Re: [PATCH 03/11] spi: Add a driver for the Freescale/NXP QuadSPI controller

[Boris Brezillon <boris.brezillon@bootlin.com>]

On Fri, 15 Jun 2018 15:55:41 +0200
Boris Brezillon <boris.brezillon@bootlin.com> wrote:

> On Fri, 15 Jun 2018 13:42:12 +0000
> Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> wrote:
> 
> > Hi Boris,
> > 
> > I am still debugging the issue.
> > With some analysis, able to check that proper values are not being written for QUADSPI_SFA2AD/ QUADSPI_SFB1AD/ QUADSPI_SFB2AD register.
> > 
> > In current code, value of map_addr are being assigned to these register.
> >              map_addr = q->memmap_phy +
> >                         2 * q->devtype_data->ahb_buf_size;
> > 
> >      qspi_writel(q, map_addr, q->iobase + QUADSPI_SFA1AD + (i * 4));
> > 
> > But instead of "q->devtype_data->ahb_buf_size" it should be flash size.  
> 
> No, because we're only using 2 * ->ahb_buf_size in the direct mapping
> for each device, and we're modifying the mapping dynamically based on
> the selected device. Maybe we got the logic wrong though.
> 
> > For my case flash size is 0x4000000 and with this hard coded value I am able to perform Write and Erase operation.
> > One more change, I have to do is adding the flash_size when writing the base_address in SFAR register for case when "mem->spi->chip_select == 1"
> > 	qspi_writel(q, q->memmap_phy + 0x4000000, base + QUADSPI_SFAR);  
> 
> I don't want to expose the full device in the direct mapping yet
> (that's part of the direct-mapping API I posted here [1]). What this
> version of the driver does is, map only 2 time the ahb_size so that we
> can bypass the internal cache of the QSPI engine.

Oops, forgot to add the link.

[1]http://lists.infradead.org/pipermail/linux-mtd/2018-June/081460.html