From: Priit Laes <plaes@plaes.org>
To: "Jernej Škrabec" <jernej.skrabec@siol.net>
Cc: maxime.ripard@bootlin.com, wens@csie.org, robh+dt@kernel.org,
mturquette@baylibre.com, sboyd@kernel.org, airlied@linux.ie,
architt@codeaurora.org, a.hajda@samsung.com,
Laurent.pinchart@ideasonboard.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com
Subject: Re: [linux-sunxi] [PATCH v3 02/28] clk: sunxi-ng: Adjust MP clock parent rate when allowed
Date: Wed, 16 Jan 2019 12:09:58 +0000 [thread overview]
Message-ID: <20190116120958.gvxr6tpstvhjpe5a@plaes.org> (raw)
In-Reply-To: <2085880.8AFF3nNMGQ@jernej-laptop>
[-- Attachment #1: Type: text/plain, Size: 8641 bytes --]
On Thu, Jan 10, 2019 at 06:10:59PM +0100, Jernej Škrabec wrote:
> Dne četrtek, 10. januar 2019 ob 10:15:48 CET je Priit Laes napisal(a):
> > On Sun, Nov 04, 2018 at 07:26:39PM +0100, Jernej Skrabec wrote:
> > > Currently MP clocks don't consider adjusting parent rate even if they
> > > are allowed to do so. Such behaviour considerably lowers amount of
> > > possible rates, which is very inconvenient when such clock is used for
> > > pixel clock, for example.
> > >
> > > In order to improve the situation, adjusting parent rate is considered
> > > when allowed.
> > >
> > > This code is inspired by clk_divider_bestdiv() function, which does
> > > basically the same thing for different clock type.
> >
> > This patch seems to break the eMMC support on Olinuxino-Lime2-eMMC boards:
> >
> > EXT4-fs (mmcblk1p4): INFO: recovery required on readonly filesystem
> > EXT4-fs (mmcblk1p4): write access will be enabled during recovery
> > sunxi-mmc 1c11000.mmc: data error, sending stop command
> > sunxi-mmc 1c11000.mmc: send stop command failed
> >
>
> I'm not familiar with A20. What is interesting is that emmc clocks don't have
> CLK_SET_RATE_PARENT flag set, so you shouldn't see any difference.
>
> Can you post content of clk_summary with and without this patch?
In both cases I booted from FEL with rootfs on sdcard and tried to mount
partition from eMMC to /mnt. With your patch, last step it fails.
pre-patch working:
pll-ddr-other[768MHz] -> mmc2[512MHz]. (For some reason ahb-mmc2 is off?)
post-patch not working:
pll-periph[600MHz] -> mmc2[500Mhz], (ahb-mmc2 is enabled)
Also, attached the logs.
>
> Best regards,
> Jernej
>
> >
> > $ git bisect log
> > git bisect start
> > # good: [3df407b2a5346db1c48809706ece7a8616c79e0b] mmc: dw_mmc-bluefield:
> > simplify the probe() function git bisect good
> > 3df407b2a5346db1c48809706ece7a8616c79e0b
> > # bad: [00d59fde8532b2d42e80909d2e58678755e04da9] Merge tag 'mmc-v4.21' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc git bisect bad
> > 00d59fde8532b2d42e80909d2e58678755e04da9
> > # good: [01e421feec0817bb3141eaae4c517410d193d440] Merge branch 'fixes' into
> > next git bisect good 01e421feec0817bb3141eaae4c517410d193d440
> > # bad: [1eefdec18eded41833401cfd64749643ff72e7da] Merge branch
> > 'locking-core-for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip git bisect bad
> > 1eefdec18eded41833401cfd64749643ff72e7da
> > # good: [eaa76499711535fd64d747cc4ef0d78ab0fd41c6] Merge tag 'mtd/for-4.21'
> > of git://git.infradead.org/linux-mtd git bisect good
> > eaa76499711535fd64d747cc4ef0d78ab0fd41c6
> > # good: [4e4390ad067a61ce4e7607bd0df31f19a4caa36a] Merge tag
> > 'leds-for-4.21-rc1' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds git
> > bisect good 4e4390ad067a61ce4e7607bd0df31f19a4caa36a
> > # bad: [c2f1f3e0e17d94ab0c66d83e669492cb9e9a3698] Merge
> > git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next git bisect
> > bad c2f1f3e0e17d94ab0c66d83e669492cb9e9a3698
> > # bad: [e4b99d415c3908581d4703203e1e805f043a3e71] Merge branch
> > 'irq-core-for-linus' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip git bisect bad
> > e4b99d415c3908581d4703203e1e805f043a3e71
> > # bad: [ffe05540d18013db62c43627836a3638e9a2c7aa] Merge branches
> > 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and 'clk-rockchip'
> > into clk-next git bisect bad ffe05540d18013db62c43627836a3638e9a2c7aa
> > # good: [1a501c8defe950571316d5ddd917bf44f5ed7bd4] Merge branches
> > 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' and
> > 'clk-ops-const' into clk-next git bisect good
> > 1a501c8defe950571316d5ddd917bf44f5ed7bd4
> > # good: [e74581b79ddd9b49b8c61e2791fc4dffc0245afb] Merge tag
> > 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson into clk-meson
> > git bisect good e74581b79ddd9b49b8c61e2791fc4dffc0245afb
> > # good: [60baf75e3f5b76043c25328ac0c5320aaef5ea41] Merge tag
> > 'clk-renesas-for-v4.21-tag2' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into
> > clk-renesas git bisect good 60baf75e3f5b76043c25328ac0c5320aaef5ea41
> > # bad: [a41f85b6017ee20952a60e4330bcae2527fe2c2a] Merge tag
> > 'sunxi-clk-for-4.21' of
> > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> > clk-allwinner git bisect bad a41f85b6017ee20952a60e4330bcae2527fe2c2a
> > # bad: [ee678706e46d0d185c27cc214ad97828e0643159] clk: sunxi-ng: a64: Fix
> > gate bit of DSI DPHY git bisect bad
> > ee678706e46d0d185c27cc214ad97828e0643159
> > # bad: [65b6657672388b72822e0367f06d41c1e3ffb5bb] clk: sunxi-ng: Use u64 for
> > calculation of NM rate git bisect bad
> > 65b6657672388b72822e0367f06d41c1e3ffb5bb
> > # good: [db7548934603d9eda12649dff97ea5c29884405d] clk: sunxi-ng: sun50i:
> > h6: Fix MMC clock mux width git bisect good
> > db7548934603d9eda12649dff97ea5c29884405d
> > # bad: [3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15] clk: sunxi-ng: Adjust MP
> > clock parent rate when allowed git bisect bad
> > 3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15
> > # first bad commit: [3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15] clk:
> > sunxi-ng: Adjust MP clock parent rate when allowed
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > > ---
> > >
> > > drivers/clk/sunxi-ng/ccu_mp.c | 64 +++++++++++++++++++++++++++++++++--
> > > 1 file changed, 62 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
> > > index 5d0af4051737..0357349eb767 100644
> > > --- a/drivers/clk/sunxi-ng/ccu_mp.c
> > > +++ b/drivers/clk/sunxi-ng/ccu_mp.c
> > > @@ -40,6 +40,61 @@ static void ccu_mp_find_best(unsigned long parent,
> > > unsigned long rate,>
> > > *p = best_p;
> > >
> > > }
> > >
> > > +static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw,
> > > +
> unsigned long *parent,
> > > +
> unsigned long rate,
> > > +
> unsigned int max_m,
> > > +
> unsigned int max_p)
> > > +{
> > > + unsigned long parent_rate_saved;
> > > + unsigned long parent_rate, now;
> > > + unsigned long best_rate = 0;
> > > + unsigned int _m, _p, div;
> > > + unsigned long maxdiv;
> > > +
> > > + parent_rate_saved = *parent;
> > > +
> > > + /*
> > > + * The maximum divider we can use without overflowing
> > > + * unsigned long in rate * m * p below
> > > + */
> > > + maxdiv = max_m * max_p;
> > > + maxdiv = min(ULONG_MAX / rate, maxdiv);
> > > +
> > > + for (_p = 1; _p <= max_p; _p <<= 1) {
> > > + for (_m = 1; _m <= max_m; _m++) {
> > > + div = _m * _p;
> > > +
> > > + if (div > maxdiv)
> > > + break;
> > > +
> > > + if (rate * div == parent_rate_saved) {
> > > + /*
> > > + * It's the most ideal case if
> the requested
> > > + * rate can be divided from
> parent clock without
> > > + * needing to change parent rate,
> so return the
> > > + * divider immediately.
> > > + */
> > > + *parent = parent_rate_saved;
> > > + return rate;
> > > + }
> > > +
> > > + parent_rate = clk_hw_round_rate(hw, rate *
> div);
> > > + now = parent_rate / div;
> > > +
> > > + if (now <= rate && now > best_rate) {
> > > + best_rate = now;
> > > + *parent = parent_rate;
> > > +
> > > + if (now == rate)
> > > + return rate;
> > > + }
> > > + }
> > > + }
> > > +
> > > + return best_rate;
> > > +}
> > > +
> > >
> > > static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
> > >
> > > struct clk_hw *hw,
> > > unsigned long
> *parent_rate,
> > >
> > > @@ -56,8 +111,13 @@ static unsigned long ccu_mp_round_rate(struct
> > > ccu_mux_internal *mux,>
> > > max_m = cmp->m.max ?: 1 << cmp->m.width;
> > > max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
> > >
> > > - ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
> > > - rate = *parent_rate / p / m;
> > > + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
> > > + ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m,
> &p);
> > > + rate = *parent_rate / p / m;
> > > + } else {
> > > + rate = ccu_mp_find_best_with_parent_adj(hw, parent_rate,
> rate,
> > > +
> max_m, max_p);
> > > + }
> > >
> > > if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
> > >
> > > rate /= cmp->fixed_post_div;
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
[-- Attachment #2: pre-patch-clocks.log --]
[-- Type: text/plain, Size: 16826 bytes --]
enable prepare protect duty
clock count count count rate accuracy phase cycle
---------------------------------------------------------------------------------------------
gmac_int_tx 1 1 0 125000000 0 0 50000
gmac_tx 1 1 0 125000000 0 0 50000
mii_phy_tx 0 0 0 25000000 0 0 50000
osc32k 0 0 0 32768 0 0 50000
osc24M 2 2 1 24000000 0 0 50000
hosc 6 6 1 24000000 0 0 50000
out-b 0 0 0 32000 0 0 50000
out-a 0 0 0 32000 0 0 50000
hdmi1-slow 0 0 0 24000000 0 0 50000
avs 0 0 0 24000000 0 0 50000
csi1 0 0 0 24000000 0 0 50000
csi0 0 0 0 24000000 0 0 50000
spi3 0 0 0 24000000 0 0 50000
keypad 0 0 0 750000 0 0 50000
ir1 0 0 0 24000000 0 0 50000
ir0 0 0 0 24000000 0 0 50000
pata 0 0 0 24000000 0 0 50000
spi2 0 0 0 24000000 0 0 50000
spi1 0 0 0 24000000 0 0 50000
spi0 0 0 0 24000000 0 0 50000
ts 0 0 0 24000000 0 0 50000
mmc3 0 0 0 24000000 0 0 50000
mmc3_sample 0 0 0 24000000 0 180 50000
mmc3_output 0 0 0 24000000 0 180 50000
mmc1 0 0 0 24000000 0 0 50000
mmc1_sample 0 0 0 24000000 0 180 50000
mmc1_output 0 0 0 24000000 0 180 50000
ms 0 0 0 24000000 0 0 50000
nand 0 0 0 24000000 0 0 50000
apb1 3 3 0 24000000 0 0 50000
apb1-uart7 0 0 0 24000000 0 0 50000
apb1-uart6 0 0 0 24000000 0 0 50000
apb1-uart5 0 0 0 24000000 0 0 50000
apb1-uart4 0 0 0 24000000 0 0 50000
apb1-uart3 0 0 0 24000000 0 0 50000
apb1-uart2 0 0 0 24000000 0 0 50000
apb1-uart1 0 0 0 24000000 0 0 50000
apb1-uart0 1 1 0 24000000 0 0 50000
apb1-i2c4 0 0 0 24000000 0 0 50000
apb1-ps21 0 0 0 24000000 0 0 50000
apb1-ps20 0 0 0 24000000 0 0 50000
apb1-scr 0 0 0 24000000 0 0 50000
apb1-can 0 0 0 24000000 0 0 50000
apb1-i2c3 0 0 0 24000000 0 0 50000
apb1-i2c2 0 0 0 24000000 0 0 50000
apb1-i2c1 1 1 0 24000000 0 0 50000
apb1-i2c0 1 1 0 24000000 0 0 50000
pll-gpu 0 0 0 1200000000 0 0 50000
pll-video1 1 1 0 327000000 0 0 50000
pll-video1-2x 1 1 0 654000000 0 0 50000
hdmi-tmds 1 1 0 25153846 0 0 50000
hdmi-ddc 1 1 0 89835 0 0 50000
pll-periph-base 3 3 0 1200000000 0 0 50000
mbus 1 1 0 300000000 0 0 50000
pll-periph-sata 1 1 0 100000000 0 0 50000
sata 1 1 0 100000000 0 0 50000
pll-periph 5 5 0 600000000 0 0 50000
mmc0 0 0 0 50000000 0 0 50000
mmc0_sample 0 0 0 50000000 0 120 50000
mmc0_output 0 0 0 50000000 0 90 50000
ss 1 1 0 150000000 0 0 50000
usb-phy 3 3 0 600000000 0 0 50000
usb-ohci1 1 1 0 600000000 0 0 50000
usb-ohci0 1 1 0 600000000 0 0 50000
ahb 17 17 0 300000000 0 0 50000
ahb-gpu 0 0 0 300000000 0 0 50000
ahb-mp 0 0 0 300000000 0 0 50000
ahb-gmac 1 1 0 300000000 0 0 50000
ahb-de-fe1 0 0 0 300000000 0 0 50000
ahb-de-fe0 0 0 0 300000000 0 0 50000
ahb-de-be1 1 1 0 300000000 0 0 50000
ahb-de-be0 1 1 0 300000000 0 0 50000
ahb-hdmi1 0 0 0 300000000 0 0 50000
ahb-hdmi0 1 1 0 300000000 0 0 50000
ahb-csi1 0 0 0 300000000 0 0 50000
ahb-csi0 0 0 0 300000000 0 0 50000
ahb-lcd1 1 1 0 300000000 0 0 50000
ahb-lcd0 1 1 0 300000000 0 0 50000
ahb-tve1 0 0 0 300000000 0 0 50000
ahb-tve0 0 0 0 300000000 0 0 50000
ahb-tvd 0 0 0 300000000 0 0 50000
ahb-ve 0 0 0 300000000 0 0 50000
ahb-hstimer 2 2 0 300000000 0 0 50000
ahb-sata 1 1 0 300000000 0 0 50000
ahb-pata 0 0 0 300000000 0 0 50000
ahb-spi3 0 0 0 300000000 0 0 50000
ahb-spi2 0 0 0 300000000 0 0 50000
ahb-spi1 0 0 0 300000000 0 0 50000
ahb-spi0 0 0 0 300000000 0 0 50000
ahb-ts 0 0 0 300000000 0 0 50000
ahb-emac 0 0 0 300000000 0 0 50000
ahb-ace 0 0 0 300000000 0 0 50000
ahb-sdram 1 1 0 300000000 0 0 50000
ahb-nand 0 0 0 300000000 0 0 50000
ahb-ms 0 0 0 300000000 0 0 50000
ahb-mmc3 0 0 0 300000000 0 0 50000
ahb-mmc2 0 0 0 300000000 0 0 50000
ahb-mmc1 0 0 0 300000000 0 0 50000
ahb-mmc0 0 0 0 300000000 0 0 50000
ahb-bist 0 0 0 300000000 0 0 50000
ahb-dma 1 1 0 300000000 0 0 50000
ahb-ss 1 1 0 300000000 0 0 50000
ahb-ohci1 1 1 0 300000000 0 0 50000
ahb-ehci1 1 1 0 300000000 0 0 50000
ahb-ohci0 1 1 0 300000000 0 0 50000
ahb-ehci0 1 1 0 300000000 0 0 50000
ahb-otg 1 1 0 300000000 0 0 50000
apb0 1 1 0 150000000 0 0 50000
apb0-keypad 0 0 0 150000000 0 0 50000
apb0-i2s2 0 0 0 150000000 0 0 50000
apb0-ir1 0 0 0 150000000 0 0 50000
apb0-ir0 0 0 0 150000000 0 0 50000
apb0-pio 1 1 0 150000000 0 0 50000
apb0-i2s1 0 0 0 150000000 0 0 50000
apb0-ac97 0 0 0 150000000 0 0 50000
apb0-i2s0 0 0 0 150000000 0 0 50000
apb0-spdif 0 0 0 150000000 0 0 50000
apb0-codec 0 0 0 150000000 0 0 50000
pll-ddr-base 2 2 0 768000000 0 0 50000
pll-ddr-other 1 1 0 768000000 0 0 50000
mmc2 0 0 0 51200000 0 0 50000
mmc2_sample 0 0 0 51200000 0 120 50000
mmc2_output 0 0 0 51200000 0 72 50000
de-be0 1 1 0 256000000 0 0 50000
pll-ddr 4 4 0 384000000 0 0 50000
dram-ace 0 0 0 384000000 0 0 50000
dram-mp 0 0 0 384000000 0 0 50000
dram-de-be1 1 1 0 384000000 0 0 50000
dram-de-be0 1 1 0 384000000 0 0 50000
dram-de-fe0 0 0 0 384000000 0 0 50000
dram-de-fe1 0 0 0 384000000 0 0 50000
dram-out 1 1 0 384000000 0 0 50000
dram-tve1 0 0 0 384000000 0 0 50000
dram-tve0 0 0 0 384000000 0 0 50000
dram-tvd 0 0 0 384000000 0 0 50000
dram-ts 0 0 0 384000000 0 0 50000
dram-csi1 0 0 0 384000000 0 0 50000
dram-csi0 0 0 0 384000000 0 0 50000
dram-ve 0 0 0 384000000 0 0 50000
pll-ve 0 0 0 1200000000 0 0 50000
ace 0 0 0 1200000000 0 0 50000
ve 0 0 0 1200000000 0 0 50000
pll-video0 3 3 1 327000000 0 0 50000
hdmi1 0 0 0 327000000 0 0 50000
gpu 0 0 0 327000000 0 0 50000
hdmi 1 1 0 25153847 0 0 50000
tcon1-ch1-sclk2 0 0 0 327000000 0 0 50000
tcon1-ch1-sclk1 0 0 0 327000000 0 0 50000
tcon0-ch1-sclk2 1 1 1 25153847 0 0 50000
tcon0-ch1-sclk1 1 1 1 25153847 0 0 50000
tvd-sclk2 0 0 0 327000000 0 0 50000
tvd-sclk1 0 0 0 327000000 0 0 50000
csi-sclk 0 0 0 327000000 0 0 50000
tcon1-ch0-sclk 0 0 0 327000000 0 0 50000
tcon1-pixel-clock 0 0 0 327000000 0 0 50000
tcon0-ch0-sclk 0 0 0 327000000 0 0 50000
tcon0-pixel-clock 0 0 0 327000000 0 0 50000
de-mp 0 0 0 327000000 0 0 50000
de-fe1 0 0 0 327000000 0 0 50000
de-fe0 0 0 0 327000000 0 0 50000
de-be1 1 1 0 327000000 0 0 50000
pll-video0-2x 0 0 0 654000000 0 0 50000
pll-audio-base 0 0 0 1500000 0 0 50000
pll-audio-8x 0 0 0 3000000 0 0 50000
i2s2 0 0 0 3000000 0 0 50000
i2s1 0 0 0 3000000 0 0 50000
i2s0 0 0 0 3000000 0 0 50000
pll-audio-4x 0 0 0 1500000 0 0 50000
spdif 0 0 0 1500000 0 0 50000
pll-audio-2x 0 0 0 750000 0 0 50000
pll-audio 0 0 0 1500000 0 0 50000
codec 0 0 0 1500000 0 0 50000
ac97 0 0 0 1500000 0 0 50000
pll-core 1 1 0 960000000 0 0 50000
cpu 1 1 0 960000000 0 0 50000
axi 0 0 0 320000000 0 0 50000
[-- Attachment #3: post-patch-clocks.log --]
[-- Type: text/plain, Size: 16826 bytes --]
enable prepare protect duty
clock count count count rate accuracy phase cycle
---------------------------------------------------------------------------------------------
gmac_int_tx 1 1 0 125000000 0 0 50000
gmac_tx 1 1 0 125000000 0 0 50000
mii_phy_tx 0 0 0 25000000 0 0 50000
osc32k 0 0 0 32768 0 0 50000
osc24M 2 2 1 24000000 0 0 50000
hosc 6 6 1 24000000 0 0 50000
out-b 0 0 0 32000 0 0 50000
out-a 0 0 0 32000 0 0 50000
hdmi1-slow 0 0 0 24000000 0 0 50000
avs 0 0 0 24000000 0 0 50000
csi1 0 0 0 24000000 0 0 50000
csi0 0 0 0 24000000 0 0 50000
spi3 0 0 0 24000000 0 0 50000
keypad 0 0 0 750000 0 0 50000
ir1 0 0 0 24000000 0 0 50000
ir0 0 0 0 24000000 0 0 50000
pata 0 0 0 24000000 0 0 50000
spi2 0 0 0 24000000 0 0 50000
spi1 0 0 0 24000000 0 0 50000
spi0 0 0 0 24000000 0 0 50000
ts 0 0 0 24000000 0 0 50000
mmc3 0 0 0 24000000 0 0 50000
mmc3_sample 0 0 0 24000000 0 180 50000
mmc3_output 0 0 0 24000000 0 180 50000
mmc1 0 0 0 24000000 0 0 50000
mmc1_sample 0 0 0 24000000 0 180 50000
mmc1_output 0 0 0 24000000 0 180 50000
ms 0 0 0 24000000 0 0 50000
nand 0 0 0 24000000 0 0 50000
apb1 3 3 0 24000000 0 0 50000
apb1-uart7 0 0 0 24000000 0 0 50000
apb1-uart6 0 0 0 24000000 0 0 50000
apb1-uart5 0 0 0 24000000 0 0 50000
apb1-uart4 0 0 0 24000000 0 0 50000
apb1-uart3 0 0 0 24000000 0 0 50000
apb1-uart2 0 0 0 24000000 0 0 50000
apb1-uart1 0 0 0 24000000 0 0 50000
apb1-uart0 1 1 0 24000000 0 0 50000
apb1-i2c4 0 0 0 24000000 0 0 50000
apb1-ps21 0 0 0 24000000 0 0 50000
apb1-ps20 0 0 0 24000000 0 0 50000
apb1-scr 0 0 0 24000000 0 0 50000
apb1-can 0 0 0 24000000 0 0 50000
apb1-i2c3 0 0 0 24000000 0 0 50000
apb1-i2c2 0 0 0 24000000 0 0 50000
apb1-i2c1 1 1 0 24000000 0 0 50000
apb1-i2c0 1 1 0 24000000 0 0 50000
pll-gpu 0 0 0 1200000000 0 0 50000
pll-video1 1 1 0 327000000 0 0 50000
pll-video1-2x 1 1 0 654000000 0 0 50000
hdmi-tmds 1 1 0 25153846 0 0 50000
hdmi-ddc 1 1 0 89835 0 0 50000
pll-periph-base 3 3 0 1200000000 0 0 50000
mbus 1 1 0 300000000 0 0 50000
pll-periph-sata 1 1 0 100000000 0 0 50000
sata 1 1 0 100000000 0 0 50000
pll-periph 6 6 0 600000000 0 0 50000
mmc2 3 3 0 50000000 0 0 50000
mmc2_sample 1 1 0 50000000 0 120 50000
mmc2_output 1 1 0 50000000 0 60 50000
mmc0 0 0 0 50000000 0 0 50000
mmc0_sample 0 0 0 50000000 0 120 50000
mmc0_output 0 0 0 50000000 0 90 50000
ss 1 1 0 150000000 0 0 50000
usb-phy 3 3 0 600000000 0 0 50000
usb-ohci1 1 1 0 600000000 0 0 50000
usb-ohci0 1 1 0 600000000 0 0 50000
ahb 18 18 0 300000000 0 0 50000
ahb-gpu 0 0 0 300000000 0 0 50000
ahb-mp 0 0 0 300000000 0 0 50000
ahb-gmac 1 1 0 300000000 0 0 50000
ahb-de-fe1 0 0 0 300000000 0 0 50000
ahb-de-fe0 0 0 0 300000000 0 0 50000
ahb-de-be1 1 1 0 300000000 0 0 50000
ahb-de-be0 1 1 0 300000000 0 0 50000
ahb-hdmi1 0 0 0 300000000 0 0 50000
ahb-hdmi0 1 1 0 300000000 0 0 50000
ahb-csi1 0 0 0 300000000 0 0 50000
ahb-csi0 0 0 0 300000000 0 0 50000
ahb-lcd1 1 1 0 300000000 0 0 50000
ahb-lcd0 1 1 0 300000000 0 0 50000
ahb-tve1 0 0 0 300000000 0 0 50000
ahb-tve0 0 0 0 300000000 0 0 50000
ahb-tvd 0 0 0 300000000 0 0 50000
ahb-ve 0 0 0 300000000 0 0 50000
ahb-hstimer 2 2 0 300000000 0 0 50000
ahb-sata 1 1 0 300000000 0 0 50000
ahb-pata 0 0 0 300000000 0 0 50000
ahb-spi3 0 0 0 300000000 0 0 50000
ahb-spi2 0 0 0 300000000 0 0 50000
ahb-spi1 0 0 0 300000000 0 0 50000
ahb-spi0 0 0 0 300000000 0 0 50000
ahb-ts 0 0 0 300000000 0 0 50000
ahb-emac 0 0 0 300000000 0 0 50000
ahb-ace 0 0 0 300000000 0 0 50000
ahb-sdram 1 1 0 300000000 0 0 50000
ahb-nand 0 0 0 300000000 0 0 50000
ahb-ms 0 0 0 300000000 0 0 50000
ahb-mmc3 0 0 0 300000000 0 0 50000
ahb-mmc2 1 1 0 300000000 0 0 50000
ahb-mmc1 0 0 0 300000000 0 0 50000
ahb-mmc0 0 0 0 300000000 0 0 50000
ahb-bist 0 0 0 300000000 0 0 50000
ahb-dma 1 1 0 300000000 0 0 50000
ahb-ss 1 1 0 300000000 0 0 50000
ahb-ohci1 1 1 0 300000000 0 0 50000
ahb-ehci1 1 1 0 300000000 0 0 50000
ahb-ohci0 1 1 0 300000000 0 0 50000
ahb-ehci0 1 1 0 300000000 0 0 50000
ahb-otg 1 1 0 300000000 0 0 50000
apb0 1 1 0 150000000 0 0 50000
apb0-keypad 0 0 0 150000000 0 0 50000
apb0-i2s2 0 0 0 150000000 0 0 50000
apb0-ir1 0 0 0 150000000 0 0 50000
apb0-ir0 0 0 0 150000000 0 0 50000
apb0-pio 1 1 0 150000000 0 0 50000
apb0-i2s1 0 0 0 150000000 0 0 50000
apb0-ac97 0 0 0 150000000 0 0 50000
apb0-i2s0 0 0 0 150000000 0 0 50000
apb0-spdif 0 0 0 150000000 0 0 50000
apb0-codec 0 0 0 150000000 0 0 50000
pll-ddr-base 2 2 0 768000000 0 0 50000
pll-ddr-other 1 1 0 768000000 0 0 50000
de-be0 1 1 0 256000000 0 0 50000
pll-ddr 4 4 0 384000000 0 0 50000
dram-ace 0 0 0 384000000 0 0 50000
dram-mp 0 0 0 384000000 0 0 50000
dram-de-be1 1 1 0 384000000 0 0 50000
dram-de-be0 1 1 0 384000000 0 0 50000
dram-de-fe0 0 0 0 384000000 0 0 50000
dram-de-fe1 0 0 0 384000000 0 0 50000
dram-out 1 1 0 384000000 0 0 50000
dram-tve1 0 0 0 384000000 0 0 50000
dram-tve0 0 0 0 384000000 0 0 50000
dram-tvd 0 0 0 384000000 0 0 50000
dram-ts 0 0 0 384000000 0 0 50000
dram-csi1 0 0 0 384000000 0 0 50000
dram-csi0 0 0 0 384000000 0 0 50000
dram-ve 0 0 0 384000000 0 0 50000
pll-ve 0 0 0 1200000000 0 0 50000
ace 0 0 0 1200000000 0 0 50000
ve 0 0 0 1200000000 0 0 50000
pll-video0 3 3 1 327000000 0 0 50000
hdmi1 0 0 0 327000000 0 0 50000
gpu 0 0 0 327000000 0 0 50000
hdmi 1 1 0 25153847 0 0 50000
tcon1-ch1-sclk2 0 0 0 327000000 0 0 50000
tcon1-ch1-sclk1 0 0 0 327000000 0 0 50000
tcon0-ch1-sclk2 1 1 1 25153847 0 0 50000
tcon0-ch1-sclk1 1 1 1 25153847 0 0 50000
tvd-sclk2 0 0 0 327000000 0 0 50000
tvd-sclk1 0 0 0 327000000 0 0 50000
csi-sclk 0 0 0 327000000 0 0 50000
tcon1-ch0-sclk 0 0 0 327000000 0 0 50000
tcon1-pixel-clock 0 0 0 327000000 0 0 50000
tcon0-ch0-sclk 0 0 0 327000000 0 0 50000
tcon0-pixel-clock 0 0 0 327000000 0 0 50000
de-mp 0 0 0 327000000 0 0 50000
de-fe1 0 0 0 327000000 0 0 50000
de-fe0 0 0 0 327000000 0 0 50000
de-be1 1 1 0 327000000 0 0 50000
pll-video0-2x 0 0 0 654000000 0 0 50000
pll-audio-base 0 0 0 1500000 0 0 50000
pll-audio-8x 0 0 0 3000000 0 0 50000
i2s2 0 0 0 3000000 0 0 50000
i2s1 0 0 0 3000000 0 0 50000
i2s0 0 0 0 3000000 0 0 50000
pll-audio-4x 0 0 0 1500000 0 0 50000
spdif 0 0 0 1500000 0 0 50000
pll-audio-2x 0 0 0 750000 0 0 50000
pll-audio 0 0 0 1500000 0 0 50000
codec 0 0 0 1500000 0 0 50000
ac97 0 0 0 1500000 0 0 50000
pll-core 1 1 0 960000000 0 0 50000
cpu 1 1 0 960000000 0 0 50000
axi 0 0 0 320000000 0 0 50000
next prev parent reply other threads:[~2019-01-16 12:10 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-04 18:26 [PATCH v3 00/28] Allwinner H6 DE3 and HDMI support Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 01/28] dt-bindings: bus: add H6 DE3 bus binding Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 02/28] clk: sunxi-ng: Adjust MP clock parent rate when allowed Jernej Skrabec
2019-01-10 9:15 ` [linux-sunxi] " Priit Laes
2019-01-10 17:10 ` Jernej Škrabec
2019-01-16 12:09 ` Priit Laes [this message]
2019-01-16 17:00 ` Jernej Škrabec
2019-01-17 7:24 ` Priit Laes
2019-01-18 21:51 ` Jernej Škrabec
2019-01-21 8:37 ` Priit Laes
2019-01-21 13:34 ` Priit Laes
2019-01-21 18:13 ` Jernej Škrabec
2019-03-19 10:34 ` Priit Laes
2018-11-04 18:26 ` [PATCH v3 03/28] clk: sunxi-ng: Use u64 for calculation of NM rate Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 04/28] clk: sunxi-ng: h6: Set video PLLs limits Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 05/28] dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 06/28] clk: sunxi-ng: Add support for H6 DE3 clocks Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 07/28] dt-bindings: display: sun4i-drm: Add H6 display engine compatibles Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 08/28] drm/sun4i: Add compatible for H6 display engine Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 09/28] drm/sun4i: Rework DE2 register defines Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 10/28] drm/sun4i: Fix DE2 mixer size Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 11/28] drm/sun4i: Disable unused DE2 sub-engines Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 12/28] drm/sun4i: Add basic support for DE3 Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 13/28] drm/sun4i: Add support for H6 DE3 mixer 0 Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 14/28] drm/bridge/synopsys: dw-hdmi: Enable workaround for v2.12a Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 15/28] drm/sun4i: Not all DW HDMI controllers has scrambled addresses Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 16/28] drm/sun4i: dw-hdmi: Make mode_valid function configurable Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 17/28] drm/sun4i: dw-hdmi: Add quirk for setting TMDS clock Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 18/28] dt-bindings: display: sunxi: add DT binding for Allwinner H6 DW HDMI Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 19/28] drm/sun4i: Add support for H6 DW HDMI controller Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 20/28] drm/sun4i: dw-hdmi-phy: Reorder quirks by family Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 21/28] drm/sun4i: Add support for Synopsys HDMI PHY Jernej Skrabec
2018-11-04 18:26 ` [PATCH v3 22/28] drm/sun4i: Add support for H6 " Jernej Skrabec
2018-11-04 18:27 ` [PATCH v3 23/28] drm/sun4i: Initialize registers in tcon-top driver Jernej Skrabec
2018-11-04 18:27 ` [PATCH v3 24/28] drm: sun4i: add quirks for TCON TOP Jernej Skrabec
2018-11-04 18:27 ` [PATCH v3 25/28] dt-bindings: display: sun4i-drm: document H6 " Jernej Skrabec
2018-11-04 18:27 ` [PATCH v3 26/28] drm: sun4i: add support for " Jernej Skrabec
2018-11-04 18:27 ` [PATCH v3 27/28] arm64: dts: allwinner: h6: Add HDMI pipeline Jernej Skrabec
2018-11-04 18:27 ` [PATCH v3 28/28] arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board Jernej Skrabec
2018-11-05 9:43 ` [PATCH v3 00/28] Allwinner H6 DE3 and HDMI support Maxime Ripard
2018-11-06 15:54 ` Jernej Škrabec
2018-11-06 17:20 ` Jernej Škrabec
2018-11-07 9:44 ` Maxime Ripard
2018-12-03 18:09 ` Jernej Škrabec
2018-12-04 8:29 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116120958.gvxr6tpstvhjpe5a@plaes.org \
--to=plaes@plaes.org \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=architt@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox