public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mfd: arizona: Don't use regmap_read_poll_timeout
Date: Mon, 4 Jun 2018 06:44:52 +0100	[thread overview]
Message-ID: <20180604054452.GD17993@dell> (raw)
In-Reply-To: <20180511135030.14590-1-ckeepax@opensource.cirrus.com>

On Fri, 11 May 2018, Charles Keepax wrote:

> Some Arizona CODECs have a small timing window where they will
> NAK an I2C transaction if it happens before the boot done bit is
> set. This can cause the read of the register containing the boot
> done bit to fail until it is set. Since regmap_read_poll_timeout
> will abort polling if a read fails it can't be reliably used to
> poll the boot done bit over I2C.
> 
> Do a partial revert of ef84f885e037 ("mfd: arizona: Refactor
> arizona_poll_reg"), removing the regmap_read_poll_timeout but
> leaving the refactoring to make the arizona_poll_reg take more
> sensible arguments.
> 
> Fixes: ef84f885e037 ("mfd: arizona: Refactor arizona_poll_reg")
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
>  drivers/mfd/arizona-core.c | 29 +++++++++++++++++++++--------
>  1 file changed, 21 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 83f1c5a516d9..2ed29ce08dac 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -240,18 +240,31 @@ static int arizona_poll_reg(struct arizona *arizona,
>  			    int timeout_ms, unsigned int reg,
>  			    unsigned int mask, unsigned int target)
>  {
> +	ktime_t timeout = ktime_add_us(ktime_get(), timeout_ms * 1000);

USEC_PER_MSEC ?

>  	unsigned int val = 0;
>  	int ret;
>  
> -	ret = regmap_read_poll_timeout(arizona->regmap,
> -				       reg, val, ((val & mask) == target),
> -				       ARIZONA_REG_POLL_DELAY_US,
> -				       timeout_ms * 1000);
> -	if (ret)
> -		dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n",
> -			reg, val);
> +	while (true) {
> +		ret = regmap_read(arizona->regmap, reg, &val);
>  
> -	return ret;
> +		if ((val & mask) == target)
> +			return 0;
> +
> +		if (ktime_compare(ktime_get(), timeout) > 0)
> +			break;
> +
> +		usleep_range(ARIZONA_REG_POLL_DELAY_US / 2,
> +			     ARIZONA_REG_POLL_DELAY_US);
> +	}
> +
> +	if (ret) {
> +		dev_err(arizona->dev, "Failed polling reg 0x%x: %d\n",
> +			reg, ret);
> +		return ret;
> +	}
> +
> +	dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
> +	return -ETIMEDOUT;
>  }
>  
>  static int arizona_wait_for_boot(struct arizona *arizona)

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2018-06-04  5:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-11 13:50 [PATCH] mfd: arizona: Don't use regmap_read_poll_timeout Charles Keepax
2018-06-04  5:44 ` Lee Jones [this message]
2018-06-04  9:40   ` Andy Shevchenko
2018-06-04 10:27     ` Charles Keepax
2018-06-04 10:55       ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180604054452.GD17993@dell \
    --to=lee.jones@linaro.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox