public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	Michael Straube <straube.linux@gmail.com>
Subject: [PATCH] staging: rtl8188eu: remove rtw_ioctl_rtl.h
Date: Sat, 30 Jun 2018 16:59:41 +0200	[thread overview]
Message-ID: <20180630145941.13118-1-straube.linux@gmail.com> (raw)

The header rtw_ioctl_rtl.h is not used anywhere.
Running 'grep -r rtw_ioctl_rtl *' from kernel root
directory returns nothing, remove the file.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
 .../staging/rtl8188eu/include/rtw_ioctl_rtl.h | 66 -------------------
 1 file changed, 66 deletions(-)
 delete mode 100644 drivers/staging/rtl8188eu/include/rtw_ioctl_rtl.h

diff --git a/drivers/staging/rtl8188eu/include/rtw_ioctl_rtl.h b/drivers/staging/rtl8188eu/include/rtw_ioctl_rtl.h
deleted file mode 100644
index e29ebfd40a58..000000000000
--- a/drivers/staging/rtl8188eu/include/rtw_ioctl_rtl.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-#ifndef _RTW_IOCTL_RTL_H_
-#define _RTW_IOCTL_RTL_H_
-
-#include <osdep_service.h>
-#include <drv_types.h>
-
-/*  oid_rtl_seg_01_01 ************** */
-int oid_rt_get_signal_quality_hdl(struct oid_par_priv *poid_par_priv);/* 84 */
-int oid_rt_get_small_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_large_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_tx_retry_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_rx_retry_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_rx_total_packet_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv *poid_par_priv);
-
-int oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv *poid_par_priv);/* 8a */
-int oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv *poid_par_priv);	/* 8b */
-
-int oid_rt_get_rx_icv_err_hdl(struct oid_par_priv *poid_par_priv);/* 93 */
-int oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_ap_ip_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_channelplan_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_set_channelplan_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_set_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_set_bcn_intvl_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_dedicate_probe_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_current_tx_power_level_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_channel_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_key_mismatch_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_supported_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_channel_list_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_scan_in_progress_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_forced_data_rate_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv *poid_par_priv);
-
-/*   oid_rtl_seg_01_03 section start ************** */
-int oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv *priv);
-int oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_ap_supported_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_ap_set_passphrase_hdl(struct oid_par_priv *poid_par_priv);
-
-/*  oid_rtl_seg_01_11 */
-int oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv *poid_par_priv);
-
-/*   oid_rtl_seg_03_00 section start ************** */
-int oid_rt_get_connect_state_hdl(struct oid_par_priv *poid_par_priv);
-int oid_rt_set_default_key_id_hdl(struct oid_par_priv *poid_par_priv);
-
-#endif
-- 
2.18.0


             reply	other threads:[~2018-06-30 15:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-30 14:59 Michael Straube [this message]
2018-07-01  9:14 ` [PATCH] staging: rtl8188eu: remove rtw_ioctl_rtl.h Andy Shevchenko
2018-07-01 10:47   ` Michael Straube

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180630145941.13118-1-straube.linux@gmail.com \
    --to=straube.linux@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox