[PATCH 15/24] PCI: keystone: Invoke phy_reset API before enabling PHY

Kishon Vijay Abraham I
2019-01-14T13:27:04Z

SERDES connected to the PCIe controller in AM654 requires
power on reset enable (POR_EN) to be set in the SERDES. The
SERDES driver sets POR_EN in the reset ops and it has to be
invoked before init or enable ops. In order for SERDES driver
to set POR_EN, invoke phy_reset API in pci-keystone driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/controller/dwc/pci-keystone.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index c2873339809a..e2f4e7c01b5a 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -873,6 +873,10 @@ static int ks_pcie_enable_phy(struct keystone_pcie *ks_pcie)
int num_lanes = ks_pcie->num_lanes;

for (i = 0; i < num_lanes; i++) {
+ ret = phy_reset(ks_pcie->phy[i]);
+ if (ret < 0)
+ goto err_phy;
+
ret = phy_init(ks_pcie->phy[i]);
if (ret < 0)
goto err_phy;
--
2.17.1