[PATCH v2 2/3] platform: x86: intel_cht_int33fe: Fix dependencies

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

The driver will not probe unless bq24190 is loaded, so
making it a dependency.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/Kconfig   | 3 +--
 drivers/platform/x86/Kconfig | 4 ++--
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 99edffae27f6..4f8df2ec87b1 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -202,8 +202,7 @@ config I2C_CHT_WC
 
 	  Note this controller is hooked up to a TI bq24292i charger-IC,
 	  combined with a FUSB302 Type-C port-controller as such it is advised
-	  to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
-	  (the fusb302 driver currently is in drivers/staging).
+	  to also select CONFIG_TYPEC_FUSB302=m.
 
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 566644bb496a..f27cb186437d 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -866,6 +866,7 @@ config ACPI_CMPC
 config INTEL_CHT_INT33FE
 	tristate "Intel Cherry Trail ACPI INT33FE Driver"
 	depends on X86 && ACPI && I2C && REGULATOR
+	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
 	---help---
 	  This driver add support for the INT33FE ACPI device found on
 	  some Intel Cherry Trail devices.
@@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE
 	  i2c drivers for these chips can bind to the them.
 
 	  If you enable this driver it is advised to also select
-	  CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
-	  CONFIG_BATTERY_MAX17042=m.
+	  CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
 
 config INTEL_INT0002_VGPIO
 	tristate "Intel ACPI INT0002 Virtual GPIO driver"
-- 
2.17.0