Re: [PATCH 2/2] perf vendor events: Add JSON metrics for Cascadelake server

[Jiri Olsa <jolsa@redhat.com>]

On Wed, Nov 14, 2018 at 01:24:16PM -0800, kan.liang@linux.intel.com wrote:
> From: Kan Liang <kan.liang@linux.intel.com>
> 
> Add JSON metrics (based on event list v1) for Cascadelake server

hum mail server probably crippled the email so it won't apply:

patching file pmu-events/arch/x86/cascadelakex/cache.json
patching file pmu-events/arch/x86/cascadelakex/clx-metrics.json
patching file pmu-events/arch/x86/cascadelakex/floating-point.json
patching file pmu-events/arch/x86/cascadelakex/frontend.json
patching file pmu-events/arch/x86/cascadelakex/memory.json
patching file pmu-events/arch/x86/cascadelakex/other.json
patching file pmu-events/arch/x86/cascadelakex/pipeline.json
patch: **** malformed patch at line 29879:  ow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",

I've similar error before and it was because of the 998 chars size
limit for line.. I guess you could either post it as attachment or
change the transfer encoding

jirka