From: Nishanth Menon <nm@ti.com>
To: Will Deacon <will.deacon@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>,
Russell King <linux@armlinux.org.uk>,
Santosh Shilimkar <ssantosh@kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
Sekhar Nori <nsekhar@ti.com>, Olof Johansson <olof@lixom.net>,
Arnd Bergmann <arnd@arndb.de>,
Sudeep Holla <sudeep.holla@arm.com>
Subject: [PATCH 5/5] arm64: dts: ti: Add support for AM654 EVM base board
Date: Tue, 19 Jun 2018 14:42:53 -0500 [thread overview]
Message-ID: <20180619194253.27288-6-nm@ti.com> (raw)
In-Reply-To: <20180619194253.27288-1-nm@ti.com>
The EValuation Module(EVM) platform for AM654 consists of a
common Base board + one or more of daughter cards, which include:
a) "Personality Modules", which can be specific to a profile, such as
ICSSG enabled or Multi-media (including audio).
b) SERDES modules, which may be 2 lane PCIe or two port PCIe + USB2
c) Camera daughter card
d) various display panels
Among other options. There are two basic configurations defined which
include an "EVM" configuration and "IDK" (Industrial development kit)
which differ in the specific combination of daughter cards that are
used.
To simplify support, we choose to support just the base board as the
core device tree file and all daughter cards would be expected to be
device tree overlays.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since RFC:
* Since defaults are enabled, and uart has been spun off, dropped the
redundant nodes from baseboard dts
RFC: https://patchwork.kernel.org/patch/10447741/
MAINTAINERS | 1 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/ti/Makefile | 9 +++++++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 36 ++++++++++++++++++++++++++
4 files changed, 47 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/Makefile
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-base-board.dts
diff --git a/MAINTAINERS b/MAINTAINERS
index 6785ceaf5b0b..e9e916d1fb52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2093,6 +2093,7 @@ M: Nishanth Menon <nm@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/arm/ti/k3.txt
+F: arch/arm64/boot/dts/ti/Makefile
F: arch/arm64/boot/dts/ti/k3-*
ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 3543bc324553..4690364d584b 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -23,5 +23,6 @@ subdir-y += rockchip
subdir-y += socionext
subdir-y += sprd
subdir-y += synaptics
+subdir-y += ti
subdir-y += xilinx
subdir-y += zte
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
new file mode 100644
index 000000000000..63e619d0b5b8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Make file to build device tree binaries for boards based on
+# Texas Instruments Inc processors
+#
+# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+#
+
+dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
new file mode 100644
index 000000000000..af6956fdc13f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+
+/ {
+ compatible = "ti,am654-evm", "ti,am654";
+ model = "Texas Instruments AM654 Base Board";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ bootargs = "earlycon=ns16550a,mmio32,0x02800000";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 4G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ secure_ddr: secure_ddr@9e800000 {
+ reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+ alignment = <0x1000>;
+ no-map;
+ };
+ };
+};
--
2.15.1
next prev parent reply other threads:[~2018-06-19 19:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-19 19:42 [PATCH 0/5] arm64: Initial support Texas Instrument's AM654 Platform Nishanth Menon
2018-06-19 19:42 ` [PATCH 1/5] dt-bindings: arm: ti: Add bindings for AM654 SoC Nishanth Menon
2018-06-19 19:42 ` [PATCH 2/5] arm64: Add support for TI's K3 Multicore SoC architecture Nishanth Menon
2018-06-19 19:42 ` [PATCH 3/5] arm64: dts: ti: Add Support for AM654 SoC Nishanth Menon
2018-06-21 5:37 ` Tony Lindgren
2018-06-21 11:36 ` Nishanth Menon
2018-06-19 19:42 ` [PATCH 4/5] soc: ti: Add Support for AM654 SoC config option Nishanth Menon
2018-06-19 19:42 ` Nishanth Menon [this message]
2018-06-21 5:40 ` [PATCH 0/5] arm64: Initial support Texas Instrument's AM654 Platform Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180619194253.27288-6-nm@ti.com \
--to=nm@ti.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox