From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Wen Xiong <wenxiong@linux.vnet.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Sasha Levin <alexander.levin@microsoft.com>
Subject: [PATCH AUTOSEL 4.14 24/32] scsi: ipr: System hung while dlpar adding primary ipr adapter back
Date: Mon, 8 Oct 2018 11:26:21 -0400 [thread overview]
Message-ID: <20181008152629.70812-24-sashal@kernel.org> (raw)
In-Reply-To: <20181008152629.70812-1-sashal@kernel.org>
From: Wen Xiong <wenxiong@linux.vnet.ibm.com>
[ Upstream commit 318ddb34b2052f838aa243d07173e2badf3e630e ]
While dlpar adding primary ipr adapter back, driver goes through adapter
initialization then schedule ipr_worker_thread to start te disk scan by
dropping the host lock, calling scsi_add_device. Then get the adapter reset
request again, so driver does scsi_block_requests, this will cause the
scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread
to do the unblock because its stuck in scsi_add_device.
This patch fixes the issue.
[mkp: typo and whitespace fixes]
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/scsi/ipr.c | 106 ++++++++++++++++++++++++++-------------------
drivers/scsi/ipr.h | 1 +
2 files changed, 62 insertions(+), 45 deletions(-)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index f838bd73befa..35d54ee1c5c7 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3308,6 +3308,65 @@ static void ipr_release_dump(struct kref *kref)
LEAVE;
}
+static void ipr_add_remove_thread(struct work_struct *work)
+{
+ unsigned long lock_flags;
+ struct ipr_resource_entry *res;
+ struct scsi_device *sdev;
+ struct ipr_ioa_cfg *ioa_cfg =
+ container_of(work, struct ipr_ioa_cfg, scsi_add_work_q);
+ u8 bus, target, lun;
+ int did_work;
+
+ ENTER;
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+
+restart:
+ do {
+ did_work = 0;
+ if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) {
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ return;
+ }
+
+ list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
+ if (res->del_from_ml && res->sdev) {
+ did_work = 1;
+ sdev = res->sdev;
+ if (!scsi_device_get(sdev)) {
+ if (!res->add_to_ml)
+ list_move_tail(&res->queue, &ioa_cfg->free_res_q);
+ else
+ res->del_from_ml = 0;
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+ }
+ break;
+ }
+ }
+ } while (did_work);
+
+ list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
+ if (res->add_to_ml) {
+ bus = res->bus;
+ target = res->target;
+ lun = res->lun;
+ res->add_to_ml = 0;
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ scsi_add_device(ioa_cfg->host, bus, target, lun);
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+ goto restart;
+ }
+ }
+
+ ioa_cfg->scan_done = 1;
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE);
+ LEAVE;
+}
+
/**
* ipr_worker_thread - Worker thread
* @work: ioa config struct
@@ -3322,13 +3381,9 @@ static void ipr_release_dump(struct kref *kref)
static void ipr_worker_thread(struct work_struct *work)
{
unsigned long lock_flags;
- struct ipr_resource_entry *res;
- struct scsi_device *sdev;
struct ipr_dump *dump;
struct ipr_ioa_cfg *ioa_cfg =
container_of(work, struct ipr_ioa_cfg, work_q);
- u8 bus, target, lun;
- int did_work;
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
@@ -3366,49 +3421,9 @@ static void ipr_worker_thread(struct work_struct *work)
return;
}
-restart:
- do {
- did_work = 0;
- if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) {
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- return;
- }
+ schedule_work(&ioa_cfg->scsi_add_work_q);
- list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
- if (res->del_from_ml && res->sdev) {
- did_work = 1;
- sdev = res->sdev;
- if (!scsi_device_get(sdev)) {
- if (!res->add_to_ml)
- list_move_tail(&res->queue, &ioa_cfg->free_res_q);
- else
- res->del_from_ml = 0;
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
- }
- break;
- }
- }
- } while (did_work);
-
- list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
- if (res->add_to_ml) {
- bus = res->bus;
- target = res->target;
- lun = res->lun;
- res->add_to_ml = 0;
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- scsi_add_device(ioa_cfg->host, bus, target, lun);
- spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
- goto restart;
- }
- }
-
- ioa_cfg->scan_done = 1;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE);
LEAVE;
}
@@ -9937,6 +9952,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
INIT_LIST_HEAD(&ioa_cfg->free_res_q);
INIT_LIST_HEAD(&ioa_cfg->used_res_q);
INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread);
+ INIT_WORK(&ioa_cfg->scsi_add_work_q, ipr_add_remove_thread);
init_waitqueue_head(&ioa_cfg->reset_wait_q);
init_waitqueue_head(&ioa_cfg->msi_wait_q);
init_waitqueue_head(&ioa_cfg->eeh_wait_q);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index c7f0e9e3cd7d..085e6c90f9e6 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1568,6 +1568,7 @@ struct ipr_ioa_cfg {
u8 saved_mode_page_len;
struct work_struct work_q;
+ struct work_struct scsi_add_work_q;
struct workqueue_struct *reset_work_q;
wait_queue_head_t reset_wait_q;
--
2.17.1
next prev parent reply other threads:[~2018-10-08 15:26 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-08 15:25 [PATCH AUTOSEL 4.14 01/32] media: af9035: prevent buffer overflow on write Sasha Levin
2018-10-08 15:25 ` [PATCH AUTOSEL 4.14 02/32] batman-adv: Avoid probe ELP information leak Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 03/32] batman-adv: Fix segfault when writing to throughput_override Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 04/32] batman-adv: Fix segfault when writing to sysfs elp_interval Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 05/32] batman-adv: Prevent duplicated gateway_node entry Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 06/32] batman-adv: Prevent duplicated nc_node entry Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 07/32] batman-adv: Prevent duplicated softif_vlan entry Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 08/32] batman-adv: Prevent duplicated global TT entry Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 09/32] batman-adv: Prevent duplicated tvlv handler Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 10/32] batman-adv: fix backbone_gw refcount on queue_work() failure Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 11/32] batman-adv: fix hardif_neigh " Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 12/32] clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 13/32] ucma: fix a use-after-free in ucma_resolve_ip() Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 14/32] scsi: ibmvscsis: Fix a stringop-overflow warning Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 15/32] scsi: ibmvscsis: Ensure partition name is properly NUL terminated Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 16/32] intel_th: pci: Add Ice Lake PCH support Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 17/32] Input: atakbd - fix Atari keymap Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 18/32] Input: atakbd - fix Atari CapsLock behaviour Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 19/32] net: emac: fix fixed-link setup for the RTL8363SB switch Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 20/32] ravb: do not write 1 to reserved bits Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 21/32] bnxt_en: don't try to offload VLAN 'modify' action Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 22/32] PCI: dwc: Fix scheduling while atomic issues Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 23/32] drm: mali-dp: Call drm_crtc_vblank_reset on device init Sasha Levin
2018-10-08 15:26 ` Sasha Levin [this message]
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 25/32] scsi: sd: don't crash the host on invalid commands Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 26/32] net/mlx4: Use cpumask_available for eq->affinity_mask Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 27/32] clocksource/drivers/fttmr010: Fix set_next_event handler Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 28/32] net: aquantia: memory corruption on jumbo frames Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 29/32] RISC-V: include linux/ftrace.h in asm-prototypes.h Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 30/32] powerpc/tm: Fix userspace r13 corruption Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 31/32] powerpc/tm: Avoid possible userspace r1 corruption on reclaim Sasha Levin
2018-10-08 15:26 ` [PATCH AUTOSEL 4.14 32/32] iommu/amd: Return devid as alias for ACPI HID devices Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181008152629.70812-24-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexander.levin@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stable@vger.kernel.org \
--cc=wenxiong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox