From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Sasha Levin <sashal@kernel.org>,
linux-m68k@lists.linux-m68k.org
Subject: [PATCH AUTOSEL 4.19 83/97] m68k: Fix memblock-related crashes
Date: Wed, 26 Dec 2018 17:35:43 -0500 [thread overview]
Message-ID: <20181226223557.149329-83-sashal@kernel.org> (raw)
In-Reply-To: <20181226223557.149329-1-sashal@kernel.org>
From: Geert Uytterhoeven <geert@linux-m68k.org>
[ Upstream commit bed1369f51901b17108a4bb4f7210aab183bea42 ]
When running the kernel in Fast RAM on Atari:
Ignoring memory chunk at 0x0:0xe00000 before the first chunk
...
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<0069dbac>] free_all_bootmem+0x12c/0x186
SR: 2714 SP: (ptrval) a2: 005e3314
d0: 00000000 d1: 0000000a d2: 00000e00 d3: 00000000
d4: 005e1fc0 d5: 0000001a a0: 01000000 a1: 00000000
Process swapper (pid: 0, task=(ptrval))
Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736
wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 00000736 00000000
push data: 00000000 00000000 00000000 00000000
Stack from 005e1f84:
00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000
0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000
00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000
00000000 00000000 00000000 00000000 006b5006 00000000 00690872
Call Trace: [<0004f062>] printk+0x0/0x18
[<0003a220>] parse_args+0x0/0x2d4
[<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4
[<00693cd8>] mem_init+0xa/0x5c
[<0004f062>] printk+0x0/0x18
[<0003a220>] parse_args+0x0/0x2d4
[<00691be6>] start_kernel+0x1ca/0x462
[<00690872>] _sinittext+0x872/0x11f8
Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill the idle task!
As the kernel must run in the memory chunk with the lowest address,
ST-RAM is ignored, and removed from the m68k_memory[] array.
However, it is not removed from memblock, causing a crash later.
More investigation shows that there are 3 places where memory chunks are
ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(),
and thus causing crashes:
1. On classic m68k CPUs with a MMU, paging_init() ignores all memory
chunks below the first chunk, cfr. above,
2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all
Zorro II memory,
3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all
but the first memory chunk.
Fix this by moving the calls to memblock_add() from
m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks
have been removed from m68k_memory[].
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/m68k/kernel/setup_mm.c | 2 --
arch/m68k/mm/motorola.c | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 5d3596c180f9..de44899c0e61 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -165,8 +165,6 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
be32_to_cpu(m->addr);
m68k_memory[m68k_num_memory].size =
be32_to_cpu(m->size);
- memblock_add(m68k_memory[m68k_num_memory].addr,
- m68k_memory[m68k_num_memory].size);
m68k_num_memory++;
} else
pr_warn("%s: too many memory chunks\n",
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 4e17ecb5928a..2eb2b31fb16a 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -228,6 +228,7 @@ void __init paging_init(void)
min_addr = m68k_memory[0].addr;
max_addr = min_addr + m68k_memory[0].size;
+ memblock_add(m68k_memory[0].addr, m68k_memory[0].size);
for (i = 1; i < m68k_num_memory;) {
if (m68k_memory[i].addr < min_addr) {
printk("Ignoring memory chunk at 0x%lx:0x%lx before the first chunk\n",
@@ -238,6 +239,7 @@ void __init paging_init(void)
(m68k_num_memory - i) * sizeof(struct m68k_mem_info));
continue;
}
+ memblock_add(m68k_memory[i].addr, m68k_memory[i].size);
addr = m68k_memory[i].addr + m68k_memory[i].size;
if (addr > max_addr)
max_addr = addr;
--
2.19.1
next prev parent reply other threads:[~2018-12-26 22:38 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-26 22:34 [PATCH AUTOSEL 4.19 01/97] ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 02/97] pinctrl: meson: fix pull enable register calculation Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 03/97] arm64: dts: mt7622: fix no more console output on rfb1 Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 04/97] powerpc: Fix COFF zImage booting on old powermacs Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 05/97] powerpc/mm: Fix linux page tables build with some configs Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 06/97] HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 07/97] ARM: dts: imx7d-pico: Describe the Wifi clock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 08/97] ARM: imx: update the cpu power up timing setting on i.mx6sx Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 09/97] ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 10/97] IB/mlx5: Block DEVX umem from the non applicable cases Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 11/97] Input: restore EV_ABS ABS_RESERVED Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 12/97] powerpc/mm: Fallback to RAM if the altmap is unusable Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 13/97] drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 14/97] IB/core: Fix oops in netdev_next_upper_dev_rcu() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 15/97] checkstack.pl: fix for aarch64 Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 16/97] xfrm: Fix error return code in xfrm_output_one() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 17/97] xfrm: Fix bucket count reported to userspace Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 18/97] xfrm: Fix NULL pointer dereference in xfrm_input when skb_dst_force clears the dst_entry Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 19/97] ieee802154: hwsim: fix off-by-one in parse nested Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 20/97] netfilter: nf_tables: fix suspicious RCU usage in nft_chain_stats_replace() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 21/97] netfilter: seqadj: re-load tcp header pointer after possible head reallocation Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 22/97] Revert "scsi: qla2xxx: Fix NVMe Target discovery" Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 23/97] scsi: bnx2fc: Fix NULL dereference in error handling Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 24/97] Input: omap-keypad - fix idle configuration to not block SoC idle states Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 25/97] Input: synaptics - enable RMI on ThinkPad T560 Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 26/97] ibmvnic: Convert reset work item mutex to spin lock Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 27/97] ibmvnic: Fix non-atomic memory allocation in IRQ context Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 28/97] nfp: flower: ensure TCP flags can be placed in IPv6 frame Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 29/97] ieee802154: ca8210: fix possible u8 overflow in ca8210_rx_done Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 30/97] x86/mm: Fix guard hole handling Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 31/97] x86/dump_pagetables: Fix LDT remap address marker Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 32/97] i40e: fix mac filter delete when setting mac address Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 33/97] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 34/97] ixgbe: Fix race when the VF driver does a reset Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 35/97] netfilter: ipset: do not call ipset_nest_end after nla_nest_cancel Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 36/97] netfilter: nat: can't use dst_hold on noref dst Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 37/97] netfilter: nf_conncount: use rb_link_node_rcu() instead of rb_link_node() Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 38/97] bnx2x: Clear fip MAC when fcoe offload support is disabled Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 39/97] bnx2x: Remove configured vlans as part of unload sequence Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 40/97] bnx2x: Send update-svid ramrod with retry/poll flags enabled Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 41/97] scsi: target: iscsi: cxgbit: fix csk leak Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 42/97] scsi: target: iscsi: cxgbit: add missing spin_lock_init() Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 43/97] net/mlx5e: RX, Verify MPWQE stride size is in range Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 44/97] net/mlx5e: Cancel DIM work on close SQ Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 45/97] mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 46/97] x86, hyperv: remove PCI dependency Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 47/97] qed: Fix command number mismatch between driver and the mfw Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 48/97] drivers: net: xgene: Remove unnecessary forward declarations Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 49/97] net/tls: Init routines in create_ctx Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 50/97] w90p910_ether: remove incorrect __init annotation Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 51/97] qmi_wwan: Added support for Fibocom NL668 series Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 52/97] qmi_wwan: Added support for Telit LN940 series Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 53/97] net: clear skb->tstamp in forwarding paths Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 54/97] net: hns: Incorrect offset address used for some registers Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 55/97] net: hns: All ports can not work when insmod hns ko after rmmod Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 56/97] net: hns: Some registers use wrong address according to the datasheet Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 57/97] net: hns: Fixed bug that netdev was opened twice Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 58/97] net: hns: Clean rx fbd when ae stopped Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 59/97] net: hns: Free irq when exit from abnormal branch Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 60/97] net: hns: Avoid net reset caused by pause frames storm Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 61/97] net: hns: Fix ntuple-filters status error Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 62/97] net: hns: Add mac pcs config when enable|disable mac Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 63/97] net: hns: Fix ping failed when use net bridge and send multicast Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 64/97] net: mvneta: fix operation for 64K PAGE_SIZE Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 65/97] mac80211: fix a kernel panic when TXing after TXQ teardown Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 66/97] SUNRPC: Fix a race with XPRT_CONNECTING Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 67/97] mlxsw: core: Increase timeout during firmware flash process Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 68/97] net: mvpp2: 10G modes aren't supported on all ports Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 69/97] x86/mtrr: Don't copy uninitialized gentry fields back to userspace Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 70/97] qed: Fix an error code qed_ll2_start_xmit() Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 71/97] net: stmmac: Fix an error code in probe() Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 72/97] net: macb: restart tx after tx used bit read Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 73/97] net: macb: fix random memory corruption on RX with 64-bit DMA Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 74/97] net: macb: fix dropped RX frames due to a race Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 75/97] net: macb: add missing barriers when reading descriptors Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 76/97] lan743x: Expand phy search for LAN7431 Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 77/97] lan78xx: Resolve issue with changing MAC address Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 78/97] xen/netfront: tolerate frags with no data Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 79/97] vxge: ensure data0 is initialized in when fetching firmware version information Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 80/97] nl80211: fix memory leak if validate_pae_over_nl80211() fails Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 81/97] mac80211: free skb fraglist before freeing the skb Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 82/97] kbuild: fix false positive warning/error about missing libelf Sasha Levin
2018-12-26 22:35 ` Sasha Levin [this message]
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 84/97] net/mlx5e: RX, Fix wrong early return in receive queue poll Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 85/97] net/mlx5: Typo fix in del_sw_hw_rule Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 86/97] net/mlx5e: Remove the false indication of software timestamping support Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 87/97] virtio: fix test build after uio.h change Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 88/97] lan743x: Remove MAC Reset from initialization Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 89/97] net: mvpp2: fix the phylink mode validation Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 90/97] mscc: Configured MAC entries should be locked Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 91/97] gpio: mvebu: only fail on missing clk if pwm is actually to be used Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 92/97] Input: synaptics - enable SMBus for HP EliteBook 840 G4 Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 93/97] net: netxen: fix a missing check and an uninitialized use Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 94/97] qmi_wwan: Add support for Fibocom NL678 series Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 95/97] qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 96/97] serial/sunsu: fix refcount leak Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 97/97] auxdisplay: charlcd: fix x/y command parsing Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181226223557.149329-83-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox