From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Shalom Toledo <shalomt@mellanox.com>,
Ido Schimmel <idosch@mellanox.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 67/97] mlxsw: core: Increase timeout during firmware flash process
Date: Wed, 26 Dec 2018 17:35:27 -0500 [thread overview]
Message-ID: <20181226223557.149329-67-sashal@kernel.org> (raw)
In-Reply-To: <20181226223557.149329-1-sashal@kernel.org>
From: Shalom Toledo <shalomt@mellanox.com>
[ Upstream commit cf0b70e71b32137ccf9c1f3dd9fb30cbf89b4322 ]
During the firmware flash process, some of the EMADs get timed out, which
causes the driver to send them again with a limit of 5 retries. There are
some situations in which 5 retries is not enough and the EMAD access fails.
If the failed EMAD was related to the flashing process, the driver fails
the flashing.
The reason for these timeouts during firmware flashing is cache misses in
the CPU running the firmware. In case the CPU needs to fetch instructions
from the flash when a firmware is flashed, it needs to wait for the
flashing to complete. Since flashing takes time, it is possible for pending
EMADs to timeout.
Fix by increasing EMADs' timeout while flashing firmware.
Fixes: ce6ef68f433f ("mlxsw: spectrum: Implement the ethtool flash_device callback")
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlxsw/core.c | 19 ++++++++++++++++++-
drivers/net/ethernet/mellanox/mlxsw/core.h | 3 +++
.../net/ethernet/mellanox/mlxsw/spectrum.c | 7 ++++++-
3 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index 30f751e69698..f7154f358f27 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -81,6 +81,7 @@ struct mlxsw_core {
struct mlxsw_core_port *ports;
unsigned int max_ports;
bool reload_fail;
+ bool fw_flash_in_progress;
unsigned long driver_priv[0];
/* driver_priv has to be always the last item */
};
@@ -428,12 +429,16 @@ struct mlxsw_reg_trans {
struct rcu_head rcu;
};
-#define MLXSW_EMAD_TIMEOUT_MS 200
+#define MLXSW_EMAD_TIMEOUT_DURING_FW_FLASH_MS 3000
+#define MLXSW_EMAD_TIMEOUT_MS 200
static void mlxsw_emad_trans_timeout_schedule(struct mlxsw_reg_trans *trans)
{
unsigned long timeout = msecs_to_jiffies(MLXSW_EMAD_TIMEOUT_MS);
+ if (trans->core->fw_flash_in_progress)
+ timeout = msecs_to_jiffies(MLXSW_EMAD_TIMEOUT_DURING_FW_FLASH_MS);
+
queue_delayed_work(trans->core->emad_wq, &trans->timeout_dw, timeout);
}
@@ -1854,6 +1859,18 @@ int mlxsw_core_kvd_sizes_get(struct mlxsw_core *mlxsw_core,
}
EXPORT_SYMBOL(mlxsw_core_kvd_sizes_get);
+void mlxsw_core_fw_flash_start(struct mlxsw_core *mlxsw_core)
+{
+ mlxsw_core->fw_flash_in_progress = true;
+}
+EXPORT_SYMBOL(mlxsw_core_fw_flash_start);
+
+void mlxsw_core_fw_flash_end(struct mlxsw_core *mlxsw_core)
+{
+ mlxsw_core->fw_flash_in_progress = false;
+}
+EXPORT_SYMBOL(mlxsw_core_fw_flash_end);
+
static int __init mlxsw_core_module_init(void)
{
int err;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.h b/drivers/net/ethernet/mellanox/mlxsw/core.h
index c35be477856f..c4e4971764e5 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.h
@@ -292,6 +292,9 @@ int mlxsw_core_kvd_sizes_get(struct mlxsw_core *mlxsw_core,
u64 *p_single_size, u64 *p_double_size,
u64 *p_linear_size);
+void mlxsw_core_fw_flash_start(struct mlxsw_core *mlxsw_core);
+void mlxsw_core_fw_flash_end(struct mlxsw_core *mlxsw_core);
+
bool mlxsw_core_res_valid(struct mlxsw_core *mlxsw_core,
enum mlxsw_res_id res_id);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index ada644d90029..3d1159f8a53f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -308,8 +308,13 @@ static int mlxsw_sp_firmware_flash(struct mlxsw_sp *mlxsw_sp,
},
.mlxsw_sp = mlxsw_sp
};
+ int err;
+
+ mlxsw_core_fw_flash_start(mlxsw_sp->core);
+ err = mlxfw_firmware_flash(&mlxsw_sp_mlxfw_dev.mlxfw_dev, firmware);
+ mlxsw_core_fw_flash_end(mlxsw_sp->core);
- return mlxfw_firmware_flash(&mlxsw_sp_mlxfw_dev.mlxfw_dev, firmware);
+ return err;
}
static int mlxsw_sp_fw_rev_validate(struct mlxsw_sp *mlxsw_sp)
--
2.19.1
next prev parent reply other threads:[~2018-12-26 22:49 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-26 22:34 [PATCH AUTOSEL 4.19 01/97] ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 02/97] pinctrl: meson: fix pull enable register calculation Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 03/97] arm64: dts: mt7622: fix no more console output on rfb1 Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 04/97] powerpc: Fix COFF zImage booting on old powermacs Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 05/97] powerpc/mm: Fix linux page tables build with some configs Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 06/97] HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 07/97] ARM: dts: imx7d-pico: Describe the Wifi clock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 08/97] ARM: imx: update the cpu power up timing setting on i.mx6sx Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 09/97] ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 10/97] IB/mlx5: Block DEVX umem from the non applicable cases Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 11/97] Input: restore EV_ABS ABS_RESERVED Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 12/97] powerpc/mm: Fallback to RAM if the altmap is unusable Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 13/97] drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 14/97] IB/core: Fix oops in netdev_next_upper_dev_rcu() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 15/97] checkstack.pl: fix for aarch64 Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 16/97] xfrm: Fix error return code in xfrm_output_one() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 17/97] xfrm: Fix bucket count reported to userspace Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 18/97] xfrm: Fix NULL pointer dereference in xfrm_input when skb_dst_force clears the dst_entry Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 19/97] ieee802154: hwsim: fix off-by-one in parse nested Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 20/97] netfilter: nf_tables: fix suspicious RCU usage in nft_chain_stats_replace() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 21/97] netfilter: seqadj: re-load tcp header pointer after possible head reallocation Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 22/97] Revert "scsi: qla2xxx: Fix NVMe Target discovery" Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 23/97] scsi: bnx2fc: Fix NULL dereference in error handling Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 24/97] Input: omap-keypad - fix idle configuration to not block SoC idle states Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 25/97] Input: synaptics - enable RMI on ThinkPad T560 Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 26/97] ibmvnic: Convert reset work item mutex to spin lock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 27/97] ibmvnic: Fix non-atomic memory allocation in IRQ context Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 28/97] nfp: flower: ensure TCP flags can be placed in IPv6 frame Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 29/97] ieee802154: ca8210: fix possible u8 overflow in ca8210_rx_done Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 30/97] x86/mm: Fix guard hole handling Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 31/97] x86/dump_pagetables: Fix LDT remap address marker Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 32/97] i40e: fix mac filter delete when setting mac address Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 33/97] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 34/97] ixgbe: Fix race when the VF driver does a reset Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 35/97] netfilter: ipset: do not call ipset_nest_end after nla_nest_cancel Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 36/97] netfilter: nat: can't use dst_hold on noref dst Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 37/97] netfilter: nf_conncount: use rb_link_node_rcu() instead of rb_link_node() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 38/97] bnx2x: Clear fip MAC when fcoe offload support is disabled Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 39/97] bnx2x: Remove configured vlans as part of unload sequence Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 40/97] bnx2x: Send update-svid ramrod with retry/poll flags enabled Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 41/97] scsi: target: iscsi: cxgbit: fix csk leak Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 42/97] scsi: target: iscsi: cxgbit: add missing spin_lock_init() Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 43/97] net/mlx5e: RX, Verify MPWQE stride size is in range Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 44/97] net/mlx5e: Cancel DIM work on close SQ Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 45/97] mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 46/97] x86, hyperv: remove PCI dependency Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 47/97] qed: Fix command number mismatch between driver and the mfw Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 48/97] drivers: net: xgene: Remove unnecessary forward declarations Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 49/97] net/tls: Init routines in create_ctx Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 50/97] w90p910_ether: remove incorrect __init annotation Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 51/97] qmi_wwan: Added support for Fibocom NL668 series Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 52/97] qmi_wwan: Added support for Telit LN940 series Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 53/97] net: clear skb->tstamp in forwarding paths Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 54/97] net: hns: Incorrect offset address used for some registers Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 55/97] net: hns: All ports can not work when insmod hns ko after rmmod Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 56/97] net: hns: Some registers use wrong address according to the datasheet Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 57/97] net: hns: Fixed bug that netdev was opened twice Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 58/97] net: hns: Clean rx fbd when ae stopped Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 59/97] net: hns: Free irq when exit from abnormal branch Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 60/97] net: hns: Avoid net reset caused by pause frames storm Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 61/97] net: hns: Fix ntuple-filters status error Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 62/97] net: hns: Add mac pcs config when enable|disable mac Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 63/97] net: hns: Fix ping failed when use net bridge and send multicast Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 64/97] net: mvneta: fix operation for 64K PAGE_SIZE Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 65/97] mac80211: fix a kernel panic when TXing after TXQ teardown Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 66/97] SUNRPC: Fix a race with XPRT_CONNECTING Sasha Levin
2018-12-26 22:35 ` Sasha Levin [this message]
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 68/97] net: mvpp2: 10G modes aren't supported on all ports Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 69/97] x86/mtrr: Don't copy uninitialized gentry fields back to userspace Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 70/97] qed: Fix an error code qed_ll2_start_xmit() Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 71/97] net: stmmac: Fix an error code in probe() Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 72/97] net: macb: restart tx after tx used bit read Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 73/97] net: macb: fix random memory corruption on RX with 64-bit DMA Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 74/97] net: macb: fix dropped RX frames due to a race Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 75/97] net: macb: add missing barriers when reading descriptors Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 76/97] lan743x: Expand phy search for LAN7431 Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 77/97] lan78xx: Resolve issue with changing MAC address Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 78/97] xen/netfront: tolerate frags with no data Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 79/97] vxge: ensure data0 is initialized in when fetching firmware version information Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 80/97] nl80211: fix memory leak if validate_pae_over_nl80211() fails Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 81/97] mac80211: free skb fraglist before freeing the skb Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 82/97] kbuild: fix false positive warning/error about missing libelf Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 83/97] m68k: Fix memblock-related crashes Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 84/97] net/mlx5e: RX, Fix wrong early return in receive queue poll Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 85/97] net/mlx5: Typo fix in del_sw_hw_rule Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 86/97] net/mlx5e: Remove the false indication of software timestamping support Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 87/97] virtio: fix test build after uio.h change Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 88/97] lan743x: Remove MAC Reset from initialization Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 89/97] net: mvpp2: fix the phylink mode validation Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 90/97] mscc: Configured MAC entries should be locked Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 91/97] gpio: mvebu: only fail on missing clk if pwm is actually to be used Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 92/97] Input: synaptics - enable SMBus for HP EliteBook 840 G4 Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 93/97] net: netxen: fix a missing check and an uninitialized use Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 94/97] qmi_wwan: Add support for Fibocom NL678 series Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 95/97] qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 96/97] serial/sunsu: fix refcount leak Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 97/97] auxdisplay: charlcd: fix x/y command parsing Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181226223557.149329-67-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=idosch@mellanox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=shalomt@mellanox.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox