[PATCH] USB: serial: simple: add Motorola Tetra driver for TPG2200

[PATCH] USB: serial: simple: add Motorola Tetra driver for TPG2200

[Max Schulze]

Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI
device

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0cad ProdID=9016 Rev=24.16
S:  Manufacturer=Motorola Solutions, Inc.
S:  Product=TETRA PEI interface
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple

Signed-off-by: Max Schulze <max.schulze@posteo.de>
Tested-by: Max Schulze <max.schulze@posteo.de>
---
 drivers/usb/serial/usb-serial-simple.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index 4d0273508043..edbbb13d6de6 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -85,7 +85,8 @@ DEVICE(moto_modem, MOTO_IDS);
 /* Motorola Tetra driver */
 #define MOTOROLA_TETRA_IDS()			\
 	{ USB_DEVICE(0x0cad, 0x9011) },	/* Motorola Solutions TETRA PEI */ \
-	{ USB_DEVICE(0x0cad, 0x9012) }	/* MTP6550 */
+	{ USB_DEVICE(0x0cad, 0x9012) },	/* MTP6550 */ \
+	{ USB_DEVICE(0x0cad, 0x9016) }	/* TPG2200 */
 DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
 
 /* Novatel Wireless GPS driver */
-- 
2.20.1

Re: [PATCH] USB: serial: simple: add Motorola Tetra driver for TPG2200

[Johan Hovold]

On Mon, Jan 07, 2019 at 08:31:49AM +0100, Max Schulze wrote:
> Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI
> device

I rephrased the summary and comment above since you're adding a new
device id to an existing driver (rather than a new driver).

> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=0cad ProdID=9016 Rev=24.16
> S:  Manufacturer=Motorola Solutions, Inc.
> S:  Product=TETRA PEI interface
> C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple
> 
> Signed-off-by: Max Schulze <max.schulze@posteo.de>
> Tested-by: Max Schulze <max.schulze@posteo.de>

And no need to add Tested-by for your own patches; submissions are
always supposed to be tested.

Applied for -rc2.

Thanks,
Johan