* [PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name
@ 2018-09-04 14:20 Andrew F. Davis
2018-09-04 14:20 ` [PATCH v2 2/2] ARM: dts: imx: " Andrew F. Davis
2018-09-10 0:48 ` [PATCH v2 1/2] ARM: dts: imx6: RDU2: " Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Andrew F. Davis @ 2018-09-04 14:20 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team
Cc: linux-arm-kernel, linux-kernel, Andrew F . Davis
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name use this here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
Changes from v1:
- Remove "fix" from commit message
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7fff3717cf7c..a0f5cfda0055 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -384,7 +384,7 @@
AVDD-supply = <®_3p3v>;
IOVDD-supply = <®_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
accel@1c {
@@ -572,7 +572,7 @@
AVDD-supply = <®_3p3v>;
IOVDD-supply = <®_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
touchscreen@20 {
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 2/2] ARM: dts: imx: Use new CODEC reset pin name
2018-09-04 14:20 [PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name Andrew F. Davis
@ 2018-09-04 14:20 ` Andrew F. Davis
2018-09-10 0:48 ` [PATCH v2 1/2] ARM: dts: imx6: RDU2: " Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Andrew F. Davis @ 2018-09-04 14:20 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team
Cc: linux-arm-kernel, linux-kernel, Andrew F . Davis
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name use this here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
Changes from v1:
- Remove "fix" from commit message
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 368132274a91..ddabab168a8a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -310,7 +310,7 @@
tlv320aic3105: codec@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
- gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_CKO>;
ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
/* Regulators */
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name
2018-09-04 14:20 [PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name Andrew F. Davis
2018-09-04 14:20 ` [PATCH v2 2/2] ARM: dts: imx: " Andrew F. Davis
@ 2018-09-10 0:48 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2018-09-10 0:48 UTC (permalink / raw)
To: Andrew F. Davis
Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, linux-arm-kernel, linux-kernel
On Tue, Sep 04, 2018 at 09:20:17AM -0500, Andrew F. Davis wrote:
> The correct DT property for specifying a GPIO used for reset
> is "reset-gpios", the driver now accepts this name use this here.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>
> Changes from v1:
> - Remove "fix" from commit message
>
> arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> index 7fff3717cf7c..a0f5cfda0055 100644
> --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> @@ -384,7 +384,7 @@
> AVDD-supply = <®_3p3v>;
> IOVDD-supply = <®_3p3v>;
> DVDD-supply = <&vgen4_reg>;
> - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
Is it intended to change the polarity?
Shawn
> };
>
> accel@1c {
> @@ -572,7 +572,7 @@
> AVDD-supply = <®_3p3v>;
> IOVDD-supply = <®_3p3v>;
> DVDD-supply = <&vgen4_reg>;
> - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> };
>
> touchscreen@20 {
> --
> 2.18.0
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-09-10 3:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-09-04 14:20 [PATCH v2 1/2] ARM: dts: imx6: RDU2: Use new CODEC reset pin name Andrew F. Davis
2018-09-04 14:20 ` [PATCH v2 2/2] ARM: dts: imx: " Andrew F. Davis
2018-09-10 0:48 ` [PATCH v2 1/2] ARM: dts: imx6: RDU2: " Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox