[PATCH RESEND v3 1/2] arm64: dts: msm: add PDC device bindings for sdm845

Lina Iyer
2018-11-07T21:51:21Z

Add PDC interrupt controller device bindings for SDM845.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
Changes in v3:
- Fix PDC map, use GIC SPI port number for hwirq
Changes in v2:
- Order by address
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b72bdb0a31a5..09f26ae9f803 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1256,6 +1256,15 @@
#power-domain-cells = <1>;
};

+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sdm845-pdc";
+ reg = <0xb220000 0x30000>;
+ qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0xc263000 0x1ff>, /* TM */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project