From: Shawn Guo <shawnguo@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Li Yang <leoyang.li@nxp.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes
Date: Mon, 10 Sep 2018 08:39:47 +0800 [thread overview]
Message-ID: <20180910003946.GE21218@dragon> (raw)
In-Reply-To: <20180903140840.23648-1-alexandre.belloni@bootlin.com>
The series looks good to me. @Leo, what about you?
Shawn
On Mon, Sep 03, 2018 at 04:08:36PM +0200, Alexandre Belloni wrote:
> Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
> arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
> arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> index c7b8d2c009cd..af972e91d6bc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> @@ -136,7 +136,7 @@
> bus-num = <0>;
> status = "okay";
>
> - qflash0: s25fl128s@0 {
> + qflash0: flash@0 {
> compatible = "spansion,m25p80";
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> index e69306e6b0b1..219068220b84 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
> @@ -165,7 +165,7 @@
> bus-num = <0>;
> status = "okay";
>
> - qflash0: s25fl128s@0 {
> + qflash0: flash@0 {
> compatible = "spansion,m25p80";
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> index 440e111651d5..df676b30357b 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> @@ -103,7 +103,7 @@
> bus-num = <0>;
> status = "okay";
>
> - qflash0: s25fs512s@0 {
> + qflash0: flash@0 {
> compatible = "spansion,m25p80";
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -111,7 +111,7 @@
> reg = <0>;
> };
>
> - qflash1: s25fs512s@1 {
> + qflash1: flash@1 {
> compatible = "spansion,m25p80";
> #address-cells = <1>;
> #size-cells = <1>;
> --
> 2.19.0.rc1
>
next prev parent reply other threads:[~2018-09-10 3:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-03 14:08 [PATCH v2 1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes Alexandre Belloni
2018-09-03 14:08 ` [PATCH v2 2/5] arm64: dts: fsl: ls1046a: disable the flash controller by default Alexandre Belloni
2018-09-03 14:08 ` [PATCH v2 3/5] arm64: dts: fsl: ls1046a: disable uarts " Alexandre Belloni
2018-09-03 14:08 ` [PATCH v2 4/5] dt-bindings: Add vendor prefix for Microsys Alexandre Belloni
2018-09-10 0:38 ` Shawn Guo, Rob Herring
2018-09-10 7:54 ` Alexandre Belloni
2018-09-03 14:08 ` [PATCH v2 5/5] arm64: dts: add Microsys MPX-LS1046A SoM and SBC-LS1046A SBC Alexandre Belloni
2018-09-10 0:39 ` Shawn Guo [this message]
2018-09-10 5:56 ` [PATCH v2 1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180910003946.GE21218@dragon \
--to=shawnguo@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox