Re: [PATCH] hwmon: Mark expected switch fall-throughs

[Jean Delvare <jdelvare@suse.de>]

Hi Gustavo,

On Mon, 2 Jul 2018 16:30:17 -0500, Gustavo A. R. Silva wrote:
> In preparation to enabling -Wimplicit-fallthrough, mark switch cases
> where we are expecting to fall through.

That's a great initiative, thanks for doing that.

> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
> ---
>  drivers/hwmon/emc1403.c | 2 ++
>  drivers/hwmon/nct6775.c | 2 +-
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
> index 1ea7ca5..aaebeb7 100644
> --- a/drivers/hwmon/emc1403.c
> +++ b/drivers/hwmon/emc1403.c
> @@ -443,8 +443,10 @@ static int emc1403_probe(struct i2c_client *client,
>  	switch (id->driver_data) {
>  	case emc1404:
>  		data->groups[2] = &emc1404_group;
> +		/* fall through */
>  	case emc1403:
>  		data->groups[1] = &emc1403_group;
> +		/* fall through */
>  	case emc1402:
>  		data->groups[0] = &emc1402_group;
>  	}
> diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
> index 3714990..c6bd61e 100644
> --- a/drivers/hwmon/nct6775.c
> +++ b/drivers/hwmon/nct6775.c
> @@ -2541,7 +2541,7 @@ static void pwm_update_registers(struct nct6775_data *data, int nr)
>  	case thermal_cruise:
>  		nct6775_write_value(data, data->REG_TARGET[nr],
>  				    data->target_temp[nr]);
> -		/* intentional */
> +		/* fall through  */

Do you know which -Wimplicit-fallthrough level we will be using? Level
1 would be happy with the initial comment, no change would be needed.
If level 2-4 then yes the change is needed.

>  	default:
>  		reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
>  		reg = (reg & ~data->tolerance_mask) |

Reviewed-by: Jean Delvare <jdelvare@suse.de>

-- 
Jean Delvare
SUSE L3 Support