[PATCH 1/1] doc: pinctrl: fix bad reference to pinctrl.txt file

[PATCH 1/1] doc: pinctrl: fix bad reference to pinctrl.txt file

[Otto Sabart]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

The pinctrl.txt file was converted into reStructuredText and moved into
driver-api folder. This patch updates the broken reference.

Fixes: 5a9b73832e9e ("pinctrl.txt: move it to the driver-api book")
Signed-off-by: Otto Sabart <ottosabart@seberm.com>
---
 include/linux/mfd/madera/pdata.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
index 8dc852402dbb..dd00ab824e5b 100644
--- a/include/linux/mfd/madera/pdata.h
+++ b/include/linux/mfd/madera/pdata.h
@@ -34,7 +34,8 @@ struct madera_codec_pdata;
  * @micvdd:	    Substruct of pdata for the MICVDD regulator
  * @irq_flags:	    Mode for primary IRQ (defaults to active low)
  * @gpio_base:	    Base GPIO number
- * @gpio_configs:   Array of GPIO configurations (See Documentation/pinctrl.txt)
+ * @gpio_configs:   Array of GPIO configurations (See
+ *		    Documentation/driver-api/pinctl.rst)
  * @n_gpio_configs: Number of entries in gpio_configs
  * @gpsw:	    General purpose switch mode setting. Depends on the external
  *		    hardware connected to the switch. (See the SW1_MODE field
-- 
2.17.2


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/1] doc: pinctrl: fix bad reference to pinctrl.txt file

[Richard Fitzgerald]

On 09/01/19 19:06, Otto Sabart wrote:
> The pinctrl.txt file was converted into reStructuredText and moved into
> driver-api folder. This patch updates the broken reference.
> 
> Fixes: 5a9b73832e9e ("pinctrl.txt: move it to the driver-api book")
> Signed-off-by: Otto Sabart <ottosabart@seberm.com>
> ---
>   include/linux/mfd/madera/pdata.h | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
> index 8dc852402dbb..dd00ab824e5b 100644
> --- a/include/linux/mfd/madera/pdata.h
> +++ b/include/linux/mfd/madera/pdata.h
> @@ -34,7 +34,8 @@ struct madera_codec_pdata;
>    * @micvdd:	    Substruct of pdata for the MICVDD regulator
>    * @irq_flags:	    Mode for primary IRQ (defaults to active low)
>    * @gpio_base:	    Base GPIO number
> - * @gpio_configs:   Array of GPIO configurations (See Documentation/pinctrl.txt)
> + * @gpio_configs:   Array of GPIO configurations (See
> + *		    Documentation/driver-api/pinctl.rst)
>    * @n_gpio_configs: Number of entries in gpio_configs
>    * @gpsw:	    General purpose switch mode setting. Depends on the external
>    *		    hardware connected to the switch. (See the SW1_MODE field
> 

Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>

Re: [PATCH 1/1] doc: pinctrl: fix bad reference to pinctrl.txt file

[Charles Keepax]

On Wed, Jan 09, 2019 at 08:06:54PM +0100, Otto Sabart wrote:
> The pinctrl.txt file was converted into reStructuredText and moved into
> driver-api folder. This patch updates the broken reference.
> 
> Fixes: 5a9b73832e9e ("pinctrl.txt: move it to the driver-api book")
> Signed-off-by: Otto Sabart <ottosabart@seberm.com>
> ---

Just noticed you don't have any maintainers on this email. You
really need to add Lee Jones in the to field, he is the guy would
would apply the patch.

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>

Thanks,
Charles

>  include/linux/mfd/madera/pdata.h | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
> index 8dc852402dbb..dd00ab824e5b 100644
> --- a/include/linux/mfd/madera/pdata.h
> +++ b/include/linux/mfd/madera/pdata.h
> @@ -34,7 +34,8 @@ struct madera_codec_pdata;
>   * @micvdd:	    Substruct of pdata for the MICVDD regulator
>   * @irq_flags:	    Mode for primary IRQ (defaults to active low)
>   * @gpio_base:	    Base GPIO number
> - * @gpio_configs:   Array of GPIO configurations (See Documentation/pinctrl.txt)
> + * @gpio_configs:   Array of GPIO configurations (See
> + *		    Documentation/driver-api/pinctl.rst)
>   * @n_gpio_configs: Number of entries in gpio_configs
>   * @gpsw:	    General purpose switch mode setting. Depends on the external
>   *		    hardware connected to the switch. (See the SW1_MODE field
> -- 
> 2.17.2
>