* [PATCH v3 treewide] headers: separate linux/mod_devicetable.h from linux/platform_device.h
@ 2018-06-20 5:47 Randy Dunlap
2018-07-07 15:53 ` Greg Kroah-Hartman
0 siblings, 1 reply; 5+ messages in thread
From: Randy Dunlap @ 2018-06-20 5:47 UTC (permalink / raw)
To: LKML, Andrew Morton, Greg Kroah-Hartman; +Cc: kbuild test robot
From: Randy Dunlap <rdunlap@infradead.org>
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel. It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.
4146 #include <linux/platform_device.h>
After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.
225 #include <linux/mod_devicetable.h>
This patch was build-tested on 20 different arch-es.
It also makes these drivers SubmitChecklist#1 compliant.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
---
v3: add fix for drivers/pinctrl/pinctrl-u300.c
v2: add fixes for drivers/media/platform/vimc/
arch/arm/mach-mmp/sram.c | 1 +
drivers/ata/pata_imx.c | 1 +
drivers/ata/pata_samsung_cf.c | 1 +
drivers/auxdisplay/hd44780.c | 1 +
drivers/char/hw_random/atmel-rng.c | 1 +
drivers/char/hw_random/exynos-trng.c | 1 +
drivers/char/hw_random/imx-rngc.c | 1 +
drivers/char/hw_random/powernv-rng.c | 1 +
drivers/crypto/mediatek/mtk-platform.c | 1 +
drivers/crypto/qce/core.c | 1 +
drivers/crypto/stm32/stm32_crc32.c | 1 +
drivers/crypto/ux500/cryp/cryp_core.c | 1 +
drivers/crypto/ux500/hash/hash_core.c | 1 +
drivers/devfreq/tegra-devfreq.c | 1 +
drivers/dma/ep93xx_dma.c | 1 +
drivers/dma/s3c24xx-dma.c | 1 +
drivers/extcon/extcon-intel-cht-wc.c | 1 +
drivers/extcon/extcon-qcom-spmi-misc.c | 1 +
drivers/gpu/drm/mediatek/mtk_cec.c | 1 +
drivers/gpu/drm/sun4i/sun6i_drc.c | 1 +
drivers/hsi/controllers/omap_ssi_port.c | 1 +
drivers/hwmon/max197.c | 1 +
drivers/hwmon/mc13783-adc.c | 1 +
drivers/media/platform/coda/imx-vdoa.c | 1 +
drivers/media/platform/rcar-fcp.c | 1 +
drivers/media/platform/vimc/vimc-capture.c | 1 +
drivers/media/platform/vimc/vimc-debayer.c | 1 +
drivers/media/platform/vimc/vimc-scaler.c | 1 +
drivers/media/platform/vimc/vimc-sensor.c | 1 +
drivers/memory/tegra/tegra186.c | 1 +
drivers/mfd/atmel-hlcdc.c | 1 +
drivers/mfd/cros_ec_dev.c | 1 +
drivers/mtd/nand/raw/brcmnand/brcmstb_nand.c | 1 +
drivers/net/ethernet/calxeda/xgmac.c | 1 +
drivers/net/ethernet/faraday/ftmac100.c | 1 +
drivers/net/wireless/ath/ath9k/ahb.c | 1 +
drivers/net/wireless/ti/wl12xx/main.c | 1 +
drivers/net/wireless/ti/wl18xx/main.c | 1 +
drivers/nvmem/lpc18xx_eeprom.c | 1 +
drivers/nvmem/mtk-efuse.c | 1 +
drivers/nvmem/qfprom.c | 1 +
drivers/nvmem/uniphier-efuse.c | 1 +
drivers/perf/arm-ccn.c | 1 +
drivers/pinctrl/intel/pinctrl-merrifield.c | 1 +
drivers/pinctrl/pinctrl-u300.c | 1 +
drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-ld4.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-ld6b.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-pxs2.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-sld8.c | 1 +
drivers/platform/goldfish/goldfish_pipe.c | 1 +
drivers/platform/x86/intel_bxtwc_tmu.c | 1 +
drivers/power/avs/smartreflex.c | 1 +
drivers/power/reset/ltc2952-poweroff.c | 1 +
drivers/power/supply/max8998_charger.c | 1 +
drivers/power/supply/olpc_battery.c | 1 +
drivers/ptp/ptp_dte.c | 1 +
drivers/regulator/tps65912-regulator.c | 1 +
drivers/reset/reset-ath79.c | 1 +
drivers/reset/reset-axs10x.c | 1 +
drivers/reset/reset-imx7.c | 1 +
drivers/rtc/rtc-coh901331.c | 1 +
drivers/rtc/rtc-cpcap.c | 1 +
drivers/rtc/rtc-ftrtc010.c | 1 +
drivers/rtc/rtc-mc13xxx.c | 1 +
drivers/rtc/rtc-mxc_v2.c | 1 +
drivers/rtc/rtc-r7301.c | 1 +
drivers/rtc/rtc-sh.c | 1 +
drivers/rtc/rtc-tegra.c | 1 +
drivers/siox/siox-bus-gpio.c | 1 +
drivers/tty/goldfish.c | 1 +
drivers/tty/serial/8250/8250_em.c | 1 +
drivers/tty/serial/sccnxp.c | 1 +
drivers/usb/gadget/udc/fsl_mxc_udc.c | 1 +
drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c | 1 +
drivers/w1/masters/mxc_w1.c | 1 +
drivers/watchdog/coh901327_wdt.c | 1 +
drivers/watchdog/davinci_wdt.c | 1 +
drivers/watchdog/imgpdc_wdt.c | 1 +
drivers/watchdog/max63xx_wdt.c | 1 +
drivers/watchdog/max77620_wdt.c | 1 +
drivers/watchdog/moxart_wdt.c | 1 +
drivers/watchdog/omap_wdt.c | 1 +
drivers/watchdog/tangox_wdt.c | 1 +
include/linux/platform_device.h | 2 +-
90 files changed, 90 insertions(+), 1 deletion(-)
--- lnx-418-rc1.orig/include/linux/platform_device.h
+++ lnx-418-rc1/include/linux/platform_device.h
@@ -12,13 +12,13 @@
#define _PLATFORM_DEVICE_H_
#include <linux/device.h>
-#include <linux/mod_devicetable.h>
#define PLATFORM_DEVID_NONE (-1)
#define PLATFORM_DEVID_AUTO (-2)
struct mfd_cell;
struct property_entry;
+struct platform_device_id;
struct platform_device {
const char *name;
--- lnx-418-rc1.orig/drivers/auxdisplay/hd44780.c
+++ lnx-418-rc1/drivers/auxdisplay/hd44780.c
@@ -9,6 +9,7 @@
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/slab.h>
--- lnx-418-rc1.orig/drivers/char/hw_random/exynos-trng.c
+++ lnx-418-rc1/drivers/char/hw_random/exynos-trng.c
@@ -19,6 +19,7 @@
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
--- lnx-418-rc1.orig/drivers/crypto/mediatek/mtk-platform.c
+++ lnx-418-rc1/drivers/crypto/mediatek/mtk-platform.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include "mtk-platform.h"
--- lnx-418-rc1.orig/drivers/crypto/qce/core.c
+++ lnx-418-rc1/drivers/crypto/qce/core.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/types.h>
--- lnx-418-rc1.orig/drivers/dma/ep93xx_dma.c
+++ lnx-418-rc1/drivers/dma/ep93xx_dma.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
--- lnx-418-rc1.orig/drivers/dma/s3c24xx-dma.c
+++ lnx-418-rc1/drivers/dma/s3c24xx-dma.c
@@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/platform_data/dma-s3c24xx.h>
--- lnx-418-rc1.orig/drivers/extcon/extcon-intel-cht-wc.c
+++ lnx-418-rc1/drivers/extcon/extcon-intel-cht-wc.c
@@ -20,6 +20,7 @@
#include <linux/kernel.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
--- lnx-418-rc1.orig/drivers/extcon/extcon-qcom-spmi-misc.c
+++ lnx-418-rc1/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -20,6 +20,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
--- lnx-418-rc1.orig/drivers/hwmon/max197.c
+++ lnx-418-rc1/drivers/hwmon/max197.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
--- lnx-418-rc1.orig/drivers/hwmon/mc13783-adc.c
+++ lnx-418-rc1/drivers/hwmon/mc13783-adc.c
@@ -23,6 +23,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/hwmon.h>
#include <linux/slab.h>
#include <linux/init.h>
--- lnx-418-rc1.orig/drivers/mfd/cros_ec_dev.c
+++ lnx-418-rc1/drivers/mfd/cros_ec_dev.c
@@ -20,6 +20,7 @@
#include <linux/fs.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/slab.h>
--- lnx-418-rc1.orig/drivers/media/platform/coda/imx-vdoa.c
+++ lnx-418-rc1/drivers/media/platform/coda/imx-vdoa.c
@@ -18,6 +18,7 @@
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/videodev2.h>
--- lnx-418-rc1.orig/drivers/mfd/atmel-hlcdc.c
+++ lnx-418-rc1/drivers/mfd/atmel-hlcdc.c
@@ -22,6 +22,7 @@
#include <linux/mfd/atmel-hlcdc.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
--- lnx-418-rc1.orig/drivers/media/platform/rcar-fcp.c
+++ lnx-418-rc1/drivers/media/platform/rcar-fcp.c
@@ -14,6 +14,7 @@
#include <linux/device.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
--- lnx-418-rc1.orig/drivers/nvmem/lpc18xx_eeprom.c
+++ lnx-418-rc1/drivers/nvmem/lpc18xx_eeprom.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
--- lnx-418-rc1.orig/drivers/net/ethernet/calxeda/xgmac.c
+++ lnx-418-rc1/drivers/net/ethernet/calxeda/xgmac.c
@@ -14,6 +14,7 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/kernel.h>
#include <linux/circ_buf.h>
#include <linux/interrupt.h>
--- lnx-418-rc1.orig/drivers/nvmem/mtk-efuse.c
+++ lnx-418-rc1/drivers/nvmem/mtk-efuse.c
@@ -14,6 +14,7 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/io.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/net/wireless/ath/ath9k/ahb.c
+++ lnx-418-rc1/drivers/net/wireless/ath/ath9k/ahb.c
@@ -19,6 +19,7 @@
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include "ath9k.h"
static const struct platform_device_id ath9k_platform_id_table[] = {
--- lnx-418-rc1.orig/drivers/nvmem/qfprom.c
+++ lnx-418-rc1/drivers/nvmem/qfprom.c
@@ -13,6 +13,7 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/io.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/net/wireless/ti/wl12xx/main.c
+++ lnx-418-rc1/drivers/net/wireless/ti/wl12xx/main.c
@@ -20,6 +20,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/err.h>
--- lnx-418-rc1.orig/drivers/net/wireless/ti/wl18xx/main.c
+++ lnx-418-rc1/drivers/net/wireless/ti/wl18xx/main.c
@@ -20,6 +20,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/ip.h>
#include <linux/firmware.h>
--- lnx-418-rc1.orig/drivers/nvmem/uniphier-efuse.c
+++ lnx-418-rc1/drivers/nvmem/uniphier-efuse.c
@@ -16,6 +16,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/intel/pinctrl-merrifield.c
+++ lnx-418-rc1/drivers/pinctrl/intel/pinctrl-merrifield.c
@@ -13,6 +13,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
--- lnx-418-rc1.orig/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
+++ lnx-418-rc1/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
@@ -13,6 +13,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include "pinctrl-sprd.h"
--- lnx-418-rc1.orig/drivers/platform/x86/intel_bxtwc_tmu.c
+++ lnx-418-rc1/drivers/platform/x86/intel_bxtwc_tmu.c
@@ -19,6 +19,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/mfd/intel_soc_pmic.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-ld4.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-ld4.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-sld8.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-sld8.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs2.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs2.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-ld6b.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-ld6b.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c
+++ lnx-418-rc1/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/power/reset/ltc2952-poweroff.c
+++ lnx-418-rc1/drivers/power/reset/ltc2952-poweroff.c
@@ -62,6 +62,7 @@
#include <linux/slab.h>
#include <linux/kmod.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/gpio/consumer.h>
#include <linux/reboot.h>
--- lnx-418-rc1.orig/drivers/power/supply/max8998_charger.c
+++ lnx-418-rc1/drivers/power/supply/max8998_charger.c
@@ -21,6 +21,7 @@
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
--- lnx-418-rc1.orig/drivers/ptp/ptp_dte.c
+++ lnx-418-rc1/drivers/ptp/ptp_dte.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/ptp_clock_kernel.h>
#include <linux/types.h>
--- lnx-418-rc1.orig/drivers/regulator/tps65912-regulator.c
+++ lnx-418-rc1/drivers/regulator/tps65912-regulator.c
@@ -18,6 +18,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
--- lnx-418-rc1.orig/drivers/reset/reset-ath79.c
+++ lnx-418-rc1/drivers/reset/reset-ath79.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/reboot.h>
--- lnx-418-rc1.orig/drivers/reset/reset-axs10x.c
+++ lnx-418-rc1/drivers/reset/reset-axs10x.c
@@ -10,6 +10,7 @@
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
--- lnx-418-rc1.orig/drivers/reset/reset-imx7.c
+++ lnx-418-rc1/drivers/reset/reset-imx7.c
@@ -16,6 +16,7 @@
*/
#include <linux/mfd/syscon.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/regmap.h>
--- lnx-418-rc1.orig/drivers/rtc/rtc-coh901331.c
+++ lnx-418-rc1/drivers/rtc/rtc-coh901331.c
@@ -8,6 +8,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/rtc.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
--- lnx-418-rc1.orig/drivers/siox/siox-bus-gpio.c
+++ lnx-418-rc1/drivers/siox/siox-bus-gpio.c
@@ -5,6 +5,7 @@
#include <linux/gpio/consumer.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
--- lnx-418-rc1.orig/drivers/rtc/rtc-cpcap.c
+++ lnx-418-rc1/drivers/rtc/rtc-cpcap.c
@@ -24,6 +24,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/rtc/rtc-ftrtc010.c
+++ lnx-418-rc1/drivers/rtc/rtc-ftrtc010.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/clk.h>
#define DRV_NAME "rtc-ftrtc010"
--- lnx-418-rc1.orig/drivers/rtc/rtc-mc13xxx.c
+++ lnx-418-rc1/drivers/rtc/rtc-mc13xxx.c
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/rtc.h>
--- lnx-418-rc1.orig/drivers/rtc/rtc-r7301.c
+++ lnx-418-rc1/drivers/rtc/rtc-r7301.c
@@ -11,6 +11,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/rtc/rtc-tegra.c
+++ lnx-418-rc1/drivers/rtc/rtc-tegra.c
@@ -25,6 +25,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/rtc.h>
--- lnx-418-rc1.orig/drivers/tty/serial/sccnxp.c
+++ lnx-418-rc1/drivers/tty/serial/sccnxp.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/device.h>
#include <linux/console.h>
#include <linux/serial_core.h>
--- lnx-418-rc1.orig/drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c
+++ lnx-418-rc1/drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c
@@ -12,6 +12,7 @@
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
--- lnx-418-rc1.orig/drivers/w1/masters/mxc_w1.c
+++ lnx-418-rc1/drivers/w1/masters/mxc_w1.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/w1.h>
--- lnx-418-rc1.orig/drivers/watchdog/davinci_wdt.c
+++ lnx-418-rc1/drivers/watchdog/davinci_wdt.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/mod_devicetable.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/watchdog.h>
--- lnx-418-rc1.orig/drivers/watchdog/imgpdc_wdt.c
+++ lnx-418-rc1/drivers/watchdog/imgpdc_wdt.c
@@ -44,6 +44,7 @@
#include <linux/io.h>
#include <linux/log2.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/watchdog.h>
--- lnx-418-rc1.orig/drivers/watchdog/max63xx_wdt.c
+++ lnx-418-rc1/drivers/watchdog/max63xx_wdt.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/mod_devicetable.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/watchdog.h>
--- lnx-418-rc1.orig/drivers/watchdog/max77620_wdt.c
+++ lnx-418-rc1/drivers/watchdog/max77620_wdt.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/mfd/max77620.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
--- lnx-418-rc1.orig/drivers/watchdog/moxart_wdt.c
+++ lnx-418-rc1/drivers/watchdog/moxart_wdt.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/watchdog/omap_wdt.c
+++ lnx-418-rc1/drivers/watchdog/omap_wdt.c
@@ -29,6 +29,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
--- lnx-418-rc1.orig/drivers/watchdog/tangox_wdt.c
+++ lnx-418-rc1/drivers/watchdog/tangox_wdt.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
--- lnx-418-rc1.orig/drivers/tty/goldfish.c
+++ lnx-418-rc1/drivers/tty/goldfish.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/goldfish.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
--- lnx-418-rc1.orig/drivers/net/ethernet/faraday/ftmac100.c
+++ lnx-418-rc1/drivers/net/ethernet/faraday/ftmac100.c
@@ -29,6 +29,7 @@
#include <linux/io.h>
#include <linux/mii.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/netdevice.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/power/supply/olpc_battery.c
+++ lnx-418-rc1/drivers/power/supply/olpc_battery.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/device.h>
--- lnx-418-rc1.orig/arch/arm/mach-mmp/sram.c
+++ lnx-418-rc1/arch/arm/mach-mmp/sram.c
@@ -15,6 +15,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
--- lnx-418-rc1.orig/drivers/ata/pata_imx.c
+++ lnx-418-rc1/drivers/ata/pata_imx.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/libata.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#define DRV_NAME "pata_imx"
--- lnx-418-rc1.orig/drivers/ata/pata_samsung_cf.c
+++ lnx-418-rc1/drivers/ata/pata_samsung_cf.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/libata.h>
--- lnx-418-rc1.orig/drivers/char/hw_random/atmel-rng.c
+++ lnx-418-rc1/drivers/char/hw_random/atmel-rng.c
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
--- lnx-418-rc1.orig/drivers/char/hw_random/imx-rngc.c
+++ lnx-418-rc1/drivers/char/hw_random/imx-rngc.c
@@ -13,6 +13,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/clk.h>
--- lnx-418-rc1.orig/drivers/crypto/stm32/stm32_crc32.c
+++ lnx-418-rc1/drivers/crypto/stm32/stm32_crc32.c
@@ -7,6 +7,7 @@
#include <linux/bitrev.h>
#include <linux/clk.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <crypto/internal/hash.h>
--- lnx-418-rc1.orig/drivers/crypto/ux500/cryp/cryp_core.c
+++ lnx-418-rc1/drivers/crypto/ux500/cryp/cryp_core.c
@@ -20,6 +20,7 @@
#include <linux/irqreturn.h>
#include <linux/klist.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/semaphore.h>
--- lnx-418-rc1.orig/drivers/crypto/ux500/hash/hash_core.c
+++ lnx-418-rc1/drivers/crypto/ux500/hash/hash_core.c
@@ -21,6 +21,7 @@
#include <linux/klist.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/crypto.h>
--- lnx-418-rc1.orig/drivers/devfreq/tegra-devfreq.c
+++ lnx-418-rc1/drivers/devfreq/tegra-devfreq.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/reset.h>
--- lnx-418-rc1.orig/drivers/gpu/drm/mediatek/mtk_cec.c
+++ lnx-418-rc1/drivers/gpu/drm/mediatek/mtk_cec.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include "mtk_cec.h"
--- lnx-418-rc1.orig/drivers/gpu/drm/sun4i/sun6i_drc.c
+++ lnx-418-rc1/drivers/gpu/drm/sun4i/sun6i_drc.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
--- lnx-418-rc1.orig/drivers/hsi/controllers/omap_ssi_port.c
+++ lnx-418-rc1/drivers/hsi/controllers/omap_ssi_port.c
@@ -20,6 +20,7 @@
* 02110-1301 USA
*/
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
--- lnx-418-rc1.orig/drivers/mtd/nand/raw/brcmnand/brcmstb_nand.c
+++ lnx-418-rc1/drivers/mtd/nand/raw/brcmnand/brcmstb_nand.c
@@ -13,6 +13,7 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include "brcmnand.h"
--- lnx-418-rc1.orig/drivers/perf/arm-ccn.c
+++ lnx-418-rc1/drivers/perf/arm-ccn.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/perf_event.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
--- lnx-418-rc1.orig/drivers/platform/goldfish/goldfish_pipe.c
+++ lnx-418-rc1/drivers/platform/goldfish/goldfish_pipe.c
@@ -48,6 +48,7 @@
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
--- lnx-418-rc1.orig/drivers/power/avs/smartreflex.c
+++ lnx-418-rc1/drivers/power/avs/smartreflex.c
@@ -18,6 +18,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/io.h>
--- lnx-418-rc1.orig/drivers/rtc/rtc-mxc_v2.c
+++ lnx-418-rc1/drivers/rtc/rtc-mxc_v2.c
@@ -8,6 +8,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
--- lnx-418-rc1.orig/drivers/rtc/rtc-sh.c
+++ lnx-418-rc1/drivers/rtc/rtc-sh.c
@@ -15,6 +15,7 @@
* for more details.
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/kernel.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
--- lnx-418-rc1.orig/drivers/tty/serial/8250/8250_em.c
+++ lnx-418-rc1/drivers/tty/serial/8250/8250_em.c
@@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/platform_device.h>
--- lnx-418-rc1.orig/drivers/usb/gadget/udc/fsl_mxc_udc.c
+++ lnx-418-rc1/drivers/usb/gadget/udc/fsl_mxc_udc.c
@@ -11,6 +11,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fsl_devices.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/io.h>
--- lnx-418-rc1.orig/drivers/watchdog/coh901327_wdt.c
+++ lnx-418-rc1/drivers/watchdog/coh901327_wdt.c
@@ -7,6 +7,7 @@
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/interrupt.h>
--- lnx-418-rc1.orig/drivers/memory/tegra/tegra186.c
+++ lnx-418-rc1/drivers/memory/tegra/tegra186.c
@@ -8,6 +8,7 @@
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <dt-bindings/memory/tegra186-mc.h>
--- lnx-418-rc1.orig/drivers/char/hw_random/powernv-rng.c
+++ lnx-418-rc1/drivers/char/hw_random/powernv-rng.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/random.h>
--- lnx-418-rc1.orig/drivers/media/platform/vimc/vimc-capture.c
+++ lnx-418-rc1/drivers/media/platform/vimc/vimc-capture.c
@@ -17,6 +17,7 @@
#include <linux/component.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-core.h>
--- lnx-418-rc1.orig/drivers/media/platform/vimc/vimc-debayer.c
+++ lnx-418-rc1/drivers/media/platform/vimc/vimc-debayer.c
@@ -17,6 +17,7 @@
#include <linux/component.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/vmalloc.h>
#include <linux/v4l2-mediabus.h>
--- lnx-418-rc1.orig/drivers/media/platform/vimc/vimc-scaler.c
+++ lnx-418-rc1/drivers/media/platform/vimc/vimc-scaler.c
@@ -17,6 +17,7 @@
#include <linux/component.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/vmalloc.h>
#include <linux/v4l2-mediabus.h>
--- lnx-418-rc1.orig/drivers/media/platform/vimc/vimc-sensor.c
+++ lnx-418-rc1/drivers/media/platform/vimc/vimc-sensor.c
@@ -19,6 +19,7 @@
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/v4l2-mediabus.h>
#include <linux/vmalloc.h>
--- lnx-418-rc1.orig/drivers/pinctrl/pinctrl-u300.c
+++ lnx-418-rc1/drivers/pinctrl/pinctrl-u300.c
@@ -13,6 +13,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 treewide] headers: separate linux/mod_devicetable.h from linux/platform_device.h
2018-06-20 5:47 [PATCH v3 treewide] headers: separate linux/mod_devicetable.h from linux/platform_device.h Randy Dunlap
@ 2018-07-07 15:53 ` Greg Kroah-Hartman
2018-12-29 1:32 ` NeilBrown
0 siblings, 1 reply; 5+ messages in thread
From: Greg Kroah-Hartman @ 2018-07-07 15:53 UTC (permalink / raw)
To: Randy Dunlap; +Cc: LKML, Andrew Morton, kbuild test robot
On Tue, Jun 19, 2018 at 10:47:28PM -0700, Randy Dunlap wrote:
> From: Randy Dunlap <rdunlap@infradead.org>
>
> At over 4000 #includes, <linux/platform_device.h> is the 9th most
> #included header file in the Linux kernel. It does not need
> <linux/mod_devicetable.h>, so drop that header and explicitly add
> <linux/mod_devicetable.h> to source files that need it.
>
> 4146 #include <linux/platform_device.h>
>
> After this patch, there are 225 files that use <linux/mod_devicetable.h>,
> for a reduction of around 3900 times that <linux/mod_devicetable.h>
> does not have to be read & parsed.
>
> 225 #include <linux/mod_devicetable.h>
>
> This patch was build-tested on 20 different arch-es.
>
> It also makes these drivers SubmitChecklist#1 compliant.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
> Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
> ---
> v3: add fix for drivers/pinctrl/pinctrl-u300.c
> v2: add fixes for drivers/media/platform/vimc/
I've queued this up now, let's see what else breaks! :)
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 treewide] headers: separate linux/mod_devicetable.h from linux/platform_device.h
2018-07-07 15:53 ` Greg Kroah-Hartman
@ 2018-12-29 1:32 ` NeilBrown
2018-12-29 2:10 ` Randy Dunlap
2018-12-29 12:23 ` Greg Kroah-Hartman
0 siblings, 2 replies; 5+ messages in thread
From: NeilBrown @ 2018-12-29 1:32 UTC (permalink / raw)
To: Greg Kroah-Hartman, Randy Dunlap; +Cc: LKML, Andrew Morton, kbuild test robot
[-- Attachment #1: Type: text/plain, Size: 2590 bytes --]
On Sat, Jul 07 2018, Greg Kroah-Hartman wrote:
> On Tue, Jun 19, 2018 at 10:47:28PM -0700, Randy Dunlap wrote:
>> From: Randy Dunlap <rdunlap@infradead.org>
>>
>> At over 4000 #includes, <linux/platform_device.h> is the 9th most
>> #included header file in the Linux kernel. It does not need
>> <linux/mod_devicetable.h>, so drop that header and explicitly add
>> <linux/mod_devicetable.h> to source files that need it.
>>
>> 4146 #include <linux/platform_device.h>
>>
>> After this patch, there are 225 files that use <linux/mod_devicetable.h>,
>> for a reduction of around 3900 times that <linux/mod_devicetable.h>
>> does not have to be read & parsed.
>>
>> 225 #include <linux/mod_devicetable.h>
>>
>> This patch was build-tested on 20 different arch-es.
>>
>> It also makes these drivers SubmitChecklist#1 compliant.
>>
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
>> Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
>> ---
>> v3: add fix for drivers/pinctrl/pinctrl-u300.c
>> v2: add fixes for drivers/media/platform/vimc/
>
> I've queued this up now, let's see what else breaks! :)
Some MIPS watchdog drivers break, at least.
NeilBrown
From: NeilBrown <neil@brown.name>
Subject: [PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c
These files need
#include <linux/mod_devicetable.h>
to compile correctly.
Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: NeilBrown <neil@brown.name>
---
drivers/watchdog/mt7621_wdt.c | 1 +
drivers/watchdog/rt2880_wdt.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
index 5c4a764717c4..81208cd3f4ec 100644
--- a/drivers/watchdog/mt7621_wdt.c
+++ b/drivers/watchdog/mt7621_wdt.c
@@ -17,6 +17,7 @@
#include <linux/watchdog.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
#include <asm/mach-ralink/ralink_regs.h>
diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
index 98967f0a7d10..db7c57d82cfd 100644
--- a/drivers/watchdog/rt2880_wdt.c
+++ b/drivers/watchdog/rt2880_wdt.c
@@ -18,6 +18,7 @@
#include <linux/watchdog.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
#include <asm/mach-ralink/ralink_regs.h>
--
2.14.0.rc0.dirty
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 treewide] headers: separate linux/mod_devicetable.h from linux/platform_device.h
2018-12-29 1:32 ` NeilBrown
@ 2018-12-29 2:10 ` Randy Dunlap
2018-12-29 12:23 ` Greg Kroah-Hartman
1 sibling, 0 replies; 5+ messages in thread
From: Randy Dunlap @ 2018-12-29 2:10 UTC (permalink / raw)
To: NeilBrown, Greg Kroah-Hartman; +Cc: LKML, Andrew Morton, kbuild test robot
On 12/28/18 5:32 PM, NeilBrown wrote:
> On Sat, Jul 07 2018, Greg Kroah-Hartman wrote:
>
>> On Tue, Jun 19, 2018 at 10:47:28PM -0700, Randy Dunlap wrote:
>>> From: Randy Dunlap <rdunlap@infradead.org>
>>>
>>> At over 4000 #includes, <linux/platform_device.h> is the 9th most
>>> #included header file in the Linux kernel. It does not need
>>> <linux/mod_devicetable.h>, so drop that header and explicitly add
>>> <linux/mod_devicetable.h> to source files that need it.
>>>
>>> 4146 #include <linux/platform_device.h>
>>>
>>> After this patch, there are 225 files that use <linux/mod_devicetable.h>,
>>> for a reduction of around 3900 times that <linux/mod_devicetable.h>
>>> does not have to be read & parsed.
>>>
>>> 225 #include <linux/mod_devicetable.h>
>>>
>>> This patch was build-tested on 20 different arch-es.
>>>
>>> It also makes these drivers SubmitChecklist#1 compliant.
>>>
>>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>>> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
>>> Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
>>> ---
>>> v3: add fix for drivers/pinctrl/pinctrl-u300.c
>>> v2: add fixes for drivers/media/platform/vimc/
>>
>> I've queued this up now, let's see what else breaks! :)
>
> Some MIPS watchdog drivers break, at least.
>
> NeilBrown
>
> From: NeilBrown <neil@brown.name>
> Subject: [PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c
>
> These files need
> #include <linux/mod_devicetable.h>
> to compile correctly.
>
> Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
> Signed-off-by: NeilBrown <neil@brown.name>
Thanks, NeilBrown.
> ---
> drivers/watchdog/mt7621_wdt.c | 1 +
> drivers/watchdog/rt2880_wdt.c | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
> index 5c4a764717c4..81208cd3f4ec 100644
> --- a/drivers/watchdog/mt7621_wdt.c
> +++ b/drivers/watchdog/mt7621_wdt.c
> @@ -17,6 +17,7 @@
> #include <linux/watchdog.h>
> #include <linux/moduleparam.h>
> #include <linux/platform_device.h>
> +#include <linux/mod_devicetable.h>
>
> #include <asm/mach-ralink/ralink_regs.h>
>
> diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
> index 98967f0a7d10..db7c57d82cfd 100644
> --- a/drivers/watchdog/rt2880_wdt.c
> +++ b/drivers/watchdog/rt2880_wdt.c
> @@ -18,6 +18,7 @@
> #include <linux/watchdog.h>
> #include <linux/moduleparam.h>
> #include <linux/platform_device.h>
> +#include <linux/mod_devicetable.h>
>
> #include <asm/mach-ralink/ralink_regs.h>
>
>
--
~Randy
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 treewide] headers: separate linux/mod_devicetable.h from linux/platform_device.h
2018-12-29 1:32 ` NeilBrown
2018-12-29 2:10 ` Randy Dunlap
@ 2018-12-29 12:23 ` Greg Kroah-Hartman
1 sibling, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2018-12-29 12:23 UTC (permalink / raw)
To: NeilBrown; +Cc: Randy Dunlap, LKML, Andrew Morton, kbuild test robot
On Sat, Dec 29, 2018 at 12:32:30PM +1100, NeilBrown wrote:
> On Sat, Jul 07 2018, Greg Kroah-Hartman wrote:
>
> > On Tue, Jun 19, 2018 at 10:47:28PM -0700, Randy Dunlap wrote:
> >> From: Randy Dunlap <rdunlap@infradead.org>
> >>
> >> At over 4000 #includes, <linux/platform_device.h> is the 9th most
> >> #included header file in the Linux kernel. It does not need
> >> <linux/mod_devicetable.h>, so drop that header and explicitly add
> >> <linux/mod_devicetable.h> to source files that need it.
> >>
> >> 4146 #include <linux/platform_device.h>
> >>
> >> After this patch, there are 225 files that use <linux/mod_devicetable.h>,
> >> for a reduction of around 3900 times that <linux/mod_devicetable.h>
> >> does not have to be read & parsed.
> >>
> >> 225 #include <linux/mod_devicetable.h>
> >>
> >> This patch was build-tested on 20 different arch-es.
> >>
> >> It also makes these drivers SubmitChecklist#1 compliant.
> >>
> >> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> >> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
> >> Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
> >> ---
> >> v3: add fix for drivers/pinctrl/pinctrl-u300.c
> >> v2: add fixes for drivers/media/platform/vimc/
> >
> > I've queued this up now, let's see what else breaks! :)
>
> Some MIPS watchdog drivers break, at least.
>
> NeilBrown
>
> From: NeilBrown <neil@brown.name>
> Subject: [PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c
>
> These files need
> #include <linux/mod_devicetable.h>
> to compile correctly.
>
> Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
> Signed-off-by: NeilBrown <neil@brown.name>
> ---
> drivers/watchdog/mt7621_wdt.c | 1 +
> drivers/watchdog/rt2880_wdt.c | 1 +
> 2 files changed, 2 insertions(+)
Great, can you send these to the watchdog maintainer to queue up?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-12-29 12:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-06-20 5:47 [PATCH v3 treewide] headers: separate linux/mod_devicetable.h from linux/platform_device.h Randy Dunlap
2018-07-07 15:53 ` Greg Kroah-Hartman
2018-12-29 1:32 ` NeilBrown
2018-12-29 2:10 ` Randy Dunlap
2018-12-29 12:23 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox