Re: [PATCH v3] mfd: arizona: Don't use regmap_read_poll_timeout

[Lee Jones <lee.jones@linaro.org>]

On Thu, 28 Jun 2018, Charles Keepax wrote:

> Some Arizona CODECs have a small timing window where they will
> NAK an I2C transaction if it happens before the boot done bit is
> set. This can cause the read of the register containing the boot
> done bit to fail until it is set. Since regmap_read_poll_timeout
> will abort polling if a read fails it can't be reliably used to
> poll the boot done bit over I2C.
> 
> Do a partial revert of ef84f885e037 ("mfd: arizona: Refactor
> arizona_poll_reg"), removing the regmap_read_poll_timeout but
> leaving the refactoring to make the arizona_poll_reg take more
> sensible arguments.
> 
> Fixes: ef84f885e037 ("mfd: arizona: Refactor arizona_poll_reg")
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
> 
> Changes since v2:
>  - Refactor to remove initialisation of ret variable
> 
> Thanks,
> Charles
> 
>  drivers/mfd/arizona-core.c | 34 ++++++++++++++++++++++++++--------
>  1 file changed, 26 insertions(+), 8 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog