[PATCH v3 0/3] Use interconnect API in MDSS on SDM845

[Sravanthi Kollukuduru <skolluku@codeaurora.org>]

The interconnect API provides an interface for consumer drivers to express
their bandwidth needs in the SoC. This data is aggregated and the on-chip
interconnect hardware is configured to the appropriate power/performance
profile.

MDSS is one of the interconnect consumers which uses the interconnect APIs
to get the path between endpoints and set its bandwidth requirements
for the given interconnected path.

Subsequently, there is a clean up patch to remove all the references
of the DPU custom bus scaling.

There is corresponding DT patch with the source and destination ports
defined for display driver which will be sent separately.

Changes in v2: 
	- Remove error log and unnecessary check (Jordan Crouse)
	- Fixed build error due to partial clean up

Changes in v3:
	- Remove common property definitions (Rob Herring)
	- Code clean up involving variable name change, removal
	  of extra paranthesis and variables (Matthias Kaehlcke)
	- Condense multiple lines into a single line (Sean Paul)

Sravanthi Kollukuduru (3):
  drm/msm/dpu: clean up references of DPU custom bus scaling
  drm/msm/dpu: Integrate interconnect API in MDSS
  dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on
    SDM845

 .../devicetree/bindings/display/msm/dpu.txt        |   9 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c      | 174 ++++++++-------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h      |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c           |  13 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c           |  49 +++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c   |  47 ++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h   |  68 --------
 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h          |  22 +--
 8 files changed, 142 insertions(+), 244 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project