linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chao Fan <fanc.fnst@cn.fujitsu.com>
To: Kairui Song <kasong@redhat.com>
Cc: <linux-kernel@vger.kernel.org>, <x86@kernel.org>,
	Borislav Petkov <bp@alien8.de>, <tglx@linutronix.de>,
	<mingo@redhat.com>, <hpa@zytor.com>, <keescook@chromium.org>,
	Baoquan He <bhe@redhat.com>, <msys.mizuma@gmail.com>,
	<indou.takao@jp.fujitsu.com>, <caoj.fnst@cn.fujitsu.com>
Subject: Re: [PATCH v15 5/6] x86/boot: Parse SRAT address from RSDP and store immovable memory
Date: Thu, 17 Jan 2019 15:57:30 +0800	[thread overview]
Message-ID: <20190117075729.GC31097@localhost.localdomain> (raw)
In-Reply-To: <20190117062451.GA588@localhost.localdomain>

On Wed, Jan 16, 2019 at 03:28:52PM +0800, Kairui Song wrote:
>On Mon, Jan 7, 2019 at 11:24 AM Chao Fan <fanc.fnst@cn.fujitsu.com> wrote:
>>
>> +
>> +/* Determine RSDP, based on acpi_os_get_root_pointer(). */
>> +static acpi_physical_address get_rsdp_addr(void)
>> +{
>> +       acpi_physical_address pa;
>> +
>> +       pa = get_acpi_rsdp();
>> +
>> +       if (!pa)
>> +               pa = efi_get_rsdp_addr();
>> +
>> +       if (!pa)
>> +               pa = bios_get_rsdp_addr();
>> +
>> +       return pa;
>> +}
>
>acpi_rsdp might be provided by boot_params.acpi_rsdp_addr too,
>it's introduced in ae7e1238e68f2a for Xen PVH guest and later move to
>boot_params in e6e094e053af,
>kexec could use it to pass RSDP to second kernel as well. Please check
>it as well make sure it always works.
>

Hi Kairui,

I saw the parsing code has been added to kernel, but I didn't see
where to fill in the 'acpi_rsdp_addr'. If only you(KEXEC) use it,
I can add "#ifdef CONFIG_KEXEC", but you said Xen will use it also,
so I didn't add ifdef to control it. I was trying to do as below:

static inline acpi_physical_address get_boot_params_rsdp(void)
{
        return boot_params->acpi_rsdp_addr;
}

static acpi_physical_address get_rsdp_addr(void)
{
	bool boot_params_rsdp_exist;
        acpi_physical_address pa;

        pa = get_acpi_rsdp();

        if (!pa)
                pa = get_boot_params_rsdp();

        if (!pa) {
                pa = efi_get_rsdp_addr();
		boot_params_rsdp_exist = false;
	}
	else
		boot_params_rsdp_exist = true;

        if (!pa)
                pa = bios_get_rsdp_addr();

	if (pa && !boot_params_rsdp_exist)
		boot_params.acpi_rsdp_addr = pa;

        return pa;
}

At the same time, I notice kernel only parses it when
"#ifdef CONFIG_ACPI", we should keep sync with kernel, but I think
we are parsing SRAT, CONFIG_ACPI is needed sure, so I am going to
update the define of EARLY_SRAT_PARSE:

config EARLY_SRAT_PARSE
        bool "EARLY SRAT parsing"
        def_bool y
        depends on RANDOMIZE_BASE && MEMORY_HOTREMOVE && ACPI

Boris, how do you think the update for the new acpi_rsdp_addr?
If I misunderstand something, please let me know.

Thanks,
Chao Fan

>> +
>> +/* Compute SRAT address from RSDP. */
>> +static struct acpi_table_header *get_acpi_srat_table(void)
>> +{
>> +       acpi_physical_address acpi_table;
>> +       acpi_physical_address root_table;
>> +       struct acpi_table_header *header;
>> +       struct acpi_table_rsdp *rsdp;
>> +       u32 num_entries;
>> +       char arg[10];
>> +       u8 *entry;
>> +       u32 size;
>> +       u32 len;
>> +
>> +       rsdp = (struct acpi_table_rsdp *)(long)get_rsdp_addr();
>> +       if (!rsdp)
>> +               return NULL;
>> +
>> +       /* Get RSDT or XSDT from RSDP. */
>> +       if (!(cmdline_find_option("acpi", arg, sizeof(arg)) == 4 &&
>> +           !strncmp(arg, "rsdt", 4)) &&
>> +           rsdp->xsdt_physical_address &&
>> +           rsdp->revision > 1) {
>> +               root_table = rsdp->xsdt_physical_address;
>> +               size = ACPI_XSDT_ENTRY_SIZE;
>> +       } else {
>> +               root_table = rsdp->rsdt_physical_address;
>> +               size = ACPI_RSDT_ENTRY_SIZE;
>> +       }
>> +
>> +       /* Get ACPI root table from RSDT or XSDT.*/
>> +       if (!root_table)
>> +               return NULL;
>> +       header = (struct acpi_table_header *)(long)root_table;
>> +
>> +       len = header->length;
>> +       if (len < sizeof(struct acpi_table_header) + size)
>> +               return NULL;
>> +
>> +       num_entries = (u32)((len - sizeof(struct acpi_table_header)) / size);
>> +       entry = ACPI_ADD_PTR(u8, header, sizeof(struct acpi_table_header));
>> +
>> +       while (num_entries--) {
>> +               u64 address64;
>> +
>> +               if (size == ACPI_RSDT_ENTRY_SIZE)
>> +                       acpi_table =  *ACPI_CAST_PTR(u32, entry);
>> +               else {
>> +                       address64 = *(u64 *)entry;
>> +                       acpi_table = address64;
>> +               }
>> +
>> +               if (acpi_table) {
>> +                       header = (struct acpi_table_header *)(long)acpi_table;
>> +
>> +                       if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_SRAT))
>> +                               return header;
>> +               }
>> +               entry += size;
>> +       }
>> +       return NULL;
>> +}
>> +
>> +/*
>> + * According to ACPI table, filter the immovable memory regions
>> + * and store them in immovable_mem[].
>> + */
>> +void get_immovable_mem(void)
>> +{
>> +       struct acpi_table_header *table_header;
>> +       struct acpi_subtable_header *table;
>> +       struct acpi_srat_mem_affinity *ma;
>> +       char arg[MAX_ACPI_ARG_LENGTH];
>> +       unsigned long table_end;
>> +       int i = 0;
>> +
>> +       if (cmdline_find_option("acpi", arg, sizeof(arg)) == 3 &&
>> +           !strncmp(arg, "off", 3))
>> +               return;
>> +
>> +       table_header = get_acpi_srat_table();
>> +       if (!table_header)
>> +               return;
>> +
>> +       table_end = (unsigned long)table_header + table_header->length;
>> +       table = (struct acpi_subtable_header *)
>> +               ((unsigned long)table_header + sizeof(struct acpi_table_srat));
>> +
>> +       while (((unsigned long)table) +
>> +                      sizeof(struct acpi_subtable_header) < table_end) {
>> +               if (table->type == ACPI_SRAT_TYPE_MEMORY_AFFINITY) {
>> +                       ma = (struct acpi_srat_mem_affinity *)table;
>> +                       if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) {
>> +                               immovable_mem[i].start = ma->base_address;
>> +                               immovable_mem[i].size = ma->length;
>> +                               i++;
>> +                       }
>> +
>> +                       if (i >= MAX_NUMNODES*2) {
>> +                               debug_putstr("Too many immovable memory regions, aborting.\n");
>> +                               return;
>> +                       }
>> +               }
>> +               table = (struct acpi_subtable_header *)
>> +                       ((unsigned long)table + table->length);
>> +       }
>> +       num_immovable_mem = i;
>> +}
>> diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
>> index 9ed9709d9947..b251572e77af 100644
>> --- a/arch/x86/boot/compressed/kaslr.c
>> +++ b/arch/x86/boot/compressed/kaslr.c
>> @@ -87,10 +87,6 @@ static unsigned long get_boot_seed(void)
>>  #define KASLR_COMPRESSED_BOOT
>>  #include "../../lib/kaslr.c"
>>
>> -struct mem_vector {
>> -       unsigned long long start;
>> -       unsigned long long size;
>> -};
>>
>>  /* Only supporting at most 4 unusable memmap regions with kaslr */
>>  #define MAX_MEMMAP_REGIONS     4
>> diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
>> index a1d5918765f3..b49748366a5b 100644
>> --- a/arch/x86/boot/compressed/misc.h
>> +++ b/arch/x86/boot/compressed/misc.h
>> @@ -77,6 +77,11 @@ void choose_random_location(unsigned long input,
>>                             unsigned long *output,
>>                             unsigned long output_size,
>>                             unsigned long *virt_addr);
>> +struct mem_vector {
>> +       unsigned long long start;
>> +       unsigned long long size;
>> +};
>> +
>>  /* cpuflags.c */
>>  bool has_cpuflag(int flag);
>>  #else
>> @@ -116,3 +121,17 @@ static inline void console_init(void)
>>  void set_sev_encryption_mask(void);
>>
>>  #endif
>> +
>> +/* acpi.c */
>> +#ifdef CONFIG_RANDOMIZE_BASE
>> +/* Amount of immovable memory regions */
>> +int num_immovable_mem;
>> +#endif
>> +
>> +#ifdef CONFIG_EARLY_SRAT_PARSE
>> +void get_immovable_mem(void);
>> +#else
>> +static void get_immovable_mem(void)
>> +{
>> +}
>> +#endif
>> --
>> 2.20.1
>>
>>
>>
>
>
>-- 
>Best Regards,
>Kairui Song
>
>



  parent reply	other threads:[~2019-01-17  7:58 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-07  3:22 [PATCH v15 0/6] x86/boot/KASLR: Parse ACPI table and limit KASLR to choosing immovable memory Chao Fan
2019-01-07  3:22 ` [PATCH v15 1/6] x86/boot: Copy kstrtoull() to boot/string.c instead of using simple_strtoull() Chao Fan
2019-01-09 12:48   ` Borislav Petkov
2019-01-10  1:15     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 2/6] x86/boot: Introduce get_acpi_rsdp() to parse RSDP in cmdline from KEXEC Chao Fan
2019-01-10 17:01   ` Borislav Petkov
2019-01-11  1:17     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 3/6] x86/boot: Introduce efi_get_rsdp_addr() to find RSDP from EFI table Chao Fan
2019-01-10 21:15   ` Borislav Petkov
2019-01-11  1:23     ` Chao Fan
2019-01-11 10:32       ` Borislav Petkov
2019-01-13  9:47         ` Chao Fan
2019-01-13 11:05           ` Borislav Petkov
2019-01-14  1:26             ` Chao Fan
2019-01-14  9:07               ` Borislav Petkov
2019-01-15  7:21                 ` Chao Fan
2019-01-15  9:55                   ` Borislav Petkov
2019-01-16  3:26                     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 4/6] x86/boot: Introduce bios_get_rsdp_addr() to search RSDP in memory Chao Fan
2019-01-10 21:27   ` Borislav Petkov
2019-01-11  1:27     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 5/6] x86/boot: Parse SRAT address from RSDP and store immovable memory Chao Fan
2019-01-16  7:28   ` Kairui Song
2019-01-17  1:42     ` Chao Fan
     [not found]     ` <20190117062451.GA588@localhost.localdomain>
2019-01-17  7:57       ` Chao Fan [this message]
2019-01-17  8:22         ` Kairui Song
2019-01-17  9:06           ` Juergen Gross
2019-01-16 11:01   ` Borislav Petkov
2019-01-17  1:16     ` Chao Fan
2019-01-17  3:20     ` Chao Fan
2019-01-17 15:27       ` Borislav Petkov
2019-01-18  1:14         ` Chao Fan
2019-01-21  9:33     ` Chao Fan
2019-01-21  9:42       ` Chao Fan
2019-01-21  9:45         ` Borislav Petkov
2019-01-21  9:51           ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 6/6] x86/boot/KASLR: Limit KASLR to extracting kernel in " Chao Fan
2019-01-16 11:15   ` Borislav Petkov
2019-01-17  1:25     ` Chao Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190117075729.GC31097@localhost.localdomain \
    --to=fanc.fnst@cn.fujitsu.com \
    --cc=bhe@redhat.com \
    --cc=bp@alien8.de \
    --cc=caoj.fnst@cn.fujitsu.com \
    --cc=hpa@zytor.com \
    --cc=indou.takao@jp.fujitsu.com \
    --cc=kasong@redhat.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=msys.mizuma@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).