@@ -2285,14 +2282,13 @@ static int dummy_hub_control(
 				if ((dum_hcd->port_status &
 				     USB_SS_PORT_STAT_POWER) != 0) {
 					dum_hcd->port_status |= (1 << wValue);
-					set_link_state(dum_hcd);
 				}
 			} else
 				if ((dum_hcd->port_status &
 				     USB_PORT_STAT_POWER) != 0) {
 					dum_hcd->port_status |= (1 << wValue);
-					set_link_state(dum_hcd);
 				}
+			set_link_state(dum_hcd);
 		}
 		break;
 	case GetPortErrorCount:
-- 
2.14.1

[PATCH AUTOSEL for 4.4 073/115] usb: dwc2: Make sure we disconnect the gadget state

[Sasha Levin]

From: John Stultz <john.stultz@linaro.org>

[ Upstream commit dad3f793f20fbb5c0c342f0f5a0bdf69a4d76089 ]

I had seen some odd behavior with HiKey's usb-gadget interface
that I finally seemed to have chased down. Basically every other
time I plugged in the OTG port, the gadget interface would
properly initialize. The other times, I'd get a big WARN_ON
in dwc2_hsotg_init_fifo() about the fifo_map not being clear.

Ends up if we don't disconnect the gadget state, the fifo-map
doesn't get cleared properly, which causes WARN_ON messages and
also results in the device not properly being setup as a gadget
every other time the OTG port is connected.

So this patch adds a call to dwc2_hsotg_disconnect() in the
reset path so the state is properly cleared.

With it, the gadget interface initializes properly on every
plug in.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/dwc2/hcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 571c21727ff9..88bd950665fa 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1385,6 +1385,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 		dwc2_core_init(hsotg, false, -1);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 075/115] drivers/perf: arm_pmu: handle no platform_device

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 7654137071fa706e5c91f4f27bc2a5cd7e435a9b ]

In armpmu_dispatch_irq() we look at arm_pmu::plat_device to acquire
platdata, so that we can defer to platform-specific IRQ handling,
required on some 32-bit parts. With the advent of ACPI we won't always
have a platform_device, and so we must avoid trying to dereference
fields from it.

This patch fixes up armpmu_dispatch_irq() to avoid doing so, introducing
a new armpmu_get_platdata() helper.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/perf/arm_pmu.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 8af1f900ea65..1ba58fb6f796 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -321,10 +321,16 @@ validate_group(struct perf_event *event)
 	return 0;
 }
 
+static struct arm_pmu_platdata *armpmu_get_platdata(struct arm_pmu *armpmu)
+{
+	struct platform_device *pdev = armpmu->plat_device;
+
+	return pdev ? dev_get_platdata(&pdev->dev) : NULL;
+}
+
 static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 {
 	struct arm_pmu *armpmu;
-	struct platform_device *plat_device;
 	struct arm_pmu_platdata *plat;
 	int ret;
 	u64 start_clock, finish_clock;
@@ -336,8 +342,8 @@ static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 	 * dereference.
 	 */
 	armpmu = *(void **)dev;
-	plat_device = armpmu->plat_device;
-	plat = dev_get_platdata(&plat_device->dev);
+
+	plat = armpmu_get_platdata(armpmu);
 
 	start_clock = sched_clock();
 	if (plat && plat->handle_irq)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 077/115] perf session: Don't rely on evlist in pipe mode

[Sasha Levin]

From: David Carrillo-Cisneros <davidcc@google.com>

[ Upstream commit 0973ad97c187e06aece61f685b9c3b2d93290a73 ]

Session sets a number parameters that rely on evlist. These parameters
are not used in pipe-mode and should not be set, since evlist is
unavailable. Fix that.

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-6-davidcc@google.com
[ Check if file != NULL in perf_session__new(), like when used by builtin-top.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/session.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index fe1c837459f4..0ae4f73dc8eb 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -135,8 +135,14 @@ struct perf_session *perf_session__new(struct perf_data_file *file,
 			if (perf_session__open(session) < 0)
 				goto out_close;
 
-			perf_session__set_id_hdr_size(session);
-			perf_session__set_comm_exec(session);
+			/*
+			 * set session attributes that are present in perf.data
+			 * but not in pipe-mode.
+			 */
+			if (!file->is_pipe) {
+				perf_session__set_id_hdr_size(session);
+				perf_session__set_comm_exec(session);
+			}
 		}
 	} else  {
 		session->machines.host.env = &perf_env;
@@ -151,7 +157,11 @@ struct perf_session *perf_session__new(struct perf_data_file *file,
 			pr_warning("Cannot read kernel map\n");
 	}
 
-	if (tool && tool->ordering_requires_timestamps &&
+	/*
+	 * In pipe-mode, evlist is empty until PERF_RECORD_HEADER_ATTR is
+	 * processed, so perf_evlist__sample_id_all is not meaningful here.
+	 */
+	if ((!file || !file->is_pipe) && tool && tool->ordering_requires_timestamps &&
 	    tool->ordered_events && !perf_evlist__sample_id_all(session->evlist)) {
 		dump_printf("WARNING: No sample_id_all support, falling back to unordered processing\n");
 		tool->ordered_events = false;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 076/115] perf inject: Copy events when reordering events in pipe mode

[Sasha Levin]

From: David Carrillo-Cisneros <davidcc@google.com>

[ Upstream commit 1e0d4f0200e4dbdfc38d818f329d8a0955f7c6f5 ]

__perf_session__process_pipe_events reuses the same memory buffer to
process all events in the pipe.

When reordering is needed (e.g. -b option), events are not immediately
flushed, but kept around until reordering is possible, causing
memory corruption.

The problem is usually observed by a "Unknown sample error" output. It
can easily be reproduced by:

  perf record -o - noploop | perf inject -b > output

Committer testing:

Before:

  $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null
  stress: info: [8297] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [8297] successful run completed in 2s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  Warning:
  Found 1 unknown events!

  Is this an older tool processing a perf.data file generated by a more recent tool?

  If that is not the case, consider reporting to linux-kernel@vger.kernel.org.

  $

After:

  $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null
  stress: info: [9027] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [9027] successful run completed in 2s
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  no symbols found in /usr/bin/stress, maybe install a debug package?
  no symbols found in /usr/bin/stress, maybe install a debug package?
  $

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/ordered-events.c | 3 ++-
 tools/perf/util/session.c        | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/ordered-events.c b/tools/perf/util/ordered-events.c
index b1b9e2385f4b..5e58149c4df2 100644
--- a/tools/perf/util/ordered-events.c
+++ b/tools/perf/util/ordered-events.c
@@ -79,7 +79,7 @@ static union perf_event *dup_event(struct ordered_events *oe,
 
 static void free_dup_event(struct ordered_events *oe, union perf_event *event)
 {
-	if (oe->copy_on_queue) {
+	if (event && oe->copy_on_queue) {
 		oe->cur_alloc_size -= event->header.size;
 		free(event);
 	}
@@ -150,6 +150,7 @@ void ordered_events__delete(struct ordered_events *oe, struct ordered_event *eve
 	list_move(&event->list, &oe->cache);
 	oe->nr_events--;
 	free_dup_event(oe, event->event);
+	event->event = NULL;
 }
 
 int ordered_events__queue(struct ordered_events *oe, union perf_event *event,
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 468de95bc8bb..fe1c837459f4 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -1437,6 +1437,7 @@ static int __perf_session__process_pipe_events(struct perf_session *session)
 	buf = malloc(cur_size);
 	if (!buf)
 		return -errno;
+	ordered_events__set_copy_on_queue(oe, true);
 more:
 	event = buf;
 	err = readn(fd, event, sizeof(struct perf_event_header));
-- 
2.14.1

[PATCH AUTOSEL for 4.4 078/115] scsi: sg: check for valid direction before starting the request

[Sasha Levin]

From: Johannes Thumshirn <jthumshirn@suse.de>

[ Upstream commit 28676d869bbb5257b5f14c0c95ad3af3a7019dd5 ]

Check for a valid direction before starting the request, otherwise we
risk running into an assertion in the scsi midlayer checking for valid
requests.

[mkp: fixed typo]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Link: http://www.spinics.net/lists/linux-scsi/msg104400.html
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/sg.c | 46 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 0f0ff75755e0..27f92f4ea6bc 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -674,18 +674,14 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
 	 * is a non-zero input_size, so emit a warning.
 	 */
 	if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) {
-		static char cmd[TASK_COMM_LEN];
-		if (strcmp(current->comm, cmd)) {
-			printk_ratelimited(KERN_WARNING
-					   "sg_write: data in/out %d/%d bytes "
-					   "for SCSI command 0x%x-- guessing "
-					   "data in;\n   program %s not setting "
-					   "count and/or reply_len properly\n",
-					   old_hdr.reply_len - (int)SZ_SG_HEADER,
-					   input_size, (unsigned int) cmnd[0],
-					   current->comm);
-			strcpy(cmd, current->comm);
-		}
+		printk_ratelimited(KERN_WARNING
+				   "sg_write: data in/out %d/%d bytes "
+				   "for SCSI command 0x%x-- guessing "
+				   "data in;\n   program %s not setting "
+				   "count and/or reply_len properly\n",
+				   old_hdr.reply_len - (int)SZ_SG_HEADER,
+				   input_size, (unsigned int) cmnd[0],
+				   current->comm);
 	}
 	k = sg_common_write(sfp, srp, cmnd, sfp->timeout, blocking);
 	return (k < 0) ? k : count;
@@ -764,6 +760,29 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 	return count;
 }
 
+static bool sg_is_valid_dxfer(sg_io_hdr_t *hp)
+{
+	switch (hp->dxfer_direction) {
+	case SG_DXFER_NONE:
+		if (hp->dxferp || hp->dxfer_len > 0)
+			return false;
+		return true;
+	case SG_DXFER_TO_DEV:
+	case SG_DXFER_FROM_DEV:
+	case SG_DXFER_TO_FROM_DEV:
+		if (!hp->dxferp || hp->dxfer_len == 0)
+			return false;
+		return true;
+	case SG_DXFER_UNKNOWN:
+		if ((!hp->dxferp && hp->dxfer_len) ||
+		    (hp->dxferp && hp->dxfer_len == 0))
+			return false;
+		return true;
+	default:
+		return false;
+	}
+}
+
 static int
 sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		unsigned char *cmnd, int timeout, int blocking)
@@ -784,6 +803,9 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 			"sg_common_write:  scsi opcode=0x%02x, cmd_size=%d\n",
 			(int) cmnd[0], (int) hp->cmd_len));
 
+	if (!sg_is_valid_dxfer(hp))
+		return -EINVAL;
+
 	k = sg_start_req(srp, cmnd);
 	if (k) {
 		SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 079/115] scsi: sg: close race condition in sg_remove_sfp_usercontext()

[Sasha Levin]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 97d27b0dd015e980ade63fda111fd1353276e28b ]

sg_remove_sfp_usercontext() is clearing any sg requests, but needs to
take 'rq_list_lock' when modifying the list.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/sg.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 27f92f4ea6bc..dedaf3e89bb5 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -535,6 +535,7 @@ sg_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
 	} else
 		count = (old_hdr->result == 0) ? 0 : -EIO;
 	sg_finish_rem_req(srp);
+	sg_remove_request(sfp, srp);
 	retval = count;
 free_old_hdr:
 	kfree(old_hdr);
@@ -575,6 +576,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
 	}
 err_out:
 	err2 = sg_finish_rem_req(srp);
+	sg_remove_request(sfp, srp);
 	return err ? : err2 ? : count;
 }
 
@@ -811,6 +813,7 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp,
 			"sg_common_write: start_req err=%d\n", k));
 		sg_finish_rem_req(srp);
+		sg_remove_request(sfp, srp);
 		return k;	/* probably out of space --> ENOMEM */
 	}
 	if (atomic_read(&sdp->detaching)) {
@@ -823,6 +826,7 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		}
 
 		sg_finish_rem_req(srp);
+		sg_remove_request(sfp, srp);
 		return -ENODEV;
 	}
 
@@ -1312,6 +1316,7 @@ sg_rq_end_io_usercontext(struct work_struct *work)
 	struct sg_fd *sfp = srp->parentfp;
 
 	sg_finish_rem_req(srp);
+	sg_remove_request(sfp, srp);
 	kref_put(&sfp->f_ref, sg_remove_sfp);
 }
 
@@ -1856,8 +1861,6 @@ sg_finish_rem_req(Sg_request *srp)
 	else
 		sg_remove_scat(sfp, req_schp);
 
-	sg_remove_request(sfp, srp);
-
 	return ret;
 }
 
@@ -2204,12 +2207,17 @@ sg_remove_sfp_usercontext(struct work_struct *work)
 	struct sg_fd *sfp = container_of(work, struct sg_fd, ew.work);
 	struct sg_device *sdp = sfp->parentdp;
 	Sg_request *srp;
+	unsigned long iflags;
 
 	/* Cleanup any responses which were never read(). */
+	write_lock_irqsave(&sfp->rq_list_lock, iflags);
 	while (!list_empty(&sfp->rq_list)) {
 		srp = list_first_entry(&sfp->rq_list, Sg_request, entry);
 		sg_finish_rem_req(srp);
+		list_del(&srp->entry);
+		srp->parentfp = NULL;
 	}
+	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
 
 	if (sfp->reserve.bufflen > 0) {
 		SCSI_LOG_TIMEOUT(6, sg_printk(KERN_INFO, sdp,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 080/115] kprobes/x86: Fix kprobe-booster not to boost far call instructions

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit bd0b90676c30fe640e7ead919b3e38846ac88ab7 ]

Fix the kprobe-booster not to boost far call instruction,
because a call may store the address in the single-step
execution buffer to the stack, which should be modified
after single stepping.

Currently, this instruction will be filtered as not
boostable in resume_execution(), so this is not a
critical issue.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076340615.22469.14066273186134229909.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/kprobes/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 99d293ea2b49..5d11d01f75de 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -196,6 +196,8 @@ retry:
 		return (opcode != 0x62 && opcode != 0x67);
 	case 0x70:
 		return 0; /* can't boost conditional jump */
+	case 0x90:
+		return opcode != 0x9a;	/* can't boost call far */
 	case 0xc0:
 		/* can't boost software-interruptions */
 		return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 082/115] pwm: tegra: Increase precision in PWM rate calculation

[Sasha Levin]

From: Laxman Dewangan <ldewangan@nvidia.com>

[ Upstream commit 250b76f43f57d578ebff5e7211eb2c73aa5cd6ca ]

The rate of the PWM calculated as follows:

	hz = NSEC_PER_SEC / period_ns;
 	rate = (rate + (hz / 2)) / hz;

This has the precision loss in lower PWM rate.

Change this to have more precision as:

	hz = DIV_ROUND_CLOSEST_ULL(NSEC_PER_SEC * 100, period_ns);
	rate = DIV_ROUND_CLOSEST(rate * 100, hz)

Example:

1. period_ns = 16672000, PWM clock rate is 200 KHz.

	Based on old formula
		hz = NSEC_PER_SEC / period_ns
		   = 1000000000ul/16672000
		   = 59 (59.98)
		rate = (200K + 59/2)/59 = 3390

	Based on new method:
		hz = 5998
		rate = DIV_ROUND_CLOSE(200000*100, 5998) = 3334

	If we measure the PWM signal rate, we will get more accurate
	period with rate value of 3334 instead of 3390.

2.  period_ns = 16803898, PWM clock rate is 200 KHz.

	Based on old formula:
		hz = 59, rate = 3390

	Based on new formula:
		hz = 5951, rate = 3360

	The PWM signal rate of 3360 is more near to requested period
	than 3333.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pwm/pwm-tegra.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index d4de0607b502..3039fb762893 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -69,6 +69,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
 	unsigned long long c;
 	unsigned long rate, hz;
+	unsigned long long ns100 = NSEC_PER_SEC;
 	u32 val = 0;
 	int err;
 
@@ -87,9 +88,11 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * cycles at the PWM clock rate will take period_ns nanoseconds.
 	 */
 	rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH;
-	hz = NSEC_PER_SEC / period_ns;
 
-	rate = (rate + (hz / 2)) / hz;
+	/* Consider precision in PWM_SCALE_WIDTH rate calculation */
+	ns100 *= 100;
+	hz = DIV_ROUND_CLOSEST_ULL(ns100, period_ns);
+	rate = DIV_ROUND_CLOSEST(rate * 100, hz);
 
 	/*
 	 * Since the actual PWM divider is the register's frequency divider
-- 
2.14.1

[PATCH AUTOSEL for 4.4 081/115] kprobes/x86: Set kprobes pages read-only

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit d0381c81c2f782fa2131178d11e0cfb23d50d631 ]

Set the pages which is used for kprobes' singlestep buffer
and optprobe's trampoline instruction buffer to readonly.
This can prevent unexpected (or unintended) instruction
modification.

This also passes rodata_test as below.

Without this patch, rodata_test shows a warning:

  WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:235 note_page+0x7a9/0xa20
  x86/mm: Found insecure W+X mapping at address ffffffffa0000000/0xffffffffa0000000

With this fix, no W+X pages are found:

  x86/mm: Checked W+X mappings: passed, no W+X pages found.
  rodata_test: all tests were successful

Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076375592.22469.14174394514338612247.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/kprobes/core.c | 4 ++++
 arch/x86/kernel/kprobes/opt.c  | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 5d11d01f75de..565e24e9ddf2 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -406,6 +406,8 @@ static int arch_copy_kprobe(struct kprobe *p)
 {
 	int ret;
 
+	set_memory_rw((unsigned long)p->ainsn.insn & PAGE_MASK, 1);
+
 	/* Copy an instruction with recovering if other optprobe modifies it.*/
 	ret = __copy_instruction(p->ainsn.insn, p->addr);
 	if (!ret)
@@ -420,6 +422,8 @@ static int arch_copy_kprobe(struct kprobe *p)
 	else
 		p->ainsn.boostable = -1;
 
+	set_memory_ro((unsigned long)p->ainsn.insn & PAGE_MASK, 1);
+
 	/* Check whether the instruction modifies Interrupt Flag or not */
 	p->ainsn.if_modifier = is_IF_modifier(p->ainsn.insn);
 
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index ea8e2b846101..7aba9d6475a5 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -370,6 +370,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op,
 	}
 
 	buf = (u8 *)op->optinsn.insn;
+	set_memory_rw((unsigned long)buf & PAGE_MASK, 1);
 
 	/* Copy instructions into the out-of-line buffer */
 	ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr);
@@ -392,6 +393,8 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op,
 	synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size,
 			   (u8 *)op->kp.addr + op->optinsn.size);
 
+	set_memory_ro((unsigned long)buf & PAGE_MASK, 1);
+
 	flush_icache_range((unsigned long) buf,
 			   (unsigned long) buf + TMPL_END_IDX +
 			   op->optinsn.size + RELATIVEJUMP_SIZE);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 083/115] wil6210: fix memory access violation in wil_memcpy_from/toio_32

[Sasha Levin]

From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>

[ Upstream commit 0f6edfe2bbbb59d161580cb4870fcc46f5490f85 ]

In case count is not multiple of 4, there is a read access in
wil_memcpy_toio_32() from outside src buffer boundary.
In wil_memcpy_fromio_32(), in case count is not multiple of 4, there is
a write access to outside dst io memory boundary.

Fix these issues with proper handling of the last 1 to 4 copied bytes.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 85bca557a339..f09fafaaaf1a 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -125,9 +125,15 @@ void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
 	u32 *d = dst;
 	const volatile u32 __iomem *s = src;
 
-	/* size_t is unsigned, if (count%4 != 0) it will wrap */
-	for (count += 4; count > 4; count -= 4)
+	for (; count >= 4; count -= 4)
 		*d++ = __raw_readl(s++);
+
+	if (unlikely(count)) {
+		/* count can be 1..3 */
+		u32 tmp = __raw_readl(s);
+
+		memcpy(d, &tmp, count);
+	}
 }
 
 void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
@@ -136,8 +142,16 @@ void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
 	volatile u32 __iomem *d = dst;
 	const u32 *s = src;
 
-	for (count += 4; count > 4; count -= 4)
+	for (; count >= 4; count -= 4)
 		__raw_writel(*s++, d++);
+
+	if (unlikely(count)) {
+		/* count can be 1..3 */
+		u32 tmp = 0;
+
+		memcpy(&tmp, s, count);
+		__raw_writel(tmp, d);
+	}
 }
 
 static void wil_disconnect_cid(struct wil6210_priv *wil, int cid,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 084/115] drm/edid: set ELD connector type in drm_edid_to_eld()

[Sasha Levin]

From: Jani Nikula <jani.nikula@intel.com>

[ Upstream commit 1d1c36650752b7fb81cee515a9bba4131cac4b7c ]

Since drm_edid_to_eld() knows the connector type, we can set the type in
ELD while at it. Most connectors this gets called on are not DP
encoders, and with the HDMI type being 0, this does not change behaviour
for non-DP.

For i915 having this in place earlier would have saved a considerable
amount of debugging that lead to the fix 2d8f63297b9f ("drm/i915: always
update ELD connector type after get modes"). I don't see other drivers,
even the ones calling drm_edid_to_eld() on DP connectors, setting the
connector type in ELD.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/drm_edid.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c641ed9470e1..724f7cf52253 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3219,8 +3219,7 @@ monitor_name(struct detailed_timing *t, void *data)
  * @edid: EDID to parse
  *
  * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The
- * Conn_Type, HDCP and Port_ID ELD fields are left for the graphics driver to
- * fill in.
+ * HDCP and Port_ID ELD fields are left for the graphics driver to fill in.
  */
 void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 {
@@ -3293,6 +3292,12 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 	}
 	eld[5] |= sad_count << 4;
 
+	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+		eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_DP;
+	else
+		eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_HDMI;
+
 	eld[DRM_ELD_BASELINE_ELD_LEN] =
 		DIV_ROUND_UP(drm_eld_calc_baseline_block_size(eld), 4);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 085/115] video/hdmi: Allow "empty" HDMI infoframes

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 593f4b19a094c4426bd1e1e3cbab87a48bd13c71 ]

HDMI 2.0 Appendix F suggest that we should keep sending the infoframe
when switching from 3D to 2D mode, even if the infoframe isn't strictly
necessary (ie. not needed to transmit the VIC or stereo information).
This is a workaround against some sinks that fail to realize that they
should switch from 3D to 2D mode when the source stop transmitting
the infoframe.

v2: Handle unpack() as well
    Pull the length calculation into a helper

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-2-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/hdmi.c | 51 +++++++++++++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 20 deletions(-)

diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 162689227a23..b73520aaf697 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -321,6 +321,17 @@ int hdmi_vendor_infoframe_init(struct hdmi_vendor_infoframe *frame)
 }
 EXPORT_SYMBOL(hdmi_vendor_infoframe_init);
 
+static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe *frame)
+{
+	/* for side by side (half) we also need to provide 3D_Ext_Data */
+	if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
+		return 6;
+	else if (frame->vic != 0 || frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
+		return 5;
+	else
+		return 4;
+}
+
 /**
  * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer
  * @frame: HDMI infoframe
@@ -341,19 +352,11 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
 	u8 *ptr = buffer;
 	size_t length;
 
-	/* empty info frame */
-	if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID)
-		return -EINVAL;
-
 	/* only one of those can be supplied */
 	if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
 		return -EINVAL;
 
-	/* for side by side (half) we also need to provide 3D_Ext_Data */
-	if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
-		frame->length = 6;
-	else
-		frame->length = 5;
+	frame->length = hdmi_vendor_infoframe_length(frame);
 
 	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
 
@@ -372,14 +375,16 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
 	ptr[5] = 0x0c;
 	ptr[6] = 0x00;
 
-	if (frame->vic) {
-		ptr[7] = 0x1 << 5;	/* video format */
-		ptr[8] = frame->vic;
-	} else {
+	if (frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) {
 		ptr[7] = 0x2 << 5;	/* video format */
 		ptr[8] = (frame->s3d_struct & 0xf) << 4;
 		if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
 			ptr[9] = (frame->s3d_ext_data & 0xf) << 4;
+	} else if (frame->vic) {
+		ptr[7] = 0x1 << 5;	/* video format */
+		ptr[8] = frame->vic;
+	} else {
+		ptr[7] = 0x0 << 5;	/* video format */
 	}
 
 	hdmi_infoframe_set_checksum(buffer, length);
@@ -1161,7 +1166,7 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
 
 	if (ptr[0] != HDMI_INFOFRAME_TYPE_VENDOR ||
 	    ptr[1] != 1 ||
-	    (ptr[2] != 5 && ptr[2] != 6))
+	    (ptr[2] != 4 && ptr[2] != 5 && ptr[2] != 6))
 		return -EINVAL;
 
 	length = ptr[2];
@@ -1189,16 +1194,22 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
 
 	hvf->length = length;
 
-	if (hdmi_video_format == 0x1) {
-		hvf->vic = ptr[4];
-	} else if (hdmi_video_format == 0x2) {
+	if (hdmi_video_format == 0x2) {
+		if (length != 5 && length != 6)
+			return -EINVAL;
 		hvf->s3d_struct = ptr[4] >> 4;
 		if (hvf->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) {
-			if (length == 6)
-				hvf->s3d_ext_data = ptr[5] >> 4;
-			else
+			if (length != 6)
 				return -EINVAL;
+			hvf->s3d_ext_data = ptr[5] >> 4;
 		}
+	} else if (hdmi_video_format == 0x1) {
+		if (length != 5)
+			return -EINVAL;
+		hvf->vic = ptr[4];
+	} else {
+		if (length != 4)
+			return -EINVAL;
 	}
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 086/115] HID: elo: clear BTN_LEFT mapping

[Sasha Levin]

From: Jiri Kosina <jkosina@suse.cz>

[ Upstream commit 9abd04af951e5734c9d5cfee9b49790844b734cf ]

ELO devices have one Button usage in GenDesk field, which makes hid-input map
it to BTN_LEFT; that confuses userspace, which then considers the device to be
a mouse/touchpad instead of touchscreen.

Fix that by unmapping BTN_LEFT and keeping only BTN_TOUCH in place.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hid/hid-elo.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hid/hid-elo.c b/drivers/hid/hid-elo.c
index 0cd4f7216239..5eea6fe0d7bd 100644
--- a/drivers/hid/hid-elo.c
+++ b/drivers/hid/hid-elo.c
@@ -42,6 +42,12 @@ static int elo_input_configured(struct hid_device *hdev,
 {
 	struct input_dev *input = hidinput->input;
 
+	/*
+	 * ELO devices have one Button usage in GenDesk field, which makes
+	 * hid-input map it to BTN_LEFT; that confuses userspace, which then
+	 * considers the device to be a mouse/touchpad instead of touchscreen.
+	 */
+	clear_bit(BTN_LEFT, input->keybit);
 	set_bit(BTN_TOUCH, input->keybit);
 	set_bit(ABS_PRESSURE, input->absbit);
 	input_set_abs_params(input, ABS_PRESSURE, 0, 256, 0, 0);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 087/115] ARM: dts: exynos: Correct Trats2 panel reset line

[Sasha Levin]

From: Simon Shields <simon@lineageos.org>

[ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ]

Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used
on early revisions of the board.

Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node")
Signed-off-by: Simon Shields <simon@lineageos.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 40a474c4374b..4c52358734ef 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -359,7 +359,7 @@
 		reg = <0>;
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 089/115] sched: Stop resched_cpu() from sending IPIs to offline CPUs

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

[ Upstream commit a0982dfa03efca6c239c52cabebcea4afb93ea6b ]

The rcutorture test suite occasionally provokes a splat due to invoking
resched_cpu() on an offline CPU:

WARNING: CPU: 2 PID: 8 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40
Modules linked in:
CPU: 2 PID: 8 Comm: rcu_preempt Not tainted 4.14.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff902ede9daf00 task.stack: ffff96c50010c000
RIP: 0010:native_smp_send_reschedule+0x37/0x40
RSP: 0018:ffff96c50010fdb8 EFLAGS: 00010096
RAX: 000000000000002e RBX: ffff902edaab4680 RCX: 0000000000000003
RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: ffff96c50010fdb8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000299f36ae R12: 0000000000000001
R13: ffffffff9de64240 R14: 0000000000000001 R15: ffffffff9de64240
FS:  0000000000000000(0000) GS:ffff902edfc80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000f7d4c642 CR3: 000000001e0e2000 CR4: 00000000000006e0
Call Trace:
 resched_curr+0x8f/0x1c0
 resched_cpu+0x2c/0x40
 rcu_implicit_dynticks_qs+0x152/0x220
 force_qs_rnp+0x147/0x1d0
 ? sync_rcu_exp_select_cpus+0x450/0x450
 rcu_gp_kthread+0x5a9/0x950
 kthread+0x142/0x180
 ? force_qs_rnp+0x1d0/0x1d0
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x27/0x40
Code: 14 01 0f 92 c0 84 c0 74 14 48 8b 05 14 4f f4 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 38 89 ca 9d e8 e5 56 08 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 52 9e 37 02 85 c0 75 38 55 48
---[ end trace 26df9e5df4bba4ac ]---

This splat cannot be generated by expedited grace periods because they
always invoke resched_cpu() on the current CPU, which is good because
expedited grace periods require that resched_cpu() unconditionally
succeed.  However, other parts of RCU can tolerate resched_cpu() acting
as a no-op, at least as long as it doesn't happen too often.

This commit therefore makes resched_cpu() invoke resched_curr() only if
the CPU is either online or is the current CPU.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/sched/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index c5b1c62623cf..65ed3501c2ca 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -601,7 +601,8 @@ void resched_cpu(int cpu)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&rq->lock, flags);
-	resched_curr(rq);
+	if (cpu_online(cpu) || cpu == smp_processor_id())
+		resched_curr(rq);
 	raw_spin_unlock_irqrestore(&rq->lock, flags);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 088/115] sched: Stop switched_to_rt() from sending IPIs to offline CPUs

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

[ Upstream commit 2fe2582649aa2355f79acddb86bd4d6c5363eb63 ]

The rcutorture test suite occasionally provokes a splat due to invoking
rt_mutex_lock() which needs to boost the priority of a task currently
sitting on a runqueue that belongs to an offline CPU:

WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40
Modules linked in:
CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000
RIP: 0010:native_smp_send_reschedule+0x37/0x40
RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082
RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004
RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff
RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d
R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d
R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200
FS:  0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0
Call Trace:
 resched_curr+0x61/0xd0
 switched_to_rt+0x8f/0xa0
 rt_mutex_setprio+0x25c/0x410
 task_blocks_on_rt_mutex+0x1b3/0x1f0
 rt_mutex_slowlock+0xa9/0x1e0
 rt_mutex_lock+0x29/0x30
 rcu_boost_kthread+0x127/0x3c0
 kthread+0x104/0x140
 ? rcu_report_unblock_qs_rnp+0x90/0x90
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x22/0x30
Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48

But the target task's priority has already been adjusted, so the only
purpose of switched_to_rt() invoking resched_curr() is to wake up the
CPU running some task that needs to be preempted by the boosted task.
But the CPU is offline, which presumably means that the task must be
migrated to some other CPU, and that this other CPU will undertake any
needed preemption at the time of migration.  Because the runqueue lock
is held when resched_curr() is invoked, we know that the boosted task
cannot go anywhere, so it is not necessary to invoke resched_curr()
in this particular case.

This commit therefore makes switched_to_rt() refrain from invoking
resched_curr() when the target CPU is offline.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/sched/rt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index e0b5169aeac4..2ef31c93e195 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2144,7 +2144,7 @@ static void switched_to_rt(struct rq *rq, struct task_struct *p)
 		if (p->nr_cpus_allowed > 1 && rq->rt.overloaded)
 			queue_push_tasks(rq);
 #endif /* CONFIG_SMP */
-		if (p->prio < rq->curr->prio)
+		if (p->prio < rq->curr->prio && cpu_online(cpu_of(rq)))
 			resched_curr(rq);
 	}
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 091/115] net: xfrm: allow clearing socket xfrm policies.

[Sasha Levin]

From: Lorenzo Colitti <lorenzo@google.com>

[ Upstream commit be8f8284cd897af2482d4e54fbc2bdfc15557259 ]

Currently it is possible to add or update socket policies, but
not clear them. Therefore, once a socket policy has been applied,
the socket cannot be used for unencrypted traffic.

This patch allows (privileged) users to clear socket policies by
passing in a NULL pointer and zero length argument to the
{IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both
the incoming and outgoing policies being cleared.

The simple approach taken in this patch cannot clear socket
policies in only one direction. If desired this could be added
in the future, for example by continuing to pass in a length of
zero (which currently is guaranteed to return EMSGSIZE) and
making the policy be a pointer to an integer that contains one
of the XFRM_POLICY_{IN,OUT} enum values.

An alternative would have been to interpret the length as a
signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the
input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output
policy.

Tested: https://android-review.googlesource.com/539816
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_policy.c | 2 +-
 net/xfrm/xfrm_state.c  | 7 +++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 4b09a9eaa35f..d95cb69460f0 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1313,7 +1313,7 @@ EXPORT_SYMBOL(xfrm_policy_delete);
 
 int xfrm_sk_policy_insert(struct sock *sk, int dir, struct xfrm_policy *pol)
 {
-	struct net *net = xp_net(pol);
+	struct net *net = sock_net(sk);
 	struct xfrm_policy *old_pol;
 
 #ifdef CONFIG_XFRM_SUB_POLICY
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 9895a8c56d8c..96d664e198bf 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1845,6 +1845,13 @@ int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen
 	struct xfrm_mgr *km;
 	struct xfrm_policy *pol = NULL;
 
+	if (!optval && !optlen) {
+		xfrm_sk_policy_insert(sk, XFRM_POLICY_IN, NULL);
+		xfrm_sk_policy_insert(sk, XFRM_POLICY_OUT, NULL);
+		__sk_dst_reset(sk);
+		return 0;
+	}
+
 	if (optlen <= 0 || optlen > PAGE_SIZE)
 		return -EMSGSIZE;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 090/115] test_firmware: fix setting old custom fw path back on exit

[Sasha Levin]

From: "Luis R. Rodriguez" <mcgrof@kernel.org>

[ Upstream commit 65c79230576873b312c3599479c1e42355c9f349 ]

The file /sys/module/firmware_class/parameters/path can be used
to set a custom firmware path. The fw_filesystem.sh script creates
a temporary directory to add a test firmware file to be used during
testing, in order for this to work it uses the custom path syfs file
and it was supposed to reset back the file on execution exit. The
script failed to do this due to a typo, it was using OLD_PATH instead
of OLD_FWPATH, since its inception since v3.17.

Its not as easy to just keep the old setting, it turns out that
resetting an empty setting won't actually do what we want, we need
to check if it was empty and set an empty space.

Without this we end up having the temporary path always set after
we run these tests.

Fixes: 0a8adf58475 ("test: add firmware_class loader test")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/firmware/fw_filesystem.sh | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index 856a1f327b3f..61f9b1dbbd9b 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -28,7 +28,10 @@ test_finish()
 	if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
 		echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
 	fi
-	echo -n "$OLD_PATH" >/sys/module/firmware_class/parameters/path
+	if [ "$OLD_FWPATH" = "" ]; then
+		OLD_FWPATH=" "
+	fi
+	echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	rm -f "$FW"
 	rmdir "$FWPATH"
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 092/115] mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@free-electrons.com>

[ Upstream commit df467899da0b71465760b4e35127bce837244eee ]

Some drivers (like nand_hynix.c) call ->cmdfunc() with NAND_CMD_NONE
and a column address and expect the controller to only send address
cycles. Right now, the default ->cmdfunc() implementations provided by
the core do not filter out the command cycle in this case and forwards
the request to the controller driver through the ->cmd_ctrl() method.
The thing is, NAND controller drivers can get this wrong and send a
command cycle with a NAND_CMD_NONE opcode and since NAND_CMD_NONE is
-1, and the command field is usually casted to an u8, we end up sending
the 0xFF command which is actually a RESET operation.

Add conditions in nand_command[_lp]() functions to sending the initial
command cycle when command == NAND_CMD_NONE.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mtd/nand/nand_base.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 27864c0863ef..8406f346b0be 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -626,7 +626,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 		chip->cmd_ctrl(mtd, readcmd, ctrl);
 		ctrl &= ~NAND_CTRL_CHANGE;
 	}
-	chip->cmd_ctrl(mtd, command, ctrl);
+	if (command != NAND_CMD_NONE)
+		chip->cmd_ctrl(mtd, command, ctrl);
 
 	/* Address cycle, when necessary */
 	ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
@@ -655,6 +656,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	 */
 	switch (command) {
 
+	case NAND_CMD_NONE:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
@@ -717,7 +719,9 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	}
 
 	/* Command latch cycle */
-	chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+	if (command != NAND_CMD_NONE)
+		chip->cmd_ctrl(mtd, command,
+			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 
 	if (column != -1 || page_addr != -1) {
 		int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
@@ -750,6 +754,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	 */
 	switch (command) {
 
+	case NAND_CMD_NONE:
 	case NAND_CMD_CACHEDPROG:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_ERASE1:
-- 
2.14.1

[PATCH AUTOSEL for 4.4 093/115] ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin

[Sasha Levin]

From: "Andrew F. Davis" <afd@ti.com>

[ Upstream commit e153db03c6b7a035c797bcdf35262586f003ee93 ]

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board")

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/am335x-pepper.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114c7464..2dbe13a3d89b 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -139,7 +139,7 @@
 &audio_codec {
 	status = "okay";
 
-	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	AVDD-supply = <&ldo3_reg>;
 	IOVDD-supply = <&ldo3_reg>;
 	DRVDD-supply = <&ldo3_reg>;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 094/115] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin

[Sasha Levin]

From: "Andrew F. Davis" <afd@ti.com>

[ Upstream commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 ]

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 27cd4abfc74d..731860314ab5 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -488,7 +488,7 @@
 	tlv320aic3x: tlv320aic3x@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -505,7 +505,7 @@
 	tlv320aic3x_aux: tlv320aic3x@19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 
 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 096/115] ASoC: tlv320aic31xx: Handle inverted BCLK in non-DSP modes

[Sasha Levin]

From: "Andrew F. Davis" <afd@ti.com>

[ Upstream commit dcb407b257af06fa58b0544ec01ec9e0d3927e02 ]

Currently BCLK inverting is only handled when the DAI format is
DSP, but the BCLK may be inverted in any supported mode. Without
this using this CODEC in any other mode than DSP with the BCLK
inverted leads to bad sampling timing and very poor audio quality.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/codecs/tlv320aic31xx.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index ee4def4f819f..80085b62d1d0 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -846,6 +846,18 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
+	/* signal polarity */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface_reg2 |= AIC31XX_BCLKINV_MASK;
+		break;
+	default:
+		dev_err(codec->dev, "Invalid DAI clock signal polarity\n");
+		return -EINVAL;
+	}
+
 	/* interface format */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
@@ -853,16 +865,12 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_DSP_A:
 		dsp_a_val = 0x1;
 	case SND_SOC_DAIFMT_DSP_B:
-		/* NOTE: BCLKINV bit value 1 equas NB and 0 equals IB */
-		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-		case SND_SOC_DAIFMT_NB_NF:
-			iface_reg2 |= AIC31XX_BCLKINV_MASK;
-			break;
-		case SND_SOC_DAIFMT_IB_NF:
-			break;
-		default:
-			return -EINVAL;
-		}
+		/*
+		 * NOTE: This CODEC samples on the falling edge of BCLK in
+		 * DSP mode, this is inverted compared to what most DAIs
+		 * expect, so we invert for this mode
+		 */
+		iface_reg2 ^= AIC31XX_BCLKINV_MASK;
 		iface_reg1 |= (AIC31XX_DSP_MODE <<
 			       AIC31XX_IFACE1_DATATYPE_SHIFT);
 		break;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 095/115] mtd: nand: ifc: update bufnum mask for ver >= 2.0.0

[Sasha Levin]

From: Jagdish Gediya <jagdish.gediya@nxp.com>

[ Upstream commit bccb06c353af3764ca86d9da47652458e6c2eb41 ]

Bufnum mask is used to calculate page position in the internal SRAM.

As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
versions which had 8KB. Hence bufnum mask needs to be updated.

Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mtd/nand/fsl_ifc_nand.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 7f4ac8c19001..aaf821bee9fd 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -988,6 +988,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	if (ctrl->version == FSL_IFC_VERSION_1_1_0)
 		fsl_ifc_sram_init(priv);
 
+	/*
+	 * As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
+	 * versions which had 8KB. Hence bufnum mask needs to be updated.
+	 */
+	if (ctrl->version >= FSL_IFC_VERSION_2_0_0)
+		priv->bufnum_mask = (priv->bufnum_mask * 2) + 1;
+
 	return 0;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 097/115] ath10k: update tdls teardown state to target

[Sasha Levin]

From: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>

[ Upstream commit 424ea0d174e82365f85c6770225dba098b8f1d5f ]

It is required to update the teardown state of the peer when
a tdls link with that peer is terminated. This information is
useful for the target to perform some cleanups wrt the tdls peer.

Without proper cleanup, target assumes that the peer is connected and
blocks future connection requests, updating the teardown state of the
peer addresses the problem.

Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version.

Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index d5c9ca47219c..09e14ce85dd0 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5497,6 +5497,16 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			   "mac vdev %d peer delete %pM (sta gone)\n",
 			   arvif->vdev_id, sta->addr);
 
+		if (sta->tdls) {
+			ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id,
+							  sta,
+							  WMI_TDLS_PEER_STATE_TEARDOWN);
+			if (ret)
+				ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n",
+					    sta->addr,
+					    WMI_TDLS_PEER_STATE_TEARDOWN, ret);
+		}
+
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
-- 
2.14.1

[PATCH AUTOSEL for 4.4 098/115] cpufreq: Fix governor module removal race

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit a8b149d32b663c1a4105273295184b78f53d33cf ]

It is possible to remove a cpufreq governor module after
cpufreq_parse_governor() has returned success in
store_scaling_governor() and before cpufreq_set_policy()
acquires a reference to it, because the governor list is
not protected during that period and nothing prevents the
governor from being unregistered then.

Prevent that from happening by acquiring an extra reference
to the governor module temporarily in cpufreq_parse_governor(),
under cpufreq_governor_mutex, and dropping it in
store_scaling_governor(), when cpufreq_set_policy() returns.

Note that the second cpufreq_parse_governor() call site is fine,
because it only cares about the policy member of new_policy.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/cpufreq/cpufreq.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index ebed319657e7..c0fb6f12f547 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -551,6 +551,8 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
 			*governor = t;
 			err = 0;
 		}
+		if (t && !try_module_get(t->owner))
+			t = NULL;
 
 		mutex_unlock(&cpufreq_governor_mutex);
 	}
@@ -669,6 +671,10 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
 		return -EINVAL;
 
 	ret = cpufreq_set_policy(policy, &new_policy);
+
+	if (new_policy.governor)
+		module_put(new_policy.governor->owner);
+
 	return ret ? ret : count;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 099/115] clk: qcom: msm8916: fix mnd_width for codec_digcodec

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit d8e488e8242ecf129eebc440c92d800a99ca109d ]

This patch fixes missing mnd_width for codec_digital clk, this is now set to
8 inline with datasheet.

Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/qcom/gcc-msm8916.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index 2e7f03d50f4e..95a4dd290f35 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -1437,6 +1437,7 @@ static const struct freq_tbl ftbl_codec_clk[] = {
 
 static struct clk_rcg2 codec_digcodec_clk_src = {
 	.cmd_rcgr = 0x1c09c,
+	.mnd_width = 8,
 	.hid_width = 5,
 	.parent_map = gcc_xo_gpll1_emclk_sleep_map,
 	.freq_tbl = ftbl_codec_clk,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 100/115] ath10k: fix invalid STS_CAP_OFFSET_MASK

[Sasha Levin]

From: Ben Greear <greearb@candelatech.com>

[ Upstream commit 8cec57f5277ef0e354e37a0bf909dc71bc1f865b ]

The 10.4 firmware defines this as a 3-bit field, as does the
mac80211 stack.  The 4th bit is defined as CONF_IMPLICIT_BF
at least in the firmware header I have seen.  This patch
fixes the ath10k wmi header to match the firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 72a4ef709577..a8b2553e8988 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4826,7 +4826,8 @@ enum wmi_10_4_vdev_param {
 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
 
 #define WMI_TXBF_STS_CAP_OFFSET_LSB	4
-#define WMI_TXBF_STS_CAP_OFFSET_MASK	0xf0
+#define WMI_TXBF_STS_CAP_OFFSET_MASK	0x70
+#define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)
 #define WMI_BF_SOUND_DIM_OFFSET_LSB	8
 #define WMI_BF_SOUND_DIM_OFFSET_MASK	0xf00
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 101/115] tools/usbip: fixes build with musl libc toolchain

[Sasha Levin]

From: Julien BOIBESSOT <julien.boibessot@armadeus.com>

[ Upstream commit 77be4c878c72e411ad22af96b6f81dd45c26450a ]

Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD.
SIGCHLD is the new POSIX name for that signal so it doesn't change
anything on other libcs.

This fixes this kind of build error:

usbipd.c: In function ‘set_signal’:
usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function)
  sigaction(SIGCLD, &act, NULL);
            ^~~~~~
usbipd.c:459:12: note: each undeclared identifier is reported only once
	for each function it appears in
Makefile:407: recipe for target 'usbipd.o' failed
make[3]: *** [usbipd.o] Error 1

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/usb/usbip/src/usbipd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/usb/usbip/src/usbipd.c b/tools/usb/usbip/src/usbipd.c
index 2a7cd2b8d966..8c5b0faba229 100644
--- a/tools/usb/usbip/src/usbipd.c
+++ b/tools/usb/usbip/src/usbipd.c
@@ -451,7 +451,7 @@ static void set_signal(void)
 	sigaction(SIGTERM, &act, NULL);
 	sigaction(SIGINT, &act, NULL);
 	act.sa_handler = SIG_IGN;
-	sigaction(SIGCLD, &act, NULL);
+	sigaction(SIGCHLD, &act, NULL);
 }
 
 static const char *pid_file;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 103/115] scsi: core: scsi_get_device_flags_keyed(): Always return device flags

[Sasha Levin]

From: Bart Van Assche <bart.vanassche@wdc.com>

[ Upstream commit a44c9d36509c83cf64f33b93f6ab2e63822c01eb ]

Since scsi_get_device_flags_keyed() callers do not check whether or not
the returned value is an error code, change that function such that it
returns a flags value even if the 'key' argument is invalid.  Note:
since commit 28a0bc4120d3 ("scsi: sd: Implement blacklist option for
WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so
checking whether bit 31 is set in the return value is not sufficient to
tell the difference between an error code and a flags value.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/scsi_devinfo.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 60720e5b1ebc..74126b8591c8 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -589,17 +589,12 @@ int scsi_get_device_flags_keyed(struct scsi_device *sdev,
 				int key)
 {
 	struct scsi_dev_info_list *devinfo;
-	int err;
 
 	devinfo = scsi_dev_info_list_find(vendor, model, key);
 	if (!IS_ERR(devinfo))
 		return devinfo->flags;
 
-	err = PTR_ERR(devinfo);
-	if (err != -ENOENT)
-		return err;
-
-	/* nothing found, return nothing */
+	/* key or device not found: return nothing */
 	if (key != SCSI_DEVINFO_GLOBAL)
 		return 0;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 102/115] spi: sun6i: disable/unprepare clocks on remove

[Sasha Levin]

From: Tobias Jordan <Tobias.Jordan@elektrobit.com>

[ Upstream commit 2d9bbd02c54094ceffa555143b0d68cd06504d63 ]

sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable
clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to
disable/unprepare them if we're not suspended.
Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure
that sun6i_spi_runtime_suspend() is called if needed.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/spi/spi-sun6i.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index e77add01b0e9..48888ab630c2 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -457,7 +457,7 @@ err_free_master:
 
 static int sun6i_spi_remove(struct platform_device *pdev)
 {
-	pm_runtime_disable(&pdev->dev);
+	pm_runtime_force_suspend(&pdev->dev);
 
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 104/115] scsi: devinfo: apply to HP XP the same flags as Hitachi VSP

[Sasha Levin]

From: Xose Vazquez Perez <xose.vazquez@gmail.com>

[ Upstream commit b369a0471503130cfc74f9f62071db97f48948c3 ]

Commit 56f3d383f37b ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI
OPEN-V blacklist entry") modified some Hitachi entries:

    HITACHI is always supporting VPD pages, even though it's claiming to
    support SCSI Revision 3 only.

The same should have been done also for HP-rebranded.

[mkp: checkpatch and tweaked commit message]

Cc: Hannes Reinecke <hare@suse.de>
Cc: Takahiro Yasui <takahiro.yasui@hds.com>
Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/scsi_devinfo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 74126b8591c8..6b61b09b3226 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -180,7 +180,7 @@ static struct {
 	{"HITACHI", "6586-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"HITACHI", "6588-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN},	/* HP VA7400 */
-	{"HP", "OPEN-", "*", BLIST_REPORTLUN2}, /* HP XP Arrays */
+	{"HP", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES}, /* HP XP Arrays */
 	{"HP", "NetRAID-4M", NULL, BLIST_FORCELUN},
 	{"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
 	{"HP", "C1557A", NULL, BLIST_FORCELUN},
-- 
2.14.1

[PATCH AUTOSEL for 4.4 105/115] scsi: dh: add new rdac devices

[Sasha Levin]

From: Xose Vazquez Perez <xose.vazquez@gmail.com>

[ Upstream commit 4b3aec2bbbce1c35f50e7475a9fd78d24b9ea4ea ]

Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500.

Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220,
D240 and D280.

Add STK BladeCtlr family, arrays: B210, B220, B240 and B280.

These changes were done in multipath-tools time ago.

Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: device-mapper development <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/scsi_dh.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index 4d655b568269..5711d58f9e81 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -56,10 +56,13 @@ static const struct scsi_dh_blist scsi_dh_blist[] = {
 	{"IBM", "1815",			"rdac", },
 	{"IBM", "1818",			"rdac", },
 	{"IBM", "3526",			"rdac", },
+	{"IBM", "3542",			"rdac", },
+	{"IBM", "3552",			"rdac", },
 	{"SGI", "TP9",			"rdac", },
 	{"SGI", "IS",			"rdac", },
-	{"STK", "OPENstorage D280",	"rdac", },
+	{"STK", "OPENstorage",		"rdac", },
 	{"STK", "FLEXLINE 380",		"rdac", },
+	{"STK", "BladeCtlr",		"rdac", },
 	{"SUN", "CSM",			"rdac", },
 	{"SUN", "LCSM100",		"rdac", },
 	{"SUN", "STK6580_6780",		"rdac", },
-- 
2.14.1

[PATCH AUTOSEL for 4.4 106/115] media: cpia2: Fix a couple off by one bugs

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d5ac225c7d64c9c3ef821239edc035634e594ec9 ]

The cam->buffers[] array has cam->num_frames elements so the > needs to
be changed to >= to avoid going beyond the end of the array.  The
->buffers[] array is allocated in cpia2_allocate_buffers() if you want
to confirm.

Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/usb/cpia2/cpia2_v4l.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2_v4l.c b/drivers/media/usb/cpia2/cpia2_v4l.c
index 9caea8344547..d793c630f1dd 100644
--- a/drivers/media/usb/cpia2/cpia2_v4l.c
+++ b/drivers/media/usb/cpia2/cpia2_v4l.c
@@ -812,7 +812,7 @@ static int cpia2_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 	struct camera_data *cam = video_drvdata(file);
 
 	if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-	   buf->index > cam->num_frames)
+	   buf->index >= cam->num_frames)
 		return -EINVAL;
 
 	buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer;
@@ -863,7 +863,7 @@ static int cpia2_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 
 	if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
 	   buf->memory != V4L2_MEMORY_MMAP ||
-	   buf->index > cam->num_frames)
+	   buf->index >= cam->num_frames)
 		return -EINVAL;
 
 	DBG("QBUF #%d\n", buf->index);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 107/115] veth: set peer GSO values

[Sasha Levin]

From: Stephen Hemminger <stephen@networkplumber.org>

[ Upstream commit 72d24955b44a4039db54a1c252b5031969eeaac3 ]

When new veth is created, and GSO values have been configured
on one device, clone those values to the peer.

For example:
   # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2

This should create vm1 <--> vm2 with both having GSO maximum
size set to 65530.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/veth.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index ba21d072be31..6b4cc1c2e6b4 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -399,6 +399,9 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 	if (ifmp && (dev->ifindex != 0))
 		peer->ifindex = ifmp->ifi_index;
 
+	peer->gso_max_size = dev->gso_max_size;
+	peer->gso_max_segs = dev->gso_max_segs;
+
 	err = register_netdevice(peer);
 	put_net(net);
 	net = NULL;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 108/115] drm/amdkfd: Fix memory leaks in kfd topology

[Sasha Levin]

From: Yong Zhao <yong.zhao@amd.com>

[ Upstream commit 5108d768408abc80e4e8d99f5b406a73cb04056b ]

Kobject created using kobject_create_and_add() can be freed using
kobject_put() when there is no referenece any more. However,
kobject memory allocated with kzalloc() has to set up a release
callback in order to free it when the counter decreases to 0.
Otherwise it causes memory leak.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
index 74909e72a009..2acbd43f9a53 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -519,11 +519,17 @@ static ssize_t sysprops_show(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
+static void kfd_topology_kobj_release(struct kobject *kobj)
+{
+	kfree(kobj);
+}
+
 static const struct sysfs_ops sysprops_ops = {
 	.show = sysprops_show,
 };
 
 static struct kobj_type sysprops_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &sysprops_ops,
 };
 
@@ -559,6 +565,7 @@ static const struct sysfs_ops iolink_ops = {
 };
 
 static struct kobj_type iolink_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &iolink_ops,
 };
 
@@ -586,6 +593,7 @@ static const struct sysfs_ops mem_ops = {
 };
 
 static struct kobj_type mem_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &mem_ops,
 };
 
@@ -625,6 +633,7 @@ static const struct sysfs_ops cache_ops = {
 };
 
 static struct kobj_type cache_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &cache_ops,
 };
 
@@ -747,6 +756,7 @@ static const struct sysfs_ops node_ops = {
 };
 
 static struct kobj_type node_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &node_ops,
 };
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 109/115] agp/intel: Flush all chipset writes after updating the GGTT

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 8516673a996870ea0ceb337ee4f83c33c5ec3111 ]

Before accessing the GGTT we must flush the PTE writes and make them
visible to the chipset, or else the indirect access may end up in the
wrong page. In commit 3497971a71d8 ("agp/intel: Flush chipset writes
after updating a single PTE"), we noticed corruption of the uploads for
pwrite and for capturing GPU error states, but it was presumed that the
explicit calls to intel_gtt_chipset_flush() were sufficient for the
execbuffer path. However, we have not been flushing the chipset between
the PTE writes and access via the GTT itself.

For simplicity, do the flush after any PTE update rather than try and
batch the flushes on a just-in-time basis.

References: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/agp/intel-gtt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 1341a94cc779..76afc841232c 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -859,6 +859,8 @@ void intel_gtt_insert_sg_entries(struct sg_table *st,
 		}
 	}
 	wmb();
+	if (intel_private.driver->chipset_flush)
+		intel_private.driver->chipset_flush();
 }
 EXPORT_SYMBOL(intel_gtt_insert_sg_entries);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 110/115] mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED

[Sasha Levin]

From: Adiel Aloni <adiel.aloni@intel.com>

[ Upstream commit e16ea4bb516bc21ea2202f2107718b29218bea59 ]

Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll,
only if PS_ENABLED was set before.
This is required due to commit c9491367b759 ("mac80211: always update the
PM state of a peer on MGMT / DATA frames") that enforces the ap to
check only mgmt/data frames ps bit, and then update station's power save
accordingly.
When sending only ps-poll (control frame) the ap will not be aware that
the station entered power save.
Setting ps enable before triggering ps_poll, will send NDP with PM bit
enabled first.

Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index f877fbc7d7af..8a9164da6c50 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -699,16 +699,21 @@ static int hwsim_fops_ps_write(void *dat, u64 val)
 	    val != PS_MANUAL_POLL)
 		return -EINVAL;
 
-	old_ps = data->ps;
-	data->ps = val;
-
-	local_bh_disable();
 	if (val == PS_MANUAL_POLL) {
+		if (data->ps != PS_ENABLED)
+			return -EINVAL;
+		local_bh_disable();
 		ieee80211_iterate_active_interfaces_atomic(
 			data->hw, IEEE80211_IFACE_ITER_NORMAL,
 			hwsim_send_ps_poll, data);
-		data->ps_poll_pending = true;
-	} else if (old_ps == PS_DISABLED && val != PS_DISABLED) {
+		local_bh_enable();
+		return 0;
+	}
+	old_ps = data->ps;
+	data->ps = val;
+
+	local_bh_disable();
+	if (old_ps == PS_DISABLED && val != PS_DISABLED) {
 		ieee80211_iterate_active_interfaces_atomic(
 			data->hw, IEEE80211_IFACE_ITER_NORMAL,
 			hwsim_send_nullfunc_ps, data);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 111/115] mac80211: remove BUG() when interface type is invalid

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit c7976f5272486e4ff406014c4b43e2fa3b70b052 ]

In the ieee80211_setup_sdata() we check if the interface type is valid
and, if not, call BUG().  This should never happen, but if there is
something wrong with the code, it will not be caught until the bug
happens when an interface is being set up.  Calling BUG() is too
extreme for this and a WARN_ON() would be better used instead.  Change
that.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/iface.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index bcb0a1b64556..58588a610b05 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1441,7 +1441,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
-		BUG();
+		WARN_ON(1);
 		break;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 112/115] ASoC: nuc900: Fix a loop timeout test

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 65a12b3aafed5fc59f4ce41b22b752b1729e6701 ]

We should be finishing the loop with timeout set to zero but because
this is a post-op we finish with timeout == -1.

Fixes: 1082e2703a2d ("ASoC: NUC900/audio: add nuc900 audio driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/nuc900/nuc900-ac97.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
index b6615affe571..fde974d52bb2 100644
--- a/sound/soc/nuc900/nuc900-ac97.c
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -67,7 +67,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97,
 
 	/* polling the AC_R_FINISH */
 	while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH)
-								&& timeout--)
+								&& --timeout)
 		mdelay(1);
 
 	if (!timeout) {
@@ -121,7 +121,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
 
 	/* polling the AC_W_FINISH */
 	while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH)
-								&& timeout--)
+								&& --timeout)
 		mdelay(1);
 
 	if (!timeout)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 114/115] rcutorture/configinit: Fix build directory error message

[Sasha Levin]

From: SeongJae Park <sj38.park@gmail.com>

[ Upstream commit 2adfa4210f8f35cdfb4e08318cc06b99752964c2 ]

The 'configinit.sh' script checks the format of optional argument for the
build directory, printing an error message if the format is not valid.
However, the error message uses the wrong variable, indicating an empty
string even though the user entered a non-empty (but erroneous) string.
This commit fixes the script to use the correct variable.

Fixes: c87b9c601ac8 ("rcutorture: Add KVM-based test framework")

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/rcutorture/bin/configinit.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh
index 3f81a1095206..50a6371b2b2e 100755
--- a/tools/testing/selftests/rcutorture/bin/configinit.sh
+++ b/tools/testing/selftests/rcutorture/bin/configinit.sh
@@ -51,7 +51,7 @@ then
 			mkdir $builddir
 		fi
 	else
-		echo Bad build directory: \"$builddir\"
+		echo Bad build directory: \"$buildloc\"
 		exit 2
 	fi
 fi
-- 
2.14.1

[PATCH AUTOSEL for 4.4 113/115] ipvlan: add L2 check for packets arriving via virtual devices

[Sasha Levin]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit 92ff42645028fa6f9b8aa767718457b9264316b4 ]

Packets that don't have dest mac as the mac of the master device should
not be entertained by the IPvlan rx-handler. This is mostly true as the
packet path mostly takes care of that, except when the master device is
a virtual device. As demonstrated in the following case -

  ip netns add ns1
  ip link add ve1 type veth peer name ve2
  ip link add link ve2 name iv1 type ipvlan mode l2
  ip link set dev iv1 netns ns1
  ip link set ve1 up
  ip link set ve2 up
  ip -n ns1 link set iv1 up
  ip addr add 192.168.10.1/24 dev ve1
  ip -n ns1 addr 192.168.10.2/24 dev iv1
  ping -c2 192.168.10.2
  <Works!>
  ip neigh show dev ve1
  ip neigh show 192.168.10.2 lladdr <random> dev ve1
  ping -c2 192.168.10.2
  <Still works! Wrong!!>

This patch adds that missing check in the IPvlan rx-handler.

Reported-by: Amit Sikka <amit.sikka@ericsson.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ipvlan/ipvlan_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index 8aecea0d5dbf..142015af43db 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -282,6 +282,10 @@ static int ipvlan_rcv_frame(struct ipvl_addr *addr, struct sk_buff **pskb,
 		if (dev_forward_skb(ipvlan->dev, skb) == NET_RX_SUCCESS)
 			success = true;
 	} else {
+		if (!ether_addr_equal_64bits(eth_hdr(skb)->h_dest,
+					     ipvlan->phy_dev->dev_addr))
+			skb->pkt_type = PACKET_OTHERHOST;
+
 		ret = RX_HANDLER_ANOTHER;
 		success = true;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.4 115/115] ima: relax requiring a file signature for new files with zero length

[Sasha Levin]

From: Mimi Zohar <zohar@linux.vnet.ibm.com>

[ Upstream commit b7e27bc1d42e8e0cc58b602b529c25cd0071b336 ]

Custom policies can require file signatures based on LSM labels.  These
files are normally created and only afterwards labeled, requiring them
to be signed.

Instead of requiring file signatures based on LSM labels, entire
filesystems could require file signatures.  In this case, we need the
ability of writing new files without requiring file signatures.

The definition of a "new" file was originally defined as any file with
a length of zero.  Subsequent patches redefined a "new" file to be based
on the FILE_CREATE open flag.  By combining the open flag with a file
size of zero, this patch relaxes the file signature requirement.

Fixes: 1ac202e978e1 ima: accept previously set IMA_NEW_FILE
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 security/integrity/ima/ima_appraise.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c
index 19014293f927..8da7c91b725d 100644
--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -206,7 +206,8 @@ int ima_appraise_measurement(int func, struct integrity_iint_cache *iint,
 		if (opened & FILE_CREATED)
 			iint->flags |= IMA_NEW_FILE;
 		if ((iint->flags & IMA_NEW_FILE) &&
-		    !(iint->flags & IMA_DIGSIG_REQUIRED))
+		    (!(iint->flags & IMA_DIGSIG_REQUIRED) ||
+		     (inode->i_size == 0)))
 			status = INTEGRITY_PASS;
 		goto out;
 	}
-- 
2.14.1