From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752016AbeDJFUQ (ORCPT ); Tue, 10 Apr 2018 01:20:16 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:65223 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751778AbeDJFUN (ORCPT ); Tue, 10 Apr 2018 01:20:13 -0400 From: Philippe Cornu To: Archit Taneja , Andrzej Hajda , Laurent Pinchart , David Airlie , Rob Herring , "Mark Rutland" , , , CC: Yannick Fertre , Philippe Cornu , Benjamin Gaignard , Alexandre Torgue Subject: [PATCH 1/2] dt-bindings/display/bridge: sii902x: add optional power supplies Date: Tue, 10 Apr 2018 07:19:26 +0200 Message-ID: <20180410051927.8268-2-philippe.cornu@st.com> X-Mailer: git-send-email 2.15.1 In-Reply-To: <20180410051927.8268-1-philippe.cornu@st.com> References: <20180410051927.8268-1-philippe.cornu@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.129.6.58] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-04-10_01:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add the 3 optional power supplies using the exact description found in the document named "SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)". Signed-off-by: Philippe Cornu --- Documentation/devicetree/bindings/display/bridge/sii902x.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 56a3e68ccb80..cf53678fe574 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -8,6 +8,9 @@ Optional properties: - interrupts-extended or interrupt-parent + interrupts: describe the interrupt line used to inform the host about hotplug events. - reset-gpios: OF device-tree gpio specification for RST_N pin. + - iovcc-supply: I/O supply voltage (1.8V or 3.3V, host-dependent). + - avcc12-supply: TMDS analog supply voltage (1.2V). + - cvcc12-supply: Digital core supply voltage (1.2V). Optional subnodes: - video input: this subnode can contain a video input port node -- 2.15.1