From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Jonas Gorski <jonas.gorski@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Amit Pundir <amit.pundir@linaro.org>
Subject: [PATCH 3.18 13/29] bcm63xx_enet: correct clock usage
Date: Fri, 20 Jul 2018 14:11:08 +0200 [thread overview]
Message-ID: <20180720115159.456411805@linuxfoundation.org> (raw)
In-Reply-To: <20180720115158.974693829@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <jonas.gorski@gmail.com>
commit 9c86b846ce02f7e35d7234cf090b80553eba5389 upstream.
Check the return code of prepare_enable and change one last instance of
enable only to prepare_enable. Also properly disable and release the
clock in error paths and on remove for enetsw.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 31 ++++++++++++++++++++-------
1 file changed, 23 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1788,7 +1788,9 @@ static int bcm_enet_probe(struct platfor
ret = PTR_ERR(priv->mac_clk);
goto out;
}
- clk_prepare_enable(priv->mac_clk);
+ ret = clk_prepare_enable(priv->mac_clk);
+ if (ret)
+ goto out_put_clk_mac;
/* initialize default and fetch platform data */
priv->rx_ring_size = BCMENET_DEF_RX_DESC;
@@ -1820,9 +1822,11 @@ static int bcm_enet_probe(struct platfor
if (IS_ERR(priv->phy_clk)) {
ret = PTR_ERR(priv->phy_clk);
priv->phy_clk = NULL;
- goto out_put_clk_mac;
+ goto out_disable_clk_mac;
}
- clk_prepare_enable(priv->phy_clk);
+ ret = clk_prepare_enable(priv->phy_clk);
+ if (ret)
+ goto out_put_clk_phy;
}
/* do minimal hardware init to be able to probe mii bus */
@@ -1922,13 +1926,16 @@ out_free_mdio:
out_uninit_hw:
/* turn off mdc clock */
enet_writel(priv, 0, ENET_MIISC_REG);
- if (priv->phy_clk) {
+ if (priv->phy_clk)
clk_disable_unprepare(priv->phy_clk);
+
+out_put_clk_phy:
+ if (priv->phy_clk)
clk_put(priv->phy_clk);
- }
-out_put_clk_mac:
+out_disable_clk_mac:
clk_disable_unprepare(priv->mac_clk);
+out_put_clk_mac:
clk_put(priv->mac_clk);
out:
free_netdev(dev);
@@ -2769,7 +2776,9 @@ static int bcm_enetsw_probe(struct platf
ret = PTR_ERR(priv->mac_clk);
goto out_unmap;
}
- clk_enable(priv->mac_clk);
+ ret = clk_prepare_enable(priv->mac_clk);
+ if (ret)
+ goto out_put_clk;
priv->rx_chan = 0;
priv->tx_chan = 1;
@@ -2790,7 +2799,7 @@ static int bcm_enetsw_probe(struct platf
ret = register_netdev(dev);
if (ret)
- goto out_put_clk;
+ goto out_disable_clk;
netif_carrier_off(dev);
platform_set_drvdata(pdev, dev);
@@ -2799,6 +2808,9 @@ static int bcm_enetsw_probe(struct platf
return 0;
+out_disable_clk:
+ clk_disable_unprepare(priv->mac_clk);
+
out_put_clk:
clk_put(priv->mac_clk);
@@ -2830,6 +2842,9 @@ static int bcm_enetsw_remove(struct plat
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
+ clk_disable_unprepare(priv->mac_clk);
+ clk_put(priv->mac_clk);
+
free_netdev(dev);
return 0;
}
next prev parent reply other threads:[~2018-07-20 12:25 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 12:10 [PATCH 3.18 00/29] 3.18.116-stable review Greg Kroah-Hartman
2018-07-20 12:10 ` [PATCH 3.18 01/29] ibmasm: dont write out of bounds in read handler Greg Kroah-Hartman
2018-07-20 12:10 ` [PATCH 3.18 02/29] USB: serial: keyspan_pda: fix modem-status error handling Greg Kroah-Hartman
2018-07-20 12:10 ` [PATCH 3.18 03/29] USB: yurex: fix out-of-bounds uaccess in read handler Greg Kroah-Hartman
2018-07-20 12:10 ` [PATCH 3.18 04/29] USB: serial: mos7840: fix status-register error handling Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 05/29] usb: quirks: add delay quirks for Corsair Strafe Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 06/29] xhci: xhci-mem: off by one in xhci_stream_id_to_ring() Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 07/29] Fix up non-directory creation in SGID directories Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 08/29] netfilter: x_tables: initialise match/target check parameter struct Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 09/29] loop: add recursion validation to LOOP_CHANGE_FD Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 10/29] PM / hibernate: Fix oops at snapshot_write() Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 11/29] RDMA/ucm: Mark UCM interface as BROKEN Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 12/29] loop: remember whether sysfs_create_group() was done Greg Kroah-Hartman
2018-07-20 12:11 ` Greg Kroah-Hartman [this message]
2018-07-20 12:11 ` [PATCH 3.18 14/29] bcm63xx_enet: do not write to random DMA channel on BCM6345 Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 15/29] crypto: crypto4xx - remove bad list_del Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 16/29] crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 17/29] net: dccp: avoid crash in ccid3_hc_rx_send_feedback() Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 18/29] net: dccp: switch rx_tstamp_last_feedback to monotonic clock Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 19/29] net/mlx5: Fix incorrect raw command length parsing Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 20/29] net: sungem: fix rx checksum support Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 21/29] tcp: fix Fast Open key endianness Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 23/29] vhost_net: validate sock before trying to put its fd Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 24/29] net_sched: blackhole: tell upper qdisc about dropped packets Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 25/29] net/mlx5: Fix command interface race in polling mode Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 26/29] netfilter: ebtables: reject non-bridge targets Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 27/29] KEYS: DNS: fix parsing multiple options Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 28/29] rds: avoid unenecessary cong_update in loop transport Greg Kroah-Hartman
2018-07-20 12:11 ` [PATCH 3.18 29/29] net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL Greg Kroah-Hartman
2018-07-20 13:33 ` [PATCH 3.18 00/29] 3.18.116-stable review Nathan Chancellor
2018-07-21 13:38 ` Guenter Roeck
2018-07-22 11:42 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720115159.456411805@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=amit.pundir@linaro.org \
--cc=davem@davemloft.net \
--cc=jonas.gorski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).