[PATCH v3] usb: typec: get the vbus source and charge values from the devicetree

["Angus Ainslie (Purism)" <angus@akkea.ca>]

If the board is being powered by USB disabling the source and sink
can remove power from the board. Allow the source and sink to be
initallized based on devicetree values.

Changed since V2:

Change the devicetree documentation.
Change the devicetree property names.

Changed since V1:

use devicetree values instead of hardcoded initialization.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
---
 .../devicetree/bindings/usb/typec-tcpci.txt        |  6 ++++++
 drivers/usb/typec/tcpm.c                           | 14 +++++++++++---
 2 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
index 0dd1469e7318..b07418ae6482 100644
--- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
@@ -15,6 +15,12 @@ Required sub-node:
   of connector node are specified in
   Documentation/devicetree/bindings/connector/usb-connector.txt
 
+Optional properties for usb-c-connector sub-node:
+- init-vbus-source: set the initalization value for vbus-source to true.
+  If this property is not present the initial value will be false.
+- init-vbus-sink: set the initalization value for vbus-sink to true.
+  If this property is not present the initial value will be false.
+
 Example:
 
 ptn5110@50 {
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
index ca7bedb46f7f..10c14ece3858 100644
--- a/drivers/usb/typec/tcpm.c
+++ b/drivers/usb/typec/tcpm.c
@@ -2462,9 +2462,7 @@ static int tcpm_init_vbus(struct tcpm_port *port)
 {
 	int ret;
 
-	ret = port->tcpc->set_vbus(port->tcpc, false, false);
-	port->vbus_source = false;
-	port->vbus_charge = false;
+	ret = port->tcpc->set_vbus(port->tcpc, port->vbus_source, port->vbus_charge);
 	return ret;
 }
 
@@ -4266,6 +4264,16 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
 		return -EINVAL;
 	port->port_type = port->typec_caps.type;
 
+	if (fwnode_property_present(fwnode, "init-vbus-source"))
+		port->vbus_source = true;
+	else
+		port->vbus_source = false;
+
+	if (fwnode_property_present(fwnode, "init-vbus-sink"))
+	        port->vbus_charge = true;
+	else
+	        port->vbus_charge = false;
+
 	if (port->port_type == TYPEC_PORT_SNK)
 		goto sink;
 
-- 
2.17.1