public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Nishad Kamdar <nishadkamdar@gmail.com>
To: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Alex Elder <elder@kernel.org>,
	Rui Miguel Silva <rmfrfs@gmail.com>,
	greybus-dev@lists.linaro.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org,
	Nishad Kamdar <nishadkamdar@gmail.com>
Subject: Re: [PATCH v5 3/3] staging: greybus: arche-platform: Switch to the gpio descriptor interface
Date: Sun, 13 Jan 2019 18:22:11 +0530	[thread overview]
Message-ID: <20190113125208.GA16542@nishad> (raw)
In-Reply-To: <20190111084821.GD3383@localhost>

On Fri, Jan 11, 2019 at 09:48:21AM +0100, Johan Hovold wrote:
> On Thu, Jan 10, 2019 at 11:23:07PM +0530, Nishad Kamdar wrote:
> > Use the gpiod interface instead of the deprecated old non-descriptor
> > interface while continuing to ignore gpio flags from device tree in
> > "svc_reset_onoff()" for now.
> > 
> > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> > ---
> > Changes in v5:
> >   - Change the commit message.
> >   - Restore the names of the gpio device-tree properties without
> >     the "-gpio" suffix.
> > Changes in v4:
> >  - Move 'gpio_desc *svc_sysboot' below the reset flag
> >    as it is more logical to have reset flag below
> >    reset gpio.
> >  - Remove a few unnecessary line breaks.
> > Changes in v3:
> >  - Add this patch to a patchset.
> > Changes in v2:
> >  - Move comment to the same line as to what it applies to.
> > ---
> 
> Also looks good. Some really minor comments to a couple of the error
> messages. The issues are there in the current code, but since you modify
> these messages anyway you might as well fix them up. Please fix that and
> resend with my
> 
> Reviewed-by: Johan Hovold <johan@kernel.org>
> 
Ok, I'll do that.

> Really good job with this!
> 
Thank you.
> > @@ -435,6 +428,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> >  	struct device *dev = &pdev->dev;
> >  	struct device_node *np = dev->of_node;
> >  	int ret;
> > +	unsigned int flags;
> >  
> >  	arche_pdata = devm_kzalloc(&pdev->dev, sizeof(*arche_pdata),
> >  				   GFP_KERNEL);
> > @@ -444,61 +438,33 @@ static int arche_platform_probe(struct platform_device *pdev)
> >  	/* setup svc reset gpio */
> >  	arche_pdata->is_reset_act_hi = of_property_read_bool(np,
> >  							     "svc,reset-active-high");
> > -	arche_pdata->svc_reset_gpio = of_get_named_gpio(np,
> > -							"svc,reset-gpio",
> > -							0);
> > -	if (!gpio_is_valid(arche_pdata->svc_reset_gpio)) {
> > -		dev_err(dev, "failed to get reset-gpio\n");
> > -		return arche_pdata->svc_reset_gpio;
> > -	}
> > -	ret = devm_gpio_request(dev, arche_pdata->svc_reset_gpio, "svc-reset");
> > -	if (ret) {
> > -		dev_err(dev, "failed to request svc-reset gpio:%d\n", ret);
> > -		return ret;
> > -	}
> > -	ret = gpio_direction_output(arche_pdata->svc_reset_gpio,
> > -				    arche_pdata->is_reset_act_hi);
> > -	if (ret) {
> > -		dev_err(dev, "failed to set svc-reset gpio dir:%d\n", ret);
> > +	if (arche_pdata->is_reset_act_hi)
> > +		flags = GPIOD_OUT_HIGH;
> > +	else
> > +		flags = GPIOD_OUT_LOW;
> > +
> > +	arche_pdata->svc_reset = devm_gpiod_get(dev, "svc,reset", flags);
> > +	if (IS_ERR(arche_pdata->svc_reset)) {
> > +		ret = PTR_ERR(arche_pdata->svc_reset);
> > +		dev_err(dev, "failed to request svc-reset GPIO:%d\n", ret);
> 
> Add a space after ':' for consistency.
> 
Ok. I'll do that.
> > @@ -515,19 +481,11 @@ static int arche_platform_probe(struct platform_device *pdev)
> >  	arche_pdata->num_apbs = of_get_child_count(np);
> >  	dev_dbg(dev, "Number of APB's available - %d\n", arche_pdata->num_apbs);
> >  
> > -	arche_pdata->wake_detect_gpio = of_get_named_gpio(np,
> > -							  "svc,wake-detect-gpio",
> > -							  0);
> > -	if (arche_pdata->wake_detect_gpio < 0) {
> > -		dev_err(dev, "failed to get wake detect gpio\n");
> > -		return arche_pdata->wake_detect_gpio;
> > -	}
> > -
> > -	ret = devm_gpio_request(dev, arche_pdata->wake_detect_gpio,
> > -				"wake detect");
> > -	if (ret) {
> > -		dev_err(dev, "Failed requesting wake_detect gpio %d\n",
> > -			arche_pdata->wake_detect_gpio);
> > +	arche_pdata->wake_detect = devm_gpiod_get(dev, "svc,wake-detect",
> > +						  GPIOD_IN);
> > +	if (IS_ERR(arche_pdata->wake_detect)) {
> > +		ret = PTR_ERR(arche_pdata->wake_detect);
> > +		dev_err(dev, "Failed requesting wake_detect GPIO %d\n", ret);
> 
> Add colon after "GPIO" for consistency (and to avoid ambiguity).
> 

Ok, I'll do that.

Thanks for the review,
Nishad
> >  		return ret;
> >  	}
> 
> Thanks,
> Johan

      reply	other threads:[~2019-01-13 12:52 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10 17:49 [PATCH v5 0/3] greybus: gpio: Switch to the gpio descriptor interface Nishad Kamdar
2019-01-10 17:50 ` [PATCH v5 1/3] staging: greybus: gpio: switch GPIO portions to use GPIOLIB_IRQCHIP Nishad Kamdar
2019-01-10 17:54   ` Nishad Kamdar
2019-01-11  8:36   ` Johan Hovold
2019-01-10 17:51 ` [PATCH v5 2/3] staging: greybus: arche-apb-ctrl.c: Switch to the gpio descriptor interface Nishad Kamdar
2019-01-11  8:41   ` Johan Hovold
2019-01-13 12:54     ` Nishad Kamdar
2019-01-10 17:53 ` [PATCH v5 3/3] staging: greybus: arche-platform: " Nishad Kamdar
2019-01-11  8:48   ` Johan Hovold
2019-01-13 12:52     ` Nishad Kamdar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190113125208.GA16542@nishad \
    --to=nishadkamdar@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=elder@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=greybus-dev@lists.linaro.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rmfrfs@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox