From: "Andrew F. Davis" <afd@ti.com>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
NXP Linux Team <linux-imx@nxp.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, "Andrew F . Davis" <afd@ti.com>
Subject: [PATCH v2 2/2] ARM: dts: imx: Use new CODEC reset pin name
Date: Tue, 4 Sep 2018 09:20:18 -0500 [thread overview]
Message-ID: <20180904142018.4267-2-afd@ti.com> (raw)
In-Reply-To: <20180904142018.4267-1-afd@ti.com>
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name use this here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
Changes from v1:
- Remove "fix" from commit message
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 368132274a91..ddabab168a8a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -310,7 +310,7 @@
tlv320aic3105: codec@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
- gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_CKO>;
ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
/* Regulators */
--
2.18.0
next prev parent reply other threads:[~2018-09-04 14:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 14:20 [PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name Andrew F. Davis
2018-09-04 14:20 ` Andrew F. Davis [this message]
2018-09-10 0:48 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180904142018.4267-2-afd@ti.com \
--to=afd@ti.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox