public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	David Lechner <david@lechnology.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 8/9] ARM: davinci: mityomapl138: use aemif platform driver
Date: Mon, 25 Jun 2018 17:29:19 +0200	[thread overview]
Message-ID: <20180625152920.11549-9-brgl@bgdev.pl> (raw)
In-Reply-To: <20180625152920.11549-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in mityomapl138.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 55 ++++++++++++++++------
 1 file changed, 41 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2cce0d7d2f2a..b0fdea355d96 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -30,6 +30,7 @@
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
 #include <mach/mux.h>
 #include <linux/platform_data/spi-davinci.h>
 
@@ -422,27 +423,53 @@ static struct resource mityomapl138_nandflash_resource[] = {
 	},
 };
 
-static struct platform_device mityomapl138_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mityomapl138_nandflash_data,
+static struct platform_device mityomapl138_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &mityomapl138_nandflash_data,
+		},
+		.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
+		.resource	= mityomapl138_nandflash_resource,
 	},
-	.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-	.resource	= mityomapl138_nandflash_resource,
 };
 
-static struct platform_device *mityomapl138_devices[] __initdata = {
-	&mityomapl138_nandflash_device,
+static struct resource mityomapl138_aemif_resources[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
+	{
+		.cs	= 1,
+	},
+};
+
+static struct aemif_platform_data mityomapl138_aemif_pdata = {
+	.abus_data		= mityomapl138_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(mityomapl138_aemif_abus_data),
+	.sub_devices		= mityomapl138_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(mityomapl138_aemif_devices),
+};
+
+static struct platform_device mityomapl138_aemif_device = {
+	.name		= "ti-aemif",
+	.dev = {
+		.platform_data	= &mityomapl138_aemif_pdata,
+	},
+	.resource	= mityomapl138_aemif_resources,
+	.num_resources	= ARRAY_SIZE(mityomapl138_aemif_resources),
+	.id		= -1,
 };
 
 static void __init mityomapl138_setup_nand(void)
 {
-	platform_add_devices(mityomapl138_devices,
-				 ARRAY_SIZE(mityomapl138_devices));
-
-	if (davinci_aemif_setup(&mityomapl138_nandflash_device))
-		pr_warn("%s: Cannot configure AEMIF\n", __func__);
+	if (platform_device_register(&mityomapl138_aemif_device))
+		pr_warn("%s: Cannot register AEMIF device\n", __func__);
 }
 
 static const short mityomap_mii_pins[] = {
-- 
2.17.1


  parent reply	other threads:[~2018-06-25 15:31 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-25 15:29 [PATCH 0/9] ARM: davinci: deduplicate aemif support Bartosz Golaszewski
2018-06-25 15:29 ` [PATCH 1/9] clk: davinci: psc-dm365: use two lookup entries for the aemif clock Bartosz Golaszewski
2018-06-25 15:53   ` David Lechner
2018-06-25 16:01     ` Bartosz Golaszewski
2018-06-25 16:06       ` David Lechner
2018-06-25 16:09         ` Bartosz Golaszewski
2018-06-26  8:27         ` Bartosz Golaszewski
2018-06-25 15:29 ` [PATCH 2/9] ARM: davinci: omapl138-hawk: add aemif & nand support Bartosz Golaszewski
2018-06-25 16:08   ` David Lechner
2018-06-25 15:29 ` [PATCH 3/9] ARM: davinci: da850-evm: use aemif platform driver in legacy mode Bartosz Golaszewski
2018-06-25 16:00   ` David Lechner
2018-06-25 16:04   ` David Lechner
2018-06-25 15:29 ` [PATCH 4/9] ARM: davinci: dm365-evm: use the ti-aemif soc driver Bartosz Golaszewski
2018-06-25 15:29 ` [PATCH 5/9] ARM: davinci: dm644x-evm: use aemif platform driver Bartosz Golaszewski
2018-06-25 15:29 ` [PATCH 6/9] ARM: davinci: da830-evm: " Bartosz Golaszewski
2018-06-25 16:20   ` David Lechner
2018-06-25 16:23     ` Bartosz Golaszewski
2018-06-25 16:29       ` David Lechner
2018-06-25 15:29 ` [PATCH 7/9] ARM: davinci: dm646x-evm: " Bartosz Golaszewski
2018-06-25 15:29 ` Bartosz Golaszewski [this message]
2018-06-25 15:29 ` [PATCH 9/9] ARM: davinci: kill davinci_aemif_setup() Bartosz Golaszewski
2018-06-25 16:23   ` David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180625152920.11549-9-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=bgolaszewski@baylibre.com \
    --cc=david@lechnology.com \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mturquette@baylibre.com \
    --cc=nsekhar@ti.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox