From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>,
Johannes Stezenbach <js@sig21.net>,
Carlo Caione <carlo@endlessm.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <alexander.levin@microsoft.com>
Subject: [PATCH AUTOSEL 4.14 20/23] clk: x86: Stop marking clocks as CLK_IS_CRITICAL
Date: Fri, 5 Oct 2018 12:16:31 -0400 [thread overview]
Message-ID: <20181005161634.20631-20-sashal@kernel.org> (raw)
In-Reply-To: <20181005161634.20631-1-sashal@kernel.org>
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 648e921888ad96ea3dc922739e96716ad3225d7f ]
Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the
firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes
all unclaimed PMC clocks on Cherry Trail devices to be on all the time,
resulting on the device not being able to reach S0i3 when suspended.
The reason for this commit is that on some Bay Trail / Cherry Trail devices
the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom
driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver
has been modified to get and enable this clock (if present) the marking of
the clocks as CLK_IS_CRITICAL is no longer necessary.
This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail
devices not being able to reach S0i3 greatly decreasing their battery
drain when suspended.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/clk/x86/clk-pmc-atom.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/clk/x86/clk-pmc-atom.c b/drivers/clk/x86/clk-pmc-atom.c
index 75151901ff7d..d977193842df 100644
--- a/drivers/clk/x86/clk-pmc-atom.c
+++ b/drivers/clk/x86/clk-pmc-atom.c
@@ -187,13 +187,6 @@ static struct clk_plt *plt_clk_register(struct platform_device *pdev, int id,
pclk->reg = base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE;
spin_lock_init(&pclk->lock);
- /*
- * If the clock was already enabled by the firmware mark it as critical
- * to avoid it being gated by the clock framework if no driver owns it.
- */
- if (plt_clk_is_enabled(&pclk->hw))
- init.flags |= CLK_IS_CRITICAL;
-
ret = devm_clk_hw_register(&pdev->dev, &pclk->hw);
if (ret) {
pclk = ERR_PTR(ret);
--
2.17.1
next prev parent reply other threads:[~2018-10-05 16:22 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 16:16 [PATCH AUTOSEL 4.14 01/23] ASoC: rt5514: Fix the issue of the delay volume applied again Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 02/23] ASoC: wm8804: Add ACPI support Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 03/23] ASoC: sigmadsp: safeload should not have lower byte limit Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 04/23] selftests/efivarfs: add required kernel configs Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 05/23] selftests: memory-hotplug: add required configs Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 06/23] ASoC: rsnd: adg: care clock-frequency size Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 07/23] ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 08/23] Bluetooth: hci_ldisc: Free rw_semaphore on close Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 09/23] mfd: omap-usb-host: Fix dts probe of children Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 10/23] scsi: iscsi: target: Don't use stack buffer for scatterlist Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 11/23] scsi: qla2xxx: Fix an endian bug in fcpcmd_is_corrupted() Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 12/23] sound: enable interrupt after dma buffer initialization Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 13/23] sound: don't call skl_init_chip() to reset intel skl soc Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 14/23] hv_netvsc: fix schedule in RCU context Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 15/23] stmmac: fix valid numbers of unicast filter entries Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 16/23] net: macb: disable scatter-gather for macb on sama5d3 Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 17/23] ARM: dts: at91: add new compatibility string " Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 18/23] PCI: hv: support reporting serial number as slot information Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 19/23] clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail Sasha Levin
2018-10-05 16:16 ` Sasha Levin [this message]
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 21/23] x86/kvm/lapic: always disable MMIO interface in x2APIC mode Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 22/23] drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 Sasha Levin
2018-10-05 16:16 ` [PATCH AUTOSEL 4.14 23/23] ubifs: Check for name being NULL while mounting Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181005161634.20631-20-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexander.levin@microsoft.com \
--cc=carlo@endlessm.com \
--cc=davem@davemloft.net \
--cc=hdegoede@redhat.com \
--cc=js@sig21.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox