* [PATCH v2 1/8] staging:rtl8192u: Remove blank lines before '}' and after '{' characters
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
2018-07-10 15:05 ` [PATCH v2 2/8] staging:rtl8192u: Correct indentation and spacing for braces of code blocks John Whitmore
` (6 subsequent siblings)
7 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
Coding style change to simply remove the unrequired blanks lines before a
closing brace or after an opening brace.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/ieee80211_softmac.c | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 553e4aff235c..b971c404f152 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -78,7 +78,6 @@ static void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p)
u8 *tag = *tag_p;
if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
-
*tag++ = MFIE_TYPE_RATES_EX;
*tag++ = 8;
*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
@@ -89,7 +88,6 @@ static void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p)
*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
-
}
/* We may add an option for custom rates that specific HW might support */
@@ -301,7 +299,6 @@ softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)
netif_trans_update(ieee->dev);
ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
}else{
-
header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
if (ieee->seq_ctrl[0] == 0xFFF)
@@ -1473,7 +1470,6 @@ void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee)
spin_lock_irqsave(&ieee->lock, flags);
list_for_each_entry(target, &ieee->network_list, list) {
-
/* if the state become different that NOLINK means
* we had found what we are searching for
*/
@@ -1573,7 +1569,6 @@ static int assoc_rq_parse(struct sk_buff *skb, u8 *dest)
if (skb->len < (sizeof(struct ieee80211_assoc_request_frame) -
sizeof(struct ieee80211_info_element))) {
-
IEEE80211_DEBUG_MGMT("invalid len in auth request:%d \n", skb->len);
return -1;
}
@@ -1640,7 +1635,6 @@ ieee80211_rx_auth_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
ieee80211_resp_to_auth(ieee, status, dest);
}
//DMESG("Dest is "MACSTR, MAC2STR(dest));
-
}
static inline void
@@ -1665,7 +1659,6 @@ static void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee,
if (buf)
softmac_ps_mgmt_xmit(buf, ieee);
-
}
/* EXPORT_SYMBOL(ieee80211_sta_ps_send_null_frame); */
@@ -1728,7 +1721,6 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
if ((ieee->ps == IEEE80211_PS_DISABLED ||
ieee->iw_mode != IW_MODE_INFRA ||
ieee->state != IEEE80211_LINKED)){
-
// #warning CHECK_LOCK_HERE
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
@@ -2000,7 +1992,6 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) {
if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING
&& ieee->iw_mode == IW_MODE_INFRA) {
-
IEEE80211_DEBUG_MGMT("Received auth response");
ieee80211_check_auth_response(ieee, skb);
} else if (ieee->iw_mode == IW_MODE_MASTER) {
@@ -2026,7 +2017,6 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
ieee->state == IEEE80211_LINKED &&
ieee->iw_mode == IW_MODE_INFRA){
-
ieee->state = IEEE80211_ASSOCIATING;
ieee->softmac_stats.reassoc++;
@@ -2117,7 +2107,6 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
//exit:
spin_unlock_irqrestore(&ieee->lock, flags);
-
}
EXPORT_SYMBOL(ieee80211_softmac_xmit);
@@ -2126,12 +2115,10 @@ static void ieee80211_resume_tx(struct ieee80211_device *ieee)
{
int i;
for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) {
-
if (ieee->queue_stop){
ieee->tx_pending.frag = i;
return;
}else{
-
ieee->softmac_data_hard_start_xmit(
ieee->tx_pending.txb->fragments[i],
ieee->dev, ieee->rate);
@@ -2173,7 +2160,6 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee)
if (ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE) {
while (!ieee->queue_stop && (skb = dequeue_mgmt(ieee))){
-
header = (struct rtl_80211_hdr_3addr *)skb->data;
header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
@@ -2243,7 +2229,6 @@ void ieee80211_start_master_bss(struct ieee80211_device *ieee)
static void ieee80211_start_monitor_mode(struct ieee80211_device *ieee)
{
if (ieee->raw_tx) {
-
if (ieee->data_hard_resume)
ieee->data_hard_resume(ieee->dev);
@@ -2303,7 +2288,6 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)
eth_random_addr(ieee->current_network.bssid);
if (ieee->modulation & IEEE80211_CCK_MODULATION){
-
ieee->current_network.rates_len = 4;
ieee->current_network.rates[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
@@ -2338,7 +2322,6 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)
ieee->current_network.capability = WLAN_CAPABILITY_IBSS;
if (ieee->short_slot)
ieee->current_network.capability |= WLAN_CAPABILITY_SHORT_SLOT;
-
}
ieee->state = IEEE80211_LINKED;
@@ -3054,7 +3037,6 @@ int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_poin
}
switch (param->cmd) {
-
case IEEE_CMD_SET_WPA_PARAM:
ret = ieee80211_wpa_set_param(ieee, param->u.wpa_param.name,
param->u.wpa_param.value);
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 2/8] staging:rtl8192u: Correct indentation and spacing for braces of code blocks
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
2018-07-10 15:05 ` [PATCH v2 1/8] staging:rtl8192u: Remove blank lines before '}' and after '{' characters John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
2018-07-10 15:05 ` [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style John Whitmore
` (5 subsequent siblings)
7 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
Simple style change to fix the indentaiton and spacing of the braces around
multiline code blocks.
Braces removed from code block with a single line.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/ieee80211_softmac.c | 254 ++++++++----------
1 file changed, 107 insertions(+), 147 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index b971c404f152..16500a7e7b4e 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -107,11 +107,10 @@ static void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p)
*tag++ = 0x00;
*tag++ = 0x01;
#ifdef SUPPORT_USPD
- if (ieee->current_network.wmm_info & 0x80) {
+ if (ieee->current_network.wmm_info & 0x80)
*tag++ = 0x0f | MAX_SP_Len;
- } else {
+ else
*tag++ = MAX_SP_Len;
- }
#else
*tag++ = MAX_SP_Len;
#endif
@@ -200,8 +199,7 @@ static u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)
/*
// Data rate of ProbeReq is already decided. Annie, 2005-03-31
- if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
- {
+ if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) ) {
if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
rate = 0x0c;
else
@@ -233,10 +231,10 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
tcb_desc->bTxDisableRateFallBack = 1;
tcb_desc->bTxUseDriverAssingedRate = 1;
- if (single){
- if (ieee->queue_stop){
+ if (single) {
+ if (ieee->queue_stop) {
enqueue_mgmt(ieee, skb);
- }else{
+ } else {
header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
if (ieee->seq_ctrl[0] == 0xFFF)
@@ -251,7 +249,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
}
spin_unlock_irqrestore(&ieee->lock, flags);
- }else{
+ } else {
spin_unlock_irqrestore(&ieee->lock, flags);
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags);
@@ -287,7 +285,7 @@ softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)
struct rtl_80211_hdr_3addr *header =
(struct rtl_80211_hdr_3addr *)skb->data;
- if (single){
+ if (single) {
header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
if (ieee->seq_ctrl[0] == 0xFFF)
@@ -298,7 +296,7 @@ softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee)
/* avoid watchdog triggers */
netif_trans_update(ieee->dev);
ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
- }else{
+ } else {
header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
if (ieee->seq_ctrl[0] == 0xFFF)
@@ -420,13 +418,12 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER + 1);
mutex_lock(&ieee->scan_mutex);
- while (1)
- {
- do{
+ while (1) {
+ do {
ch++;
if (ch > MAX_CHANNEL_NUMBER)
goto out; /* scan completed */
- }while (!channel_map[ch]);
+ } while (!channel_map[ch]);
/* this function can be called in two situations
* 1- We have switched to ad-hoc mode and we are
@@ -462,16 +459,15 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
msleep_interruptible(IEEE80211_SOFTMAC_SCAN_TIME);
}
out:
- if (ieee->state < IEEE80211_LINKED){
+ if (ieee->state < IEEE80211_LINKED) {
ieee->actscanning = false;
mutex_unlock(&ieee->scan_mutex);
+ } else {
+ ieee->sync_scan_hurryup = 0;
+ if (IS_DOT11D_ENABLE(ieee))
+ DOT11D_ScanComplete(ieee);
+ mutex_unlock(&ieee->scan_mutex);
}
- else{
- ieee->sync_scan_hurryup = 0;
- if (IS_DOT11D_ENABLE(ieee))
- DOT11D_ScanComplete(ieee);
- mutex_unlock(&ieee->scan_mutex);
-}
}
EXPORT_SYMBOL(ieee80211_softmac_scan_syncro);
@@ -486,18 +482,17 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work)
if (!ieee->ieee_up)
return;
mutex_lock(&ieee->scan_mutex);
- do{
+ do {
ieee->current_network.channel =
(ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
- if (watchdog++ > MAX_CHANNEL_NUMBER)
- {
+ if (watchdog++ > MAX_CHANNEL_NUMBER) {
//if current channel is not in channel map, set to default channel.
if (!channel_map[ieee->current_network.channel]) {
ieee->current_network.channel = 6;
goto out; /* no good chans */
}
}
- }while (!channel_map[ieee->current_network.channel]);
+ } while (!channel_map[ieee->current_network.channel]);
if (ieee->scanning == 0 )
goto out;
ieee->set_chan(ieee->dev, ieee->current_network.channel);
@@ -589,31 +584,26 @@ EXPORT_SYMBOL(ieee80211_stop_scan);
/* called with ieee->lock held */
static void ieee80211_start_scan(struct ieee80211_device *ieee)
{
- if (IS_DOT11D_ENABLE(ieee) )
- {
+ if (IS_DOT11D_ENABLE(ieee) ) {
if (IS_COUNTRY_IE_VALID(ieee))
- {
RESET_CIE_WATCHDOG(ieee);
- }
}
- if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
+ if (ieee->softmac_features & IEEE_SOFTMAC_SCAN) {
if (ieee->scanning == 0) {
ieee->scanning = 1;
schedule_delayed_work(&ieee->softmac_scan_wq, 0);
}
- }else
+ } else {
ieee->start_scan(ieee->dev);
+ }
}
/* called with wx_mutex held */
void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
{
- if (IS_DOT11D_ENABLE(ieee) )
- {
+ if (IS_DOT11D_ENABLE(ieee) ) {
if (IS_COUNTRY_IE_VALID(ieee))
- {
RESET_CIE_WATCHDOG(ieee);
- }
}
ieee->sync_scan_hurryup = 0;
if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
@@ -714,8 +704,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
HTConstructCapabilityElement(ieee, tmp_ht_cap_buf, &tmp_ht_cap_len, encrypt);
HTConstructInfoElement(ieee, tmp_ht_info_buf, &tmp_ht_info_len, encrypt);
- if (pHTInfo->bRegRT2RTAggregation)
- {
+ if (pHTInfo->bRegRT2RTAggregation) {
tmp_generic_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer;
tmp_generic_ie_len = sizeof(ieee->pHTInfo->szRT2RTAggBuffer);
HTConstructRT2RTAggElement(ieee, tmp_generic_ie_buf, &tmp_generic_ie_len);
@@ -798,10 +787,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
tag += rate_ex_len - 2;
}
- if (wpa_ie_len)
- {
- if (ieee->iw_mode == IW_MODE_ADHOC)
- {//as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. WB 2008.07.07
+ if (wpa_ie_len) {
+ if (ieee->iw_mode == IW_MODE_ADHOC) {
+ //as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. WB 2008.07.07
memcpy(&ieee->wpa_ie[14], &ieee->wpa_ie[8], 4);
}
memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
@@ -979,30 +967,25 @@ ieee80211_association_req(struct ieee80211_network *beacon,
encrypt = ieee->host_encrypt && crypt && crypt->ops && ((0 == strcmp(crypt->ops->name, "WEP") || wpa_ie_len));
/* Include High Throuput capability && Realtek proprietary */
- if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT)
- {
+ if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {
ht_cap_buf = (u8 *)&(ieee->pHTInfo->SelfHTCap);
ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
HTConstructCapabilityElement(ieee, ht_cap_buf, &ht_cap_len, encrypt);
- if (ieee->pHTInfo->bCurrentRT2RTAggregation)
- {
+ if (ieee->pHTInfo->bCurrentRT2RTAggregation) {
realtek_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer;
realtek_ie_len = sizeof( ieee->pHTInfo->szRT2RTAggBuffer);
HTConstructRT2RTAggElement(ieee, realtek_ie_buf, &realtek_ie_len);
}
}
- if (ieee->qos_support) {
+ if (ieee->qos_support)
wmm_info_len = beacon->qos_data.supported ? 9 : 0;
- }
if (beacon->bCkipSupported)
- {
ckip_ie_len = 30 + 2;
- }
+
if (beacon->bCcxRmEnable)
- {
ccxrm_ie_len = 6 + 2;
- }
+
if (beacon->BssCcxVerNumber >= 2)
cxvernum_ie_len = 5 + 2;
@@ -1098,8 +1081,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
tag += osCcxAironetIE.Length;
}
- if (beacon->bCcxRmEnable)
- {
+ if (beacon->bCcxRmEnable) {
static u8 CcxRmCapBuf[] = {0x00, 0x40, 0x96, 0x01, 0x01, 0x00};
OCTET_STRING osCcxRmCap;
@@ -1126,8 +1108,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
}
//HT cap element
if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {
- if (ieee->pHTInfo->ePeerHTSpecVer != HT_SPEC_VER_EWC)
- {
+ if (ieee->pHTInfo->ePeerHTSpecVer != HT_SPEC_VER_EWC) {
tag = skb_put(skb, ht_cap_len);
*tag++ = MFIE_TYPE_HT_CAP;
*tag++ = ht_cap_len - 2;
@@ -1137,9 +1118,8 @@ ieee80211_association_req(struct ieee80211_network *beacon,
}
//choose what wpa_supplicant gives to associate.
- if (wpa_ie_len) {
+ if (wpa_ie_len)
skb_put_data(skb, ieee->wpa_ie, wpa_ie_len);
- }
if (wmm_info_len) {
tag = skb_put(skb, wmm_info_len);
@@ -1153,8 +1133,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
#endif
if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {
- if (ieee->pHTInfo->ePeerHTSpecVer == HT_SPEC_VER_EWC)
- {
+ if (ieee->pHTInfo->ePeerHTSpecVer == HT_SPEC_VER_EWC) {
tag = skb_put(skb, ht_cap_len);
*tag++ = MFIE_TYPE_GENERIC;
*tag++ = ht_cap_len - 2;
@@ -1187,10 +1166,10 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)
* Here we will check if there are good nets to associate
* with, so we retry or just get back to NO_LINK and scanning
*/
- if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING){
+ if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING) {
IEEE80211_DEBUG_MGMT("Authentication failed\n");
ieee->softmac_stats.no_auth_rs++;
- }else{
+ } else {
IEEE80211_DEBUG_MGMT("Association failed\n");
ieee->softmac_stats.no_ass_rs++;
}
@@ -1220,9 +1199,9 @@ static void ieee80211_associate_step1(struct ieee80211_device *ieee)
ieee->softmac_stats.tx_auth_rq++;
skb = ieee80211_authentication_req(beacon, ieee, 0);
- if (!skb)
+ if (!skb) {
ieee80211_associate_abort(ieee);
- else{
+ } else {
ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING ;
IEEE80211_DEBUG_MGMT("Sending authentication request\n");
softmac_mgmt_xmit(skb, ieee);
@@ -1248,9 +1227,9 @@ static void ieee80211_auth_challenge(struct ieee80211_device *ieee,
ieee->softmac_stats.tx_auth_rq++;
skb = ieee80211_authentication_req(beacon, ieee, chlen + 2);
- if (!skb)
+ if (!skb) {
ieee80211_associate_abort(ieee);
- else{
+ } else {
c = skb_put(skb, chlen + 2);
*(c++) = MFIE_TYPE_CHALLENGE;
*(c++) = chlen;
@@ -1278,9 +1257,9 @@ static void ieee80211_associate_step2(struct ieee80211_device *ieee)
ieee->softmac_stats.tx_ass_rq++;
skb = ieee80211_association_req(beacon, ieee);
- if (!skb)
+ if (!skb) {
ieee80211_associate_abort(ieee);
- else{
+ } else {
softmac_mgmt_xmit(skb, ieee);
mod_timer(&ieee->associate_timer, jiffies + (HZ / 2));
//dev_kfree_skb_any(skb);//edit by thomas
@@ -1291,28 +1270,24 @@ static void ieee80211_associate_complete_wq(struct work_struct *work)
struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);
printk(KERN_INFO "Associated successfully\n");
if (ieee80211_is_54g(&ieee->current_network) &&
- (ieee->modulation & IEEE80211_OFDM_MODULATION)){
+ (ieee->modulation & IEEE80211_OFDM_MODULATION)) {
ieee->rate = 108;
printk(KERN_INFO"Using G rates:%d\n", ieee->rate);
- }else{
+ } else {
ieee->rate = 22;
printk(KERN_INFO"Using B rates:%d\n", ieee->rate);
}
- if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT)
- {
+ if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {
printk("Successfully associated, ht enabled\n");
HTOnAssocRsp(ieee);
- }
- else
- {
+ } else {
printk("Successfully associated, ht not enabled(%d, %d)\n", ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bEnableHT);
memset(ieee->dot11HTOperationalRateSet, 0, 16);
//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
}
ieee->LinkDetectInfo.SlotNum = 2 * (1 + ieee->current_network.beacon_interval / 500);
// To prevent the immediately calling watch_dog after association.
- if (ieee->LinkDetectInfo.NumRecvBcnInPeriod == 0 || ieee->LinkDetectInfo.NumRecvDataInPeriod == 0 )
- {
+ if (ieee->LinkDetectInfo.NumRecvBcnInPeriod == 0 || ieee->LinkDetectInfo.NumRecvDataInPeriod == 0 ) {
ieee->LinkDetectInfo.NumRecvBcnInPeriod = 1;
ieee->LinkDetectInfo.NumRecvDataInPeriod = 1;
}
@@ -1403,7 +1378,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
* and the network does broadcast and that those two bssid matches
*/
(!apset && ssidset && ssidbroad && ssidmatch)
- ){
+ ) {
/* if the essid is hidden replace it with the
* essid provided by the user.
*/
@@ -1424,32 +1399,29 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
//ieee->pHTInfo->IOTAction = 0;
HTResetIOTSetting(ieee->pHTInfo);
- if (ieee->iw_mode == IW_MODE_INFRA){
+ if (ieee->iw_mode == IW_MODE_INFRA) {
/* Join the network for the first time */
ieee->AsocRetryCount = 0;
//for HT by amy 080514
if ((ieee->current_network.qos_data.supported == 1) &&
- // (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT))
- ieee->current_network.bssht.bdSupportHT)
+ // (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT))
+ ieee->current_network.bssht.bdSupportHT) {
/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/
- {
// ieee->pHTInfo->bCurrentHTSupport = true;
HTResetSelfAndSavePeerSetting(ieee, &(ieee->current_network));
- }
- else
- {
+ } else {
ieee->pHTInfo->bCurrentHTSupport = false;
}
ieee->state = IEEE80211_ASSOCIATING;
schedule_work(&ieee->associate_procedure_wq);
- }else{
+ } else {
if (ieee80211_is_54g(&ieee->current_network) &&
- (ieee->modulation & IEEE80211_OFDM_MODULATION)){
+ (ieee->modulation & IEEE80211_OFDM_MODULATION)) {
ieee->rate = 108;
ieee->SetWirelessMode(ieee->dev, IEEE_G);
printk(KERN_INFO"Using G rates\n");
- }else{
+ } else {
ieee->rate = 22;
ieee->SetWirelessMode(ieee->dev, IEEE_B);
printk(KERN_INFO"Using B rates\n");
@@ -1545,7 +1517,7 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,
tag = skb->data + sizeof (struct rtl_80211_hdr_3addr );
- while (tag + 1 < skbend){
+ while (tag + 1 < skbend) {
if (*tag == 0) {
ssid = tag + 2;
ssidlen = *(tag + 1);
@@ -1600,7 +1572,7 @@ static inline u16 assoc_parse(struct ieee80211_device *ieee, struct sk_buff *skb
(ieee->current_network.mode == IEEE_N_24G) &&
(ieee->AsocRetryCount++ < (RT_ASOC_RETRY_LIMIT - 1)))) {
ieee->pHTInfo->IOTAction |= HT_IOT_ACT_PURE_N_MODE;
- }else {
+ } else {
ieee->AsocRetryCount = 0;
}
@@ -1631,9 +1603,8 @@ ieee80211_rx_auth_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
ieee->softmac_stats.rx_auth_rq++;
status = auth_rq_parse(skb, dest);
- if (status != -1) {
+ if (status != -1)
ieee80211_resp_to_auth(ieee, status, dest);
- }
//DMESG("Dest is "MACSTR, MAC2STR(dest));
}
@@ -1644,9 +1615,8 @@ ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
//unsigned long flags;
ieee->softmac_stats.rx_ass_rq++;
- if (assoc_rq_parse(skb, dest) != -1) {
+ if (assoc_rq_parse(skb, dest) != -1)
ieee80211_resp_to_assoc_rq(ieee, dest);
- }
printk(KERN_INFO"New client associated: %pM\n", dest);
//FIXME
@@ -1720,7 +1690,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
if ((ieee->ps == IEEE80211_PS_DISABLED ||
ieee->iw_mode != IW_MODE_INFRA ||
- ieee->state != IEEE80211_LINKED)){
+ ieee->state != IEEE80211_LINKED)) {
// #warning CHECK_LOCK_HERE
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
@@ -1734,15 +1704,14 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
if (sleep == 0)
goto out;
- if (sleep == 1){
- if (ieee->sta_sleep == 1)
+ if (sleep == 1) {
+ if (ieee->sta_sleep == 1) {
ieee->enter_sleep_state(ieee->dev, th, tl);
-
- else if (ieee->sta_sleep == 0){
+ } else if (ieee->sta_sleep == 0) {
// printk("send null 1\n");
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
- if (ieee->ps_is_queue_empty(ieee->dev)){
+ if (ieee->ps_is_queue_empty(ieee->dev)) {
ieee->sta_sleep = 2;
ieee->ps_request_tx_ack(ieee->dev);
@@ -1754,7 +1723,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
}
spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
}
- }else if (sleep == 2){
+ } else if (sleep == 2) {
//#warning CHECK_LOCK_HERE
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
@@ -1794,7 +1763,7 @@ void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)
spin_lock_irqsave(&ieee->lock, flags);
- if (ieee->sta_sleep == 2){
+ if (ieee->sta_sleep == 2) {
/* Null frame with PS bit set */
if (success) {
ieee->sta_sleep = 1;
@@ -1803,9 +1772,8 @@ void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)
/* if the card report not success we can't be sure the AP
* has not RXed so we can't assume the AP believe us awake
*/
- }
- /* 21112005 - tx again null without PS bit if lost */
- else {
+ } else {
+ /* 21112005 - tx again null without PS bit if lost */
if ((ieee->sta_sleep == 0) && !success) {
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
ieee80211_sta_ps_send_null_frame(ieee, 0);
@@ -1823,8 +1791,7 @@ static void ieee80211_process_action(struct ieee80211_device *ieee,
u8 *act = ieee80211_get_payload(header);
u8 tmp = 0;
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
- if (act == NULL)
- {
+ if (act == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "error to get payload of action frame\n");
return;
}
@@ -1890,9 +1857,9 @@ static void ieee80211_check_auth_response(struct ieee80211_device *ieee,
bHalfSupportNmode) {
netdev_dbg(ieee->dev, "enter half N mode\n");
ieee->bHalfWirelessN24GMode = true;
- } else
+ } else {
ieee->bHalfWirelessN24GMode = false;
-
+ }
ieee80211_associate_step2(ieee);
} else {
ieee80211_auth_challenge(ieee, challenge, chlen);
@@ -1933,8 +1900,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
IEEE80211_DEBUG_MGMT("received [RE]ASSOCIATION RESPONSE (%d)\n",
WLAN_FC_GET_STYPE(header->frame_ctl));
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
- ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATED &&
- ieee->iw_mode == IW_MODE_INFRA){
+ ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATED &&
+ ieee->iw_mode == IW_MODE_INFRA) {
struct ieee80211_network network_resp;
struct ieee80211_network *network = &network_resp;
@@ -1950,11 +1917,10 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
memset(network, 0, sizeof(*network));
if (ieee80211_parse_info_param(ieee, assoc_resp->info_element,\
rx_stats->len - sizeof(*assoc_resp),\
- network, rx_stats)){
+ network, rx_stats)) {
return 1;
- }
- else
- { //filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
+ } else {
+ //filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
}
@@ -1971,11 +1937,10 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
IEEE80211_DEBUG_MGMT(
"Association response status code 0x%x\n",
errcode);
- if (ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT) {
+ if (ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT)
schedule_work(&ieee->associate_procedure_wq);
- } else {
+ else
ieee80211_associate_abort(ieee);
- }
}
}
break;
@@ -2004,7 +1969,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
((ieee->iw_mode == IW_MODE_ADHOC ||
ieee->iw_mode == IW_MODE_MASTER) &&
- ieee->state == IEEE80211_LINKED)){
+ ieee->state == IEEE80211_LINKED)) {
ieee80211_rx_probe_rq(ieee, skb);
}
break;
@@ -2016,7 +1981,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
*/
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
ieee->state == IEEE80211_LINKED &&
- ieee->iw_mode == IW_MODE_INFRA){
+ ieee->iw_mode == IW_MODE_INFRA) {
ieee->state = IEEE80211_ASSOCIATING;
ieee->softmac_stats.reassoc++;
@@ -2071,9 +2036,9 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
ieee->stats.tx_bytes += le16_to_cpu(txb->payload_size);
ieee->stats.tx_packets++;
tcb_desc = (struct cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE);
- if (tcb_desc->bMulticast) {
+ if (tcb_desc->bMulticast)
ieee->stats.multicast++;
- }
+
/* if xmit available, just xmit it immediately, else just insert it to the wait queue */
for (i = 0; i < txb->nr_frags; i++) {
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
@@ -2094,7 +2059,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
#else
skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]);
#endif
- }else{
+ } else {
ieee->softmac_data_hard_start_xmit(
txb->fragments[i],
ieee->dev, ieee->rate);
@@ -2115,10 +2080,10 @@ static void ieee80211_resume_tx(struct ieee80211_device *ieee)
{
int i;
for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) {
- if (ieee->queue_stop){
+ if (ieee->queue_stop) {
ieee->tx_pending.frag = i;
return;
- }else{
+ } else {
ieee->softmac_data_hard_start_xmit(
ieee->tx_pending.txb->fragments[i],
ieee->dev, ieee->rate);
@@ -2159,7 +2124,7 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee)
ieee->queue_stop = 0;
if (ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE) {
- while (!ieee->queue_stop && (skb = dequeue_mgmt(ieee))){
+ while (!ieee->queue_stop && (skb = dequeue_mgmt(ieee))) {
header = (struct rtl_80211_hdr_3addr *)skb->data;
header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
@@ -2287,17 +2252,17 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)
if (!ieee->wap_set)
eth_random_addr(ieee->current_network.bssid);
- if (ieee->modulation & IEEE80211_CCK_MODULATION){
+ if (ieee->modulation & IEEE80211_CCK_MODULATION) {
ieee->current_network.rates_len = 4;
ieee->current_network.rates[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
ieee->current_network.rates[1] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
ieee->current_network.rates[2] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
ieee->current_network.rates[3] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
- }else
+ } else {
ieee->current_network.rates_len = 0;
-
- if (ieee->modulation & IEEE80211_OFDM_MODULATION){
+ }
+ if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
ieee->current_network.rates_ex_len = 8;
ieee->current_network.rates_ex[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
@@ -2310,7 +2275,7 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)
ieee->current_network.rates_ex[7] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
ieee->rate = 108;
- }else{
+ } else {
ieee->current_network.rates_ex_len = 0;
ieee->rate = 22;
}
@@ -2353,12 +2318,9 @@ void ieee80211_start_bss(struct ieee80211_device *ieee)
// Ref: 802.11d 11.1.3.3
// STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
//
- if (IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee))
- {
+ if (IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee)) {
if (! ieee->bGlobalDomain)
- {
return;
- }
}
/* check if we have already found the net we
* are interested in (if any).
@@ -2528,11 +2490,11 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)
ieee->proto_started = 1;
if (ieee->current_network.channel == 0) {
- do{
+ do {
ch++;
if (ch > MAX_CHANNEL_NUMBER)
return; /* no channel found */
- }while (!GET_DOT11D_INFO(ieee)->channel_map[ch]);
+ } while (!GET_DOT11D_INFO(ieee)->channel_map[ch]);
ieee->current_network.channel = ch;
}
@@ -2575,9 +2537,9 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
ieee->state = IEEE80211_NOLINK;
ieee->sync_scan_hurryup = 0;
- for (i = 0; i < 5; i++) {
- ieee->seq_ctrl[i] = 0;
- }
+ for (i = 0; i < 5; i++)
+ ieee->seq_ctrl[i] = 0;
+
ieee->pDot11dInfo = kzalloc(sizeof(RT_DOT11D_INFO), GFP_KERNEL);
if (!ieee->pDot11dInfo)
IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for DOT11D\n");
@@ -2732,12 +2694,11 @@ static int ieee80211_wpa_set_auth_algs(struct ieee80211_device *ieee, int value)
sec.auth_mode = WLAN_AUTH_SHARED_KEY;
ieee->open_wep = 0;
ieee->auth_mode = 1;
- } else if (value & AUTH_ALG_OPEN_SYSTEM){
+ } else if (value & AUTH_ALG_OPEN_SYSTEM) {
sec.auth_mode = WLAN_AUTH_OPEN;
ieee->open_wep = 1;
ieee->auth_mode = 0;
- }
- else if (value & IW_AUTH_ALG_LEAP){
+ } else if (value & IW_AUTH_ALG_LEAP) {
sec.auth_mode = WLAN_AUTH_LEAP;
ieee->open_wep = 1;
ieee->auth_mode = 2;
@@ -2788,8 +2749,7 @@ static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name, u32 v
if (!value) {
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_0;
- }
- else {
+ } else {
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_1;
}
@@ -2935,9 +2895,9 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
ieee->tx_keyidx = param->u.crypt.idx;
sec.active_key = param->u.crypt.idx;
sec.flags |= SEC_ACTIVE_KEY;
- } else
+ } else {
sec.flags &= ~SEC_ACTIVE_KEY;
-
+ }
memcpy(sec.keys[param->u.crypt.idx],
param->u.crypt.key,
param->u.crypt.key_len);
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
2018-07-10 15:05 ` [PATCH v2 1/8] staging:rtl8192u: Remove blank lines before '}' and after '{' characters John Whitmore
2018-07-10 15:05 ` [PATCH v2 2/8] staging:rtl8192u: Correct indentation and spacing for braces of code blocks John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
2018-07-11 11:13 ` Greg KH
2018-07-10 15:05 ` [PATCH v2 4/8] staging:rtl8192u: Remove prohibited spaces - Coding Style John Whitmore
` (4 subsequent siblings)
7 siblings, 1 reply; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/ieee80211_softmac.c | 78 +++++++++----------
1 file changed, 36 insertions(+), 42 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 16500a7e7b4e..7bec24d0a234 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -263,7 +263,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
/* check whether the managed packet queued greater than 5 */
if (!ieee->check_nic_enough_desc(ieee->dev, tcb_desc->queue_index) ||\
(skb_queue_len(&ieee->skb_waitQ[tcb_desc->queue_index]) != 0) || \
- (ieee->queue_stop) ) {
+ (ieee->queue_stop)) {
/* insert the skb packet to the management queue */
/* as for the completion function, it does not need
* to check it any more.
@@ -493,7 +493,7 @@ static void ieee80211_softmac_scan_wq(struct work_struct *work)
}
}
} while (!channel_map[ieee->current_network.channel]);
- if (ieee->scanning == 0 )
+ if (ieee->scanning == 0)
goto out;
ieee->set_chan(ieee->dev, ieee->current_network.channel);
if (channel_map[ieee->current_network.channel] == 1)
@@ -584,7 +584,7 @@ EXPORT_SYMBOL(ieee80211_stop_scan);
/* called with ieee->lock held */
static void ieee80211_start_scan(struct ieee80211_device *ieee)
{
- if (IS_DOT11D_ENABLE(ieee) ) {
+ if (IS_DOT11D_ENABLE(ieee)) {
if (IS_COUNTRY_IE_VALID(ieee))
RESET_CIE_WATCHDOG(ieee);
}
@@ -601,7 +601,7 @@ static void ieee80211_start_scan(struct ieee80211_device *ieee)
/* called with wx_mutex held */
void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
{
- if (IS_DOT11D_ENABLE(ieee) ) {
+ if (IS_DOT11D_ENABLE(ieee)) {
if (IS_COUNTRY_IE_VALID(ieee))
RESET_CIE_WATCHDOG(ieee);
}
@@ -728,9 +728,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
return NULL;
skb_reserve(skb, ieee->tx_headroom);
beacon_buf = skb_put(skb, (beacon_size - ieee->tx_headroom));
- memcpy (beacon_buf->header.addr1, dest, ETH_ALEN);
- memcpy (beacon_buf->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
- memcpy (beacon_buf->header.addr3, ieee->current_network.bssid, ETH_ALEN);
+ memcpy(beacon_buf->header.addr1, dest, ETH_ALEN);
+ memcpy(beacon_buf->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
+ memcpy(beacon_buf->header.addr3, ieee->current_network.bssid, ETH_ALEN);
beacon_buf->header.duration_id = 0; /* FIXME */
beacon_buf->beacon_interval =
@@ -973,7 +973,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
HTConstructCapabilityElement(ieee, ht_cap_buf, &ht_cap_len, encrypt);
if (ieee->pHTInfo->bCurrentRT2RTAggregation) {
realtek_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer;
- realtek_ie_len = sizeof( ieee->pHTInfo->szRT2RTAggBuffer);
+ realtek_ie_len = sizeof(ieee->pHTInfo->szRT2RTAggBuffer);
HTConstructRT2RTAggElement(ieee, realtek_ie_buf, &realtek_ie_len);
}
}
@@ -1033,7 +1033,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN);//for HW security, John
hdr->capability = cpu_to_le16(WLAN_CAPABILITY_BSS);
- if (beacon->capability & WLAN_CAPABILITY_PRIVACY )
+ if (beacon->capability & WLAN_CAPABILITY_PRIVACY)
hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
if (beacon->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
@@ -1237,7 +1237,7 @@ static void ieee80211_auth_challenge(struct ieee80211_device *ieee,
IEEE80211_DEBUG_MGMT("Sending authentication challenge response\n");
- ieee80211_encrypt_fragment(ieee, skb, sizeof(struct rtl_80211_hdr_3addr ));
+ ieee80211_encrypt_fragment(ieee, skb, sizeof(struct rtl_80211_hdr_3addr));
softmac_mgmt_xmit(skb, ieee);
mod_timer(&ieee->associate_timer, jiffies + (HZ / 2));
@@ -1287,7 +1287,7 @@ static void ieee80211_associate_complete_wq(struct work_struct *work)
}
ieee->LinkDetectInfo.SlotNum = 2 * (1 + ieee->current_network.beacon_interval / 500);
// To prevent the immediately calling watch_dog after association.
- if (ieee->LinkDetectInfo.NumRecvBcnInPeriod == 0 || ieee->LinkDetectInfo.NumRecvDataInPeriod == 0 ) {
+ if (ieee->LinkDetectInfo.NumRecvBcnInPeriod == 0 || ieee->LinkDetectInfo.NumRecvDataInPeriod == 0) {
ieee->LinkDetectInfo.NumRecvBcnInPeriod = 1;
ieee->LinkDetectInfo.NumRecvDataInPeriod = 1;
}
@@ -1367,13 +1367,13 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
ssidmatch = (ieee->current_network.ssid_len == net->ssid_len) &&
(!strncmp(ieee->current_network.ssid, net->ssid, net->ssid_len));
- if ( /* if the user set the AP check if match.
- * if the network does not broadcast essid we check the user supplyed ANY essid
- * if the network does broadcast and the user does not set essid it is OK
- * if the network does broadcast and the user did set essid chech if essid match
- */
- (apset && apmatch &&
- ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) ||
+ /* if the user set the AP check if match.
+ * if the network does not broadcast essid we check the user supplyed ANY essid
+ * if the network does broadcast and the user does not set essid it is OK
+ * if the network does broadcast and the user did set essid chech if essid match
+ */
+ if ((apset && apmatch &&
+ ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
/* if the ap is not set, check that the user set the bssid
* and the network does broadcast and that those two bssid matches
*/
@@ -1508,14 +1508,14 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,
struct rtl_80211_hdr_3addr *header =
(struct rtl_80211_hdr_3addr *)skb->data;
- if (skb->len < sizeof (struct rtl_80211_hdr_3addr ))
+ if (skb->len < sizeof(struct rtl_80211_hdr_3addr))
return -1; /* corrupted */
memcpy(src, header->addr2, ETH_ALEN);
skbend = (u8 *)skb->data + skb->len;
- tag = skb->data + sizeof (struct rtl_80211_hdr_3addr );
+ tag = skb->data + sizeof(struct rtl_80211_hdr_3addr);
while (tag + 1 < skbend) {
if (*tag == 0) {
@@ -1660,7 +1660,7 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,
ieee->last_rx_ps_time + msecs_to_jiffies(timeout)))
return 0;
- if ((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE ) &&
+ if ((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE) &&
(ieee->mgmt_queue_tail != ieee->mgmt_queue_head))
return 0;
@@ -1931,12 +1931,10 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
} else {
/* aid could not been allocated */
ieee->softmac_stats.rx_ass_err++;
- printk(
- "Association response status code 0x%x\n",
- errcode);
- IEEE80211_DEBUG_MGMT(
- "Association response status code 0x%x\n",
- errcode);
+ printk("Association response status code 0x%x\n",
+ errcode);
+ IEEE80211_DEBUG_MGMT("Association response status code 0x%x\n",
+ errcode);
if (ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT)
schedule_work(&ieee->associate_procedure_wq);
else
@@ -2060,9 +2058,8 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]);
#endif
} else {
- ieee->softmac_data_hard_start_xmit(
- txb->fragments[i],
- ieee->dev, ieee->rate);
+ ieee->softmac_data_hard_start_xmit(txb->fragments[i],
+ ieee->dev, ieee->rate);
//ieee->stats.tx_packets++;
//ieee->stats.tx_bytes += txb->fragments[i]->len;
//ieee->dev->trans_start = jiffies;
@@ -2084,10 +2081,9 @@ static void ieee80211_resume_tx(struct ieee80211_device *ieee)
ieee->tx_pending.frag = i;
return;
} else {
- ieee->softmac_data_hard_start_xmit(
- ieee->tx_pending.txb->fragments[i],
- ieee->dev, ieee->rate);
- //(i+1)<ieee->tx_pending.txb->nr_frags);
+ ieee->softmac_data_hard_start_xmit(ieee->tx_pending.txb->fragments[i],
+ ieee->dev, ieee->rate);
+ //(i+1)<ieee->tx_pending.txb->nr_frags);
ieee->stats.tx_packets++;
netif_trans_update(ieee->dev);
}
@@ -2935,10 +2931,9 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
return ret;
}
-static inline struct sk_buff *ieee80211_disassociate_skb(
- struct ieee80211_network *beacon,
- struct ieee80211_device *ieee,
- u8 asRsn)
+static inline struct sk_buff *ieee80211_disassociate_skb(struct ieee80211_network *beacon,
+ struct ieee80211_device *ieee,
+ u8 asRsn)
{
struct sk_buff *skb;
struct ieee80211_disassoc *disass;
@@ -2960,10 +2955,9 @@ static inline struct sk_buff *ieee80211_disassociate_skb(
}
void
-SendDisassociation(
- struct ieee80211_device *ieee,
- u8 *asSta,
- u8 asRsn
+SendDisassociation(struct ieee80211_device *ieee,
+ u8 *asSta,
+ u8 asRsn
)
{
struct ieee80211_network *beacon = &ieee->current_network;
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style
2018-07-10 15:05 ` [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style John Whitmore
@ 2018-07-11 11:13 ` Greg KH
2018-07-11 14:09 ` John Whitmore
0 siblings, 1 reply; 15+ messages in thread
From: Greg KH @ 2018-07-11 11:13 UTC (permalink / raw)
To: John Whitmore
Cc: linux-kernel, devel, kstewart, keescook, aastha.gupta4104,
pombredanne, tglx
On Tue, Jul 10, 2018 at 04:05:18PM +0100, John Whitmore wrote:
> Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
Wrap your changelog text at 72 columns like your editor asked you to :(
I'll fix it up this time...
greg k-h
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style
2018-07-11 11:13 ` Greg KH
@ 2018-07-11 14:09 ` John Whitmore
2018-07-11 14:22 ` Greg KH
0 siblings, 1 reply; 15+ messages in thread
From: John Whitmore @ 2018-07-11 14:09 UTC (permalink / raw)
To: Greg KH
Cc: John Whitmore, linux-kernel, devel, kstewart, keescook,
aastha.gupta4104, pombredanne, tglx
On Wed, Jul 11, 2018 at 01:13:49PM +0200, Greg KH wrote:
> On Tue, Jul 10, 2018 at 04:05:18PM +0100, John Whitmore wrote:
> > Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
>
> Wrap your changelog text at 72 columns like your editor asked you to :(
>
> I'll fix it up this time...
Oops sorry and thanks. I thought the magic number was 75 which I got from:
https://www.kernel.org/doc/html/v4.16/process/submitting-patches.html
jwhitmore
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style
2018-07-11 14:09 ` John Whitmore
@ 2018-07-11 14:22 ` Greg KH
2018-07-11 14:27 ` John Whitmore
0 siblings, 1 reply; 15+ messages in thread
From: Greg KH @ 2018-07-11 14:22 UTC (permalink / raw)
To: John Whitmore
Cc: devel, kstewart, keescook, aastha.gupta4104, linux-kernel,
John Whitmore, pombredanne, tglx
On Wed, Jul 11, 2018 at 03:09:37PM +0100, John Whitmore wrote:
> On Wed, Jul 11, 2018 at 01:13:49PM +0200, Greg KH wrote:
> > On Tue, Jul 10, 2018 at 04:05:18PM +0100, John Whitmore wrote:
> > > Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
> >
> > Wrap your changelog text at 72 columns like your editor asked you to :(
> >
> > I'll fix it up this time...
>
> Oops sorry and thanks. I thought the magic number was 75 which I got from:
>
> https://www.kernel.org/doc/html/v4.16/process/submitting-patches.html
75 works as well :)
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style
2018-07-11 14:22 ` Greg KH
@ 2018-07-11 14:27 ` John Whitmore
2018-07-11 14:29 ` Dan Carpenter
0 siblings, 1 reply; 15+ messages in thread
From: John Whitmore @ 2018-07-11 14:27 UTC (permalink / raw)
To: Greg KH
Cc: devel, kstewart, keescook, aastha.gupta4104, linux-kernel,
John Whitmore, pombredanne, tglx
On Wed, Jul 11, 2018 at 04:22:50PM +0200, Greg KH wrote:
> On Wed, Jul 11, 2018 at 03:09:37PM +0100, John Whitmore wrote:
> > On Wed, Jul 11, 2018 at 01:13:49PM +0200, Greg KH wrote:
> > > On Tue, Jul 10, 2018 at 04:05:18PM +0100, John Whitmore wrote:
> > > > Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
> > >
> > > Wrap your changelog text at 72 columns like your editor asked you to :(
> > >
> > > I'll fix it up this time...
> >
> > Oops sorry and thanks. I thought the magic number was 75 which I got from:
> >
> > https://www.kernel.org/doc/html/v4.16/process/submitting-patches.html
>
> 75 works as well :)
>
Well if I went over 75, which I knew about I'm very sorry I messed up. I'll
keep an eye out in future. Might be using the wrong editor but let's not go
there.
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style
2018-07-11 14:27 ` John Whitmore
@ 2018-07-11 14:29 ` Dan Carpenter
2018-07-11 14:39 ` John Whitmore
0 siblings, 1 reply; 15+ messages in thread
From: Dan Carpenter @ 2018-07-11 14:29 UTC (permalink / raw)
To: John Whitmore
Cc: Greg KH, devel, kstewart, keescook, aastha.gupta4104,
linux-kernel, John Whitmore, pombredanne, tglx
On Wed, Jul 11, 2018 at 03:27:11PM +0100, John Whitmore wrote:
> On Wed, Jul 11, 2018 at 04:22:50PM +0200, Greg KH wrote:
> > On Wed, Jul 11, 2018 at 03:09:37PM +0100, John Whitmore wrote:
> > > On Wed, Jul 11, 2018 at 01:13:49PM +0200, Greg KH wrote:
> > > > On Tue, Jul 10, 2018 at 04:05:18PM +0100, John Whitmore wrote:
> > > > > Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
> > > >
> > > > Wrap your changelog text at 72 columns like your editor asked you to :(
> > > >
> > > > I'll fix it up this time...
> > >
> > > Oops sorry and thanks. I thought the magic number was 75 which I got from:
> > >
> > > https://www.kernel.org/doc/html/v4.16/process/submitting-patches.html
> >
> > 75 works as well :)
> >
>
> Well if I went over 75, which I knew about I'm very sorry I messed up. I'll
> keep an eye out in future. Might be using the wrong editor but let's not go
> there.
Here is the line:
Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
It's 128 characters.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style
2018-07-11 14:29 ` Dan Carpenter
@ 2018-07-11 14:39 ` John Whitmore
0 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-11 14:39 UTC (permalink / raw)
To: Dan Carpenter
Cc: Greg KH, devel, kstewart, keescook, aastha.gupta4104,
linux-kernel, John Whitmore, pombredanne, tglx
On Wed, Jul 11, 2018 at 05:29:43PM +0300, Dan Carpenter wrote:
> On Wed, Jul 11, 2018 at 03:27:11PM +0100, John Whitmore wrote:
> > On Wed, Jul 11, 2018 at 04:22:50PM +0200, Greg KH wrote:
> > > On Wed, Jul 11, 2018 at 03:09:37PM +0100, John Whitmore wrote:
> > > > On Wed, Jul 11, 2018 at 01:13:49PM +0200, Greg KH wrote:
> > > > > On Tue, Jul 10, 2018 at 04:05:18PM +0100, John Whitmore wrote:
> > > > > > Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
> > > > >
> > > > > Wrap your changelog text at 72 columns like your editor asked you to :(
> > > > >
> > > > > I'll fix it up this time...
> > > >
> > > > Oops sorry and thanks. I thought the magic number was 75 which I got from:
> > > >
> > > > https://www.kernel.org/doc/html/v4.16/process/submitting-patches.html
> > >
> > > 75 works as well :)
> > >
> >
> > Well if I went over 75, which I knew about I'm very sorry I messed up. I'll
> > keep an eye out in future. Might be using the wrong editor but let's not go
> > there.
>
> Here is the line:
>
> Corrected coding style issues aroung opening and closed parenthesis. Spaces, or blank line, removed from after '(' or before ')'
>
> It's 128 characters.
>
> regards,
> dan carpenter
>
Scissors I really messed that up. Sorry again, editor must have dropped out of
auto-fill-mode for some reason. :(
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 4/8] staging:rtl8192u: Remove prohibited spaces - Coding Style
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
` (2 preceding siblings ...)
2018-07-10 15:05 ` [PATCH v2 3/8] staging:rtl8192u: Correct spacing before and after parenthesis - Style John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
2018-07-10 15:05 ` [PATCH v2 5/8] staging:rtl8192u: Move trailing conditional statement to the following line John Whitmore
` (3 subsequent siblings)
7 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
Simple removal of spaces prohibited by the coding standard.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../staging/rtl8192u/ieee80211/ieee80211_softmac.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 7bec24d0a234..64d7980e7e13 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -1073,7 +1073,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
// CCX1 spec V1.13, A01.1 CKIP Negotiation (page23):
// "The CKIP negotiation is started with the associate request from the client to the access point,
// containing an Aironet element with both the MIC and KP bits set."
- osCcxAironetIE.Octet[IE_CISCO_FLAG_POSITION] |= (SUPPORT_CKIP_PK | SUPPORT_CKIP_MIC) ;
+ osCcxAironetIE.Octet[IE_CISCO_FLAG_POSITION] |= (SUPPORT_CKIP_PK | SUPPORT_CKIP_MIC);
tag = skb_put(skb, ckip_ie_len);
*tag++ = MFIE_TYPE_AIRONET;
*tag++ = osCcxAironetIE.Length;
@@ -1202,7 +1202,7 @@ static void ieee80211_associate_step1(struct ieee80211_device *ieee)
if (!skb) {
ieee80211_associate_abort(ieee);
} else {
- ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING ;
+ ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING;
IEEE80211_DEBUG_MGMT("Sending authentication request\n");
softmac_mgmt_xmit(skb, ieee);
//BUGON when you try to add_timer twice, using mod_timer may be better, john0709
@@ -1796,7 +1796,7 @@ static void ieee80211_process_action(struct ieee80211_device *ieee,
return;
}
tmp = *act;
- act ++;
+ act++;
switch (tmp) {
case ACT_CAT_BA:
if (*act == ACT_ADDBAREQ)
@@ -2115,7 +2115,7 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee)
struct rtl_80211_hdr_3addr *header;
spin_lock_irqsave(&ieee->lock, flags);
- if (! ieee->queue_stop) goto exit;
+ if (!ieee->queue_stop) goto exit;
ieee->queue_stop = 0;
@@ -2141,7 +2141,7 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee)
ieee->softmac_stats.swtxawake++;
netif_wake_queue(ieee->dev);
}
-exit :
+exit:
spin_unlock_irqrestore(&ieee->lock, flags);
}
EXPORT_SYMBOL(ieee80211_wake_queue);
@@ -2315,7 +2315,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee)
// STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
//
if (IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee)) {
- if (! ieee->bGlobalDomain)
+ if (!ieee->bGlobalDomain)
return;
}
/* check if we have already found the net we
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 5/8] staging:rtl8192u: Move trailing conditional statement to the following line
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
` (3 preceding siblings ...)
2018-07-10 15:05 ` [PATCH v2 4/8] staging:rtl8192u: Remove prohibited spaces - Coding Style John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
2018-07-10 15:05 ` [PATCH v2 6/8] staging:rtl8192u: Remove unnecessary parentheses - Coding Style John Whitmore
` (2 subsequent siblings)
7 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
Coding standard requires that the conditional statement is not on the same
line as the 'if' or 'else' but on the following line. Statements moved
accordingly.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/ieee80211_softmac.c | 25 +++++++++++++------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 64d7980e7e13..d916cc5b97db 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -622,7 +622,8 @@ ieee80211_authentication_req(struct ieee80211_network *beacon,
int len = sizeof(struct ieee80211_authentication) + challengelen + ieee->tx_headroom;
skb = dev_alloc_skb(len);
- if (!skb) return NULL;
+ if (!skb)
+ return NULL;
skb_reserve(skb, ieee->tx_headroom);
auth = skb_put(skb, sizeof(struct ieee80211_authentication));
@@ -680,7 +681,8 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
u8 *tmp_generic_ie_buf = NULL;
u8 tmp_generic_ie_len = 0;
- if (rate_ex_len > 0) rate_ex_len += 2;
+ if (rate_ex_len > 0)
+ rate_ex_len += 2;
if (ieee->current_network.capability & WLAN_CAPABILITY_IBSS)
atim_len = 4;
@@ -834,7 +836,8 @@ static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee,
if (ieee->host_encrypt)
crypt = ieee->crypt[ieee->tx_keyidx];
- else crypt = NULL;
+ else
+ crypt = NULL;
encrypt = crypt && crypt->ops;
@@ -843,8 +846,10 @@ static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee,
assoc->status = 0;
assoc->aid = cpu_to_le16(ieee->assoc_id);
- if (ieee->assoc_id == 0x2007) ieee->assoc_id = 0;
- else ieee->assoc_id++;
+ if (ieee->assoc_id == 0x2007)
+ ieee->assoc_id = 0;
+ else
+ ieee->assoc_id++;
tag = skb_put(skb, rate_len);
@@ -1529,9 +1534,12 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,
}
//IEEE80211DMESG("Card MAC address is "MACSTR, MAC2STR(src));
- if (ssidlen == 0) return 1;
+ if (ssidlen == 0)
+ return 1;
+
+ if (!ssid)
+ return 1; /* ssid not found in tagged param */
- if (!ssid) return 1; /* ssid not found in tagged param */
return (!strncmp(ssid, ieee->current_network.ssid, ssidlen));
}
@@ -2115,7 +2123,8 @@ void ieee80211_wake_queue(struct ieee80211_device *ieee)
struct rtl_80211_hdr_3addr *header;
spin_lock_irqsave(&ieee->lock, flags);
- if (!ieee->queue_stop) goto exit;
+ if (!ieee->queue_stop)
+ goto exit;
ieee->queue_stop = 0;
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 6/8] staging:rtl8192u: Remove unnecessary parentheses - Coding Style
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
` (4 preceding siblings ...)
2018-07-10 15:05 ` [PATCH v2 5/8] staging:rtl8192u: Move trailing conditional statement to the following line John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
2018-07-10 15:05 ` [PATCH v2 7/8] staging:rtl8192u: Correct indentation of ieee80211_softmac_new_net() John Whitmore
2018-07-10 15:05 ` [PATCH v2 8/8] staging:rtl8192u: Correction of indentation issues - Coding Style John Whitmore
7 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
checkpatch.pl flags unnecessary parentheses, so removed from code.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index d916cc5b97db..023f23d2eb67 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -699,9 +699,9 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
encrypt = ieee->host_encrypt && crypt && crypt->ops &&
((0 == strcmp(crypt->ops->name, "WEP") || wpa_ie_len));
/* HT ralated element */
- tmp_ht_cap_buf = (u8 *)&(ieee->pHTInfo->SelfHTCap);
+ tmp_ht_cap_buf = (u8 *)&ieee->pHTInfo->SelfHTCap;
tmp_ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
- tmp_ht_info_buf = (u8 *)&(ieee->pHTInfo->SelfHTInfo);
+ tmp_ht_info_buf = (u8 *)&ieee->pHTInfo->SelfHTInfo;
tmp_ht_info_len = sizeof(ieee->pHTInfo->SelfHTInfo);
HTConstructCapabilityElement(ieee, tmp_ht_cap_buf, &tmp_ht_cap_len, encrypt);
HTConstructInfoElement(ieee, tmp_ht_info_buf, &tmp_ht_info_len, encrypt);
@@ -973,7 +973,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
/* Include High Throuput capability && Realtek proprietary */
if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {
- ht_cap_buf = (u8 *)&(ieee->pHTInfo->SelfHTCap);
+ ht_cap_buf = (u8 *)&ieee->pHTInfo->SelfHTCap;
ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
HTConstructCapabilityElement(ieee, ht_cap_buf, &ht_cap_len, encrypt);
if (ieee->pHTInfo->bCurrentRT2RTAggregation) {
@@ -1413,7 +1413,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
ieee->current_network.bssht.bdSupportHT) {
/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/
// ieee->pHTInfo->bCurrentHTSupport = true;
- HTResetSelfAndSavePeerSetting(ieee, &(ieee->current_network));
+ HTResetSelfAndSavePeerSetting(ieee, &ieee->current_network);
} else {
ieee->pHTInfo->bCurrentHTSupport = false;
}
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 7/8] staging:rtl8192u: Correct indentation of ieee80211_softmac_new_net()
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
` (5 preceding siblings ...)
2018-07-10 15:05 ` [PATCH v2 6/8] staging:rtl8192u: Remove unnecessary parentheses - Coding Style John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
2018-07-10 15:05 ` [PATCH v2 8/8] staging:rtl8192u: Correction of indentation issues - Coding Style John Whitmore
7 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
Coding style change to correct the indentation of the function
ieee80211_softmac_new_net(). A large proportion of the function's if statements
were incorrectly indented.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/ieee80211_softmac.c | 101 +++++++++---------
1 file changed, 50 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 023f23d2eb67..6507b6101342 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -1378,63 +1378,62 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
* if the network does broadcast and the user did set essid chech if essid match
*/
if ((apset && apmatch &&
- ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
- /* if the ap is not set, check that the user set the bssid
- * and the network does broadcast and that those two bssid matches
+ ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
+ /* if the ap is not set, check that the user set the bssid
+ * and the network does broadcast and that those two bssid matches
+ */
+ (!apset && ssidset && ssidbroad && ssidmatch)) {
+ /* if the essid is hidden replace it with the
+ * essid provided by the user.
*/
- (!apset && ssidset && ssidbroad && ssidmatch)
- ) {
- /* if the essid is hidden replace it with the
- * essid provided by the user.
- */
- if (!ssidbroad) {
- strncpy(tmp_ssid, ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
- tmp_ssid_len = ieee->current_network.ssid_len;
- }
- memcpy(&ieee->current_network, net, sizeof(struct ieee80211_network));
-
- strncpy(ieee->current_network.ssid, tmp_ssid, IW_ESSID_MAX_SIZE);
- ieee->current_network.ssid_len = tmp_ssid_len;
- printk(KERN_INFO"Linking with %s,channel:%d, qos:%d, myHT:%d, networkHT:%d\n",
- ieee->current_network.ssid,
- ieee->current_network.channel,
- ieee->current_network.qos_data.supported,
- ieee->pHTInfo->bEnableHT,
- ieee->current_network.bssht.bdSupportHT);
-
- //ieee->pHTInfo->IOTAction = 0;
- HTResetIOTSetting(ieee->pHTInfo);
- if (ieee->iw_mode == IW_MODE_INFRA) {
- /* Join the network for the first time */
- ieee->AsocRetryCount = 0;
- //for HT by amy 080514
- if ((ieee->current_network.qos_data.supported == 1) &&
- // (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT))
- ieee->current_network.bssht.bdSupportHT) {
+ if (!ssidbroad) {
+ strncpy(tmp_ssid, ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
+ tmp_ssid_len = ieee->current_network.ssid_len;
+ }
+ memcpy(&ieee->current_network, net, sizeof(struct ieee80211_network));
+
+ strncpy(ieee->current_network.ssid, tmp_ssid, IW_ESSID_MAX_SIZE);
+ ieee->current_network.ssid_len = tmp_ssid_len;
+ printk(KERN_INFO"Linking with %s,channel:%d, qos:%d, myHT:%d, networkHT:%d\n",
+ ieee->current_network.ssid,
+ ieee->current_network.channel,
+ ieee->current_network.qos_data.supported,
+ ieee->pHTInfo->bEnableHT,
+ ieee->current_network.bssht.bdSupportHT);
+
+ //ieee->pHTInfo->IOTAction = 0;
+ HTResetIOTSetting(ieee->pHTInfo);
+ if (ieee->iw_mode == IW_MODE_INFRA) {
+ /* Join the network for the first time */
+ ieee->AsocRetryCount = 0;
+ //for HT by amy 080514
+ if ((ieee->current_network.qos_data.supported == 1) &&
+ // (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT))
+ ieee->current_network.bssht.bdSupportHT) {
/*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/
// ieee->pHTInfo->bCurrentHTSupport = true;
- HTResetSelfAndSavePeerSetting(ieee, &ieee->current_network);
- } else {
- ieee->pHTInfo->bCurrentHTSupport = false;
- }
+ HTResetSelfAndSavePeerSetting(ieee, &ieee->current_network);
+ } else {
+ ieee->pHTInfo->bCurrentHTSupport = false;
+ }
- ieee->state = IEEE80211_ASSOCIATING;
- schedule_work(&ieee->associate_procedure_wq);
+ ieee->state = IEEE80211_ASSOCIATING;
+ schedule_work(&ieee->associate_procedure_wq);
+ } else {
+ if (ieee80211_is_54g(&ieee->current_network) &&
+ (ieee->modulation & IEEE80211_OFDM_MODULATION)) {
+ ieee->rate = 108;
+ ieee->SetWirelessMode(ieee->dev, IEEE_G);
+ printk(KERN_INFO"Using G rates\n");
} else {
- if (ieee80211_is_54g(&ieee->current_network) &&
- (ieee->modulation & IEEE80211_OFDM_MODULATION)) {
- ieee->rate = 108;
- ieee->SetWirelessMode(ieee->dev, IEEE_G);
- printk(KERN_INFO"Using G rates\n");
- } else {
- ieee->rate = 22;
- ieee->SetWirelessMode(ieee->dev, IEEE_B);
- printk(KERN_INFO"Using B rates\n");
- }
- memset(ieee->dot11HTOperationalRateSet, 0, 16);
- //HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
- ieee->state = IEEE80211_LINKED;
+ ieee->rate = 22;
+ ieee->SetWirelessMode(ieee->dev, IEEE_B);
+ printk(KERN_INFO"Using B rates\n");
}
+ memset(ieee->dot11HTOperationalRateSet, 0, 16);
+ //HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+ ieee->state = IEEE80211_LINKED;
+ }
}
}
}
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 8/8] staging:rtl8192u: Correction of indentation issues - Coding Style
2018-07-10 15:05 [PATCH v2 0/8] staging:rtl8192u Coding style changes John Whitmore
` (6 preceding siblings ...)
2018-07-10 15:05 ` [PATCH v2 7/8] staging:rtl8192u: Correct indentation of ieee80211_softmac_new_net() John Whitmore
@ 2018-07-10 15:05 ` John Whitmore
7 siblings, 0 replies; 15+ messages in thread
From: John Whitmore @ 2018-07-10 15:05 UTC (permalink / raw)
To: linux-kernel
Cc: devel, gregkh, aastha.gupta4104, keescook, pombredanne, kstewart,
tglx, John Whitmore
Simple changes to correct indentation issues.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../rtl8192u/ieee80211/ieee80211_softmac.c | 76 +++++++++----------
1 file changed, 37 insertions(+), 39 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 6507b6101342..fe61451f6c14 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -46,7 +46,6 @@ static unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
rate_len = IEEE80211_CCK_RATE_LEN + 2;
if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-
rate_len += IEEE80211_OFDM_RATE_LEN + 2;
return rate_len;
@@ -77,7 +76,7 @@ static void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p)
{
u8 *tag = *tag_p;
- if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
+ if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
*tag++ = MFIE_TYPE_RATES_EX;
*tag++ = 8;
*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
@@ -261,7 +260,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
ieee->seq_ctrl[0]++;
/* check whether the managed packet queued greater than 5 */
- if (!ieee->check_nic_enough_desc(ieee->dev, tcb_desc->queue_index) ||\
+ if (!ieee->check_nic_enough_desc(ieee->dev, tcb_desc->queue_index) || \
(skb_queue_len(&ieee->skb_waitQ[tcb_desc->queue_index]) != 0) || \
(ieee->queue_stop)) {
/* insert the skb packet to the management queue */
@@ -630,7 +629,7 @@ ieee80211_authentication_req(struct ieee80211_network *beacon,
if (challengelen)
auth->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_AUTH
- | IEEE80211_FCTL_WEP);
+ | IEEE80211_FCTL_WEP);
else
auth->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_AUTH);
@@ -904,8 +903,8 @@ static struct sk_buff *ieee80211_null_func(struct ieee80211_device *ieee,
memcpy(hdr->addr3, ieee->current_network.bssid, ETH_ALEN);
hdr->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
- IEEE80211_STYPE_NULLFUNC | IEEE80211_FCTL_TODS |
- (pwr ? IEEE80211_FCTL_PM : 0));
+ IEEE80211_STYPE_NULLFUNC | IEEE80211_FCTL_TODS |
+ (pwr ? IEEE80211_FCTL_PM : 0));
return skb;
}
@@ -1182,7 +1181,7 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)
ieee->state = IEEE80211_ASSOCIATING_RETRY;
schedule_delayed_work(&ieee->associate_retry_wq, \
- IEEE80211_SOFTMAC_ASSOC_RETRY_TIME);
+ IEEE80211_SOFTMAC_ASSOC_RETRY_TIME);
spin_unlock_irqrestore(&ieee->lock, flags);
}
@@ -1674,7 +1673,7 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,
if (time_l) {
*time_l = ieee->current_network.last_dtim_sta_time[0]
+ (ieee->current_network.beacon_interval
- * ieee->current_network.dtim_period) * 1000;
+ * ieee->current_network.dtim_period) * 1000;
}
if (time_h) {
@@ -1696,9 +1695,9 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
spin_lock_irqsave(&ieee->lock, flags);
if ((ieee->ps == IEEE80211_PS_DISABLED ||
- ieee->iw_mode != IW_MODE_INFRA ||
- ieee->state != IEEE80211_LINKED)) {
- // #warning CHECK_LOCK_HERE
+ ieee->iw_mode != IW_MODE_INFRA ||
+ ieee->state != IEEE80211_LINKED)) {
+ // #warning CHECK_LOCK_HERE
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
ieee80211_sta_wakeup(ieee, 1);
@@ -1880,8 +1879,8 @@ static void ieee80211_check_auth_response(struct ieee80211_device *ieee,
inline int
ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
- struct ieee80211_rx_stats *rx_stats, u16 type,
- u16 stype)
+ struct ieee80211_rx_stats *rx_stats, u16 type,
+ u16 stype)
{
struct rtl_80211_hdr_3addr *header = (struct rtl_80211_hdr_3addr *)skb->data;
u16 errcode;
@@ -1923,8 +1922,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
assoc_resp = (struct ieee80211_assoc_response_frame *)skb->data;
memset(network, 0, sizeof(*network));
if (ieee80211_parse_info_param(ieee, assoc_resp->info_element,\
- rx_stats->len - sizeof(*assoc_resp),\
- network, rx_stats)) {
+ rx_stats->len - sizeof(*assoc_resp), \
+ network, rx_stats)) {
return 1;
} else {
//filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
@@ -1953,15 +1952,14 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
case IEEE80211_STYPE_ASSOC_REQ:
case IEEE80211_STYPE_REASSOC_REQ:
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
- ieee->iw_mode == IW_MODE_MASTER)
-
+ ieee->iw_mode == IW_MODE_MASTER)
ieee80211_rx_assoc_rq(ieee, skb);
break;
case IEEE80211_STYPE_AUTH:
if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) {
if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING
- && ieee->iw_mode == IW_MODE_INFRA) {
+ && ieee->iw_mode == IW_MODE_INFRA) {
IEEE80211_DEBUG_MGMT("Received auth response");
ieee80211_check_auth_response(ieee, skb);
} else if (ieee->iw_mode == IW_MODE_MASTER) {
@@ -1972,9 +1970,9 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
case IEEE80211_STYPE_PROBE_REQ:
if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
- ((ieee->iw_mode == IW_MODE_ADHOC ||
- ieee->iw_mode == IW_MODE_MASTER) &&
- ieee->state == IEEE80211_LINKED)) {
+ ((ieee->iw_mode == IW_MODE_ADHOC ||
+ ieee->iw_mode == IW_MODE_MASTER) &&
+ ieee->state == IEEE80211_LINKED)) {
ieee80211_rx_probe_rq(ieee, skb);
}
break;
@@ -1985,8 +1983,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
* both for disassociation and deauthentication
*/
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
- ieee->state == IEEE80211_LINKED &&
- ieee->iw_mode == IW_MODE_INFRA) {
+ ieee->state == IEEE80211_LINKED &&
+ ieee->iw_mode == IW_MODE_INFRA) {
ieee->state = IEEE80211_ASSOCIATING;
ieee->softmac_stats.reassoc++;
@@ -2051,8 +2049,8 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
#else
if ((skb_queue_len(&ieee->skb_waitQ[queue_index]) != 0) ||
#endif
- (!ieee->check_nic_enough_desc(ieee->dev, queue_index)) || \
- (ieee->queue_stop)) {
+ (!ieee->check_nic_enough_desc(ieee->dev, queue_index)) || \
+ (ieee->queue_stop)) {
/* insert the skb packet to the wait queue */
/* as for the completion function, it does not need
* to check it any more.
@@ -2354,10 +2352,10 @@ void ieee80211_disassociate(struct ieee80211_device *ieee)
{
netif_carrier_off(ieee->dev);
if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)
- ieee80211_reset_queue(ieee);
+ ieee80211_reset_queue(ieee);
if (ieee->data_hard_stop)
- ieee->data_hard_stop(ieee->dev);
+ ieee->data_hard_stop(ieee->dev);
if (IS_DOT11D_ENABLE(ieee))
Dot11d_Reset(ieee);
ieee->state = IEEE80211_NOLINK;
@@ -2508,9 +2506,9 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)
// ieee->set_chan(ieee->dev,ieee->current_network.channel);
for (i = 0; i < 17; i++) {
- ieee->last_rxseq_num[i] = -1;
- ieee->last_rxfrag_num[i] = -1;
- ieee->last_packet_time[i] = 0;
+ ieee->last_rxseq_num[i] = -1;
+ ieee->last_rxfrag_num[i] = -1;
+ ieee->last_packet_time[i] = 0;
}
ieee->init_wmmparam_flag = 0;//reinitialize AC_xx_PARAM registers.
@@ -2598,8 +2596,8 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
spin_lock_init(&ieee->beacon_lock);
tasklet_init(&ieee->ps_task,
- (void(*)(unsigned long)) ieee80211_sta_ps,
- (unsigned long)ieee);
+ (void(*)(unsigned long)) ieee80211_sta_ps,
+ (unsigned long)ieee);
}
void ieee80211_softmac_free(struct ieee80211_device *ieee)
@@ -2968,14 +2966,14 @@ SendDisassociation(struct ieee80211_device *ieee,
u8 asRsn
)
{
- struct ieee80211_network *beacon = &ieee->current_network;
- struct sk_buff *skb;
+ struct ieee80211_network *beacon = &ieee->current_network;
+ struct sk_buff *skb;
- skb = ieee80211_disassociate_skb(beacon, ieee, asRsn);
- if (skb) {
- softmac_mgmt_xmit(skb, ieee);
- //dev_kfree_skb_any(skb);//edit by thomas
- }
+ skb = ieee80211_disassociate_skb(beacon, ieee, asRsn);
+ if (skb) {
+ softmac_mgmt_xmit(skb, ieee);
+ //dev_kfree_skb_any(skb);//edit by thomas
+ }
}
EXPORT_SYMBOL(SendDisassociation);
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread