From: Dmitry Safonov <dima@arista.com>
To: linux-kernel@vger.kernel.org
Cc: "Dmitry Safonov" <0x7f454c46@gmail.com>,
"Dmitry Safonov" <dima@arista.com>,
"Daniel Axtens" <dja@axtens.net>,
"Dmitry Vyukov" <dvyukov@google.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michael Neuling" <mikey@neuling.org>,
"Mikulas Patocka" <mpatocka@redhat.com>,
"Nathan March" <nathan@gt.net>, "Pasi Kärkkäinen" <pasik@iki.fi>,
"Peter Hurley" <peter@hurleysoftware.com>,
"Peter Zijlstra" <peterz@infradead.org>,
"Rong, Chen" <rong.a.chen@intel.com>,
"Sergey Senozhatsky" <sergey.senozhatsky.work@gmail.com>,
"Tan Xiaojun" <tanxiaojun@huawei.com>,
"Tetsuo Handa" <penguin-kernel@I-love.SAKURA.ne.jp>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jslaby@suse.com>
Subject: [PATCHv6 3/7] tty: Don't block on IO when ldisc change is pending
Date: Thu, 1 Nov 2018 00:24:48 +0000 [thread overview]
Message-ID: <20181101002452.5483-4-dima@arista.com> (raw)
In-Reply-To: <20181101002452.5483-1-dima@arista.com>
There might be situations where tty_ldisc_lock() has blocked, but there
is already IO on tty and it prevents line discipline changes.
It might theoretically turn into dead-lock.
Basically, provide more priority to pending tty_ldisc_lock() than to
servicing reads/writes over tty.
User-visible issue was reported by Mikulas where on pa-risc with
Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper
locking in tty_reopen().
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
drivers/tty/n_hdlc.c | 4 ++--
drivers/tty/n_r3964.c | 2 +-
drivers/tty/n_tty.c | 8 ++++----
drivers/tty/tty_ldisc.c | 7 +++++++
include/linux/tty.h | 7 +++++++
5 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index dabb391909aa..99460af61b77 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -612,7 +612,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
}
/* no data */
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
ret = -EAGAIN;
break;
}
@@ -679,7 +679,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
if (tbuf)
break;
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
error = -EAGAIN;
break;
}
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 749a608c40b0..f75696f0ee2d 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1085,7 +1085,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
pMsg = remove_msg(pInfo, pClient);
if (pMsg == NULL) {
/* no messages available. */
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
ret = -EAGAIN;
goto unlock;
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3ad460219fd6..5dc9686697cf 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1702,7 +1702,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
down_read(&tty->termios_rwsem);
- while (1) {
+ do {
/*
* When PARMRK is set, each input char may take up to 3 chars
* in the read buf; reduce the buffer space avail by 3x
@@ -1744,7 +1744,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
fp += n;
count -= n;
rcvd += n;
- }
+ } while (!test_bit(TTY_LDISC_CHANGING, &tty->flags));
tty->receive_room = room;
@@ -2211,7 +2211,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
break;
if (!timeout)
break;
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
retval = -EAGAIN;
break;
}
@@ -2365,7 +2365,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
}
if (!nr)
break;
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
retval = -EAGAIN;
break;
}
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index fc4c97cae01e..9434d20cf3ca 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -327,6 +327,11 @@ int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
{
int ret;
+ /* Kindly asking blocked readers to release the read side */
+ set_bit(TTY_LDISC_CHANGING, &tty->flags);
+ wake_up_interruptible_all(&tty->read_wait);
+ wake_up_interruptible_all(&tty->write_wait);
+
ret = __tty_ldisc_lock(tty, timeout);
if (!ret)
return -EBUSY;
@@ -337,6 +342,8 @@ int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
void tty_ldisc_unlock(struct tty_struct *tty)
{
clear_bit(TTY_LDISC_HALTED, &tty->flags);
+ /* Can be cleared here - ldisc_unlock will wake up writers firstly */
+ clear_bit(TTY_LDISC_CHANGING, &tty->flags);
__tty_ldisc_unlock(tty);
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 414db2bce715..80ae5528ef8e 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -366,6 +366,7 @@ struct tty_file_private {
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
#define TTY_HUPPED 18 /* Post driver->hangup() */
#define TTY_HUPPING 19 /* Hangup in progress */
+#define TTY_LDISC_CHANGING 20 /* Change pending - non-block IO */
#define TTY_LDISC_HALTED 22 /* Line discipline is halted */
/* Values for tty->flow_change */
@@ -383,6 +384,12 @@ static inline void tty_set_flow_change(struct tty_struct *tty, int val)
smp_mb();
}
+static inline bool tty_io_nonblock(struct tty_struct *tty, struct file *file)
+{
+ return file->f_flags & O_NONBLOCK ||
+ test_bit(TTY_LDISC_CHANGING, &tty->flags);
+}
+
static inline bool tty_io_error(struct tty_struct *tty)
{
return test_bit(TTY_IO_ERROR, &tty->flags);
--
2.19.1
next prev parent reply other threads:[~2018-11-01 0:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-01 0:24 [PATCHv6 0/7] tty: Hold write ldisc sem in tty_reopen() Dmitry Safonov
2018-11-01 0:24 ` [PATCHv6 1/7] tty/ldsem: Wake up readers after timed out down_write() Dmitry Safonov
2018-11-01 0:24 ` [PATCHv6 2/7] tty: Hold tty_ldisc_lock() during tty_reopen() Dmitry Safonov
2018-11-09 20:44 ` Tycho Andersen
2018-11-01 0:24 ` Dmitry Safonov [this message]
2018-11-01 0:24 ` [PATCHv6 4/7] tty: Simplify tty->count math in tty_reopen() Dmitry Safonov
2018-11-01 0:24 ` [PATCHv6 5/7] tty/ldsem: Convert to regular lockdep annotations Dmitry Safonov
2018-11-01 0:24 ` [PATCHv6 6/7] tty/ldsem: Add lockdep asserts for ldisc_sem Dmitry Safonov
2018-11-01 0:24 ` [PATCHv6 7/7] tty/ldsem: Decrement wait_readers on timeouted down_read() Dmitry Safonov
2018-11-19 12:52 ` [PATCHv6 0/7] tty: Hold write ldisc sem in tty_reopen() Pasi Kärkkäinen
2018-12-07 14:24 ` Guilherme G. Piccoli
2018-12-07 15:23 ` Tycho Andersen
[not found] ` <CAHD1Q_yPbhTYcKwk2PUkoabD+dTqegkVEab7nAvcrgAN10otSQ@mail.gmail.com>
2018-12-07 15:37 ` Dmitry Safonov
2018-12-07 18:09 ` Guilherme G. Piccoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181101002452.5483-4-dima@arista.com \
--to=dima@arista.com \
--cc=0x7f454c46@gmail.com \
--cc=dja@axtens.net \
--cc=dvyukov@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mikey@neuling.org \
--cc=mpatocka@redhat.com \
--cc=nathan@gt.net \
--cc=pasik@iki.fi \
--cc=penguin-kernel@I-love.SAKURA.ne.jp \
--cc=peter@hurleysoftware.com \
--cc=peterz@infradead.org \
--cc=rong.a.chen@intel.com \
--cc=sergey.senozhatsky.work@gmail.com \
--cc=tanxiaojun@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox