[PATCH AUTOSEL 4.14 30/69] ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE

Sasha Levin
2018-12-05T09:45:05Z

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without overrun.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/omap/omap-dmic.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
index 09db2aec12a3..776e809a8aab 100644
--- a/sound/soc/omap/omap-dmic.c
+++ b/sound/soc/omap/omap-dmic.c
@@ -48,6 +48,8 @@ struct omap_dmic {
struct device *dev;
void __iomem *io_base;
struct clk *fclk;
+ struct pm_qos_request pm_qos_req;
+ int latency;
int fclk_freq;
int out_freq;
int clk_div;
@@ -124,6 +126,8 @@ static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,

mutex_lock(&dmic->mutex);

+ pm_qos_remove_request(&dmic->pm_qos_req);
+
if (!dai->active)
dmic->active = 0;

@@ -226,6 +230,8 @@ static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream,
/* packet size is threshold * channels */
dma_data = snd_soc_dai_get_dma_data(dai, substream);
dma_data->maxburst = dmic->threshold * channels;
+ dmic->latency = (OMAP_DMIC_THRES_MAX - dmic->threshold) * USEC_PER_SEC /
+ params_rate(params);

return 0;
}
@@ -236,6 +242,9 @@ static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream,
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
u32 ctrl;

+ if (pm_qos_request_active(&dmic->pm_qos_req))
+ pm_qos_update_request(&dmic->pm_qos_req, dmic->latency);
+
/* Configure uplink threshold */
omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold);

--
2.17.1