From: Badhri Jagan Sridharan <badhri@google.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Andrzej Hajda <a.hajda@samsung.com>, Li Jun <jun.li@nxp.com>,
linux@roeck-us.net, jackp@codeaurora.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org,
Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v3 1/3] dt-bindings: connector: Add self-powered property
Date: Mon, 1 Oct 2018 12:44:59 -0700 [thread overview]
Message-ID: <20181001194501.58338-1-badhri@google.com> (raw)
From USB_PD_R3_0
7.1.5 Response to Hard Resets
Device operation during and after a Hard Reset is defined as follows:
Self-powered devices Should Not disconnect from USB during a Hard Reset
(see Section 9.1.2).
Bus powered devices will disconnect from USB during a Hard Reset due to the
loss of their power source.
Therefore it is necessary to know whether the port belongs to
a device which is self powered or bus powered. This change
adds "self-powered" flag to the connector class which present indicates
that the port belongs to a device that is self powered. Else it is
bus powered usb device.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
-------
Changes is v3:
- Rebase on top of usb-next
- no change w.r.t to this patch. Same as previous versions.
No v2 version as the patch was introduced there.
---
Documentation/devicetree/bindings/connector/usb-connector.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
index d90e17e2428b..a9a2f2fc44f2 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
@@ -14,6 +14,8 @@ Optional properties:
- label: symbolic name for the connector,
- type: size of the connector, should be specified in case of USB-A, USB-B
non-fullsize connectors: "mini", "micro".
+- self-powered: Set this property if the usb device that has its own power
+ source.
Optional properties for usb-c-connector:
- power-role: should be one of "source", "sink" or "dual"(DRP) if typec
--
2.19.0.605.g01d371f741-goog
next reply other threads:[~2018-10-01 19:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-01 19:44 Badhri Jagan Sridharan [this message]
2018-10-01 19:45 ` [PATCH v3 2/3] usb: typec: tcpm: Do not disconnect link for self powered devices Badhri Jagan Sridharan
2018-11-02 13:28 ` Heikki Krogerus
2018-10-01 19:45 ` [PATCH v3 3/3] usb: typec: tcpm: charge current handling for sink during hard reset Badhri Jagan Sridharan
2018-10-12 14:48 ` Rob Herring
2018-11-02 13:28 ` Heikki Krogerus
2018-11-06 0:15 ` Badhri Jagan Sridharan
2018-11-06 9:10 ` Heikki Krogerus
2018-11-02 13:27 ` [PATCH v3 1/3] dt-bindings: connector: Add self-powered property Heikki Krogerus
2018-11-02 13:44 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181001194501.58338-1-badhri@google.com \
--to=badhri@google.com \
--cc=a.hajda@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jackp@codeaurora.org \
--cc=jun.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox