[PATCH v10 9/9] soc: qcom: rpmhpd: Mark mx as a parent for cx

Rajendra Nayak
2019-01-09T09:05:18Z

Specify the active + sleep and active-only MX power domains as
the parents of the corresponding CX power domains. This will ensure that
performance state requests on CX automatically generate equivalent requests
on MX power domains.

This is used to enforce a requirement that exists for various
hardware blocks on SDM845 that MX performance state >= CX performance
state for a given operating frequency.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/soc/qcom/rpmhpd.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index e45628694f09..4aadece0ac5a 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -97,12 +97,14 @@ static struct rpmhpd sdm845_cx_ao;
static struct rpmhpd sdm845_cx = {
.pd = { .name = "cx", },
.peer = &sdm845_cx_ao,
+ .parent = &sdm845_mx.pd,
.res_name = "cx.lvl",
};

static struct rpmhpd sdm845_cx_ao = {
.pd = { .name = "cx_ao", },
.peer = &sdm845_cx,
+ .parent = &sdm845_mx_ao.pd,
.res_name = "cx.lvl",
};

@@ -372,6 +374,15 @@ static int rpmhpd_probe(struct platform_device *pdev)
data->domains[i] = &rpmhpds[i]->pd;
}

+ /* Add subdomains */
+ for (i = 0; i < num_pds; i++) {
+ if (!rpmhpds[i])
+ continue;
+ if (rpmhpds[i]->parent)
+ pm_genpd_add_subdomain(rpmhpds[i]->parent,
+ &rpmhpds[i]->pd);
+ }
+
return of_genpd_add_provider_onecell(pdev->dev.of_node, data);
}