[PATCH v2 0/3] arm: dts: zynq: improvements and cleanup

Luis Araneda
2018-07-06T06:05:24Z

This series attempts to standardize device naming and improve
its information for better identification

The values of the "compatible" and "model" device-tree properties
are corrected for some devices, adding complementary information
when necessary

Changes since v1 (RFC):
- Add values to compatible property instead of replacing them
- Don't remove "internal" word from Xilinx boards on dt-bindings
- Migrate content of adapteva dt-binding file into Xilinx's
- Sort additional compatible strings alphabetically
by manufacturer
- Dropped patch that renamed the zedboard development board
(no apparent benefit)
- Dropped the patch that removed the "zynq" value from the
compatible strings (breaks the ABI)

Luis Araneda (3):
arm: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed
boards
dt-bindings: xilinx: Add missing zynq boards and sort entries
arm: dts: zynq: correct and improve the model property of dt files

.../devicetree/bindings/arm/adapteva.txt | 7 -----
.../devicetree/bindings/arm/xilinx.txt | 30 +++++++++++++++----
arch/arm/boot/dts/zynq-cc108.dts | 2 +-
arch/arm/boot/dts/zynq-microzed.dts | 4 +--
arch/arm/boot/dts/zynq-parallella.dts | 2 +-
arch/arm/boot/dts/zynq-zc702.dts | 2 +-
arch/arm/boot/dts/zynq-zc706.dts | 2 +-
arch/arm/boot/dts/zynq-zc770-xm010.dts | 2 +-
arch/arm/boot/dts/zynq-zc770-xm011.dts | 2 +-
arch/arm/boot/dts/zynq-zc770-xm012.dts | 2 +-
arch/arm/boot/dts/zynq-zc770-xm013.dts | 2 +-
arch/arm/boot/dts/zynq-zed.dts | 4 +--
arch/arm/boot/dts/zynq-zybo-z7.dts | 2 +-
arch/arm/boot/dts/zynq-zybo.dts | 2 +-
14 files changed, 39 insertions(+), 26 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt

--
2.18.0