[PATCH] hwmon: Mark expected switch fall-throughs

[PATCH] hwmon: Mark expected switch fall-throughs

[Gustavo A. R. Silva]

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
 drivers/hwmon/emc1403.c | 2 ++
 drivers/hwmon/nct6775.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index 1ea7ca5..aaebeb7 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -443,8 +443,10 @@ static int emc1403_probe(struct i2c_client *client,
 	switch (id->driver_data) {
 	case emc1404:
 		data->groups[2] = &emc1404_group;
+		/* fall through */
 	case emc1403:
 		data->groups[1] = &emc1403_group;
+		/* fall through */
 	case emc1402:
 		data->groups[0] = &emc1402_group;
 	}
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 3714990..c6bd61e 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -2541,7 +2541,7 @@ static void pwm_update_registers(struct nct6775_data *data, int nr)
 	case thermal_cruise:
 		nct6775_write_value(data, data->REG_TARGET[nr],
 				    data->target_temp[nr]);
-		/* intentional */
+		/* fall through  */
 	default:
 		reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
 		reg = (reg & ~data->tolerance_mask) |
-- 
2.7.4

Re: [PATCH] hwmon: Mark expected switch fall-throughs

[Jean Delvare]

Hi Gustavo,

On Mon, 2 Jul 2018 16:30:17 -0500, Gustavo A. R. Silva wrote:
> In preparation to enabling -Wimplicit-fallthrough, mark switch cases
> where we are expecting to fall through.

That's a great initiative, thanks for doing that.

> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
> ---
>  drivers/hwmon/emc1403.c | 2 ++
>  drivers/hwmon/nct6775.c | 2 +-
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
> index 1ea7ca5..aaebeb7 100644
> --- a/drivers/hwmon/emc1403.c
> +++ b/drivers/hwmon/emc1403.c
> @@ -443,8 +443,10 @@ static int emc1403_probe(struct i2c_client *client,
>  	switch (id->driver_data) {
>  	case emc1404:
>  		data->groups[2] = &emc1404_group;
> +		/* fall through */
>  	case emc1403:
>  		data->groups[1] = &emc1403_group;
> +		/* fall through */
>  	case emc1402:
>  		data->groups[0] = &emc1402_group;
>  	}
> diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
> index 3714990..c6bd61e 100644
> --- a/drivers/hwmon/nct6775.c
> +++ b/drivers/hwmon/nct6775.c
> @@ -2541,7 +2541,7 @@ static void pwm_update_registers(struct nct6775_data *data, int nr)
>  	case thermal_cruise:
>  		nct6775_write_value(data, data->REG_TARGET[nr],
>  				    data->target_temp[nr]);
> -		/* intentional */
> +		/* fall through  */

Do you know which -Wimplicit-fallthrough level we will be using? Level
1 would be happy with the initial comment, no change would be needed.
If level 2-4 then yes the change is needed.

>  	default:
>  		reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
>  		reg = (reg & ~data->tolerance_mask) |

Reviewed-by: Jean Delvare <jdelvare@suse.de>

-- 
Jean Delvare
SUSE L3 Support

Re: hwmon: Mark expected switch fall-throughs

[Guenter Roeck]

On Mon, Jul 02, 2018 at 04:30:17PM -0500, Gustavo A. R. Silva wrote:
> In preparation to enabling -Wimplicit-fallthrough, mark switch cases
> where we are expecting to fall through.
> 
> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
> Reviewed-by: Jean Delvare <jdelvare@suse.de>

Applied to hwmon-next.

Thanks,
Guenter

Re: [PATCH] hwmon: Mark expected switch fall-throughs

[Gustavo A. R. Silva]

Hi Jean,

On 07/03/2018 02:51 AM, Jean Delvare wrote:
> Hi Gustavo,
> 
> On Mon, 2 Jul 2018 16:30:17 -0500, Gustavo A. R. Silva wrote:
>> In preparation to enabling -Wimplicit-fallthrough, mark switch cases
>> where we are expecting to fall through.
> 
> That's a great initiative, thanks for doing that.
> 

Glad to help. :)

>> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
>> ---
>>  drivers/hwmon/emc1403.c | 2 ++
>>  drivers/hwmon/nct6775.c | 2 +-
>>  2 files changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
>> index 1ea7ca5..aaebeb7 100644
>> --- a/drivers/hwmon/emc1403.c
>> +++ b/drivers/hwmon/emc1403.c
>> @@ -443,8 +443,10 @@ static int emc1403_probe(struct i2c_client *client,
>>  	switch (id->driver_data) {
>>  	case emc1404:
>>  		data->groups[2] = &emc1404_group;
>> +		/* fall through */
>>  	case emc1403:
>>  		data->groups[1] = &emc1403_group;
>> +		/* fall through */
>>  	case emc1402:
>>  		data->groups[0] = &emc1402_group;
>>  	}
>> diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
>> index 3714990..c6bd61e 100644
>> --- a/drivers/hwmon/nct6775.c
>> +++ b/drivers/hwmon/nct6775.c
>> @@ -2541,7 +2541,7 @@ static void pwm_update_registers(struct nct6775_data *data, int nr)
>>  	case thermal_cruise:
>>  		nct6775_write_value(data, data->REG_TARGET[nr],
>>  				    data->target_temp[nr]);
>> -		/* intentional */
>> +		/* fall through  */
> 
> Do you know which -Wimplicit-fallthrough level we will be using? Level
> 1 would be happy with the initial comment, no change would be needed.
> If level 2-4 then yes the change is needed.
> 

We are trying level 2, so we can perfectly use annotations like this one (else: fall through):

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=9b10000f4921e9f9f8231f9ceecae4446928844a

>>  	default:
>>  		reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
>>  		reg = (reg & ~data->tolerance_mask) |
> 
> Reviewed-by: Jean Delvare <jdelvare@suse.de>
> 

Thanks
--
Gustavo