From: Matthias Kaehlcke <mka@chromium.org>
To: Amit Kucheria <amit.kucheria@linaro.org>
Cc: linux-kernel@vger.kernel.org, rnayak@codeaurora.org,
linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org,
edubezval@gmail.com, smohanad@codeaurora.org,
vivek.gautam@codeaurora.org, andy.gross@linaro.org,
dianders@chromium.org, Zhang Rui <rui.zhang@intel.com>,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v7 4/7] thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
Date: Tue, 17 Jul 2018 16:54:23 -0700 [thread overview]
Message-ID: <20180717235423.GE129942@google.com> (raw)
In-Reply-To: <3bd2c05db1bfe6fd3891abd87b0c767152346a1d.1531384019.git.amit.kucheria@linaro.org>
On Thu, Jul 12, 2018 at 02:09:05PM +0530, Amit Kucheria wrote:
> The TSENS block inside the 8996 is internally classified as version 2 of
> the IP. Several other SoC families use this block and can share this code.
>
> We rename get_temp() to reflect that it can be used across the v2 family.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> drivers/thermal/qcom/Makefile | 2 +-
> drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} | 25 ++++++++---------------
> 2 files changed, 9 insertions(+), 18 deletions(-)
> rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (66%)
>
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index 2cc2193..a821929 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,2 +1,2 @@
> obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
> -qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
> +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
> diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-v2.c
> similarity index 66%
> rename from drivers/thermal/qcom/tsens-8996.c
> rename to drivers/thermal/qcom/tsens-v2.c
> index 3e60cec..44d3736 100644
> --- a/drivers/thermal/qcom/tsens-8996.c
> +++ b/drivers/thermal/qcom/tsens-v2.c
> @@ -1,27 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0
> /*
> * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 and
> - * only version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> + * Copyright (c) 2018, Linaro Limited
> */
>
> -#include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include "tsens.h"
>
> -#define STATUS_OFFSET 0xa0
> -#define LAST_TEMP_MASK 0xfff
> +#define STATUS_OFFSET 0xa0
> +#define LAST_TEMP_MASK 0xfff
> #define STATUS_VALID_BIT BIT(21)
> #define CODE_SIGN_BIT BIT(11)
>
> -static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
> +static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
> {
> struct tsens_sensor *s = &tmdev->sensor[id];
> u32 code;
> @@ -73,12 +64,12 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
> return 0;
> }
>
> -static const struct tsens_ops ops_8996 = {
> +static const struct tsens_ops ops_generic_v2 = {
> .init = init_common,
> - .get_temp = get_temp_8996,
> + .get_temp = get_temp_tsens_v2,
> };
>
> const struct tsens_data data_8996 = {
> .num_sensors = 13,
> - .ops = &ops_8996,
> + .ops = &ops_generic_v2,
> };
nit: the unrelated cleanup (SPDX identifier, removal of header,
indendation fixes) could have been done in a separate patch. This
patch is small enough though that it doesn't add too much
distraction and one could argue that this patch creates a new
file ;-)
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
next prev parent reply other threads:[~2018-07-17 23:54 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-12 8:39 [PATCH v7 0/7] thermal: tsens: Refactoring for TSENSv2 IP Amit Kucheria
2018-07-12 8:39 ` [PATCH v7 1/7] thermal: tsens: Get rid of unused fields in structure Amit Kucheria
2018-07-12 8:39 ` [PATCH v7 2/7] thermal: tsens: Add support to split up register address space into two Amit Kucheria
2018-07-12 17:12 ` Doug Anderson
2018-07-17 23:29 ` Matthias Kaehlcke
2018-07-18 3:42 ` Amit Kucheria
2018-07-12 8:39 ` [PATCH v7 3/7] arm64: dts: msm8996: thermal: Initialise via DT and add second controller Amit Kucheria
2018-07-12 17:14 ` Doug Anderson
2018-07-17 23:42 ` Matthias Kaehlcke
2018-07-17 23:55 ` Doug Anderson
2018-07-17 23:58 ` Matthias Kaehlcke
2018-07-12 8:39 ` [PATCH v7 4/7] thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse Amit Kucheria
2018-07-12 17:19 ` Doug Anderson
2018-07-17 23:54 ` Matthias Kaehlcke [this message]
2018-07-12 8:39 ` [PATCH v7 5/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP Amit Kucheria
2018-07-12 17:15 ` Doug Anderson
2018-07-18 0:09 ` Matthias Kaehlcke
2018-07-18 6:42 ` Amit Kucheria
2018-07-12 8:39 ` [PATCH v7 6/7] thermal: tsens: Add generic support for TSENS v2 IP Amit Kucheria
2018-07-12 17:16 ` Doug Anderson
2018-07-12 8:39 ` [PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes Amit Kucheria
2018-07-12 17:18 ` Doug Anderson
2018-07-18 0:15 ` Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180717235423.GE129942@google.com \
--to=mka@chromium.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=dianders@chromium.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=rui.zhang@intel.com \
--cc=smohanad@codeaurora.org \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox