[PATCH 5/7] tty: Fix spacing between kernel-doc sections

["Tobin C. Harding" <tobin@kernel.org>]

There is a specified spacing for kernel-doc layout in
Documentation/doc-guide/kernel-doc.rst we should try to adhere to it as
much as possible.

Fix spacing between sections.

Signed-off-by: Tobin C. Harding <tobin@kernel.org>
---
 drivers/tty/n_hdlc.c              | 2 ++
 drivers/tty/serial/serial-tegra.c | 2 --
 drivers/tty/serial/uartlite.c     | 5 +----
 drivers/tty/tty_buffer.c          | 1 +
 drivers/tty/tty_port.c            | 2 --
 5 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 4b7aaf9ee09c..5b0c776a43a2 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -794,6 +794,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
  *
  * Determine which operations (read/write) will not block and return info
  * to caller.
+ *
  * Returns a bit mask containing info on which ops will not block.
  */
 static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
@@ -918,6 +919,7 @@ static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list,
  *
  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
  * list.
+ *
  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
  */
 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 872f3b2ed196..cb240a899127 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -74,7 +74,6 @@
 
 /**
  * tegra_uart_chip_data: SOC specific data.
- *
  * @tx_fifo_full_status: Status flag available for checking tx fifo full.
  * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not.
  *			Tegra30 does not allow this.
@@ -220,7 +219,6 @@ static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
 
 /**
  * tegra_uart_wait_cycle_time() - Wait for N UART clock periods
- *
  * @tup:	Tegra serial port data structure.
  * @cycles:	Number of clock periods to wait.
  *
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 94a91748da40..718d3bbd002d 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -605,7 +605,6 @@ static struct uart_driver ulite_uart_driver = {
 
 /**
  * ulite_assign() - register a uartlite device with the driver
- *
  * @dev: pointer to device structure
  * @id: requested id number.  Pass -1 for automatic port assignment
  * @base: base address of uartlite registers
@@ -687,7 +686,6 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
 
 /**
  * ulite_release() - register a uartlite device with the driver
- *
  * @dev: pointer to device structure
  */
 static int ulite_release(struct device *dev)
@@ -706,7 +704,6 @@ static int ulite_release(struct device *dev)
 
 /**
  * ulite_suspend() - Stop the device.
- *
  * @dev: handle to the device structure.
  * Return: 0 always.
  */
@@ -722,8 +719,8 @@ static int __maybe_unused ulite_suspend(struct device *dev)
 
 /**
  * ulite_resume() - Resume the device.
- *
  * @dev: handle to the device structure.
+ *
  * Return: 0 on success, errno otherwise.
  */
 static int __maybe_unused ulite_resume(struct device *dev)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bd08f2aa1da0..971795c7695f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -148,6 +148,7 @@ void tty_buffer_free_all(struct tty_port *port)
  * Allocate a new tty buffer to hold the desired number of characters.
  * We round our buffers off in 256 character chunks to get better
  * allocation behaviour.
+ *
  * Return NULL if out of memory or the allocation would exceed the
  * per device queue
  */
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 60927a52ec9c..d4dfe29a6348 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -363,7 +363,6 @@ EXPORT_SYMBOL(tty_port_hangup);
 
 /**
  * tty_port_tty_hangup() - helper to hang up a tty
- *
  * @port: tty port
  * @check_clocal: hang only ttys with CLOCAL unset?
  */
@@ -379,7 +378,6 @@ EXPORT_SYMBOL_GPL(tty_port_tty_hangup);
 
 /**
  * tty_port_tty_wakeup() - helper to wake up a tty
- *
  * @port: tty port
  */
 void tty_port_tty_wakeup(struct tty_port *port)
-- 
2.17.1