From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org,
Balakrishna Godavarthi <bgodavar@codeaurora.org>,
Harish Bandi <c-hbandi@codeaurora.org>
Subject: [PATCH v1] Bluetooth: hci_qca: Add support for controller debug logs.
Date: Mon, 1 Oct 2018 19:21:02 +0530 [thread overview]
Message-ID: <20181001135102.17453-1-bgodavar@codeaurora.org> (raw)
This patch will prevent error messages splashing on console.
[ 78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[ 78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[ 78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[ 78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
QCA wcn3990 will send the debug logs in the form of ACL packets.
While decoding packet in qca_recv(), marking the received debug log
packet as diagnostic packet.
Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d98ed0442201..a00910aaed54 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -63,6 +63,10 @@
/* susclk rate */
#define SUSCLK_RATE_32KHZ 32768
+/* Controller debug log header */
+#define QCA_DEBUG_HDR_MSB 0xDC
+#define QCA_DEBUG_HDR_LSB 0x2E
+
/* HCI_IBS transmit side sleep protocol states */
enum tx_ibs_states {
HCI_IBS_TX_ASLEEP,
@@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
+static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ /* We receive debug logs from chip as an ACL packets.
+ * Instead of sending the data to ACL to decode the
+ * received data, we are pushing them to the above layers
+ * as a diagnostic packet.
+ */
+ if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
+ (skb->data[1] == QCA_DEBUG_HDR_LSB))
+ return hci_recv_diag(hdev, skb);
+ else
+ return hci_recv_frame(hdev, skb);
+}
+
#define QCA_IBS_SLEEP_IND_EVENT \
.type = HCI_IBS_SLEEP_IND, \
.hlen = 0, \
@@ -870,13 +888,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
.lsize = 0, \
.maxlen = HCI_MAX_IBS_SIZE
+#define QCA_RECV_ACL_DATA \
+ .type = HCI_ACLDATA_PKT, \
+ .hlen = HCI_ACL_HDR_SIZE, \
+ .loff = 2, \
+ .lsize = 2, \
+ .maxlen = HCI_MAX_FRAME_SIZE
+
static const struct h4_recv_pkt qca_recv_pkts[] = {
- { H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = hci_recv_frame },
{ QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
{ QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
{ QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
+ { QCA_RECV_ACL_DATA, .recv = qca_recv_acl_data },
};
static int qca_recv(struct hci_uart *hu, const void *data, int count)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2018-10-01 13:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-01 13:51 Balakrishna Godavarthi [this message]
2018-10-01 19:48 ` [PATCH v1] Bluetooth: hci_qca: Add support for controller debug logs Matthias Kaehlcke
2018-10-02 7:32 ` Balakrishna Godavarthi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181001135102.17453-1-bgodavar@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=c-hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox