From: Ondrej Zary <linux@rainbow-software.org>
To: Michael Chan <michael.chan@broadcom.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: bnxt_en: NIC Link is Up, 100 Mbps full duplex - but no data
Date: Wed, 28 Nov 2018 16:08:14 +0100 [thread overview]
Message-ID: <201811281608.14617.linux@rainbow-software.org> (raw)
Hello,
I have a new Dell R740 server with BCM57416:
Ethernet controller [0200]: Broadcom Limited BCM57416 NetXtreme-E 10GBase-T RDMA Ethernet Controller [14e4:16d8] (rev 01)
Subsystem: Broadcom Limited BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller [14e4:4160]
When I connect a cable from 100Mbps switch, everything looks good - the link
LED lights up orange, data LED flashes green as when data is sent/received,
this appears in log:
[ 3791.655357] bnxt_en 0000:17:00.0 eno1np0: NIC Link is Up, 100 Mbps full duplex, Flow control: ON - receive & transmit
[ 3791.655361] bnxt_en 0000:17:00.0 eno1np0: EEE is not active
[ 3791.655364] bnxt_en 0000:17:00.0 eno1np0: FEC autoneg off encodings: None
But no data comes in or out. tcpdump shows only outgoing packets and they're
not transmitted in real (not seen by other machines).
It works fine after connecting through a gigabit switch.
Currently running 4.18.0-2-amd64 kernel (Debian testing).
Any ideas?
--
Ondrej Zary
reply other threads:[~2018-11-28 15:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201811281608.14617.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox