From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>,
Luca Coelho <luciano.coelho@intel.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 4.18 025/126] iwlwifi: mvm: clear HW_RESTART_REQUESTED when stopping the interface
Date: Wed, 31 Oct 2018 19:06:13 -0400 [thread overview]
Message-ID: <20181031230754.29029-25-sashal@kernel.org> (raw)
In-Reply-To: <20181031230754.29029-1-sashal@kernel.org>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[ Upstream commit 155f7e0441cd121b1e673d465a35e99f4b9b2f0b ]
Fix a bug that happens in the following scenario:
1) suspend without WoWLAN
2) mac80211 calls drv_stop because of the suspend
3) __iwl_mvm_mac_stop deallocates the aux station
4) during drv_stop the firmware crashes
5) iwlmvm:
* sets IWL_MVM_STATUS_HW_RESTART_REQUESTED
* asks mac80211 to kick the restart flow
6) mac80211 puts the restart worker into a freezable
queue which means that the worker will not run for now
since the workqueue is already frozen
7) ...
8) resume
9) mac80211 runs ieee80211_reconfig as part of the resume
10) mac80211 detects that a restart flow has been requested
and that we are now resuming from suspend and cancels
the restart worker
11) mac80211 calls drv_start()
12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED
clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls
iwl_mvm_restart_cleanup()
13) iwl_fw_error_dump gets called and accesses the device
to get debug data
14) iwl_mvm_up adds the aux station
15) iwl_mvm_add_aux_sta() allocates an internal station for
the aux station
16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART
and doesn't really allocate a station ID for the aux
station
17) a new queue is added for the aux station
Note that steps from 5 to 9 aren't really part of the
problem but were described for the sake of completeness.
Once the iwl_mvm_mac_stop() is called, the device is not
accessible, meaning that step 12) can't succeed and we'll
see the following:
drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]()
Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8)
Call Trace:
[<ffffffffc03e6ad3>] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]
[<ffffffffc03e6a13>] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi]
[<ffffffffc03dad42>] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi]
[<ffffffffc04bd43e>] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm]
[<ffffffffc04bd6d2>] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm]
[<ffffffffc042d378>] drv_start+0xa1/0xc5 [iwl7000_mac80211]
[<ffffffffc045a339>] ieee80211_reconfig+0x145/0xf50 [mac80211]
[<ffffffffc044788b>] ieee80211_resume+0x62/0x66 [mac80211]
[<ffffffffc0366c5b>] wiphy_resume+0xa9/0xc6 [cfg80211]
The station id of the aux station is set to 0xff in step 3
and because we don't really allocate a new station id for
the auxliary station (as explained in 16), we end up sending
a command to the firmware asking to connect the queue
to station id 0xff. This makes the firmware crash with the
following information:
0x00002093 | ADVANCED_SYSASSERT
0x000002F0 | trm_hw_status0
0x00000000 | trm_hw_status1
0x00000B38 | branchlink2
0x0001978C | interruptlink1
0x00000000 | interruptlink2
0xFF080501 | data1
0xDEADBEEF | data2
0xDEADBEEF | data3
Firmware error during reconfiguration - reprobe!
FW error in SYNC CMD SCD_QUEUE_CFG
Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED
in iwl_mvm_mac_stop(). We won't be able to collect debug
data anyway and when we will brought up again, we will
have a clean state from the firmware perspective.
Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in
step 12) we won't get to the 2093 ASSERT either.
Fixes: bf8b286f86fc ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index a6e072234398..da45dc972889 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1232,12 +1232,15 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
iwl_mvm_del_aux_sta(mvm);
/*
- * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete()
- * won't be called in this case).
+ * Clear IN_HW_RESTART and HW_RESTART_REQUESTED flag when stopping the
+ * hw (as restart_complete() won't be called in this case) and mac80211
+ * won't execute the restart.
* But make sure to cleanup interfaces that have gone down before/during
* HW restart was requested.
*/
- if (test_and_clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
+ if (test_and_clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) ||
+ test_and_clear_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED,
+ &mvm->status))
ieee80211_iterate_interfaces(mvm->hw, 0,
iwl_mvm_cleanup_iterator, mvm);
--
2.17.1
next prev parent reply other threads:[~2018-10-31 23:39 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 23:05 [PATCH AUTOSEL 4.18 001/126] net: socionext: Reset tx queue in ndo_stop Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 002/126] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 003/126] locking/lockdep: Fix debug_locks off performance problem Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 004/126] netfilter: xt_nat: fix DNAT target for shifted portmap ranges Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 005/126] ataflop: fix error handling during setup Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 006/126] swim: fix cleanup on setup error Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 007/126] arm64: cpufeature: ctr: Fix cpu capability check for late CPUs Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 008/126] nfp: devlink port split support for 1x100G CXP NIC Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 009/126] tun: Consistently configure generic netdev params via rtnetlink Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 010/126] s390/sthyi: Fix machine name validity indication Sasha Levin
2018-10-31 23:05 ` [PATCH AUTOSEL 4.18 011/126] hwmon: (pwm-fan) Set fan speed to 0 on suspend Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 012/126] lightnvm: pblk: fix race on sysfs line state Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 013/126] lightnvm: pblk: fix two sleep-in-atomic-context bugs Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 014/126] lightnvm: pblk: fix race condition on metadata I/O Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 015/126] spi: spi-ep93xx: Use dma_data_direction for ep93xx_spi_dma_{finish,prepare} Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 016/126] perf tools: Free temporary 'sys' string in read_event_files() Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 017/126] perf tools: Cleanup trace-event-info 'tdata' leak Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 018/126] perf strbuf: Match va_{add,copy} with va_end Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 019/126] cpupower: Fix coredump on VMWare Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 020/126] bcache: Populate writeback_rate_minimum attribute Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 021/126] mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01 Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 022/126] sdhci: acpi: add free_slot callback Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 023/126] mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 024/126] iwlwifi: pcie: avoid empty free RB queue Sasha Levin
2018-10-31 23:06 ` Sasha Levin [this message]
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 026/126] iwlwifi: mvm: check for n_profiles validity in EWRD ACPI Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 027/126] x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 028/126] nvmet-rdma: use a private workqueue for delete Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 029/126] ACPI/PPTT: Handle architecturally unknown cache types Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 030/126] ACPI / PM: LPIT: Register sysfs attributes based on FADT Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 031/126] ACPI / processor: Fix the return value of acpi_processor_ids_walk() Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 032/126] cpufreq: dt: Try freeing static OPPs only if we have added them Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 033/126] x86/intel_rdt: Show missing resctrl mount options Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 034/126] mtd: rawnand: atmel: Fix potential NULL pointer dereference Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 035/126] regulator: fixed: Default enable high on DT regulators Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 036/126] signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 037/126] ice: fix changing of ring descriptor size (ethtool -G) Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 038/126] ice: update fw version check logic Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 039/126] net: hns3: Fix for packet buffer setting bug Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 040/126] Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 041/126] x86: boot: Fix EFI stub alignment Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 042/126] net: hns3: Add nic state check before calling netif_tx_wake_queue Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 043/126] net: hns3: Fix ets validate issue Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 044/126] pinctrl: sunxi: fix 'pctrl->functions' allocation in sunxi_pinctrl_build_state Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 045/126] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 046/126] brcmfmac: fix for proper support of 160MHz bandwidth Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 047/126] net: hns3: Check hdev state when getting link status Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 048/126] net: hns3: Set STATE_DOWN bit of hdev state when stopping net Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 049/126] net: phy: phylink: ensure the carrier is off when starting phylink Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 050/126] block, bfq: correctly charge and reset entity service in all cases Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 051/126] arm64: entry: Allow handling of undefined instructions from EL1 Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 052/126] kprobes: Return error if we fail to reuse kprobe instead of BUG_ON() Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 053/126] spi: gpio: No MISO does not imply no RX Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 054/126] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 055/126] pinctrl: qcom: spmi-mpp: Fix drive strength setting Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 056/126] bpf/verifier: fix verifier instability Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 057/126] failover: Add missing check to validate 'slave_dev' in net_failover_slave_unregister Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 058/126] perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 059/126] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 060/126] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() " Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 061/126] net: hns3: Preserve vlan 0 in hardware table Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 062/126] net: hns3: Fix ping exited problem when doing lp selftest Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 063/126] net: hns3: Fix for vf vlan delete failed problem Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 064/126] net: dsa: mv88e6xxx: Fix writing to a PHY page Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 065/126] rsi: fix memory alignment issue in ARM32 platforms Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 066/126] iwlwifi: mvm: fix BAR seq ctrl reporting Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 067/126] gpio: brcmstb: allow 0 width GPIO banks Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 068/126] ixgbe: disallow IPsec Tx offload when in SR-IOV mode Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 069/126] ixgbevf: VF2VF TCP RSS Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 070/126] ath10k: schedule hardware restart if WMI command times out Sasha Levin
2018-10-31 23:06 ` [PATCH AUTOSEL 4.18 071/126] libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9 Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 072/126] thermal: rcar_thermal: Prevent doing work after unbind Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 073/126] thermal: da9062/61: Prevent hardware access during system suspend Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 074/126] cgroup, netclassid: add a preemption point to write_classid Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 075/126] net: stmmac: dwmac-sun8i: fix OF child-node lookup Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 076/126] f2fs: fix to account IO correctly for cgroup writeback Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 077/126] MD: Memory leak when flush bio size is zero Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 078/126] md: fix memleak for mempool Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 079/126] scsi: esp_scsi: Track residual for PIO transfers Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 080/126] scsi: ufs: Schedule clk gating work on correct queue Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 081/126] UAPI: ndctl: Fix g++-unsupported initialisation in headers Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 082/126] KVM: nVMX: Clear reserved bits of #DB exit qualification Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 083/126] scsi: megaraid_sas: fix a missing-check bug Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 084/126] RDMA/core: Do not expose unsupported counters Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 085/126] IB/ipoib: Clear IPCB before icmp_send Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 086/126] RDMA/bnxt_re: Avoid accessing nq->bar_reg_iomem in failure case Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 087/126] RDMA/bnxt_re: Fix recursive lock warning in debug kernel Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 088/126] usb: host: ohci-at91: fix request of irq for optional gpio Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 089/126] PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 090/126] PCI: cadence: Use AXI region 0 to signal interrupts from EP Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 091/126] usb: typec: tcpm: Report back negotiated PPS voltage and current Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 092/126] tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 093/126] f2fs: clear PageError on the read path Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 094/126] Drivers: hv: vmbus: Use cpumask_var_t for on-stack cpu mask Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 095/126] Drivers: hv: kvp: Fix two "this statement may fall through" warnings Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 096/126] VMCI: Resource wildcard match fixed Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 097/126] PCI / ACPI: Enable wake automatically for power managed bridges Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 098/126] xprtrdma: Reset credit grant properly after a disconnect Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 099/126] irqchip/pdc: Setup all edge interrupts as rising edge at GIC Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 100/126] usb: dwc2: fix a race with external vbus supply Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 101/126] usb: gadget: udc: atmel: handle at91sam9rl PMC Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 102/126] ext4: fix argument checking in EXT4_IOC_MOVE_EXT Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 103/126] MD: fix invalid stored role for a disk Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 104/126] nvmem: check the return value of nvmem_add_cells() Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 105/126] xhci: Avoid USB autosuspend when resuming USB2 ports Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 106/126] f2fs: fix to recover inode's crtime during POR Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 107/126] f2fs: fix to recover inode's i_flags " Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 108/126] PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 109/126] coresight: etb10: Fix handling of perf mode Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 110/126] PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 111/126] crypto: caam - fix implicit casts in endianness helpers Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 112/126] usb: chipidea: Prevent unbalanced IRQ disable Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 113/126] Smack: ptrace capability use fixes Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 114/126] driver/dma/ioat: Call del_timer_sync() without holding prep_lock Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 115/126] firmware: coreboot: Unmap ioregion after device population Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 116/126] IB/mlx5: Allow transition of DCI QP to reset Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 117/126] uio: ensure class is registered before devices Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 118/126] scsi: lpfc: Correct soft lockup when running mds diagnostics Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 119/126] scsi: lpfc: Correct race with abort on completion path Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 120/126] f2fs: avoid sleeping under spin_lock Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 121/126] f2fs: report error if quota off error during umount Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 122/126] signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 123/126] mfd: menelaus: Fix possible race condition and leak Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 124/126] dmaengine: dma-jz4780: Return error if not probed from DT Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 125/126] IB/rxe: fix for duplicate request processing and ack psns Sasha Levin
2018-10-31 23:07 ` [PATCH AUTOSEL 4.18 126/126] ALSA: hda: Check the non-cached stream buffers more explicitly Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031230754.29029-25-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luciano.coelho@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox