linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Matias Bjørling" <mb@lightnvm.io>
To: axboe@fb.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Matias Bjørling" <mb@lightnvm.io>
Subject: [GIT PULL 00/20] lightnvm updates for 4.18
Date: Mon, 28 May 2018 10:58:21 +0200	[thread overview]
Message-ID: <20180528085841.26684-1-mb@lightnvm.io> (raw)

Hi Jens,

Please pick up the following patches.

 - Hans reworked the write error recovery path in pblk.
 - Igor added extra error handling for lines, and fixed a bug in the
   pblk ringbuffer during GC.
 - Javier refactored the pblk code a bit, added extra error
   handling, and added checks to verify that data returned from drive
   is appropriate.
 - Marcin added some extra logic to manage the write buffer. Now
   MW_CUNITS can be zero and the size of write buffer can be changed
   at module load time.

Thanks,
Matias

Hans Holmberg (3):
  lightnvm: pblk: rework write error recovery path
  lightnvm: pblk: garbage collect lines with failed writes
  lightnvm: pblk: fix smeta write error path

Igor Konopko (4):
  lightnvm: proper error handling for pblk_bio_add_pages
  lightnvm: error handling when whole line is bad
  lightnvm: fix partial read error path
  lightnvm: pblk: sync RB and RL states during GC

Javier González (11):
  lightnvm: pblk: fail gracefully on line alloc. failure
  lightnvm: pblk: recheck for bad lines at runtime
  lightnvm: pblk: check read lba on gc path
  lightnvn: pblk: improve error msg on corrupted LBAs
  lightnvm: pblk: warn in case of corrupted write buffer
  lightnvm: pblk: return NVM_ error on failed submission
  lightnvm: pblk: remove unnecessary indirection
  lightnvm: pblk: remove unnecessary argument
  lightnvm: pblk: check for chunk size before allocating it
  lightnvn: pass flag on graceful teardown to targets
  lightnvm: pblk: remove dead function

Marcin Dziegielewski (2):
  lightnvm: pblk: handle case when mw_cunits equals to 0
  lightnvm: pblk: add possibility to set write buffer size manually

 drivers/lightnvm/core.c          |  10 +-
 drivers/lightnvm/pblk-core.c     | 149 +++++++++++++++------
 drivers/lightnvm/pblk-gc.c       | 112 ++++++++++------
 drivers/lightnvm/pblk-init.c     | 112 +++++++++++-----
 drivers/lightnvm/pblk-map.c      |  33 +++--
 drivers/lightnvm/pblk-rb.c       |  51 +------
 drivers/lightnvm/pblk-read.c     |  83 +++++++++---
 drivers/lightnvm/pblk-recovery.c |  91 -------------
 drivers/lightnvm/pblk-rl.c       |  29 +++-
 drivers/lightnvm/pblk-sysfs.c    |  15 ++-
 drivers/lightnvm/pblk-write.c    | 281 +++++++++++++++++++++++++--------------
 drivers/lightnvm/pblk.h          |  43 +++---
 drivers/nvme/host/lightnvm.c     |   1 -
 include/linux/lightnvm.h         |   2 +-
 14 files changed, 604 insertions(+), 408 deletions(-)

-- 
2.11.0

             reply	other threads:[~2018-05-28  8:58 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-28  8:58 Matias Bjørling [this message]
2018-05-28  8:58 ` [GIT PULL 01/20] lightnvm: pblk: fail gracefully on line alloc. failure Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 02/20] lightnvm: pblk: recheck for bad lines at runtime Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 03/20] lightnvm: pblk: check read lba on gc path Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 04/20] lightnvm: pblk: improve error msg on corrupted LBAs Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 05/20] lightnvm: pblk: warn in case of corrupted write buffer Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 06/20] lightnvm: pblk: return NVM_ error on failed submission Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 07/20] lightnvm: pblk: remove unnecessary indirection Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 08/20] lightnvm: pblk: remove unnecessary argument Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 09/20] lightnvm: pblk: check for chunk size before allocating it Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 10/20] lightnvm: pass flag on graceful teardown to targets Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 11/20] lightnvm: pblk: remove dead function Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 12/20] lightnvm: pblk: rework write error recovery path Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 13/20] lightnvm: pblk: garbage collect lines with failed writes Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 14/20] lightnvm: pblk: fix smeta write error path Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 15/20] lightnvm: proper error handling for pblk_bio_add_pages Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 16/20] lightnvm: error handling when whole line is bad Matias Bjørling
2018-05-28 10:59   ` Javier Gonzalez
2018-05-29 13:15     ` Konopko, Igor J
2018-05-29 18:29       ` Javier Gonzalez
2018-05-28  8:58 ` [GIT PULL 17/20] lightnvm: fix partial read error path Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 18/20] lightnvm: pblk: handle case when mw_cunits equals to 0 Matias Bjørling
2018-05-28 11:02   ` Javier Gonzalez
2018-06-04 10:09     ` Dziegielewski, Marcin
2018-06-04 10:21       ` Javier Gonzalez
2018-06-04 11:11         ` Dziegielewski, Marcin
2018-06-04 11:15           ` Javier Gonzalez
2018-06-04 17:17             ` Dziegielewski, Marcin
2018-06-05  7:12               ` Javier Gonzalez
2018-06-05  9:18                 ` Dziegielewski, Marcin
2018-05-28  8:58 ` [GIT PULL 19/20] lightnvm: pblk: add possibility to set write buffer size manually Matias Bjørling
2018-05-28  8:58 ` [GIT PULL 20/20] lightnvm: pblk: sync RB and RL states during GC Matias Bjørling
2018-05-28 10:51   ` Javier Gonzalez
2018-05-29 13:07     ` Konopko, Igor J
2018-05-29 17:58       ` Javier Gonzalez
2018-06-01 10:45 ` [GIT PULL 00/20] lightnvm updates for 4.18 Matias Bjørling
2018-06-01 12:36   ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180528085841.26684-1-mb@lightnvm.io \
    --to=mb@lightnvm.io \
    --cc=axboe@fb.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).