Re: [PATCH v4 0/3] Add driver for Synopsys DesignWare I3C master IP

Boris Brezillon
2018-11-15T19:29:22Z

On Tue, 13 Nov 2018 14:09:50 +0000
Vitor Soares <vitor.soares@synopsys.com> wrote:

> This patch series is a proposal for the I3C master driver for Synopsys IP.
> This patch is to be applied on top of I3C subsystem RFC V10 submitted by
> Boris Brezillon.
>
> Supported features:
> Regular CCC commands.
> I3C private transfers.
> I2C transfers.
>
> Missing functionalities:
> Support DMA interface.
> Support for I3C_BUS_MODE_MIXED_SLOW.
> Hot-join.
> IBI.

Patchset queued to i3c/next.

Thanks,

Boris

>
> Main change between v3 and v4:
> - Minor fixes. They are described in each patch
>
> Main change between v2 and v3:
> - Minor fixes. They are described in each patch
>
> Main change between v1 and v2:
> - Add controller version on dt-binding
> - The driver now calls writesl/readsl() instead readl/writel
> - Rename some variables in the driver
>
> Vitor Soares (3):
> i3c: master: Add driver for Synopsys DesignWare IP
> dt-binding: i3c: Document Synopsys DesignWare I3C
> MAINTAINERS: Add myself as the dw-i3c-master module maintainer
>
> .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 41 +
> MAINTAINERS | 6 +
> drivers/i3c/master/Kconfig | 14 +
> drivers/i3c/master/Makefile | 1 +
> drivers/i3c/master/dw-i3c-master.c | 1216 ++++++++++++++++++++
> 5 files changed, 1278 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> create mode 100644 drivers/i3c/master/dw-i3c-master.c
>