[PATCH AUTOSEL 4.14 01/69] ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup

[PATCH AUTOSEL 4.14 01/69] ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit eef3dc34a1e0b01d53328b88c25237bcc7323777 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from
the function omap44xx_prm_late_init() to the function
.init.text:omap44xx_prm_enable_io_wakeup()
The function omap44xx_prm_late_init() references
the function __init omap44xx_prm_enable_io_wakeup().
This is often because omap44xx_prm_late_init lacks a __init
annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.

Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there
is no more mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/prm44xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 1c0c1663f078..5affa9f5300b 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -344,7 +344,7 @@ static void omap44xx_prm_reconfigure_io_chain(void)
  * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
  * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
  */
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
 {
 	s32 inst = omap4_prmst_get_prm_dev_inst();
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 02/69] ASoC: rsnd: fixup clock start checker

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 3ee9a76a8c5a10e1bfb04b81db767c6d562ddaf3 ]

commit 4d230d12710646 ("ASoC: rsnd: fixup not to call clk_get/set under
non-atomic") fixuped clock start timing. But it exchanged clock start
checker from ssi->usrcnt to ssi->rate.

Current rsnd_ssi_master_clk_start() is called from .prepare,
but some player (for example GStreamer) might calls it many times.
In such case, the checker might returns error even though it was not
error. It should check ssi->usrcnt instead of ssi->rate.
This patch fixup it. Without this patch, GStreamer can't switch
48kHz / 44.1kHz.

Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 34223c8c28a8..0db2791f7035 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -280,7 +280,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
 	if (rsnd_ssi_is_multi_slave(mod, io))
 		return 0;
 
-	if (ssi->rate) {
+	if (ssi->usrcnt > 1) {
 		if (ssi->rate != rate) {
 			dev_err(dev, "SSI parent/child should use same rate\n");
 			return -EINVAL;
-- 
2.17.1

[PATCH AUTOSEL 4.14 03/69] iio:st_magn: Fix enable device after trigger

[Sasha Levin]

From: Martin Kelly <martin@martingkelly.com>

[ Upstream commit fe5192ac81ad0d4dfe1395d11f393f0513c15f7f ]

Currently, we enable the device before we enable the device trigger. At
high frequencies, this can cause interrupts that don't yet have a poll
function associated with them and are thus treated as spurious. At high
frequencies with level interrupts, this can even cause an interrupt storm
of repeated spurious interrupts (~100,000 on my Beagleboard with the
LSM9DS1 magnetometer). If these repeat too much, the interrupt will get
disabled and the device will stop functioning.

To prevent these problems, enable the device prior to enabling the device
trigger, and disable the divec prior to disabling the trigger. This means
there's no window of time during which the device creates interrupts but we
have no trigger to answer them.

Fixes: 90efe055629 ("iio: st_sensors: harden interrupt handling")
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Tested-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/magnetometer/st_magn_buffer.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c
index 0a9e8fadfa9d..37ab30566464 100644
--- a/drivers/iio/magnetometer/st_magn_buffer.c
+++ b/drivers/iio/magnetometer/st_magn_buffer.c
@@ -30,11 +30,6 @@ int st_magn_trig_set_state(struct iio_trigger *trig, bool state)
 	return st_sensors_set_dataready_irq(indio_dev, state);
 }
 
-static int st_magn_buffer_preenable(struct iio_dev *indio_dev)
-{
-	return st_sensors_set_enable(indio_dev, true);
-}
-
 static int st_magn_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int err;
@@ -50,7 +45,7 @@ static int st_magn_buffer_postenable(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_magn_buffer_postenable_error;
 
-	return err;
+	return st_sensors_set_enable(indio_dev, true);
 
 st_magn_buffer_postenable_error:
 	kfree(mdata->buffer_data);
@@ -63,11 +58,11 @@ static int st_magn_buffer_predisable(struct iio_dev *indio_dev)
 	int err;
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
 
-	err = iio_triggered_buffer_predisable(indio_dev);
+	err = st_sensors_set_enable(indio_dev, false);
 	if (err < 0)
 		goto st_magn_buffer_predisable_error;
 
-	err = st_sensors_set_enable(indio_dev, false);
+	err = iio_triggered_buffer_predisable(indio_dev);
 
 st_magn_buffer_predisable_error:
 	kfree(mdata->buffer_data);
@@ -75,7 +70,6 @@ static int st_magn_buffer_predisable(struct iio_dev *indio_dev)
 }
 
 static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = {
-	.preenable = &st_magn_buffer_preenable,
 	.postenable = &st_magn_buffer_postenable,
 	.predisable = &st_magn_buffer_predisable,
 };
-- 
2.17.1

[PATCH AUTOSEL 4.14 04/69] staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c3e43d8b958bd6849817393483e805d8638a8ab7 ]

We return 0 unconditionally in 'rtw_wx_read32()'.
However, 'ret' is set to some error codes in several error handling paths.

Return 'ret' instead to propagate the error code.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
index d5e5f830f2a1..1b61da61690b 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
@@ -2383,7 +2383,7 @@ static int rtw_wx_read32(struct net_device *dev,
 exit:
 	kfree(ptmp);
 
-	return 0;
+	return ret;
 }
 
 static int rtw_wx_write32(struct net_device *dev,
-- 
2.17.1

[PATCH AUTOSEL 4.14 05/69] ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1

[Sasha Levin]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 3d8b804bc528d3720ec0c39c212af92dafaf6e84 ]

The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index c335b923753a..a7883676f675 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -123,7 +123,7 @@
 };
 
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
-- 
2.17.1

[PATCH AUTOSEL 4.14 06/69] ARM: OMAP1: ams-delta: Fix possible use of uninitialized field

[Sasha Levin]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

[ Upstream commit cec83ff1241ec98113a19385ea9e9cfa9aa4125b ]

While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference.  Fix it by checking for uninitialized pointer before using
it in modem_pm().

Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap1/board-ams-delta.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 6cbc69c92913..4174fa86bfb1 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -512,6 +512,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 	struct modem_private_data *priv = port->private_data;
 	int ret;
 
+	if (!priv)
+		return;
+
 	if (IS_ERR(priv->regulator))
 		return;
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 07/69] sysv: return 'err' instead of 0 in __sysv_write_inode

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit c4b7d1ba7d263b74bb72e9325262a67139605cde ]

Fixes gcc '-Wunused-but-set-variable' warning:

fs/sysv/inode.c: In function '__sysv_write_inode':
fs/sysv/inode.c:239:6: warning:
 variable 'err' set but not used [-Wunused-but-set-variable]

__sysv_write_inode should return 'err' instead of 0

Fixes: 05459ca81ac3 ("repair sysv_write_inode(), switch sysv to simple_fsync()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/sysv/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 3c47b7d5d4cf..9e0874d1524c 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -275,7 +275,7 @@ static int __sysv_write_inode(struct inode *inode, int wait)
                 }
         }
 	brelse(bh);
-	return 0;
+	return err;
 }
 
 int sysv_write_inode(struct inode *inode, struct writeback_control *wbc)
-- 
2.17.1

[PATCH AUTOSEL 4.14 08/69] selftests: add script to stress-test nft packet path vs. control plane

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 25d8bcedbf4329895dbaf9dd67baa6f18dad918c ]

Start flood ping for each cpu while loading/flushing rulesets to make
sure we do not access already-free'd rules from nf_tables evaluation loop.

Also add this to TARGETS so 'make run_tests' in selftest dir runs it
automatically.

This would have caught the bug fixed in previous change
("netfilter: nf_tables: do not skip inactive chains during generation update")
sooner.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/Makefile              |  1 +
 tools/testing/selftests/netfilter/Makefile    |  6 ++
 tools/testing/selftests/netfilter/config      |  2 +
 .../selftests/netfilter/nft_trans_stress.sh   | 78 +++++++++++++++++++
 4 files changed, 87 insertions(+)
 create mode 100644 tools/testing/selftests/netfilter/Makefile
 create mode 100644 tools/testing/selftests/netfilter/config
 create mode 100755 tools/testing/selftests/netfilter/nft_trans_stress.sh

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index ea300e7818a7..10b89f5b9af7 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -20,6 +20,7 @@ TARGETS += memory-hotplug
 TARGETS += mount
 TARGETS += mqueue
 TARGETS += net
+TARGETS += netfilter
 TARGETS += nsfs
 TARGETS += powerpc
 TARGETS += pstore
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
new file mode 100644
index 000000000000..47ed6cef93fb
--- /dev/null
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for netfilter selftests
+
+TEST_PROGS := nft_trans_stress.sh
+
+include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
new file mode 100644
index 000000000000..1017313e41a8
--- /dev/null
+++ b/tools/testing/selftests/netfilter/config
@@ -0,0 +1,2 @@
+CONFIG_NET_NS=y
+NF_TABLES_INET=y
diff --git a/tools/testing/selftests/netfilter/nft_trans_stress.sh b/tools/testing/selftests/netfilter/nft_trans_stress.sh
new file mode 100755
index 000000000000..f1affd12c4b1
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_trans_stress.sh
@@ -0,0 +1,78 @@
+#!/bin/bash
+#
+# This test is for stress-testing the nf_tables config plane path vs.
+# packet path processing: Make sure we never release rules that are
+# still visible to other cpus.
+#
+# set -e
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+testns=testns1
+tables="foo bar baz quux"
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+tmp=$(mktemp)
+
+for table in $tables; do
+	echo add table inet "$table" >> "$tmp"
+	echo flush table inet "$table" >> "$tmp"
+
+	echo "add chain inet $table INPUT { type filter hook input priority 0; }" >> "$tmp"
+	echo "add chain inet $table OUTPUT { type filter hook output priority 0; }" >> "$tmp"
+	for c in $(seq 1 400); do
+		chain=$(printf "chain%03u" "$c")
+		echo "add chain inet $table $chain" >> "$tmp"
+	done
+
+	for c in $(seq 1 400); do
+		chain=$(printf "chain%03u" "$c")
+		for BASE in INPUT OUTPUT; do
+			echo "add rule inet $table $BASE counter jump $chain" >> "$tmp"
+		done
+		echo "add rule inet $table $chain counter return" >> "$tmp"
+	done
+done
+
+ip netns add "$testns"
+ip -netns "$testns" link set lo up
+
+lscpu | grep ^CPU\(s\): | ( read cpu cpunum ;
+cpunum=$((cpunum-1))
+for i in $(seq 0 $cpunum);do
+	mask=$(printf 0x%x $((1<<$i)))
+        ip netns exec "$testns" taskset $mask ping -4 127.0.0.1 -fq > /dev/null &
+        ip netns exec "$testns" taskset $mask ping -6 ::1 -fq > /dev/null &
+done)
+
+sleep 1
+
+for i in $(seq 1 10) ; do ip netns exec "$testns" nft -f "$tmp" & done
+
+for table in $tables;do
+	randsleep=$((RANDOM%10))
+	sleep $randsleep
+	ip netns exec "$testns" nft delete table inet $table 2>/dev/null
+done
+
+randsleep=$((RANDOM%10))
+sleep $randsleep
+
+pkill -9 ping
+
+wait
+
+rm -f "$tmp"
+ip netns del "$testns"
-- 
2.17.1

[PATCH AUTOSEL 4.14 09/69] netfilter: nf_tables: fix use-after-free when deleting compat expressions

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 29e3880109e357fdc607b4393f8308cef6af9413 ]

nft_compat ops do not have static storage duration, unlike all other
expressions.

When nf_tables_expr_destroy() returns, expr->ops might have been
free'd already, so we need to store next address before calling
expression destructor.

For same reason, we can't deref match pointer after nft_xt_put().

This can be easily reproduced by adding msleep() before
nft_match_destroy() returns.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 5 +++--
 net/netfilter/nft_compat.c    | 3 ++-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 3ae365f92bff..ea1e57daf50e 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2252,7 +2252,7 @@ static int nf_tables_getrule(struct net *net, struct sock *nlsk,
 static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
 				   struct nft_rule *rule)
 {
-	struct nft_expr *expr;
+	struct nft_expr *expr, *next;
 
 	/*
 	 * Careful: some expressions might not be initialized in case this
@@ -2260,8 +2260,9 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
 	 */
 	expr = nft_expr_first(rule);
 	while (expr != nft_expr_last(rule) && expr->ops) {
+		next = nft_expr_next(expr);
 		nf_tables_expr_destroy(ctx, expr);
-		expr = nft_expr_next(expr);
+		expr = next;
 	}
 	kfree(rule);
 }
diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index 6da1cec1494a..7533c2fd6b76 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -497,6 +497,7 @@ __nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		    void *info)
 {
 	struct xt_match *match = expr->ops->data;
+	struct module *me = match->me;
 	struct xt_mtdtor_param par;
 
 	par.net = ctx->net;
@@ -507,7 +508,7 @@ __nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		par.match->destroy(&par);
 
 	if (nft_xt_put(container_of(expr->ops, struct nft_xt, ops)))
-		module_put(match->me);
+		module_put(me);
 }
 
 static void
-- 
2.17.1

[PATCH AUTOSEL 4.14 10/69] hwmon (ina2xx) Fix NULL id pointer in probe()

[Sasha Levin]

From: Nicolin Chen <nicoleotsuka@gmail.com>

[ Upstream commit 70df9ebbd82c794ddfbb49d45b337f18d5588dc2 ]

When using DT configurations, the id pointer might turn out to
be NULL. Then the driver encounters NULL pointer access:

  Unable to handle kernel read from unreadable memory at vaddr 00000018
  [...]
  PC is at ina2xx_probe+0x114/0x200
  LR is at ina2xx_probe+0x10c/0x200
  [...]
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

The reason is that i2c core returns the id pointer by matching
id_table with client->name, while the client->name is actually
using the name from the first string in the DT compatible list,
not the best one. So i2c core would fail to match the id_table
if the best matched compatible string isn't the first one, and
then would return a NULL id pointer.

This probably should be fixed in i2c core. But it doesn't hurt
to make the driver robust. So this patch fixes it by using the
"chip" that's added to unify both DT and non-DT configurations.

Additionally, since id pointer could be null, so as id->name:
  ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm)
  ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm)

So this patch also fixes NULL name pointer, using client->name
to play safe and to align with hwmon->name.

Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/ina2xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 71d3445ba869..c2252cf452f5 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -491,7 +491,7 @@ static int ina2xx_probe(struct i2c_client *client,
 	}
 
 	data->groups[group++] = &ina2xx_group;
-	if (id->driver_data == ina226)
+	if (chip == ina226)
 		data->groups[group++] = &ina226_group;
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
@@ -500,7 +500,7 @@ static int ina2xx_probe(struct i2c_client *client,
 		return PTR_ERR(hwmon_dev);
 
 	dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
-		 id->name, data->rshunt);
+		 client->name, data->rshunt);
 
 	return 0;
 }
-- 
2.17.1

[PATCH AUTOSEL 4.14 11/69] ASoC: wm_adsp: Fix dma-unsafe read of scratch registers

[Sasha Levin]

From: Richard Fitzgerald <rf@opensource.cirrus.com>

[ Upstream commit 20e00db2f59bdddf8a8e241473ef8be94631d3ae ]

Stack memory isn't DMA-safe so it isn't safe to use either
regmap_raw_read or regmap_bulk_read to read into stack memory.

The two functions to read the scratch registers were using
stack memory and regmap_raw_read. It's not worth allocating
memory just for this trivial read, and it isn't time-critical.
A simple regmap_read for each register is sufficient.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm_adsp.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 989d093abda7..67330b6ab204 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -787,38 +787,41 @@ static unsigned int wm_adsp_region_to_reg(struct wm_adsp_region const *mem,
 
 static void wm_adsp2_show_fw_status(struct wm_adsp *dsp)
 {
-	u16 scratch[4];
+	unsigned int scratch[4];
+	unsigned int addr = dsp->base + ADSP2_SCRATCH0;
+	unsigned int i;
 	int ret;
 
-	ret = regmap_raw_read(dsp->regmap, dsp->base + ADSP2_SCRATCH0,
-				scratch, sizeof(scratch));
-	if (ret) {
-		adsp_err(dsp, "Failed to read SCRATCH regs: %d\n", ret);
-		return;
+	for (i = 0; i < ARRAY_SIZE(scratch); ++i) {
+		ret = regmap_read(dsp->regmap, addr + i, &scratch[i]);
+		if (ret) {
+			adsp_err(dsp, "Failed to read SCRATCH%u: %d\n", i, ret);
+			return;
+		}
 	}
 
 	adsp_dbg(dsp, "FW SCRATCH 0:0x%x 1:0x%x 2:0x%x 3:0x%x\n",
-		 be16_to_cpu(scratch[0]),
-		 be16_to_cpu(scratch[1]),
-		 be16_to_cpu(scratch[2]),
-		 be16_to_cpu(scratch[3]));
+		 scratch[0], scratch[1], scratch[2], scratch[3]);
 }
 
 static void wm_adsp2v2_show_fw_status(struct wm_adsp *dsp)
 {
-	u32 scratch[2];
+	unsigned int scratch[2];
 	int ret;
 
-	ret = regmap_raw_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH0_1,
-			      scratch, sizeof(scratch));
-
+	ret = regmap_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH0_1,
+			  &scratch[0]);
 	if (ret) {
-		adsp_err(dsp, "Failed to read SCRATCH regs: %d\n", ret);
+		adsp_err(dsp, "Failed to read SCRATCH0_1: %d\n", ret);
 		return;
 	}
 
-	scratch[0] = be32_to_cpu(scratch[0]);
-	scratch[1] = be32_to_cpu(scratch[1]);
+	ret = regmap_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH2_3,
+			  &scratch[1]);
+	if (ret) {
+		adsp_err(dsp, "Failed to read SCRATCH2_3: %d\n", ret);
+		return;
+	}
 
 	adsp_dbg(dsp, "FW SCRATCH 0:0x%x 1:0x%x 2:0x%x 3:0x%x\n",
 		 scratch[0] & 0xFFFF,
-- 
2.17.1

[PATCH AUTOSEL 4.14 12/69] s390/cpum_cf: Reject request for sampling in event initialization

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 613a41b0d16e617f46776a93b975a1eeea96417c ]

On s390 command perf top fails
[root@s35lp76 perf] # ./perf top -F100000  --stdio
   Error:
   cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
   	Try 'perf stat'
[root@s35lp76 perf] #

Using event -e rb0000 works as designed.  Event rb0000 is the event
number of the sampling facility for basic sampling.

During system start up the following PMUs are installed in the kernel's
PMU list (from head to tail):
   cpum_cf --> s390 PMU counter facility device driver
   cpum_sf --> s390 PMU sampling facility device driver
   uprobe
   kprobe
   tracepoint
   task_clock
   cpu_clock

Perf top executes following functions and calls perf_event_open(2) system
call with different parameters many times:

cmd_top
--> __cmd_top
    --> perf_evlist__add_default
        --> __perf_evlist__add_default
            --> perf_evlist__new_cycles (creates event type:0 (HW)
			    		config 0 (CPU_CYCLES)
	        --> perf_event_attr__set_max_precise_ip
		    Uses perf_event_open(2) to detect correct
		    precise_ip level. Fails 3 times on s390 which is ok.

Then functions cmd_top
--> __cmd_top
    --> perf_top__start_counters
        -->perf_evlist__config
	   --> perf_can_comm_exec
               --> perf_probe_api
	           This functions test support for the following events:
		   "cycles:u", "instructions:u", "cpu-clock:u" using
		   --> perf_do_probe_api
		       --> perf_event_open_cloexec
		           Test the close on exec flag support with
			   perf_event_open(2).
	               perf_do_probe_api returns true if the event is
		       supported.
		       The function returns true because event cpu-clock is
		       supported by the PMU cpu_clock.
	               This is achieved by many calls to perf_event_open(2).

Function perf_top__start_counters now calls perf_evsel__open() for every
event, which is the default event cpu_cycles (config:0) and type HARDWARE
(type:0) which a predfined frequence of 4000.

Given the above order of the PMU list, the PMU cpum_cf gets called first
and returns 0, which indicates support for this sampling. The event is
fully allocated in the function perf_event_open (file kernel/event/core.c
near line 10521 and the following check fails:

        event = perf_event_alloc(&attr, cpu, task, group_leader, NULL,
		                 NULL, NULL, cgroup_fd);
	if (IS_ERR(event)) {
		err = PTR_ERR(event);
		goto err_cred;
	}

        if (is_sampling_event(event)) {
		if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) {
			err = -EOPNOTSUPP;
			goto err_alloc;
		}
	}

The check for the interrupt capabilities fails and the system call
perf_event_open() returns -EOPNOTSUPP (-95).

Add a check to return -ENODEV when sampling is requested in PMU cpum_cf.
This allows common kernel code in the perf_event_open() system call to
test the next PMU in above list.

Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/perf_cpum_cf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 61e91fee8467..edf6a61f0a64 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -349,6 +349,8 @@ static int __hw_perf_event_init(struct perf_event *event)
 		break;
 
 	case PERF_TYPE_HARDWARE:
+		if (is_sampling_event(event))	/* No sampling support */
+			return -ENOENT;
 		ev = attr->config;
 		/* Count user space (problem-state) only */
 		if (!attr->exclude_user && attr->exclude_kernel) {
-- 
2.17.1

[PATCH AUTOSEL 4.14 13/69] hwmon: (ina2xx) Fix current value calculation

[Sasha Levin]

From: Nicolin Chen <nicoleotsuka@gmail.com>

[ Upstream commit 38cd989ee38c16388cde89db5b734f9d55b905f9 ]

The current register (04h) has a sign bit at MSB. The comments
for this calculation also mention that it's a signed register.

However, the regval is unsigned type so result of calculation
turns out to be an incorrect value when current is negative.

This patch simply fixes this by adding a casting to s16.

Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/ina2xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index c2252cf452f5..07ee19573b3f 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -274,7 +274,7 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
 		break;
 	case INA2XX_CURRENT:
 		/* signed register, result in mA */
-		val = regval * data->current_lsb_uA;
+		val = (s16)regval * data->current_lsb_uA;
 		val = DIV_ROUND_CLOSEST(val, 1000);
 		break;
 	case INA2XX_CALIBRATION:
-- 
2.17.1

[PATCH AUTOSEL 4.14 14/69] ASoC: omap-abe-twl6040: Fix missing audio card caused by deferred probing

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 76836fd354922ebe4798a64fda01f8dc6a8b0984 ]

The machine driver fails to probe in next-20181113 with:

[    2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered
[    2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517
...
[    3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040
[    3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040
[    3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22
[    3.715148] omap-abe-twl6040: probe of sound failed with error -22

Bisect pointed to a merge commit:
first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master'

and a diff between a working kernel does not reveal anything which would
explain the change in behavior.

Further investigation showed that on the second try of loading fails
because the dai_link->platform is no longer NULL and it might be pointing
to uninitialized memory.

The fix is to move the snd_soc_dai_link and snd_soc_card inside of the
abe_twl6040 struct, which is dynamically allocated every time the driver
probes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/omap/omap-abe-twl6040.c | 67 +++++++++++++------------------
 1 file changed, 29 insertions(+), 38 deletions(-)

diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c
index 614b18d2f631..6fd143799534 100644
--- a/sound/soc/omap/omap-abe-twl6040.c
+++ b/sound/soc/omap/omap-abe-twl6040.c
@@ -36,6 +36,8 @@
 #include "../codecs/twl6040.h"
 
 struct abe_twl6040 {
+	struct snd_soc_card card;
+	struct snd_soc_dai_link dai_links[2];
 	int	jack_detection;	/* board can detect jack events */
 	int	mclk_freq;	/* MCLK frequency speed for twl6040 */
 };
@@ -208,40 +210,10 @@ static int omap_abe_dmic_init(struct snd_soc_pcm_runtime *rtd)
 				ARRAY_SIZE(dmic_audio_map));
 }
 
-/* Digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link abe_twl6040_dai_links[] = {
-	{
-		.name = "TWL6040",
-		.stream_name = "TWL6040",
-		.codec_dai_name = "twl6040-legacy",
-		.codec_name = "twl6040-codec",
-		.init = omap_abe_twl6040_init,
-		.ops = &omap_abe_ops,
-	},
-	{
-		.name = "DMIC",
-		.stream_name = "DMIC Capture",
-		.codec_dai_name = "dmic-hifi",
-		.codec_name = "dmic-codec",
-		.init = omap_abe_dmic_init,
-		.ops = &omap_abe_dmic_ops,
-	},
-};
-
-/* Audio machine driver */
-static struct snd_soc_card omap_abe_card = {
-	.owner = THIS_MODULE,
-
-	.dapm_widgets = twl6040_dapm_widgets,
-	.num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets),
-	.dapm_routes = audio_map,
-	.num_dapm_routes = ARRAY_SIZE(audio_map),
-};
-
 static int omap_abe_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
-	struct snd_soc_card *card = &omap_abe_card;
+	struct snd_soc_card *card;
 	struct device_node *dai_node;
 	struct abe_twl6040 *priv;
 	int num_links = 0;
@@ -252,12 +224,18 @@ static int omap_abe_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	card->dev = &pdev->dev;
-
 	priv = devm_kzalloc(&pdev->dev, sizeof(struct abe_twl6040), GFP_KERNEL);
 	if (priv == NULL)
 		return -ENOMEM;
 
+	card = &priv->card;
+	card->dev = &pdev->dev;
+	card->owner = THIS_MODULE;
+	card->dapm_widgets = twl6040_dapm_widgets;
+	card->num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets);
+	card->dapm_routes = audio_map;
+	card->num_dapm_routes = ARRAY_SIZE(audio_map);
+
 	if (snd_soc_of_parse_card_name(card, "ti,model")) {
 		dev_err(&pdev->dev, "Card name is not provided\n");
 		return -ENODEV;
@@ -274,14 +252,27 @@ static int omap_abe_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "McPDM node is not provided\n");
 		return -EINVAL;
 	}
-	abe_twl6040_dai_links[0].cpu_of_node = dai_node;
-	abe_twl6040_dai_links[0].platform_of_node = dai_node;
+
+	priv->dai_links[0].name = "DMIC";
+	priv->dai_links[0].stream_name = "TWL6040";
+	priv->dai_links[0].cpu_of_node = dai_node;
+	priv->dai_links[0].platform_of_node = dai_node;
+	priv->dai_links[0].codec_dai_name = "twl6040-legacy";
+	priv->dai_links[0].codec_name = "twl6040-codec";
+	priv->dai_links[0].init = omap_abe_twl6040_init;
+	priv->dai_links[0].ops = &omap_abe_ops;
 
 	dai_node = of_parse_phandle(node, "ti,dmic", 0);
 	if (dai_node) {
 		num_links = 2;
-		abe_twl6040_dai_links[1].cpu_of_node = dai_node;
-		abe_twl6040_dai_links[1].platform_of_node = dai_node;
+		priv->dai_links[1].name = "TWL6040";
+		priv->dai_links[1].stream_name = "DMIC Capture";
+		priv->dai_links[1].cpu_of_node = dai_node;
+		priv->dai_links[1].platform_of_node = dai_node;
+		priv->dai_links[1].codec_dai_name = "dmic-hifi";
+		priv->dai_links[1].codec_name = "dmic-codec";
+		priv->dai_links[1].init = omap_abe_dmic_init;
+		priv->dai_links[1].ops = &omap_abe_dmic_ops;
 	} else {
 		num_links = 1;
 	}
@@ -300,7 +291,7 @@ static int omap_abe_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	card->dai_link = abe_twl6040_dai_links;
+	card->dai_link = priv->dai_links;
 	card->num_links = num_links;
 
 	snd_soc_card_set_drvdata(card, priv);
-- 
2.17.1

[PATCH AUTOSEL 4.14 15/69] ASoC: dapm: Recalculate audio map forcely when card instantiated

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 882eab6c28d23a970ae73b7eb831b169a672d456 ]

Audio map are possible in wrong state before card->instantiated has
been set to true.  Imaging the following examples:

time 1: at the beginning

  in:-1    in:-1    in:-1    in:-1
 out:-1   out:-1   out:-1   out:-1
 SIGGEN        A        B      Spk

time 2: after someone called snd_soc_dapm_new_widgets()
(e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c)

   in:1     in:0     in:0     in:0
  out:0    out:0    out:0    out:1
 SIGGEN        A        B      Spk

time 3: routes added

   in:1     in:0     in:0     in:0
  out:0    out:0    out:0    out:1
 SIGGEN -----> A -----> B ---> Spk

In the end, the path should be powered on but it did not.  At time 3,
"in" of SIGGEN and "out" of Spk did not propagate to their neighbors
because snd_soc_dapm_add_path() will not invalidate the paths if
the card has not instantiated (i.e. card->instantiated is false).
To correct the state of audio map, recalculate the whole map forcely.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index fee4b0ef5566..42c2a3065b77 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2307,6 +2307,7 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card)
 	}
 
 	card->instantiated = 1;
+	dapm_mark_endpoints_dirty(card);
 	snd_soc_dapm_sync(&card->dapm);
 	mutex_unlock(&card->mutex);
 	mutex_unlock(&client_mutex);
-- 
2.17.1

[PATCH AUTOSEL 4.14 16/69] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0145b50566e7de5637e80ecba96c7f0e6fff1aad ]

Before this commit sensor_hub_input_attr_get_raw_value() failed to take
the signedness of 16 and 8 bit values into account, returning e.g.
65436 instead of -100 for the z-axis reading of an accelerometer.

This commit adds a new is_signed parameter to the function and makes all
callers pass the appropriate value for this.

While at it, this commit also fixes up some neighboring lines where
statements were needlessly split over 2 lines to improve readability.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-sensor-custom.c                  |  2 +-
 drivers/hid/hid-sensor-hub.c                     | 13 ++++++++++---
 drivers/iio/accel/hid-sensor-accel-3d.c          |  5 ++++-
 drivers/iio/gyro/hid-sensor-gyro-3d.c            |  5 ++++-
 drivers/iio/humidity/hid-sensor-humidity.c       |  3 ++-
 drivers/iio/light/hid-sensor-als.c               |  8 +++++---
 drivers/iio/light/hid-sensor-prox.c              |  8 +++++---
 drivers/iio/magnetometer/hid-sensor-magn-3d.c    |  8 +++++---
 drivers/iio/orientation/hid-sensor-incl-3d.c     |  8 +++++---
 drivers/iio/pressure/hid-sensor-press.c          |  8 +++++---
 drivers/iio/temperature/hid-sensor-temperature.c |  3 ++-
 drivers/rtc/rtc-hid-sensor-time.c                |  2 +-
 include/linux/hid-sensor-hub.h                   |  4 +++-
 13 files changed, 52 insertions(+), 25 deletions(-)

diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c
index 0bcf041368c7..574126b649e9 100644
--- a/drivers/hid/hid-sensor-custom.c
+++ b/drivers/hid/hid-sensor-custom.c
@@ -358,7 +358,7 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr,
 						sensor_inst->hsdev,
 						sensor_inst->hsdev->usage,
 						usage, report_id,
-						SENSOR_HUB_SYNC);
+						SENSOR_HUB_SYNC, false);
 	} else if (!strncmp(name, "units", strlen("units")))
 		value = sensor_inst->fields[field_index].attribute.units;
 	else if (!strncmp(name, "unit-expo", strlen("unit-expo")))
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index faba542d1b07..b5bd5cb7d532 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -299,7 +299,8 @@ EXPORT_SYMBOL_GPL(sensor_hub_get_feature);
 int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
 					u32 usage_id,
 					u32 attr_usage_id, u32 report_id,
-					enum sensor_hub_read_flags flag)
+					enum sensor_hub_read_flags flag,
+					bool is_signed)
 {
 	struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
 	unsigned long flags;
@@ -331,10 +332,16 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
 						&hsdev->pending.ready, HZ*5);
 		switch (hsdev->pending.raw_size) {
 		case 1:
-			ret_val = *(u8 *)hsdev->pending.raw_data;
+			if (is_signed)
+				ret_val = *(s8 *)hsdev->pending.raw_data;
+			else
+				ret_val = *(u8 *)hsdev->pending.raw_data;
 			break;
 		case 2:
-			ret_val = *(u16 *)hsdev->pending.raw_data;
+			if (is_signed)
+				ret_val = *(s16 *)hsdev->pending.raw_data;
+			else
+				ret_val = *(u16 *)hsdev->pending.raw_data;
 			break;
 		case 4:
 			ret_val = *(u32 *)hsdev->pending.raw_data;
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 2238a26aba63..f573d9c61fc3 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -149,6 +149,7 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
+	s32 min;
 	struct hid_sensor_hub_device *hsdev =
 					accel_state->common_attributes.hsdev;
 
@@ -158,12 +159,14 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 	case 0:
 		hid_sensor_power_state(&accel_state->common_attributes, true);
 		report_id = accel_state->accel[chan->scan_index].report_id;
+		min = accel_state->accel[chan->scan_index].logical_minimum;
 		address = accel_3d_addresses[chan->scan_index];
 		if (report_id >= 0)
 			*val = sensor_hub_input_attr_get_raw_value(
 					accel_state->common_attributes.hsdev,
 					hsdev->usage, address, report_id,
-					SENSOR_HUB_SYNC);
+					SENSOR_HUB_SYNC,
+					min < 0);
 		else {
 			*val = 0;
 			hid_sensor_power_state(&accel_state->common_attributes,
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index c67ce2ac4715..d9192eb41131 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -111,6 +111,7 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
+	s32 min;
 
 	*val = 0;
 	*val2 = 0;
@@ -118,13 +119,15 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 	case 0:
 		hid_sensor_power_state(&gyro_state->common_attributes, true);
 		report_id = gyro_state->gyro[chan->scan_index].report_id;
+		min = gyro_state->gyro[chan->scan_index].logical_minimum;
 		address = gyro_3d_addresses[chan->scan_index];
 		if (report_id >= 0)
 			*val = sensor_hub_input_attr_get_raw_value(
 					gyro_state->common_attributes.hsdev,
 					HID_USAGE_SENSOR_GYRO_3D, address,
 					report_id,
-					SENSOR_HUB_SYNC);
+					SENSOR_HUB_SYNC,
+					min < 0);
 		else {
 			*val = 0;
 			hid_sensor_power_state(&gyro_state->common_attributes,
diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c
index 6e09c1acfe51..e53914d51ec3 100644
--- a/drivers/iio/humidity/hid-sensor-humidity.c
+++ b/drivers/iio/humidity/hid-sensor-humidity.c
@@ -75,7 +75,8 @@ static int humidity_read_raw(struct iio_dev *indio_dev,
 				HID_USAGE_SENSOR_HUMIDITY,
 				HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
 				humid_st->humidity_attr.report_id,
-				SENSOR_HUB_SYNC);
+				SENSOR_HUB_SYNC,
+				humid_st->humidity_attr.logical_minimum < 0);
 		hid_sensor_power_state(&humid_st->common_attributes, false);
 
 		return IIO_VAL_INT;
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index 059d964772c7..95ca86f50434 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -93,6 +93,7 @@ static int als_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
+	s32 min;
 
 	*val = 0;
 	*val2 = 0;
@@ -102,8 +103,8 @@ static int als_read_raw(struct iio_dev *indio_dev,
 		case  CHANNEL_SCAN_INDEX_INTENSITY:
 		case  CHANNEL_SCAN_INDEX_ILLUM:
 			report_id = als_state->als_illum.report_id;
-			address =
-			HID_USAGE_SENSOR_LIGHT_ILLUM;
+			min = als_state->als_illum.logical_minimum;
+			address = HID_USAGE_SENSOR_LIGHT_ILLUM;
 			break;
 		default:
 			report_id = -1;
@@ -116,7 +117,8 @@ static int als_read_raw(struct iio_dev *indio_dev,
 					als_state->common_attributes.hsdev,
 					HID_USAGE_SENSOR_ALS, address,
 					report_id,
-					SENSOR_HUB_SYNC);
+					SENSOR_HUB_SYNC,
+					min < 0);
 			hid_sensor_power_state(&als_state->common_attributes,
 						false);
 		} else {
diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c
index 73fced8a63b7..8c017abc4ee2 100644
--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -73,6 +73,7 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
+	s32 min;
 
 	*val = 0;
 	*val2 = 0;
@@ -81,8 +82,8 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 		switch (chan->scan_index) {
 		case  CHANNEL_SCAN_INDEX_PRESENCE:
 			report_id = prox_state->prox_attr.report_id;
-			address =
-			HID_USAGE_SENSOR_HUMAN_PRESENCE;
+			min = prox_state->prox_attr.logical_minimum;
+			address = HID_USAGE_SENSOR_HUMAN_PRESENCE;
 			break;
 		default:
 			report_id = -1;
@@ -95,7 +96,8 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 				prox_state->common_attributes.hsdev,
 				HID_USAGE_SENSOR_PROX, address,
 				report_id,
-				SENSOR_HUB_SYNC);
+				SENSOR_HUB_SYNC,
+				min < 0);
 			hid_sensor_power_state(&prox_state->common_attributes,
 						false);
 		} else {
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index 0e791b02ed4a..b495107bd173 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -163,21 +163,23 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
+	s32 min;
 
 	*val = 0;
 	*val2 = 0;
 	switch (mask) {
 	case 0:
 		hid_sensor_power_state(&magn_state->magn_flux_attributes, true);
-		report_id =
-			magn_state->magn[chan->address].report_id;
+		report_id = magn_state->magn[chan->address].report_id;
+		min = magn_state->magn[chan->address].logical_minimum;
 		address = magn_3d_addresses[chan->address];
 		if (report_id >= 0)
 			*val = sensor_hub_input_attr_get_raw_value(
 				magn_state->magn_flux_attributes.hsdev,
 				HID_USAGE_SENSOR_COMPASS_3D, address,
 				report_id,
-				SENSOR_HUB_SYNC);
+				SENSOR_HUB_SYNC,
+				min < 0);
 		else {
 			*val = 0;
 			hid_sensor_power_state(
diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c
index fd1b3696ee42..16c744bef021 100644
--- a/drivers/iio/orientation/hid-sensor-incl-3d.c
+++ b/drivers/iio/orientation/hid-sensor-incl-3d.c
@@ -111,21 +111,23 @@ static int incl_3d_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
+	s32 min;
 
 	*val = 0;
 	*val2 = 0;
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		hid_sensor_power_state(&incl_state->common_attributes, true);
-		report_id =
-			incl_state->incl[chan->scan_index].report_id;
+		report_id = incl_state->incl[chan->scan_index].report_id;
+		min = incl_state->incl[chan->scan_index].logical_minimum;
 		address = incl_3d_addresses[chan->scan_index];
 		if (report_id >= 0)
 			*val = sensor_hub_input_attr_get_raw_value(
 				incl_state->common_attributes.hsdev,
 				HID_USAGE_SENSOR_INCLINOMETER_3D, address,
 				report_id,
-				SENSOR_HUB_SYNC);
+				SENSOR_HUB_SYNC,
+				min < 0);
 		else {
 			hid_sensor_power_state(&incl_state->common_attributes,
 						false);
diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c
index 6848d8c80eff..1c49ef78f888 100644
--- a/drivers/iio/pressure/hid-sensor-press.c
+++ b/drivers/iio/pressure/hid-sensor-press.c
@@ -77,6 +77,7 @@ static int press_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
+	s32 min;
 
 	*val = 0;
 	*val2 = 0;
@@ -85,8 +86,8 @@ static int press_read_raw(struct iio_dev *indio_dev,
 		switch (chan->scan_index) {
 		case  CHANNEL_SCAN_INDEX_PRESSURE:
 			report_id = press_state->press_attr.report_id;
-			address =
-			HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE;
+			min = press_state->press_attr.logical_minimum;
+			address = HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE;
 			break;
 		default:
 			report_id = -1;
@@ -99,7 +100,8 @@ static int press_read_raw(struct iio_dev *indio_dev,
 				press_state->common_attributes.hsdev,
 				HID_USAGE_SENSOR_PRESSURE, address,
 				report_id,
-				SENSOR_HUB_SYNC);
+				SENSOR_HUB_SYNC,
+				min < 0);
 			hid_sensor_power_state(&press_state->common_attributes,
 						false);
 		} else {
diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
index c01efeca4002..6ed5cd5742f1 100644
--- a/drivers/iio/temperature/hid-sensor-temperature.c
+++ b/drivers/iio/temperature/hid-sensor-temperature.c
@@ -76,7 +76,8 @@ static int temperature_read_raw(struct iio_dev *indio_dev,
 			HID_USAGE_SENSOR_TEMPERATURE,
 			HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE,
 			temp_st->temperature_attr.report_id,
-			SENSOR_HUB_SYNC);
+			SENSOR_HUB_SYNC,
+			temp_st->temperature_attr.logical_minimum < 0);
 		hid_sensor_power_state(
 				&temp_st->common_attributes,
 				false);
diff --git a/drivers/rtc/rtc-hid-sensor-time.c b/drivers/rtc/rtc-hid-sensor-time.c
index 2751dba850c6..3e1abb455472 100644
--- a/drivers/rtc/rtc-hid-sensor-time.c
+++ b/drivers/rtc/rtc-hid-sensor-time.c
@@ -213,7 +213,7 @@ static int hid_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	/* get a report with all values through requesting one value */
 	sensor_hub_input_attr_get_raw_value(time_state->common_attributes.hsdev,
 			HID_USAGE_SENSOR_TIME, hid_time_addresses[0],
-			time_state->info[0].report_id, SENSOR_HUB_SYNC);
+			time_state->info[0].report_id, SENSOR_HUB_SYNC, false);
 	/* wait for all values (event) */
 	ret = wait_for_completion_killable_timeout(
 			&time_state->comp_last_time, HZ*6);
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index fc7aae64dcde..000de6da3b1b 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -177,6 +177,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
 * @attr_usage_id:	Attribute usage id as per spec
 * @report_id:	Report id to look for
 * @flag:      Synchronous or asynchronous read
+* @is_signed:   If true then fields < 32 bits will be sign-extended
 *
 * Issues a synchronous or asynchronous read request for an input attribute.
 * Returns data upto 32 bits.
@@ -190,7 +191,8 @@ enum sensor_hub_read_flags {
 int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
  					u32 usage_id,
  					u32 attr_usage_id, u32 report_id,
- 					enum sensor_hub_read_flags flag
+					enum sensor_hub_read_flags flag,
+					bool is_signed
 );
 
 /**
-- 
2.17.1

[PATCH AUTOSEL 4.14 17/69] netfilter: xt_hashlimit: fix a possible memory leak in htable_create()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit b4e955e9f372035361fbc6f07b21fe2cc6a5be4a ]

In the htable_create(), hinfo is allocated by vmalloc()
So that if error occurred, hinfo should be freed.

Fixes: 11d5f15723c9 ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/xt_hashlimit.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 0c034597b9b8..fe8e8a1622b5 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -295,9 +295,10 @@ static int htable_create(struct net *net, struct hashlimit_cfg3 *cfg,
 
 	/* copy match config into hashtable config */
 	ret = cfg_copy(&hinfo->cfg, (void *)cfg, 3);
-
-	if (ret)
+	if (ret) {
+		vfree(hinfo);
 		return ret;
+	}
 
 	hinfo->cfg.size = size;
 	if (hinfo->cfg.max == 0)
@@ -814,7 +815,6 @@ hashlimit_mt_v1(const struct sk_buff *skb, struct xt_action_param *par)
 	int ret;
 
 	ret = cfg_copy(&cfg, (void *)&info->cfg, 1);
-
 	if (ret)
 		return ret;
 
@@ -830,7 +830,6 @@ hashlimit_mt_v2(const struct sk_buff *skb, struct xt_action_param *par)
 	int ret;
 
 	ret = cfg_copy(&cfg, (void *)&info->cfg, 2);
-
 	if (ret)
 		return ret;
 
@@ -920,7 +919,6 @@ static int hashlimit_mt_check_v1(const struct xt_mtchk_param *par)
 		return ret;
 
 	ret = cfg_copy(&cfg, (void *)&info->cfg, 1);
-
 	if (ret)
 		return ret;
 
@@ -939,7 +937,6 @@ static int hashlimit_mt_check_v2(const struct xt_mtchk_param *par)
 		return ret;
 
 	ret = cfg_copy(&cfg, (void *)&info->cfg, 2);
-
 	if (ret)
 		return ret;
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 18/69] hwmon: (w83795) temp4_type has writable permission

[Sasha Levin]

From: Huacai Chen <chenhc@lemote.com>

[ Upstream commit 09aaf6813cfca4c18034fda7a43e68763f34abb1 ]

Both datasheet and comments of store_temp_mode() tell us that temp1~4_type
is writable, so fix it.

Signed-off-by: Yao Wang <wangyao@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/w83795.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 49276bbdac3d..1bb80f992aa8 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -1691,7 +1691,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
  * somewhere else in the code
  */
 #define SENSOR_ATTR_TEMP(index) {					\
-	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
+	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
 	SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp,		\
 		NULL, TEMP_READ, index - 1),				\
-- 
2.17.1

[PATCH AUTOSEL 4.14 19/69] perf tools: Restore proper cwd on return from mnt namespace

[Sasha Levin]

From: Jiri Olsa <jolsa@kernel.org>

[ Upstream commit b01c1f69c8660eaeab7d365cd570103c5c073a02 ]

When reporting on 'record' server we try to retrieve/use the mnt
namespace of the profiled tasks. We use following API with cookie to
hold the return namespace, roughly:

  nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc)
    setns(newns, 0);
  ...
  new ns related open..
  ...
  nsinfo__mountns_exit(struct nscookie *nc)
    setns(nc->oldns)

Once finished we setns to old namespace, which also sets the current
working directory (cwd) to "/", trashing the cwd we had.

This is mostly fine, because we use absolute paths almost everywhere,
but it screws up 'perf diff':

  # perf diff
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  ...

Adding the current working directory to be part of the cookie and
restoring it in the nsinfo__mountns_exit call.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 843ff37bb59e ("perf symbols: Find symbols in different mount namespace")
Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org
[ No need to check for NULL args for free(), use zfree() for struct members ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/namespaces.c | 17 +++++++++++++++--
 tools/perf/util/namespaces.h |  1 +
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/namespaces.c b/tools/perf/util/namespaces.c
index 1ef0049860a8..eadc7ddacbf6 100644
--- a/tools/perf/util/namespaces.c
+++ b/tools/perf/util/namespaces.c
@@ -17,6 +17,7 @@
 #include <stdio.h>
 #include <string.h>
 #include <unistd.h>
+#include <asm/bug.h>
 
 struct namespaces *namespaces__new(struct namespaces_event *event)
 {
@@ -185,6 +186,7 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
 	char curpath[PATH_MAX];
 	int oldns = -1;
 	int newns = -1;
+	char *oldcwd = NULL;
 
 	if (nc == NULL)
 		return;
@@ -198,9 +200,13 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
 	if (snprintf(curpath, PATH_MAX, "/proc/self/ns/mnt") >= PATH_MAX)
 		return;
 
+	oldcwd = get_current_dir_name();
+	if (!oldcwd)
+		return;
+
 	oldns = open(curpath, O_RDONLY);
 	if (oldns < 0)
-		return;
+		goto errout;
 
 	newns = open(nsi->mntns_path, O_RDONLY);
 	if (newns < 0)
@@ -209,11 +215,13 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
 	if (setns(newns, CLONE_NEWNS) < 0)
 		goto errout;
 
+	nc->oldcwd = oldcwd;
 	nc->oldns = oldns;
 	nc->newns = newns;
 	return;
 
 errout:
+	free(oldcwd);
 	if (oldns > -1)
 		close(oldns);
 	if (newns > -1)
@@ -222,11 +230,16 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
 
 void nsinfo__mountns_exit(struct nscookie *nc)
 {
-	if (nc == NULL || nc->oldns == -1 || nc->newns == -1)
+	if (nc == NULL || nc->oldns == -1 || nc->newns == -1 || !nc->oldcwd)
 		return;
 
 	setns(nc->oldns, CLONE_NEWNS);
 
+	if (nc->oldcwd) {
+		WARN_ON_ONCE(chdir(nc->oldcwd));
+		zfree(&nc->oldcwd);
+	}
+
 	if (nc->oldns > -1) {
 		close(nc->oldns);
 		nc->oldns = -1;
diff --git a/tools/perf/util/namespaces.h b/tools/perf/util/namespaces.h
index 05d82601c9a6..23584a6dd048 100644
--- a/tools/perf/util/namespaces.h
+++ b/tools/perf/util/namespaces.h
@@ -36,6 +36,7 @@ struct nsinfo {
 struct nscookie {
 	int			oldns;
 	int			newns;
+	char			*oldcwd;
 };
 
 int nsinfo__init(struct nsinfo *nsi);
-- 
2.17.1

[PATCH AUTOSEL 4.14 20/69] PCI: imx6: Fix link training status detection in link up check

[Sasha Levin]

From: Trent Piepho <tpiepho@impinj.com>

[ Upstream commit 68bc10bf992180f269816ff3d22eb30383138577 ]

This bug was introduced in the interaction for two commits on either
branch of the merge commit 562df5c8521e ("Merge branch
'pci/host-designware' into next").

Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into
imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll
the link status register directly, checking for link up and not
training, and made imx6_pcie_link_up() only check the link up bit (once,
not a polling loop).

While commit 886bc5ceb5cc ("PCI: designware: Add generic
dw_pcie_wait_for_link()"), replaced the loop in
imx6_pcie_wait_for_link() with a call to a new dwc core function, which
polled imx6_pcie_link_up(), which still checked both link up and not
training in a loop.

When these two commits were merged, the version of
imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated
the link training check placed there by 4d107d3b5a68. However, the
version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which
eliminated the link training check that had been there and was moved to
imx6_pcie_wait_for_link().

The result was the link training check got lost for the imx6 driver.

Eliminate imx6_pcie_link_up() so that the default handler,
dw_pcie_link_up(), is used instead. The default handler has the correct
code, which checks for link up and also that it still is not training,
fixing the regression.

Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next")
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/dwc/pci-imx6.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
index b73483534a5b..1f1069b70e45 100644
--- a/drivers/pci/dwc/pci-imx6.c
+++ b/drivers/pci/dwc/pci-imx6.c
@@ -83,8 +83,6 @@ struct imx6_pcie {
 #define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
 #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
 #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP		(1 << 4)
 
 #define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
 #define PCIE_PHY_CTRL_DATA_LOC 0
@@ -653,12 +651,6 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 
-static int imx6_pcie_link_up(struct dw_pcie *pci)
-{
-	return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) &
-			PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
-}
-
 static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
 	.host_init = imx6_pcie_host_init,
 };
@@ -701,7 +693,7 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
-	.link_up = imx6_pcie_link_up,
+	/* No special ops needed, but pcie-designware still expects this struct */
 };
 
 static int imx6_pcie_probe(struct platform_device *pdev)
-- 
2.17.1

[PATCH AUTOSEL 4.14 21/69] objtool: Fix double-free in .cold detection error path

[Sasha Levin]

From: Artem Savkov <asavkov@redhat.com>

[ Upstream commit 0b9301fb632f7111a3293a30cc5b20f1b82ed08d ]

If read_symbols() fails during second list traversal (the one dealing
with ".cold" subfunctions) it frees the symbol, but never deletes it
from the list/hash_table resulting in symbol being freed again in
elf_close(). Fix it by just returning an error, leaving cleanup to
elf_close().

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/elf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index 0d1acb704f64..3616d626991e 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -312,7 +312,7 @@ static int read_symbols(struct elf *elf)
 			if (!pfunc) {
 				WARN("%s(): can't find parent function",
 				     sym->name);
-				goto err;
+				return -1;
 			}
 
 			sym->pfunc = pfunc;
-- 
2.17.1

[PATCH AUTOSEL 4.14 22/69] objtool: Fix segfault in .cold detection with -ffunction-sections

[Sasha Levin]

From: Artem Savkov <asavkov@redhat.com>

[ Upstream commit 22566c1603030f0a036ad564634b064ad1a55db2 ]

Because find_symbol_by_name() traverses the same lists as
read_symbols(), changing sym->name in place without copying it affects
the result of find_symbol_by_name().  In the case where a ".cold"
function precedes its parent in sec->symbol_list, it can result in a
function being considered a parent of itself. This leads to function
length being set to 0 and other consequent side-effects including a
segfault in add_switch_table().  The effects of this bug are only
visible when building with -ffunction-sections in KCFLAGS.

Fix by copying the search string instead of modifying it in place.

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/elf.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index 3616d626991e..dd4ed7c3c062 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -31,6 +31,8 @@
 #include "elf.h"
 #include "warn.h"
 
+#define MAX_NAME_LEN 128
+
 struct section *find_section_by_name(struct elf *elf, const char *name)
 {
 	struct section *sec;
@@ -298,6 +300,8 @@ static int read_symbols(struct elf *elf)
 	/* Create parent/child links for any cold subfunctions */
 	list_for_each_entry(sec, &elf->sections, list) {
 		list_for_each_entry(sym, &sec->symbol_list, list) {
+			char pname[MAX_NAME_LEN + 1];
+			size_t pnamelen;
 			if (sym->type != STT_FUNC)
 				continue;
 			sym->pfunc = sym->cfunc = sym;
@@ -305,9 +309,16 @@ static int read_symbols(struct elf *elf)
 			if (!coldstr)
 				continue;
 
-			coldstr[0] = '\0';
-			pfunc = find_symbol_by_name(elf, sym->name);
-			coldstr[0] = '.';
+			pnamelen = coldstr - sym->name;
+			if (pnamelen > MAX_NAME_LEN) {
+				WARN("%s(): parent function name exceeds maximum length of %d characters",
+				     sym->name, MAX_NAME_LEN);
+				return -1;
+			}
+
+			strncpy(pname, sym->name, pnamelen);
+			pname[pnamelen] = '\0';
+			pfunc = find_symbol_by_name(elf, pname);
 
 			if (!pfunc) {
 				WARN("%s(): can't find parent function",
-- 
2.17.1

[PATCH AUTOSEL 4.14 23/69] ARM: dts: at91: sama5d2: use the divided clock for SMC

[Sasha Levin]

From: Romain Izard <romain.izard.pro@gmail.com>

[ Upstream commit 4ab7ca092c3c7ac8b16aa28eba723a8868f82f14 ]

The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.

Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.

Fix the device tree, and the performance of Flash access is improved.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sama5d2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index b1a26b42d190..a8e4b89097d9 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -308,7 +308,7 @@
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";
 
 			nand_controller: nand-controller {
-- 
2.17.1

[PATCH AUTOSEL 4.14 24/69] Btrfs: send, fix infinite loop due to directory rename dependencies

[Sasha Levin]

From: Robbie Ko <robbieko@synology.com>

[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]

When doing an incremental send, due to the need of delaying directory move
(rename) operations we can end up in infinite loop at
apply_children_dir_moves().

An example scenario that triggers this problem is described below, where
directory names correspond to the numbers of their respective inodes.

Parent snapshot:

 .
 |--- 261/
       |--- 271/
             |--- 266/
                   |--- 259/
                   |--- 260/
                   |     |--- 267
                   |
                   |--- 264/
                   |     |--- 258/
                   |           |--- 257/
                   |
                   |--- 265/
                   |--- 268/
                   |--- 269/
                   |     |--- 262/
                   |
                   |--- 270/
                   |--- 272/
                   |     |--- 263/
                   |     |--- 275/
                   |
                   |--- 274/
                         |--- 273/

Send snapshot:

 .
 |-- 275/
      |-- 274/
           |-- 273/
                |-- 262/
                     |-- 269/
                          |-- 258/
                               |-- 271/
                                    |-- 268/
                                         |-- 267/
                                              |-- 270/
                                                   |-- 259/
                                                   |    |-- 265/
                                                   |
                                                   |-- 272/
                                                        |-- 257/
                                                             |-- 260/
                                                             |-- 264/
                                                                  |-- 263/
                                                                       |-- 261/
                                                                            |-- 266/

When processing inode 257 we delay its move (rename) operation because its
new parent in the send snapshot, inode 272, was not yet processed. Then
when processing inode 272, we delay the move operation for that inode
because inode 274 is its ancestor in the send snapshot. Finally we delay
the move operation for inode 274 when processing it because inode 275 is
its new parent in the send snapshot and was not yet moved.

When finishing processing inode 275, we start to do the move operations
that were previously delayed (at apply_children_dir_moves()), resulting in
the following iterations:

1) We issue the move operation for inode 274;

2) Because inode 262 depended on the move operation of inode 274 (it was
   delayed because 274 is its ancestor in the send snapshot), we issue the
   move operation for inode 262;

3) We issue the move operation for inode 272, because it was delayed by
   inode 274 too (ancestor of 272 in the send snapshot);

4) We issue the move operation for inode 269 (it was delayed by 262);

5) We issue the move operation for inode 257 (it was delayed by 272);

6) We issue the move operation for inode 260 (it was delayed by 272);

7) We issue the move operation for inode 258 (it was delayed by 269);

8) We issue the move operation for inode 264 (it was delayed by 257);

9) We issue the move operation for inode 271 (it was delayed by 258);

10) We issue the move operation for inode 263 (it was delayed by 264);

11) We issue the move operation for inode 268 (it was delayed by 271);

12) We verify if we can issue the move operation for inode 270 (it was
    delayed by 271). We detect a path loop in the current state, because
    inode 267 needs to be moved first before we can issue the move
    operation for inode 270. So we delay again the move operation for
    inode 270, this time we will attempt to do it after inode 267 is
    moved;

13) We issue the move operation for inode 261 (it was delayed by 263);

14) We verify if we can issue the move operation for inode 266 (it was
    delayed by 263). We detect a path loop in the current state, because
    inode 270 needs to be moved first before we can issue the move
    operation for inode 266. So we delay again the move operation for
    inode 266, this time we will attempt to do it after inode 270 is
    moved (its move operation was delayed in step 12);

15) We issue the move operation for inode 267 (it was delayed by 268);

16) We verify if we can issue the move operation for inode 266 (it was
    delayed by 270). We detect a path loop in the current state, because
    inode 270 needs to be moved first before we can issue the move
    operation for inode 266. So we delay again the move operation for
    inode 266, this time we will attempt to do it after inode 270 is
    moved (its move operation was delayed in step 12). So here we added
    again the same delayed move operation that we added in step 14;

17) We attempt again to see if we can issue the move operation for inode
    266, and as in step 16, we realize we can not due to a path loop in
    the current state due to a dependency on inode 270. Again we delay
    inode's 266 rename to happen after inode's 270 move operation, adding
    the same dependency to the empty stack that we did in steps 14 and 16.
    The next iteration will pick the same move dependency on the stack
    (the only entry) and realize again there is still a path loop and then
    again the same dependency to the stack, over and over, resulting in
    an infinite loop.

So fix this by preventing adding the same move dependency entries to the
stack by removing each pending move record from the red black tree of
pending moves. This way the next call to get_pending_dir_moves() will
not return anything for the current parent inode.

A test case for fstests, with this reproducer, follows soon.

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Wrote changelog with example and more clear explanation]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/send.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index baf5a4cd7ffc..3f22af96d63b 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3354,7 +3354,8 @@ static void free_pending_move(struct send_ctx *sctx, struct pending_dir_move *m)
 	kfree(m);
 }
 
-static void tail_append_pending_moves(struct pending_dir_move *moves,
+static void tail_append_pending_moves(struct send_ctx *sctx,
+				      struct pending_dir_move *moves,
 				      struct list_head *stack)
 {
 	if (list_empty(&moves->list)) {
@@ -3365,6 +3366,10 @@ static void tail_append_pending_moves(struct pending_dir_move *moves,
 		list_add_tail(&moves->list, stack);
 		list_splice_tail(&list, stack);
 	}
+	if (!RB_EMPTY_NODE(&moves->node)) {
+		rb_erase(&moves->node, &sctx->pending_dir_moves);
+		RB_CLEAR_NODE(&moves->node);
+	}
 }
 
 static int apply_children_dir_moves(struct send_ctx *sctx)
@@ -3379,7 +3384,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx)
 		return 0;
 
 	INIT_LIST_HEAD(&stack);
-	tail_append_pending_moves(pm, &stack);
+	tail_append_pending_moves(sctx, pm, &stack);
 
 	while (!list_empty(&stack)) {
 		pm = list_first_entry(&stack, struct pending_dir_move, list);
@@ -3390,7 +3395,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx)
 			goto out;
 		pm = get_pending_dir_moves(sctx, parent_ino);
 		if (pm)
-			tail_append_pending_moves(pm, &stack);
+			tail_append_pending_moves(sctx, pm, &stack);
 	}
 	return 0;
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 25/69] RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR

[Sasha Levin]

From: Majd Dibbiny <majd@mellanox.com>

[ Upstream commit 074fca3a18e7e1e0d4d7dcc9d7badc43b90232f4 ]

Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the
current fence will be SMALL instead of Normal Fence.

Without this patch krping doesn't work on CX-5 devices and throws
following error:

The error messages are from CX5 driver are: (from server side)
[ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434017] 00000000 00000000 00000000 00000000
[ 710.434018] 00000000 93003204 100000b8 000524d2
[ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32

Fixed the logic to set the correct fence type.

Fixes: 6e8484c5cf07 ("RDMA/mlx5: set UMR wqe fence according to HCA cap")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/qp.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index dfc190055167..964c3a0bbf16 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -3928,17 +3928,18 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 			goto out;
 		}
 
-		if (wr->opcode == IB_WR_LOCAL_INV ||
-		    wr->opcode == IB_WR_REG_MR) {
+		if (wr->opcode == IB_WR_REG_MR) {
 			fence = dev->umr_fence;
 			next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL;
-		} else if (wr->send_flags & IB_SEND_FENCE) {
-			if (qp->next_fence)
-				fence = MLX5_FENCE_MODE_SMALL_AND_FENCE;
-			else
-				fence = MLX5_FENCE_MODE_FENCE;
-		} else {
-			fence = qp->next_fence;
+		} else  {
+			if (wr->send_flags & IB_SEND_FENCE) {
+				if (qp->next_fence)
+					fence = MLX5_FENCE_MODE_SMALL_AND_FENCE;
+				else
+					fence = MLX5_FENCE_MODE_FENCE;
+			} else {
+				fence = qp->next_fence;
+			}
 		}
 
 		switch (ibqp->qp_type) {
-- 
2.17.1

[PATCH AUTOSEL 4.14 26/69] RDMA/rdmavt: Fix rvt_create_ah function signature

[Sasha Levin]

From: Kamal Heib <kamalheib1@gmail.com>

[ Upstream commit 4f32fb921b153ae9ea280e02a3e91509fffc03d3 ]

rdmavt uses a crazy system that looses the type checking when assinging
functions to struct ib_device function pointers. Because of this the
signature to this function was not changed when the below commit revised
things.

Fix the signature so we are not calling a function pointer with a
mismatched signature.

Fixes: 477864c8fcd9 ("IB/core: Let create_ah return extended response to user")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rdmavt/ah.c | 4 +++-
 drivers/infiniband/sw/rdmavt/ah.h | 3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/sw/rdmavt/ah.c b/drivers/infiniband/sw/rdmavt/ah.c
index ba3639a0d77c..48ea5b8207f0 100644
--- a/drivers/infiniband/sw/rdmavt/ah.c
+++ b/drivers/infiniband/sw/rdmavt/ah.c
@@ -91,13 +91,15 @@ EXPORT_SYMBOL(rvt_check_ah);
  * rvt_create_ah - create an address handle
  * @pd: the protection domain
  * @ah_attr: the attributes of the AH
+ * @udata: pointer to user's input output buffer information.
  *
  * This may be called from interrupt context.
  *
  * Return: newly allocated ah
  */
 struct ib_ah *rvt_create_ah(struct ib_pd *pd,
-			    struct rdma_ah_attr *ah_attr)
+			    struct rdma_ah_attr *ah_attr,
+			    struct ib_udata *udata)
 {
 	struct rvt_ah *ah;
 	struct rvt_dev_info *dev = ib_to_rvt(pd->device);
diff --git a/drivers/infiniband/sw/rdmavt/ah.h b/drivers/infiniband/sw/rdmavt/ah.h
index 16105af99189..25271b48a683 100644
--- a/drivers/infiniband/sw/rdmavt/ah.h
+++ b/drivers/infiniband/sw/rdmavt/ah.h
@@ -51,7 +51,8 @@
 #include <rdma/rdma_vt.h>
 
 struct ib_ah *rvt_create_ah(struct ib_pd *pd,
-			    struct rdma_ah_attr *ah_attr);
+			    struct rdma_ah_attr *ah_attr,
+			    struct ib_udata *udata);
 int rvt_destroy_ah(struct ib_ah *ibah);
 int rvt_modify_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr);
 int rvt_query_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr);
-- 
2.17.1

[PATCH AUTOSEL 4.14 27/69] uprobes: Fix handle_swbp() vs. unregister() + register() race once more

[Sasha Levin]

From: Andrea Parri <andrea.parri@amarulasolutions.com>

[ Upstream commit 09d3f015d1e1b4fee7e9bbdcf54201d239393391 ]

Commit:

  142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")

added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb()
memory barriers, to ensure that handle_swbp() uses fully-initialized
uprobes only.

However, the smp_rmb() is mis-placed: this barrier should be placed
after handle_swbp() has tested for the flag, thus guaranteeing that
(program-order) subsequent loads from the uprobe can see the initial
stores performed by prepare_uprobe().

Move the smp_rmb() accordingly.  Also amend the comments associated
to the two memory barriers to indicate their actual locations.

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org
Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/uprobes.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 267f6ef91d97..01941cffa9c2 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -616,7 +616,7 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file,
 	BUG_ON((uprobe->offset & ~PAGE_MASK) +
 			UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
 
-	smp_wmb(); /* pairs with rmb() in find_active_uprobe() */
+	smp_wmb(); /* pairs with the smp_rmb() in handle_swbp() */
 	set_bit(UPROBE_COPY_INSN, &uprobe->flags);
 
  out:
@@ -1910,10 +1910,18 @@ static void handle_swbp(struct pt_regs *regs)
 	 * After we hit the bp, _unregister + _register can install the
 	 * new and not-yet-analyzed uprobe at the same address, restart.
 	 */
-	smp_rmb(); /* pairs with wmb() in install_breakpoint() */
 	if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags)))
 		goto out;
 
+	/*
+	 * Pairs with the smp_wmb() in prepare_uprobe().
+	 *
+	 * Guarantees that if we see the UPROBE_COPY_INSN bit set, then
+	 * we must also see the stores to &uprobe->arch performed by the
+	 * prepare_uprobe() call.
+	 */
+	smp_rmb();
+
 	/* Tracing handlers use ->utask to communicate with fetch methods */
 	if (!get_utask())
 		goto out;
-- 
2.17.1

[PATCH AUTOSEL 4.14 28/69] ASoC: omap-mcbsp: Fix latency value calculation for pm_qos

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit dd2f52d8991af9fe0928d59ec502ba52be7bc38d ]

The latency number is in usec for the pm_qos. Correct the calculation to
give us the time in usec

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/omap/omap-mcbsp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 6b40bdbef336..47c2ed5ca492 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -308,9 +308,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 			pkt_size = channels;
 		}
 
-		latency = ((((buffer_size - pkt_size) / channels) * 1000)
-				 / (params->rate_num / params->rate_den));
-
+		latency = (buffer_size - pkt_size) / channels;
+		latency = latency * USEC_PER_SEC /
+			  (params->rate_num / params->rate_den);
 		mcbsp->latency[substream->stream] = latency;
 
 		omap_mcbsp_set_threshold(substream, pkt_size);
-- 
2.17.1

[PATCH AUTOSEL 4.14 29/69] ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 373a500e34aea97971c9d71e45edad458d3da98f ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without under of overrun.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/omap/omap-mcpdm.c | 43 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
index 64609c77a79d..44ffeb71cd1d 100644
--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -54,6 +54,8 @@ struct omap_mcpdm {
 	unsigned long phys_base;
 	void __iomem *io_base;
 	int irq;
+	struct pm_qos_request pm_qos_req;
+	int latency[2];
 
 	struct mutex mutex;
 
@@ -277,6 +279,9 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
 				  struct snd_soc_dai *dai)
 {
 	struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+	int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+	int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+	int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
 
 	mutex_lock(&mcpdm->mutex);
 
@@ -289,6 +294,14 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
 		}
 	}
 
+	if (mcpdm->latency[stream2])
+		pm_qos_update_request(&mcpdm->pm_qos_req,
+				      mcpdm->latency[stream2]);
+	else if (mcpdm->latency[stream1])
+		pm_qos_remove_request(&mcpdm->pm_qos_req);
+
+	mcpdm->latency[stream1] = 0;
+
 	mutex_unlock(&mcpdm->mutex);
 }
 
@@ -300,7 +313,7 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
 	int stream = substream->stream;
 	struct snd_dmaengine_dai_dma_data *dma_data;
 	u32 threshold;
-	int channels;
+	int channels, latency;
 	int link_mask = 0;
 
 	channels = params_channels(params);
@@ -340,14 +353,25 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
 
 		dma_data->maxburst =
 				(MCPDM_DN_THRES_MAX - threshold) * channels;
+		latency = threshold;
 	} else {
 		/* If playback is not running assume a stereo stream to come */
 		if (!mcpdm->config[!stream].link_mask)
 			mcpdm->config[!stream].link_mask = (0x3 << 3);
 
 		dma_data->maxburst = threshold * channels;
+		latency = (MCPDM_DN_THRES_MAX - threshold);
 	}
 
+	/*
+	 * The DMA must act to a DMA request within latency time (usec) to avoid
+	 * under/overflow
+	 */
+	mcpdm->latency[stream] = latency * USEC_PER_SEC / params_rate(params);
+
+	if (!mcpdm->latency[stream])
+		mcpdm->latency[stream] = 10;
+
 	/* Check if we need to restart McPDM with this stream */
 	if (mcpdm->config[stream].link_mask &&
 	    mcpdm->config[stream].link_mask != link_mask)
@@ -362,6 +386,20 @@ static int omap_mcpdm_prepare(struct snd_pcm_substream *substream,
 				  struct snd_soc_dai *dai)
 {
 	struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+	struct pm_qos_request *pm_qos_req = &mcpdm->pm_qos_req;
+	int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+	int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+	int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+	int latency = mcpdm->latency[stream2];
+
+	/* Prevent omap hardware from hitting off between FIFO fills */
+	if (!latency || mcpdm->latency[stream1] < latency)
+		latency = mcpdm->latency[stream1];
+
+	if (pm_qos_request_active(pm_qos_req))
+		pm_qos_update_request(pm_qos_req, latency);
+	else if (latency)
+		pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, latency);
 
 	if (!omap_mcpdm_active(mcpdm)) {
 		omap_mcpdm_start(mcpdm);
@@ -423,6 +461,9 @@ static int omap_mcpdm_remove(struct snd_soc_dai *dai)
 	free_irq(mcpdm->irq, (void *)mcpdm);
 	pm_runtime_disable(mcpdm->dev);
 
+	if (pm_qos_request_active(&mcpdm->pm_qos_req))
+		pm_qos_remove_request(&mcpdm->pm_qos_req);
+
 	return 0;
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 30/69] ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without overrun.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/omap/omap-dmic.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
index 09db2aec12a3..776e809a8aab 100644
--- a/sound/soc/omap/omap-dmic.c
+++ b/sound/soc/omap/omap-dmic.c
@@ -48,6 +48,8 @@ struct omap_dmic {
 	struct device *dev;
 	void __iomem *io_base;
 	struct clk *fclk;
+	struct pm_qos_request pm_qos_req;
+	int latency;
 	int fclk_freq;
 	int out_freq;
 	int clk_div;
@@ -124,6 +126,8 @@ static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
 
 	mutex_lock(&dmic->mutex);
 
+	pm_qos_remove_request(&dmic->pm_qos_req);
+
 	if (!dai->active)
 		dmic->active = 0;
 
@@ -226,6 +230,8 @@ static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream,
 	/* packet size is threshold * channels */
 	dma_data = snd_soc_dai_get_dma_data(dai, substream);
 	dma_data->maxburst = dmic->threshold * channels;
+	dmic->latency = (OMAP_DMIC_THRES_MAX - dmic->threshold) * USEC_PER_SEC /
+			params_rate(params);
 
 	return 0;
 }
@@ -236,6 +242,9 @@ static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream,
 	struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
 	u32 ctrl;
 
+	if (pm_qos_request_active(&dmic->pm_qos_req))
+		pm_qos_update_request(&dmic->pm_qos_req, dmic->latency);
+
 	/* Configure uplink threshold */
 	omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold);
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 31/69] exportfs: do not read dentry after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 2084ac6c505a58f7efdec13eba633c6aaa085ca5 ]

The function dentry_connected calls dput(dentry) to drop the previously
acquired reference to dentry. In this case, dentry can be released.
After that, IS_ROOT(dentry) checks the condition
(dentry == dentry->d_parent), which may result in a use-after-free bug.
This patch directly compares dentry with its parent obtained before
dropping the reference.

Fixes: a056cc8934c("exportfs: stop retrying once we race with
rename/remove")

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/exportfs/expfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index 329a5d103846..c22cc9d2a5c9 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -77,7 +77,7 @@ static bool dentry_connected(struct dentry *dentry)
 		struct dentry *parent = dget_parent(dentry);
 
 		dput(dentry);
-		if (IS_ROOT(dentry)) {
+		if (dentry == parent) {
 			dput(parent);
 			return false;
 		}
-- 
2.17.1

[PATCH AUTOSEL 4.14 32/69] bpf: fix check of allowed specifiers in bpf_trace_printk

[Sasha Levin]

From: Martynas Pumputis <m@lambda.lt>

[ Upstream commit 1efb6ee3edea57f57f9fb05dba8dcb3f7333f61f ]

A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.

Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/bpf_trace.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 6350f64d5aa4..f9dd8fd055a6 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -161,11 +161,13 @@ BPF_CALL_5(bpf_trace_printk, char *, fmt, u32, fmt_size, u64, arg1,
 			i++;
 		} else if (fmt[i] == 'p' || fmt[i] == 's') {
 			mod[fmt_cnt]++;
-			i++;
-			if (!isspace(fmt[i]) && !ispunct(fmt[i]) && fmt[i] != 0)
+			/* disallow any further format extensions */
+			if (fmt[i + 1] != 0 &&
+			    !isspace(fmt[i + 1]) &&
+			    !ispunct(fmt[i + 1]))
 				return -EINVAL;
 			fmt_cnt++;
-			if (fmt[i - 1] == 's') {
+			if (fmt[i] == 's') {
 				if (str_seen)
 					/* allow only one '%s' per fmt string */
 					return -EINVAL;
-- 
2.17.1

[PATCH AUTOSEL 4.14 33/69] ipvs: call ip_vs_dst_notifier earlier than ipv6_dev_notf

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 2a31e4bd9ad255ee40809b5c798c4b1c2b09703b ]

ip_vs_dst_event is supposed to clean up all dst used in ipvs'
destinations when a net dev is going down. But it works only
when the dst's dev is the same as the dev from the event.

Now with the same priority but late registration,
ip_vs_dst_notifier is always called later than ipv6_dev_notf
where the dst's dev is set to lo for NETDEV_DOWN event.

As the dst's dev lo is not the same as the dev from the event
in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work.
Also as these dst have to wait for dest_trash_timer to clean
them up. It would cause some non-permanent kernel warnings:

  unregister_netdevice: waiting for br0 to become free. Usage count = 3

To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf
by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.

Note that for ipv4 route fib_netdev_notifier doesn't set dst's
dev to lo in NETDEV_DOWN event, so this fix is only needed when
IP_VS_IPV6 is defined.

Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 327ebe786eeb..2f45c3ce77ef 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -4012,6 +4012,9 @@ static void __net_exit ip_vs_control_net_cleanup_sysctl(struct netns_ipvs *ipvs)
 
 static struct notifier_block ip_vs_dst_notifier = {
 	.notifier_call = ip_vs_dst_event,
+#ifdef CONFIG_IP_VS_IPV6
+	.priority = ADDRCONF_NOTIFY_PRIORITY + 5,
+#endif
 };
 
 int __net_init ip_vs_control_net_init(struct netns_ipvs *ipvs)
-- 
2.17.1

[PATCH AUTOSEL 4.14 34/69] USB: omap_udc: use devm_request_irq()

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 286afdde1640d8ea8916a0f05e811441fbbf4b9d ]

The current code fails to release the third irq on the error path
(observed by reading the code), and we get also multiple WARNs with
failing gadget drivers due to duplicate IRQ releases. Fix by using
devm_request_irq().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/omap_udc.c | 37 +++++++++----------------------
 1 file changed, 10 insertions(+), 27 deletions(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index f05ba6825bfe..e515c85ef0c5 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2886,8 +2886,8 @@ static int omap_udc_probe(struct platform_device *pdev)
 		udc->clr_halt = UDC_RESET_EP;
 
 	/* USB general purpose IRQ:  ep0, state changes, dma, etc */
-	status = request_irq(pdev->resource[1].start, omap_udc_irq,
-			0, driver_name, udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[1].start,
+				  omap_udc_irq, 0, driver_name, udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[1].start, status);
@@ -2895,20 +2895,20 @@ static int omap_udc_probe(struct platform_device *pdev)
 	}
 
 	/* USB "non-iso" IRQ (PIO for all but ep0) */
-	status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
-			0, "omap_udc pio", udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[2].start,
+				  omap_udc_pio_irq, 0, "omap_udc pio", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[2].start, status);
-		goto cleanup2;
+		goto cleanup1;
 	}
 #ifdef	USE_ISO
-	status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
-			0, "omap_udc iso", udc);
+	status = devm_request_irq(&pdev->dev, pdev->resource[3].start,
+				  omap_udc_iso_irq, 0, "omap_udc iso", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[3].start, status);
-		goto cleanup3;
+		goto cleanup1;
 	}
 #endif
 	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
@@ -2921,22 +2921,11 @@ static int omap_udc_probe(struct platform_device *pdev)
 	create_proc_file();
 	status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
 			omap_udc_release);
-	if (status)
-		goto cleanup4;
-
-	return 0;
+	if (!status)
+		return 0;
 
-cleanup4:
 	remove_proc_file();
 
-#ifdef	USE_ISO
-cleanup3:
-	free_irq(pdev->resource[2].start, udc);
-#endif
-
-cleanup2:
-	free_irq(pdev->resource[1].start, udc);
-
 cleanup1:
 	kfree(udc);
 	udc = NULL;
@@ -2980,12 +2969,6 @@ static int omap_udc_remove(struct platform_device *pdev)
 
 	remove_proc_file();
 
-#ifdef	USE_ISO
-	free_irq(pdev->resource[3].start, udc);
-#endif
-	free_irq(pdev->resource[2].start, udc);
-	free_irq(pdev->resource[1].start, udc);
-
 	if (udc->dc_clk) {
 		if (udc->clk_requested)
 			omap_udc_enable_clock(0);
-- 
2.17.1

[PATCH AUTOSEL 4.14 35/69] USB: omap_udc: fix crashes on probe error and module removal

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 99f700366fcea1aa2fa3c49c99f371670c3c62f8 ]

We currently crash if usb_add_gadget_udc_release() fails, since the
udc->done is not initialized until in the remove function.
Furthermore, on module removal the udc data is accessed although
the release function is already triggered by usb_del_gadget_udc()
early in the function.

Fix by rewriting the release and remove functions, basically moving
all the cleanup into the release function, and doing the completion
only in the module removal case.

The patch fixes omap_udc module probe with a failing gadged, and also
allows the removal of omap_udc. Tested by running "modprobe omap_udc;
modprobe -r omap_udc" in a loop.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/omap_udc.c | 50 ++++++++++++-------------------
 1 file changed, 19 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index e515c85ef0c5..d45dc14ef0a2 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2612,9 +2612,22 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 
 static void omap_udc_release(struct device *dev)
 {
-	complete(udc->done);
+	pullup_disable(udc);
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
+		usb_put_phy(udc->transceiver);
+		udc->transceiver = NULL;
+	}
+	omap_writew(0, UDC_SYSCON1);
+	remove_proc_file();
+	if (udc->dc_clk) {
+		if (udc->clk_requested)
+			omap_udc_enable_clock(0);
+		clk_put(udc->hhc_clk);
+		clk_put(udc->dc_clk);
+	}
+	if (udc->done)
+		complete(udc->done);
 	kfree(udc);
-	udc = NULL;
 }
 
 static int
@@ -2919,12 +2932,8 @@ static int omap_udc_probe(struct platform_device *pdev)
 	}
 
 	create_proc_file();
-	status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
-			omap_udc_release);
-	if (!status)
-		return 0;
-
-	remove_proc_file();
+	return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+					  omap_udc_release);
 
 cleanup1:
 	kfree(udc);
@@ -2951,36 +2960,15 @@ static int omap_udc_remove(struct platform_device *pdev)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 
-	if (!udc)
-		return -ENODEV;
-
-	usb_del_gadget_udc(&udc->gadget);
-	if (udc->driver)
-		return -EBUSY;
-
 	udc->done = &done;
 
-	pullup_disable(udc);
-	if (!IS_ERR_OR_NULL(udc->transceiver)) {
-		usb_put_phy(udc->transceiver);
-		udc->transceiver = NULL;
-	}
-	omap_writew(0, UDC_SYSCON1);
-
-	remove_proc_file();
+	usb_del_gadget_udc(&udc->gadget);
 
-	if (udc->dc_clk) {
-		if (udc->clk_requested)
-			omap_udc_enable_clock(0);
-		clk_put(udc->hhc_clk);
-		clk_put(udc->dc_clk);
-	}
+	wait_for_completion(&done);
 
 	release_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1);
 
-	wait_for_completion(&done);
-
 	return 0;
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 36/69] USB: omap_udc: fix omap_udc_start() on 15xx machines

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 6ca6695f576b8453fe68865e84d25946d63b10ad ]

On OMAP 15xx machines there are no transceivers, and omap_udc_start()
always fails as it forgot to adjust the default return value.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/omap_udc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index d45dc14ef0a2..9060b3af27ff 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2045,7 +2045,7 @@ static inline int machine_without_vbus_sense(void)
 static int omap_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver)
 {
-	int		status = -ENODEV;
+	int		status;
 	struct omap_ep	*ep;
 	unsigned long	flags;
 
@@ -2083,6 +2083,7 @@ static int omap_udc_start(struct usb_gadget *g,
 			goto done;
 		}
 	} else {
+		status = 0;
 		if (can_pullup(udc))
 			pullup_enable(udc);
 		else
-- 
2.17.1

[PATCH AUTOSEL 4.14 37/69] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 2c2322fbcab8102b8cadc09d66714700a2da42c2 ]

On Palm TE nothing happens when you try to use gadget drivers and plug
the USB cable. Fix by adding the board to the vbus sense quirk list.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/omap_udc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 9060b3af27ff..c8facc8aa87e 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2037,6 +2037,7 @@ static inline int machine_without_vbus_sense(void)
 {
 	return machine_is_omap_innovator()
 		|| machine_is_omap_osk()
+		|| machine_is_omap_palmte()
 		|| machine_is_sx1()
 		/* No known omap7xx boards with vbus sense */
 		|| cpu_is_omap7xx();
-- 
2.17.1

[PATCH AUTOSEL 4.14 38/69] USB: omap_udc: fix rejection of out transfers when DMA is used

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 069caf5950dfa75d0526cd89c439ff9d9d3136d8 ]

Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align
transfer size") started aligning transfer size only if requested,
breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore
the old behaviour.

Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/omap_udc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index c8facc8aa87e..ee0b87a0773c 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2661,6 +2661,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	udc->gadget.max_speed = USB_SPEED_FULL;
 	udc->gadget.name = driver_name;
+	udc->gadget.quirk_ep_out_aligned_size = 1;
 	udc->transceiver = xceiv;
 
 	/* ep0 is special; put it right after the SETUP buffer */
-- 
2.17.1

[PATCH AUTOSEL 4.14 39/69] drm/meson: add support for 1080p25 mode

[Sasha Levin]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit 31e1ab494559fb46de304cc6c2aed1528f94b298 ]

This essential mode for PAL users is missing, so add it.

Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_venc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 9509017dbded..d5dfe7045cc6 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -714,6 +714,7 @@ struct meson_hdmi_venc_vic_mode {
 	{ 5, &meson_hdmi_encp_mode_1080i60 },
 	{ 20, &meson_hdmi_encp_mode_1080i50 },
 	{ 32, &meson_hdmi_encp_mode_1080p24 },
+	{ 33, &meson_hdmi_encp_mode_1080p50 },
 	{ 34, &meson_hdmi_encp_mode_1080p30 },
 	{ 31, &meson_hdmi_encp_mode_1080p50 },
 	{ 16, &meson_hdmi_encp_mode_1080p60 },
-- 
2.17.1

[PATCH AUTOSEL 4.14 40/69] netfilter: ipv6: Preserve link scope traffic original oif

[Sasha Levin]

From: Alin Nastac <alin.nastac@gmail.com>

[ Upstream commit 508b09046c0f21678652fb66fd1e9959d55591d2 ]

When ip6_route_me_harder is invoked, it resets outgoing interface of:
  - link-local scoped packets sent by neighbor discovery
  - multicast packets sent by MLD host
  - multicast packets send by MLD proxy daemon that sets outgoing
    interface through IPV6_PKTINFO ipi6_ifindex

Link-local and multicast packets must keep their original oif after
ip6_route_me_harder is called.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/netfilter.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 9bf260459f83..1f8b1a433b5d 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -25,7 +25,8 @@ int ip6_route_me_harder(struct net *net, struct sk_buff *skb)
 	unsigned int hh_len;
 	struct dst_entry *dst;
 	struct flowi6 fl6 = {
-		.flowi6_oif = sk ? sk->sk_bound_dev_if : 0,
+		.flowi6_oif = sk && sk->sk_bound_dev_if ? sk->sk_bound_dev_if :
+			rt6_need_strict(&iph->daddr) ? skb_dst(skb)->dev->ifindex : 0,
 		.flowi6_mark = skb->mark,
 		.flowi6_uid = sock_net_uid(net, sk),
 		.daddr = iph->daddr,
-- 
2.17.1

[PATCH AUTOSEL 4.14 41/69] IB/mlx5: Fix page fault handling for MW

[Sasha Levin]

From: Artemy Kovalyov <artemyko@mellanox.com>

[ Upstream commit 75b7b86bdb0df37e08e44b6c1f99010967f81944 ]

Memory windows are implemented with an indirect MKey, when a page fault
event comes for a MW Mkey we need to find the MR at the end of the list of
the indirect MKeys by iterating on all items from the first to the last.

The offset calculated during this process has to be zeroed after the first
iteration or the next iteration will start from a wrong address, resulting
incorrect ODP faulting behavior.

Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/odp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c
index 3d701c7a4c91..1ed94b6c0b0a 100644
--- a/drivers/infiniband/hw/mlx5/odp.c
+++ b/drivers/infiniband/hw/mlx5/odp.c
@@ -723,6 +723,7 @@ static int pagefault_single_data_segment(struct mlx5_ib_dev *dev,
 			head = frame;
 
 			bcnt -= frame->bcnt;
+			offset = 0;
 		}
 		break;
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 42/69] KVM: x86: fix empty-body warnings

[Sasha Levin]

From: Yi Wang <wang.yi59@zte.com.cn>

[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ]

We get the following warnings about empty statements when building
with 'W=1':

arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Rework the debug helper macro to get rid of these warnings.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/lapic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 13dfb55b84db..f7c34184342a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -55,7 +55,7 @@
 #define PRIo64 "o"
 
 /* #define apic_debug(fmt,arg...) printk(KERN_WARNING fmt,##arg) */
-#define apic_debug(fmt, arg...)
+#define apic_debug(fmt, arg...) do {} while (0)
 
 /* 14 is the version for Xeon and Pentium 8.4.8*/
 #define APIC_VERSION			(0x14UL | ((KVM_APIC_LVT_NUM - 1) << 16))
-- 
2.17.1

[PATCH AUTOSEL 4.14 43/69] x86/kvm/vmx: fix old-style function declaration

[Sasha Levin]

From: Yi Wang <wang.yi59@zte.com.cn>

[ Upstream commit 1e4329ee2c52692ea42cc677fb2133519718b34a ]

The inline keyword which is not at the beginning of the function
declaration may trigger the following build warnings, so let's fix it:

arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ec588cf4fe95..4353580b659a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1089,7 +1089,7 @@ static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked);
 static bool nested_vmx_is_page_fault_vmexit(struct vmcs12 *vmcs12,
 					    u16 error_code);
 static void vmx_update_msr_bitmap(struct kvm_vcpu *vcpu);
-static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
 							  u32 msr, int type);
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
@@ -5227,7 +5227,7 @@ static void free_vpid(int vpid)
 	spin_unlock(&vmx_vpid_lock);
 }
 
-static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
 							  u32 msr, int type)
 {
 	int f = sizeof(unsigned long);
@@ -5262,7 +5262,7 @@ static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bit
 	}
 }
 
-static void __always_inline vmx_enable_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_enable_intercept_for_msr(unsigned long *msr_bitmap,
 							 u32 msr, int type)
 {
 	int f = sizeof(unsigned long);
@@ -5297,7 +5297,7 @@ static void __always_inline vmx_enable_intercept_for_msr(unsigned long *msr_bitm
 	}
 }
 
-static void __always_inline vmx_set_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_set_intercept_for_msr(unsigned long *msr_bitmap,
 			     			      u32 msr, int type, bool value)
 {
 	if (value)
-- 
2.17.1

[PATCH AUTOSEL 4.14 44/69] net: thunderx: fix NULL pointer dereference in nic_remove

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit 24a6d2dd263bc910de018c78d1148b3e33b94512 ]

Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:

$rmmod nicvf
$rmmod nicpf

[  521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014
[  521.422777] Mem abort info:
[  521.425561]   ESR = 0x96000004
[  521.428624]   Exception class = DABT (current EL), IL = 32 bits
[  521.434535]   SET = 0, FnV = 0
[  521.437579]   EA = 0, S1PTW = 0
[  521.440730] Data abort info:
[  521.443603]   ISV = 0, ISS = 0x00000004
[  521.447431]   CM = 0, WnR = 0
[  521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42
[  521.457022] [0000000000000014] pgd=0000000000000000
[  521.461916] Internal error: Oops: 96000004 [#1] SMP
[  521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[  521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO)
[  521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[  521.527808] lr : pci_device_remove+0x48/0xd8
[  521.532066] sp : ffff000013433cc0
[  521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000
[  521.540672] x27: 0000000000000000 x26: 0000000000000000
[  521.545974] x25: 0000000056000000 x24: 0000000000000015
[  521.551274] x23: ffff8007ff89a110 x22: ffff000001667070
[  521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000
[  521.561877] x19: 0000000000000000 x18: 0000000000000025
[  521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000
[  521.593683] x7 : 0000000000000000 x6 : 0000000000000001
[  521.598983] x5 : 0000000000000002 x4 : 0000000000000003
[  521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184
[  521.609585] x1 : ffff000001662118 x0 : ffff000008557be0
[  521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[  521.621490] Call trace:
[  521.623928]  nic_remove+0x24/0x88 [nicpf]
[  521.627927]  pci_device_remove+0x48/0xd8
[  521.631847]  device_release_driver_internal+0x1b0/0x248
[  521.637062]  driver_detach+0x50/0xc0
[  521.640628]  bus_remove_driver+0x60/0x100
[  521.644627]  driver_unregister+0x34/0x60
[  521.648538]  pci_unregister_driver+0x24/0xd8
[  521.652798]  nic_cleanup_module+0x14/0x111c [nicpf]
[  521.657672]  __arm64_sys_delete_module+0x150/0x218
[  521.662460]  el0_svc_handler+0x94/0x110
[  521.666287]  el0_svc+0x8/0xc
[  521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)

Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/thunder/nic_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index fb770b0182d3..d89ec4724efd 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -1376,6 +1376,9 @@ static void nic_remove(struct pci_dev *pdev)
 {
 	struct nicpf *nic = pci_get_drvdata(pdev);
 
+	if (!nic)
+		return;
+
 	if (nic->flags & NIC_SRIOV_ENABLED)
 		pci_disable_sriov(pdev);
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 45/69] usb: gadget: u_ether: fix unsafe list iteration

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit c9287fa657b3328b4549c0ab39ea7f197a3d6a50 ]

list_for_each_entry_safe() is not safe for deleting entries from the
list if the spin lock, which protects it, is released and reacquired during
the list iteration. Fix this issue by replacing this construction with
a simple check if list is empty and removing the first entry in each
iteration. This is almost equivalent to a revert of the commit mentioned in
the Fixes: tag.

This patch fixes following issue:
--->8---
Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events eth_work
PC is at rx_fill+0x60/0xac
LR is at _raw_spin_lock_irqsave+0x50/0x5c
pc : [<c065fee0>]    lr : [<c0a056b8>]    psr: 80000093
sp : ee7fbee8  ip : 00000100  fp : 00000000
r10: 006000c0  r9 : c10b0ab0  r8 : ee7eb5c0
r7 : ee7eb614  r6 : ee7eb5ec  r5 : 000000dc  r4 : ee12ac00
r3 : ee12ac24  r2 : 00000200  r1 : 60000013  r0 : ee7eb5ec
Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 6d5dc04a  DAC: 00000051
Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval))
Stack: (0xee7fbee8 to 0xee7fc000)
...
[<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738)
[<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8)
[<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164)
[<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xee7fbfb0 to 0xee7fbff8)
...
---[ end trace 64480bc835eba7d6 ]---

Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/u_ether.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index bdbc3fdc7c4f..3a0e4f5d7b83 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -405,12 +405,12 @@ static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
 static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
 {
 	struct usb_request	*req;
-	struct usb_request	*tmp;
 	unsigned long		flags;
 
 	/* fill unused rxq slots with some skb */
 	spin_lock_irqsave(&dev->req_lock, flags);
-	list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+	while (!list_empty(&dev->rx_reqs)) {
+		req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
 		list_del_init(&req->list);
 		spin_unlock_irqrestore(&dev->req_lock, flags);
 
@@ -1125,7 +1125,6 @@ void gether_disconnect(struct gether *link)
 {
 	struct eth_dev		*dev = link->ioport;
 	struct usb_request	*req;
-	struct usb_request	*tmp;
 
 	WARN_ON(!dev);
 	if (!dev)
@@ -1142,7 +1141,8 @@ void gether_disconnect(struct gether *link)
 	 */
 	usb_ep_disable(link->in_ep);
 	spin_lock(&dev->req_lock);
-	list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) {
+	while (!list_empty(&dev->tx_reqs)) {
+		req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
 		list_del(&req->list);
 
 		spin_unlock(&dev->req_lock);
@@ -1154,7 +1154,8 @@ void gether_disconnect(struct gether *link)
 
 	usb_ep_disable(link->out_ep);
 	spin_lock(&dev->req_lock);
-	list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+	while (!list_empty(&dev->rx_reqs)) {
+		req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
 		list_del(&req->list);
 
 		spin_unlock(&dev->req_lock);
-- 
2.17.1

[PATCH AUTOSEL 4.14 46/69] netfilter: nf_tables: deactivate expressions in rule replecement routine

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit ca08987885a147643817d02bf260bc4756ce8cd4 ]

There is no expression deactivation call from the rule replacement path,
hence, chain counter is not decremented. A few steps to reproduce the
problem:

   %nft add table ip filter
   %nft add chain ip filter c1
   %nft add chain ip filter c1
   %nft add rule ip filter c1 jump c2
   %nft replace rule ip filter c1 handle 3 accept
   %nft flush ruleset

<jump c2> expression means immediate NFT_JUMP to chain c2.
Reference count of chain c2 is increased when the rule is added.

When rule is deleted or replaced, the reference counter of c2 should be
decreased via nft_rule_expr_deactivate() which calls
nft_immediate_deactivate().

Splat looks like:
[  214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Modules linked in: nf_tables nfnetlink
[  214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44
[  214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[  214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8
[  214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202
[  214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0
[  214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78
[  214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000
[  214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba
[  214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6
[  214.398983] FS:  0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000
[  214.398983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0
[  214.398983] Call Trace:
[  214.398983]  ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables]
[  214.398983]  ? __kasan_slab_free+0x145/0x180
[  214.398983]  ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables]
[  214.398983]  ? kfree+0xdb/0x280
[  214.398983]  nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables]
[ ... ]

Fixes: bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions")
Reported by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index ea1e57daf50e..623ec29ade26 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2400,21 +2400,14 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk,
 	}
 
 	if (nlh->nlmsg_flags & NLM_F_REPLACE) {
-		if (!nft_is_active_next(net, old_rule)) {
-			err = -ENOENT;
-			goto err2;
-		}
-		trans = nft_trans_rule_add(&ctx, NFT_MSG_DELRULE,
-					   old_rule);
+		trans = nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule);
 		if (trans == NULL) {
 			err = -ENOMEM;
 			goto err2;
 		}
-		nft_deactivate_next(net, old_rule);
-		chain->use--;
-
-		if (nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule) == NULL) {
-			err = -ENOMEM;
+		err = nft_delrule(&ctx, old_rule);
+		if (err < 0) {
+			nft_trans_destroy(trans);
 			goto err2;
 		}
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 47/69] cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active

[Sasha Levin]

From: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>

[ Upstream commit 9a24ce5b66f9c8190d63b15f4473600db4935f1f ]

[Description]

In a heavily loaded system where the system pagecache is nearing memory
limits and fscache is enabled, pages can be leaked by fscache while trying
read pages from cachefiles backend.  This can happen because two
applications can be reading same page from a single mount, two threads can
be trying to read the backing page at same time.  This results in one of
the threads finding that a page for the backing file or netfs file is
already in the radix tree.  During the error handling cachefiles does not
clean up the reference on backing page, leading to page leak.

[Fix]
The fix is straightforward, to decrement the reference when error is
encountered.

  [dhowells: Note that I've removed the clearance and put of newpage as
   they aren't attested in the commit message and don't appear to actually
   achieve anything since a new page is only allocated is newpage!=NULL and
   any residual new page is cleared before returning.]

[Testing]
I have tested the fix using following method for 12+ hrs.

1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs
2) create 10000 files of 2.8MB in a NFS mount.
3) start a thread to simulate heavy VM presssure
   (while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)&
4) start multiple parallel reader for data set at same time
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   ..
   ..
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
5) finally check using cat /proc/fs/fscache/stats | grep -i pages ;
   free -h , cat /proc/meminfo and page-types -r -b lru
   to ensure all pages are freed.

Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
[dja: forward ported to current upstream]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cachefiles/rdwr.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 199eb396a1bb..54379cf7db7f 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -537,7 +537,10 @@ static int cachefiles_read_backing_file(struct cachefiles_object *object,
 					    netpage->index, cachefiles_gfp);
 		if (ret < 0) {
 			if (ret == -EEXIST) {
+				put_page(backpage);
+				backpage = NULL;
 				put_page(netpage);
+				netpage = NULL;
 				fscache_retrieval_complete(op, 1);
 				continue;
 			}
@@ -610,7 +613,10 @@ static int cachefiles_read_backing_file(struct cachefiles_object *object,
 					    netpage->index, cachefiles_gfp);
 		if (ret < 0) {
 			if (ret == -EEXIST) {
+				put_page(backpage);
+				backpage = NULL;
 				put_page(netpage);
+				netpage = NULL;
 				fscache_retrieval_complete(op, 1);
 				continue;
 			}
-- 
2.17.1

[PATCH AUTOSEL 4.14 48/69] igb: fix uninitialized variables

[Sasha Levin]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit e4c39f7926b4de355f7df75651d75003806aae09 ]

This patch fixes the variable 'phy_word' may be used uninitialized.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/e1000_i210.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 07d48f2e3369..6766081f5ab9 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -862,6 +862,7 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
 		nvm_word = E1000_INVM_DEFAULT_AL;
 	tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
 	igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE);
+	phy_word = E1000_PHY_PLL_UNCONF;
 	for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
 		/* check current state directly from internal PHY */
 		igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);
-- 
2.17.1

[PATCH AUTOSEL 4.14 49/69] ixgbe: recognize 1000BaseLX SFP modules as 1Gbps

[Sasha Levin]

From: Josh Elsasser <jelsasser@appneta.com>

[ Upstream commit a8bf879af7b1999eba36303ce9cc60e0e7dd816c ]

Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.

This is done by the out-of-tree driver but the fix wasn't in mainline.

Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index cf6a245db6d5..a37c951b0753 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -2257,7 +2257,9 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
 		*autoneg = false;
 
 		if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
-		    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+		    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
+		    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+		    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
 			*speed = IXGBE_LINK_SPEED_1GB_FULL;
 			return 0;
 		}
-- 
2.17.1

[PATCH AUTOSEL 4.14 50/69] rapidio/rionet: do not free skb before reading its length

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit cfc435198f53a6fa1f656d98466b24967ff457d0 ]

skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.

Fixes: e6161d64263 ("rapidio/rionet: rework driver initialization and removal")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/rionet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index e9f101c9bae2..bfbb39f93554 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -216,9 +216,9 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 			 * it just report sending a packet to the target
 			 * (without actual packet transfer).
 			 */
-			dev_kfree_skb_any(skb);
 			ndev->stats.tx_packets++;
 			ndev->stats.tx_bytes += skb->len;
+			dev_kfree_skb_any(skb);
 		}
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 51/69] net: hisilicon: remove unexpected free_netdev

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit c758940158bf29fe14e9d0f89d5848f227b48134 ]

The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hip04_eth.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index 0cec06bec63e..c27054b8ce81 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -914,10 +914,8 @@ static int hip04_mac_probe(struct platform_device *pdev)
 	}
 
 	ret = register_netdev(ndev);
-	if (ret) {
-		free_netdev(ndev);
+	if (ret)
 		goto alloc_fail;
-	}
 
 	return 0;
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 52/69] s390/qeth: fix length check in SNMP processing

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 9a764c1e59684c0358e16ccaafd870629f2cfe67 ]

The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.

Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 169dd7127f9e..69ef5f4060ed 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4545,8 +4545,8 @@ static int qeth_snmp_command_cb(struct qeth_card *card,
 {
 	struct qeth_ipa_cmd *cmd;
 	struct qeth_arp_query_info *qinfo;
-	struct qeth_snmp_cmd *snmp;
 	unsigned char *data;
+	void *snmp_data;
 	__u16 data_len;
 
 	QETH_CARD_TEXT(card, 3, "snpcmdcb");
@@ -4554,7 +4554,6 @@ static int qeth_snmp_command_cb(struct qeth_card *card,
 	cmd = (struct qeth_ipa_cmd *) sdata;
 	data = (unsigned char *)((char *)cmd - reply->offset);
 	qinfo = (struct qeth_arp_query_info *) reply->param;
-	snmp = &cmd->data.setadapterparms.data.snmp;
 
 	if (cmd->hdr.return_code) {
 		QETH_CARD_TEXT_(card, 4, "scer1%x", cmd->hdr.return_code);
@@ -4567,10 +4566,15 @@ static int qeth_snmp_command_cb(struct qeth_card *card,
 		return 0;
 	}
 	data_len = *((__u16 *)QETH_IPA_PDU_LEN_PDU1(data));
-	if (cmd->data.setadapterparms.hdr.seq_no == 1)
-		data_len -= (__u16)((char *)&snmp->data - (char *)cmd);
-	else
-		data_len -= (__u16)((char *)&snmp->request - (char *)cmd);
+	if (cmd->data.setadapterparms.hdr.seq_no == 1) {
+		snmp_data = &cmd->data.setadapterparms.data.snmp;
+		data_len -= offsetof(struct qeth_ipa_cmd,
+				     data.setadapterparms.data.snmp);
+	} else {
+		snmp_data = &cmd->data.setadapterparms.data.snmp.request;
+		data_len -= offsetof(struct qeth_ipa_cmd,
+				     data.setadapterparms.data.snmp.request);
+	}
 
 	/* check if there is enough room in userspace */
 	if ((qinfo->udata_len - qinfo->udata_offset) < data_len) {
@@ -4583,16 +4587,9 @@ static int qeth_snmp_command_cb(struct qeth_card *card,
 	QETH_CARD_TEXT_(card, 4, "sseqn%i",
 		cmd->data.setadapterparms.hdr.seq_no);
 	/*copy entries to user buffer*/
-	if (cmd->data.setadapterparms.hdr.seq_no == 1) {
-		memcpy(qinfo->udata + qinfo->udata_offset,
-		       (char *)snmp,
-		       data_len + offsetof(struct qeth_snmp_cmd, data));
-		qinfo->udata_offset += offsetof(struct qeth_snmp_cmd, data);
-	} else {
-		memcpy(qinfo->udata + qinfo->udata_offset,
-		       (char *)&snmp->request, data_len);
-	}
+	memcpy(qinfo->udata + qinfo->udata_offset, snmp_data, data_len);
 	qinfo->udata_offset += data_len;
+
 	/* check if all replies received ... */
 		QETH_CARD_TEXT_(card, 4, "srtot%i",
 			       cmd->data.setadapterparms.hdr.used_total);
-- 
2.17.1

[PATCH AUTOSEL 4.14 53/69] drm/amdgpu: Add delay after enable RLC ucode

[Sasha Levin]

From: shaoyunl <shaoyun.liu@amd.com>

[ Upstream commit ad97d9de45835b6a0f71983b0ae0cffd7306730a ]

Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.

This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 3981915e2311..b2eecfc9042e 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1992,12 +1992,13 @@ static void gfx_v9_0_rlc_start(struct amdgpu_device *adev)
 #endif
 
 	WREG32_FIELD15(GC, 0, RLC_CNTL, RLC_ENABLE_F32, 1);
+	udelay(50);
 
 	/* carrizo do enable cp interrupt after cp inited */
-	if (!(adev->flags & AMD_IS_APU))
+	if (!(adev->flags & AMD_IS_APU)) {
 		gfx_v9_0_enable_gui_idle_interrupt(adev, true);
-
-	udelay(50);
+		udelay(50);
+	}
 
 #ifdef AMDGPU_RLC_DEBUG_RETRY
 	/* RLC_GPM_GENERAL_6 : RLC Ucode version */
-- 
2.17.1

[PATCH AUTOSEL 4.14 54/69] drm/ast: fixed reading monitor EDID not stable issue

[Sasha Levin]

From: "Y.C. Chen" <yc_chen@aspeedtech.com>

[ Upstream commit 300625620314194d9e6d4f6dda71f2dc9cf62d9f ]

v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration

[airlied: fix two checkpatch warnings]

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ast/ast_mode.c | 36 ++++++++++++++++++++++++++++------
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index fae1176b2472..343867b182dd 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -973,9 +973,21 @@ static int get_clock(void *i2c_priv)
 {
 	struct ast_i2c_chan *i2c = i2c_priv;
 	struct ast_private *ast = i2c->dev->dev_private;
-	uint32_t val;
+	uint32_t val, val2, count, pass;
+
+	count = 0;
+	pass = 0;
+	val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+	do {
+		val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+		if (val == val2) {
+			pass++;
+		} else {
+			pass = 0;
+			val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+		}
+	} while ((pass < 5) && (count++ < 0x10000));
 
-	val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4;
 	return val & 1 ? 1 : 0;
 }
 
@@ -983,9 +995,21 @@ static int get_data(void *i2c_priv)
 {
 	struct ast_i2c_chan *i2c = i2c_priv;
 	struct ast_private *ast = i2c->dev->dev_private;
-	uint32_t val;
+	uint32_t val, val2, count, pass;
+
+	count = 0;
+	pass = 0;
+	val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+	do {
+		val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+		if (val == val2) {
+			pass++;
+		} else {
+			pass = 0;
+			val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+		}
+	} while ((pass < 5) && (count++ < 0x10000));
 
-	val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5;
 	return val & 1 ? 1 : 0;
 }
 
@@ -998,7 +1022,7 @@ static void set_clock(void *i2c_priv, int clock)
 
 	for (i = 0; i < 0x10000; i++) {
 		ujcrb7 = ((clock & 0x01) ? 0 : 1);
-		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfe, ujcrb7);
+		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf4, ujcrb7);
 		jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x01);
 		if (ujcrb7 == jtemp)
 			break;
@@ -1014,7 +1038,7 @@ static void set_data(void *i2c_priv, int data)
 
 	for (i = 0; i < 0x10000; i++) {
 		ujcrb7 = ((data & 0x01) ? 0 : 1) << 2;
-		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfb, ujcrb7);
+		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf1, ujcrb7);
 		jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x04);
 		if (ujcrb7 == jtemp)
 			break;
-- 
2.17.1

[PATCH AUTOSEL 4.14 55/69] xen: xlate_mmu: add missing header to fix 'W=1' warning

[Sasha Levin]

From: Srikanth Boddepalli <boddepalli.srikanth@gmail.com>

[ Upstream commit 72791ac854fea36034fa7976b748fde585008e78 ]

Add a missing header otherwise compiler warns about missed prototype:

drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes]
  int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma,
      ^~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Srikanth Boddepalli <boddepalli.srikanth@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xlate_mmu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/xen/xlate_mmu.c b/drivers/xen/xlate_mmu.c
index 23f1387b3ef7..e7df65d32c91 100644
--- a/drivers/xen/xlate_mmu.c
+++ b/drivers/xen/xlate_mmu.c
@@ -36,6 +36,7 @@
 #include <asm/xen/hypervisor.h>
 
 #include <xen/xen.h>
+#include <xen/xen-ops.h>
 #include <xen/page.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/memory.h>
-- 
2.17.1

[PATCH AUTOSEL 4.14 56/69] Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"

[Sasha Levin]

From: Igor Druzhinin <igor.druzhinin@citrix.com>

[ Upstream commit 123664101aa2156d05251704fc63f9bcbf77741a ]

This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.

That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.

The original issue that commit has tried to workaround fa564ad96366
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/enlighten.c | 78 ----------------------------------------
 arch/x86/xen/setup.c     |  6 ++--
 drivers/xen/balloon.c    | 65 +++++----------------------------
 include/xen/balloon.h    |  5 ---
 4 files changed, 13 insertions(+), 141 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index df208af3cd74..515d5e4414c2 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -7,7 +7,6 @@
 
 #include <xen/features.h>
 #include <xen/page.h>
-#include <xen/interface/memory.h>
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -336,80 +335,3 @@ void xen_arch_unregister_cpu(int num)
 }
 EXPORT_SYMBOL(xen_arch_unregister_cpu);
 #endif
-
-#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
-void __init arch_xen_balloon_init(struct resource *hostmem_resource)
-{
-	struct xen_memory_map memmap;
-	int rc;
-	unsigned int i, last_guest_ram;
-	phys_addr_t max_addr = PFN_PHYS(max_pfn);
-	struct e820_table *xen_e820_table;
-	const struct e820_entry *entry;
-	struct resource *res;
-
-	if (!xen_initial_domain())
-		return;
-
-	xen_e820_table = kmalloc(sizeof(*xen_e820_table), GFP_KERNEL);
-	if (!xen_e820_table)
-		return;
-
-	memmap.nr_entries = ARRAY_SIZE(xen_e820_table->entries);
-	set_xen_guest_handle(memmap.buffer, xen_e820_table->entries);
-	rc = HYPERVISOR_memory_op(XENMEM_machine_memory_map, &memmap);
-	if (rc) {
-		pr_warn("%s: Can't read host e820 (%d)\n", __func__, rc);
-		goto out;
-	}
-
-	last_guest_ram = 0;
-	for (i = 0; i < memmap.nr_entries; i++) {
-		if (xen_e820_table->entries[i].addr >= max_addr)
-			break;
-		if (xen_e820_table->entries[i].type == E820_TYPE_RAM)
-			last_guest_ram = i;
-	}
-
-	entry = &xen_e820_table->entries[last_guest_ram];
-	if (max_addr >= entry->addr + entry->size)
-		goto out; /* No unallocated host RAM. */
-
-	hostmem_resource->start = max_addr;
-	hostmem_resource->end = entry->addr + entry->size;
-
-	/*
-	 * Mark non-RAM regions between the end of dom0 RAM and end of host RAM
-	 * as unavailable. The rest of that region can be used for hotplug-based
-	 * ballooning.
-	 */
-	for (; i < memmap.nr_entries; i++) {
-		entry = &xen_e820_table->entries[i];
-
-		if (entry->type == E820_TYPE_RAM)
-			continue;
-
-		if (entry->addr >= hostmem_resource->end)
-			break;
-
-		res = kzalloc(sizeof(*res), GFP_KERNEL);
-		if (!res)
-			goto out;
-
-		res->name = "Unavailable host RAM";
-		res->start = entry->addr;
-		res->end = (entry->addr + entry->size < hostmem_resource->end) ?
-			    entry->addr + entry->size : hostmem_resource->end;
-		rc = insert_resource(hostmem_resource, res);
-		if (rc) {
-			pr_warn("%s: Can't insert [%llx - %llx) (%d)\n",
-				__func__, res->start, res->end, rc);
-			kfree(res);
-			goto  out;
-		}
-	}
-
- out:
-	kfree(xen_e820_table);
-}
-#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 6e0d2086eacb..c114ca767b3b 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -808,6 +808,7 @@ char * __init xen_memory_setup(void)
 	addr = xen_e820_table.entries[0].addr;
 	size = xen_e820_table.entries[0].size;
 	while (i < xen_e820_table.nr_entries) {
+		bool discard = false;
 
 		chunk_size = size;
 		type = xen_e820_table.entries[i].type;
@@ -823,10 +824,11 @@ char * __init xen_memory_setup(void)
 				xen_add_extra_mem(pfn_s, n_pfns);
 				xen_max_p2m_pfn = pfn_s + n_pfns;
 			} else
-				type = E820_TYPE_UNUSABLE;
+				discard = true;
 		}
 
-		xen_align_and_add_e820_region(addr, chunk_size, type);
+		if (!discard)
+			xen_align_and_add_e820_region(addr, chunk_size, type);
 
 		addr += chunk_size;
 		size -= chunk_size;
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 065f0b607373..f77e499afddd 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -257,25 +257,10 @@ static void release_memory_resource(struct resource *resource)
 	kfree(resource);
 }
 
-/*
- * Host memory not allocated to dom0. We can use this range for hotplug-based
- * ballooning.
- *
- * It's a type-less resource. Setting IORESOURCE_MEM will make resource
- * management algorithms (arch_remove_reservations()) look into guest e820,
- * which we don't want.
- */
-static struct resource hostmem_resource = {
-	.name   = "Host RAM",
-};
-
-void __attribute__((weak)) __init arch_xen_balloon_init(struct resource *res)
-{}
-
 static struct resource *additional_memory_resource(phys_addr_t size)
 {
-	struct resource *res, *res_hostmem;
-	int ret = -ENOMEM;
+	struct resource *res;
+	int ret;
 
 	res = kzalloc(sizeof(*res), GFP_KERNEL);
 	if (!res)
@@ -284,42 +269,13 @@ static struct resource *additional_memory_resource(phys_addr_t size)
 	res->name = "System RAM";
 	res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
-	res_hostmem = kzalloc(sizeof(*res), GFP_KERNEL);
-	if (res_hostmem) {
-		/* Try to grab a range from hostmem */
-		res_hostmem->name = "Host memory";
-		ret = allocate_resource(&hostmem_resource, res_hostmem,
-					size, 0, -1,
-					PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL);
-	}
-
-	if (!ret) {
-		/*
-		 * Insert this resource into iomem. Because hostmem_resource
-		 * tracks portion of guest e820 marked as UNUSABLE noone else
-		 * should try to use it.
-		 */
-		res->start = res_hostmem->start;
-		res->end = res_hostmem->end;
-		ret = insert_resource(&iomem_resource, res);
-		if (ret < 0) {
-			pr_err("Can't insert iomem_resource [%llx - %llx]\n",
-				res->start, res->end);
-			release_memory_resource(res_hostmem);
-			res_hostmem = NULL;
-			res->start = res->end = 0;
-		}
-	}
-
-	if (ret) {
-		ret = allocate_resource(&iomem_resource, res,
-					size, 0, -1,
-					PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL);
-		if (ret < 0) {
-			pr_err("Cannot allocate new System RAM resource\n");
-			kfree(res);
-			return NULL;
-		}
+	ret = allocate_resource(&iomem_resource, res,
+				size, 0, -1,
+				PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL);
+	if (ret < 0) {
+		pr_err("Cannot allocate new System RAM resource\n");
+		kfree(res);
+		return NULL;
 	}
 
 #ifdef CONFIG_SPARSEMEM
@@ -331,7 +287,6 @@ static struct resource *additional_memory_resource(phys_addr_t size)
 			pr_err("New System RAM resource outside addressable RAM (%lu > %lu)\n",
 			       pfn, limit);
 			release_memory_resource(res);
-			release_memory_resource(res_hostmem);
 			return NULL;
 		}
 	}
@@ -810,8 +765,6 @@ static int __init balloon_init(void)
 	set_online_page_callback(&xen_online_page);
 	register_memory_notifier(&xen_memory_nb);
 	register_sysctl_table(xen_root);
-
-	arch_xen_balloon_init(&hostmem_resource);
 #endif
 
 #ifdef CONFIG_XEN_PV
diff --git a/include/xen/balloon.h b/include/xen/balloon.h
index 61f410fd74e4..4914b93a23f2 100644
--- a/include/xen/balloon.h
+++ b/include/xen/balloon.h
@@ -44,8 +44,3 @@ static inline void xen_balloon_init(void)
 {
 }
 #endif
-
-#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
-struct resource;
-void arch_xen_balloon_init(struct resource *hostmem_resource);
-#endif
-- 
2.17.1

[PATCH AUTOSEL 4.14 57/69] pstore/ram: Correctly calculate usable PRZ bytes

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ]

The actual number of bytes stored in a PRZ is smaller than the
bytes requested by platform data, since there is a header on each
PRZ. Additionally, if ECC is enabled, there are trailing bytes used
as well. Normally this mismatch doesn't matter since PRZs are circular
buffers and the leading "overflow" bytes are just thrown away. However, in
the case of a compressed record, this rather badly corrupts the results.

This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1".
Any stored crashes would not be uncompressable (producing a pstorefs
"dmesg-*.enc.z" file), and triggering errors at boot:

  [    2.790759] pstore: crypto_comp_decompress failed, ret = -22!

Backporting this depends on commit 70ad35db3321 ("pstore: Convert console
write to use ->write_buf")

Reported-by: Joel Fernandes <joel@joelfernandes.org>
Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/pstore/ram.c        | 15 ++++++---------
 include/linux/pstore.h |  5 ++++-
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 7125b398d312..9f7e546d7050 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -804,17 +804,14 @@ static int ramoops_probe(struct platform_device *pdev)
 
 	cxt->pstore.data = cxt;
 	/*
-	 * Console can handle any buffer size, so prefer LOG_LINE_MAX. If we
-	 * have to handle dumps, we must have at least record_size buffer. And
-	 * for ftrace, bufsize is irrelevant (if bufsize is 0, buf will be
-	 * ZERO_SIZE_PTR).
+	 * Since bufsize is only used for dmesg crash dumps, it
+	 * must match the size of the dprz record (after PRZ header
+	 * and ECC bytes have been accounted for).
 	 */
-	if (cxt->console_size)
-		cxt->pstore.bufsize = 1024; /* LOG_LINE_MAX */
-	cxt->pstore.bufsize = max(cxt->record_size, cxt->pstore.bufsize);
-	cxt->pstore.buf = kmalloc(cxt->pstore.bufsize, GFP_KERNEL);
+	cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;
+	cxt->pstore.buf = kzalloc(cxt->pstore.bufsize, GFP_KERNEL);
 	if (!cxt->pstore.buf) {
-		pr_err("cannot allocate pstore buffer\n");
+		pr_err("cannot allocate pstore crash dump buffer\n");
 		err = -ENOMEM;
 		goto fail_clear;
 	}
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index 61f806a7fe29..170bb981d2fd 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -90,7 +90,10 @@ struct pstore_record {
  *
  * @buf_lock:	spinlock to serialize access to @buf
  * @buf:	preallocated crash dump buffer
- * @bufsize:	size of @buf available for crash dump writes
+ * @bufsize:	size of @buf available for crash dump bytes (must match
+ *		smallest number of bytes available for writing to a
+ *		backend entry, since compressed bytes don't take kindly
+ *		to being truncated)
  *
  * @read_mutex:	serializes @open, @read, @close, and @erase callbacks
  * @flags:	bitfield of frontends the backend can accept writes for
-- 
2.17.1

[PATCH AUTOSEL 4.14 58/69] fscache: fix race between enablement and dropping of object

[Sasha Levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit c5a94f434c82529afda290df3235e4d85873c5b4 ]

It was observed that a process blocked indefintely in
__fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP
to be cleared via fscache_wait_for_deferred_lookup().

At this time, ->backing_objects was empty, which would normaly prevent
__fscache_read_or_alloc_page() from getting to the point of waiting.
This implies that ->backing_objects was cleared *after*
__fscache_read_or_alloc_page was was entered.

When an object is "killed" and then "dropped",
FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then
KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is
->backing_objects cleared.  This leaves a window where
something else can set FSCACHE_COOKIE_LOOKING_UP and
__fscache_read_or_alloc_page() can start waiting, before
->backing_objects is cleared

There is some uncertainty in this analysis, but it seems to be fit the
observations.  Adding the wake in this patch will be handled correctly
by __fscache_read_or_alloc_page(), as it checks if ->backing_objects
is empty again, after waiting.

Customer which reported the hang, also report that the hang cannot be
reproduced with this fix.

The backtrace for the blocked process looked like:

PID: 29360  TASK: ffff881ff2ac0f80  CPU: 3   COMMAND: "zsh"
 #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1
 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed
 #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8
 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e
 #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache]
 #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache]
 #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs]
 #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs]
 #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73
 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs]
#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756
#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa
#12 [ffff881ff43eff18] sys_read at ffffffff811fda62
#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fscache/object.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/fscache/object.c b/fs/fscache/object.c
index 7a182c87f378..ab1d7f35f6c2 100644
--- a/fs/fscache/object.c
+++ b/fs/fscache/object.c
@@ -715,6 +715,9 @@ static const struct fscache_state *fscache_drop_object(struct fscache_object *ob
 
 	if (awaken)
 		wake_up_bit(&cookie->flags, FSCACHE_COOKIE_INVALIDATING);
+	if (test_and_clear_bit(FSCACHE_COOKIE_LOOKING_UP, &cookie->flags))
+		wake_up_bit(&cookie->flags, FSCACHE_COOKIE_LOOKING_UP);
+
 
 	/* Prevent a race with our last child, which has to signal EV_CLEARED
 	 * before dropping our spinlock.
-- 
2.17.1

[PATCH AUTOSEL 4.14 59/69] fscache, cachefiles: remove redundant variable 'cache'

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 31ffa563833576bd49a8bf53120568312755e6e2 ]

Variable 'cache' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'cache' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cachefiles/rdwr.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 54379cf7db7f..5e9176ec0d3a 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -969,11 +969,8 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page)
 void cachefiles_uncache_page(struct fscache_object *_object, struct page *page)
 {
 	struct cachefiles_object *object;
-	struct cachefiles_cache *cache;
 
 	object = container_of(_object, struct cachefiles_object, fscache);
-	cache = container_of(object->fscache.cache,
-			     struct cachefiles_cache, cache);
 
 	_enter("%p,{%lu}", object, page->index);
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 60/69] nvme: flush namespace scanning work just before removing namespaces

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit f6c8e432cb0479255322c5d0335b9f1699a0270c ]

nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.

Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.

Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 3a63d58d2ca9..65f3f1a34b6b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2572,6 +2572,9 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl)
 {
 	struct nvme_ns *ns, *next;
 
+	/* prevent racing with ns scanning */
+	flush_work(&ctrl->scan_work);
+
 	/*
 	 * The dead states indicates the controller was not gracefully
 	 * disconnected. In that case, we won't be able to flush any data while
@@ -2743,7 +2746,6 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)
 {
 	nvme_stop_keep_alive(ctrl);
 	flush_work(&ctrl->async_event_work);
-	flush_work(&ctrl->scan_work);
 	cancel_work_sync(&ctrl->fw_act_work);
 }
 EXPORT_SYMBOL_GPL(nvme_stop_ctrl);
-- 
2.17.1

[PATCH AUTOSEL 4.14 61/69] ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value

[Sasha Levin]

From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

[ Upstream commit ea2412dc21cc790335d319181dddc43682aef164 ]

Running the Clang static analyzer on IORT code detected the following
error:

Logic error: Branch condition evaluates to a garbage value

in

iort_get_platform_device_domain()

If the named component associated with a given device has no IORT
mappings, iort_get_platform_device_domain() exits its MSI mapping loop
with msi_parent pointer containing garbage, which can lead to erroneous
code path execution.

Initialize the msi_parent pointer, fixing the bug.

Fixes: d4f54a186667 ("ACPI: platform: setup MSI domain for ACPI based
platform device")
Reported-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/arm64/iort.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index de56394dd161..ca414910710e 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -547,7 +547,7 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
  */
 static struct irq_domain *iort_get_platform_device_domain(struct device *dev)
 {
-	struct acpi_iort_node *node, *msi_parent;
+	struct acpi_iort_node *node, *msi_parent = NULL;
 	struct fwnode_handle *iort_fwnode;
 	struct acpi_iort_its_group *its;
 	int i;
-- 
2.17.1

[PATCH AUTOSEL 4.14 62/69] test_hexdump: use memcpy instead of strncpy

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit b1286ed7158e9b62787508066283ab0b8850b518 ]

New versions of gcc reasonably warn about the odd pattern of

	strncpy(p, q, strlen(q));

which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.

Apparently there was a patch for this floating around earlier, but it
got lost.

Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_hexdump.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/test_hexdump.c b/lib/test_hexdump.c
index 3f415d8101f3..1c3c513add77 100644
--- a/lib/test_hexdump.c
+++ b/lib/test_hexdump.c
@@ -81,7 +81,7 @@ static void __init test_hexdump_prepare_test(size_t len, int rowsize,
 		const char *q = *result++;
 		size_t amount = strlen(q);
 
-		strncpy(p, q, amount);
+		memcpy(p, q, amount);
 		p += amount;
 
 		*p++ = ' ';
-- 
2.17.1

[PATCH AUTOSEL 4.14 63/69] unifdef: use memcpy instead of strncpy

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 38c7b224ce22c25fed04007839edf974bd13439d ]

New versions of gcc reasonably warn about the odd pattern of

	strncpy(p, q, strlen(q));

which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.

There was a comment about _why_ the code used strncpy - to avoid the
terminating NUL byte, but memcpy does the same and avoids the warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/unifdef.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/unifdef.c b/scripts/unifdef.c
index 7493c0ee51cc..db00e3e30a59 100644
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -395,7 +395,7 @@ usage(void)
  * When we have processed a group that starts off with a known-false
  * #if/#elif sequence (which has therefore been deleted) followed by a
  * #elif that we don't understand and therefore must keep, we edit the
- * latter into a #if to keep the nesting correct. We use strncpy() to
+ * latter into a #if to keep the nesting correct. We use memcpy() to
  * overwrite the 4 byte token "elif" with "if  " without a '\0' byte.
  *
  * When we find a true #elif in a group, the following block will
@@ -450,7 +450,7 @@ static void Idrop (void) { Fdrop();  ignoreon(); }
 static void Itrue (void) { Ftrue();  ignoreon(); }
 static void Ifalse(void) { Ffalse(); ignoreon(); }
 /* modify this line */
-static void Mpass (void) { strncpy(keyword, "if  ", 4); Pelif(); }
+static void Mpass (void) { memcpy(keyword, "if  ", 4); Pelif(); }
 static void Mtrue (void) { keywordedit("else");  state(IS_TRUE_MIDDLE); }
 static void Melif (void) { keywordedit("endif"); state(IS_FALSE_TRAILER); }
 static void Melse (void) { keywordedit("endif"); state(IS_FALSE_ELSE); }
-- 
2.17.1

[PATCH AUTOSEL 4.14 64/69] ocfs2: fix deadlock caused by ocfs2_defrag_extent()

[Sasha Levin]

From: Larry Chen <lchen@suse.com>

[ Upstream commit e21e57445a64598b29a6f629688f9b9a39e7242a ]

ocfs2_defrag_extent may fall into deadlock.

ocfs2_ioctl_move_extents
    ocfs2_ioctl_move_extents
      ocfs2_move_extents
        ocfs2_defrag_extent
          ocfs2_lock_allocators_move_extents

            ocfs2_reserve_clusters
              inode_lock GLOBAL_BITMAP_SYSTEM_INODE

	  __ocfs2_flush_truncate_log
              inode_lock GLOBAL_BITMAP_SYSTEM_INODE

As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock
against the global bitmap if local allocator has not sufficient cluters.
Once global bitmap could meet the demand, ocfs2_reserve_cluster will
return success with global bitmap locked.

After ocfs2_reserve_cluster(), if truncate log is full,
__ocfs2_flush_truncate_log() will definitely fall into deadlock because
it needs to inode_lock global bitmap, which has already been locked.

To fix this bug, we could remove from
ocfs2_lock_allocators_move_extents() the code which intends to lock
global allocator, and put the removed code after
__ocfs2_flush_truncate_log().

ocfs2_lock_allocators_move_extents() is referred by 2 places, one is
here, the other does not need the data allocator context, which means
this patch does not affect the caller so far.

Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/move_extents.c | 47 +++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 21 deletions(-)

diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c
index 7eb3b0a6347e..f55f82ca3425 100644
--- a/fs/ocfs2/move_extents.c
+++ b/fs/ocfs2/move_extents.c
@@ -156,18 +156,14 @@ static int __ocfs2_move_extent(handle_t *handle,
 }
 
 /*
- * lock allocators, and reserving appropriate number of bits for
- * meta blocks and data clusters.
- *
- * in some cases, we don't need to reserve clusters, just let data_ac
- * be NULL.
+ * lock allocator, and reserve appropriate number of bits for
+ * meta blocks.
  */
-static int ocfs2_lock_allocators_move_extents(struct inode *inode,
+static int ocfs2_lock_meta_allocator_move_extents(struct inode *inode,
 					struct ocfs2_extent_tree *et,
 					u32 clusters_to_move,
 					u32 extents_to_split,
 					struct ocfs2_alloc_context **meta_ac,
-					struct ocfs2_alloc_context **data_ac,
 					int extra_blocks,
 					int *credits)
 {
@@ -192,13 +188,6 @@ static int ocfs2_lock_allocators_move_extents(struct inode *inode,
 		goto out;
 	}
 
-	if (data_ac) {
-		ret = ocfs2_reserve_clusters(osb, clusters_to_move, data_ac);
-		if (ret) {
-			mlog_errno(ret);
-			goto out;
-		}
-	}
 
 	*credits += ocfs2_calc_extend_credits(osb->sb, et->et_root_el);
 
@@ -257,10 +246,10 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
 		}
 	}
 
-	ret = ocfs2_lock_allocators_move_extents(inode, &context->et, *len, 1,
-						 &context->meta_ac,
-						 &context->data_ac,
-						 extra_blocks, &credits);
+	ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et,
+						*len, 1,
+						&context->meta_ac,
+						extra_blocks, &credits);
 	if (ret) {
 		mlog_errno(ret);
 		goto out;
@@ -283,6 +272,21 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
 		}
 	}
 
+	/*
+	 * Make sure ocfs2_reserve_cluster is called after
+	 * __ocfs2_flush_truncate_log, otherwise, dead lock may happen.
+	 *
+	 * If ocfs2_reserve_cluster is called
+	 * before __ocfs2_flush_truncate_log, dead lock on global bitmap
+	 * may happen.
+	 *
+	 */
+	ret = ocfs2_reserve_clusters(osb, *len, &context->data_ac);
+	if (ret) {
+		mlog_errno(ret);
+		goto out_unlock_mutex;
+	}
+
 	handle = ocfs2_start_trans(osb, credits);
 	if (IS_ERR(handle)) {
 		ret = PTR_ERR(handle);
@@ -600,9 +604,10 @@ static int ocfs2_move_extent(struct ocfs2_move_extents_context *context,
 		}
 	}
 
-	ret = ocfs2_lock_allocators_move_extents(inode, &context->et, len, 1,
-						 &context->meta_ac,
-						 NULL, extra_blocks, &credits);
+	ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et,
+						len, 1,
+						&context->meta_ac,
+						extra_blocks, &credits);
 	if (ret) {
 		mlog_errno(ret);
 		goto out;
-- 
2.17.1

[PATCH AUTOSEL 4.14 65/69] mm/page_alloc.c: fix calculation of pgdat->nr_zones

[Sasha Levin]

From: Wei Yang <richard.weiyang@gmail.com>

[ Upstream commit 8f416836c0d50b198cad1225132e5abebf8980dc ]

init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally.  This is correct in the normal
case, while not exact in hot-plug situation.

This function is used in two places:

  * free_area_init_core()
  * move_pfn_range_to_zone()

In the first case, we are sure zone index increase monotonically.  While
in the second one, this is under users control.

One way to reproduce this is:
----------------------------

1. create a virtual machine with empty node1

   -m 4G,slots=32,maxmem=32G \
   -smp 4,maxcpus=8          \
   -numa node,nodeid=0,mem=4G,cpus=0-3 \
   -numa node,nodeid=1,mem=0G,cpus=4-7

2. hot-add cpu 3-7

   cpu-add [3-7]

2. hot-add memory to nod1

   object_add memory-backend-ram,id=ram0,size=1G
   device_add pc-dimm,id=dimm0,memdev=ram0,node=1

3. online memory with following order

   echo online_movable > memory47/state
   echo online > memory40/state

After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).

Michal said:
 "Having an incorrect nr_zones might result in all sorts of problems
  which would be quite hard to debug (e.g. reclaim not considering the
  movable zone). I do not expect many users would suffer from this it
  but still this is trivial and obviously right thing to do so
  backporting to the stable tree shouldn't be harmful (last famous
  words)"

Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page_alloc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2074f424dabf..86a5cab8b5dc 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5554,8 +5554,10 @@ void __meminit init_currently_empty_zone(struct zone *zone,
 					unsigned long size)
 {
 	struct pglist_data *pgdat = zone->zone_pgdat;
+	int zone_idx = zone_idx(zone) + 1;
 
-	pgdat->nr_zones = zone_idx(zone) + 1;
+	if (zone_idx > pgdat->nr_zones)
+		pgdat->nr_zones = zone_idx;
 
 	zone->zone_start_pfn = zone_start_pfn;
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 66/69] hfs: do not free node before using

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit ce96a407adef126870b3f4a1b73529dd8aa80f49 ]

hfs_bmap_free() frees the node via hfs_bnode_put(node).  However, it
then reads node->this when dumping error message on an error path, which
may result in a use-after-free bug.  This patch frees the node only when
it is never again used.

Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com
Fixes: a1185ffa2fc ("HFS rewrite")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfs/btree.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 374b5688e29e..9bdff5e40626 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -329,13 +329,14 @@ void hfs_bmap_free(struct hfs_bnode *node)
 
 		nidx -= len * 8;
 		i = node->next;
-		hfs_bnode_put(node);
 		if (!i) {
 			/* panic */;
 			pr_crit("unable to free bnode %u. bmap not found!\n",
 				node->this);
+			hfs_bnode_put(node);
 			return;
 		}
+		hfs_bnode_put(node);
 		node = hfs_bnode_find(tree, i);
 		if (IS_ERR(node))
 			return;
-- 
2.17.1

[PATCH AUTOSEL 4.14 67/69] hfsplus: do not free node before using

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit c7d7d620dcbd2a1c595092280ca943f2fced7bbd ]

hfs_bmap_free() frees node via hfs_bnode_put(node).  However it then
reads node->this when dumping error message on an error path, which may
result in a use-after-free bug.  This patch frees node only when it is
never used.

Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfsplus/btree.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index de14b2b6881b..3de3bc4918b5 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -454,14 +454,15 @@ void hfs_bmap_free(struct hfs_bnode *node)
 
 		nidx -= len * 8;
 		i = node->next;
-		hfs_bnode_put(node);
 		if (!i) {
 			/* panic */;
 			pr_crit("unable to free bnode %u. "
 					"bmap not found!\n",
 				node->this);
+			hfs_bnode_put(node);
 			return;
 		}
+		hfs_bnode_put(node);
 		node = hfs_bnode_find(tree, i);
 		if (IS_ERR(node))
 			return;
-- 
2.17.1

[PATCH AUTOSEL 4.14 68/69] debugobjects: avoid recursive calls with kmemleak

[Sasha Levin]

From: Qian Cai <cai@gmx.us>

[ Upstream commit 8de456cf87ba863e028c4dd01bae44255ce3d835 ]

CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.

fill_pool
  kmemleak_ignore
    make_black_object
      put_object
        __call_rcu (kernel/rcu/tree.c)
          debug_rcu_head_queue
            debug_object_activate
              debug_object_init
                fill_pool
                  kmemleak_ignore
                    make_black_object
                      ...

So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.

Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/debugobjects.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 99308479b1c8..bacb00a9cd9f 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -111,7 +111,6 @@ static void fill_pool(void)
 		if (!new)
 			return;
 
-		kmemleak_ignore(new);
 		raw_spin_lock_irqsave(&pool_lock, flags);
 		hlist_add_head(&new->node, &obj_pool);
 		debug_objects_allocated++;
@@ -1085,7 +1084,6 @@ static int __init debug_objects_replace_static_objects(void)
 		obj = kmem_cache_zalloc(obj_cache, GFP_KERNEL);
 		if (!obj)
 			goto free;
-		kmemleak_ignore(obj);
 		hlist_add_head(&obj->node, &objects);
 	}
 
@@ -1141,7 +1139,8 @@ void __init debug_objects_mem_init(void)
 
 	obj_cache = kmem_cache_create("debug_objects_cache",
 				      sizeof (struct debug_obj), 0,
-				      SLAB_DEBUG_OBJECTS, NULL);
+				      SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE,
+				      NULL);
 
 	if (!obj_cache || debug_objects_replace_static_objects()) {
 		debug_objects_enabled = 0;
-- 
2.17.1

[PATCH AUTOSEL 4.14 69/69] ocfs2: fix potential use after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 164f7e586739d07eb56af6f6d66acebb11f315c8 ]

ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed.  However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug.  Move the put operation later.

Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com
Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/export.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
index 9f88188060db..4bf8d5854b27 100644
--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -125,10 +125,10 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb,
 
 check_gen:
 	if (handle->ih_generation != inode->i_generation) {
-		iput(inode);
 		trace_ocfs2_get_dentry_generation((unsigned long long)blkno,
 						  handle->ih_generation,
 						  inode->i_generation);
+		iput(inode);
 		result = ERR_PTR(-ESTALE);
 		goto bail;
 	}
-- 
2.17.1