public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>, JC Kuo <jckuo@nvidia.com>,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] phy: tegra: xusb: Add support for power supplies
Date: Fri, 25 Jan 2019 12:25:24 +0100	[thread overview]
Message-ID: <20190125112525.10697-4-thierry.reding@gmail.com> (raw)
In-Reply-To: <20190125112525.10697-1-thierry.reding@gmail.com>

From: Thierry Reding <treding@nvidia.com>

Support enabling various supplies needed to provide power to the PLLs
and logic used to drive the USB, PCI and SATA pads.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/phy/tegra/xusb.c | 34 +++++++++++++++++++++++++++++++++-
 drivers/phy/tegra/xusb.h |  5 +++++
 2 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 57a2d08ef6da..e510629f4f1c 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -864,6 +864,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 	struct tegra_xusb_padctl *padctl;
 	const struct of_device_id *match;
 	struct resource *res;
+	unsigned int i;
 	int err;
 
 	/* for backwards compatibility with old device trees */
@@ -901,14 +902,38 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 		goto remove;
 	}
 
+	padctl->supplies = devm_kcalloc(&pdev->dev, padctl->soc->num_supplies,
+					sizeof(*padctl->supplies), GFP_KERNEL);
+	if (!padctl->supplies) {
+		err = -ENOMEM;
+		goto remove;
+	}
+
+	for (i = 0; i < padctl->soc->num_supplies; i++)
+		padctl->supplies[i].supply = padctl->soc->supply_names[i];
+
+	err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
+				      padctl->supplies);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
+		goto remove;
+	}
+
 	err = reset_control_deassert(padctl->rst);
 	if (err < 0)
 		goto remove;
 
+	err = regulator_bulk_enable(padctl->soc->num_supplies,
+				    padctl->supplies);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable supplies: %d\n", err);
+		goto reset;
+	}
+
 	err = tegra_xusb_setup_pads(padctl);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to setup pads: %d\n", err);
-		goto reset;
+		goto power_down;
 	}
 
 	err = tegra_xusb_setup_ports(padctl);
@@ -921,6 +946,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 
 remove_pads:
 	tegra_xusb_remove_pads(padctl);
+power_down:
+	regulator_bulk_disable(padctl->soc->num_supplies, padctl->supplies);
 reset:
 	reset_control_assert(padctl->rst);
 remove:
@@ -936,6 +963,11 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
 	tegra_xusb_remove_ports(padctl);
 	tegra_xusb_remove_pads(padctl);
 
+	err = regulator_bulk_disable(padctl->soc->num_supplies,
+				     padctl->supplies);
+	if (err < 0)
+		dev_err(&pdev->dev, "failed to disable supplies: %d\n", err);
+
 	err = reset_control_assert(padctl->rst);
 	if (err < 0)
 		dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index bb60fc09c752..5d5d22f6cb41 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -370,6 +370,9 @@ struct tegra_xusb_padctl_soc {
 	} ports;
 
 	const struct tegra_xusb_padctl_ops *ops;
+
+	const char * const *supply_names;
+	unsigned int num_supplies;
 };
 
 struct tegra_xusb_padctl {
@@ -393,6 +396,8 @@ struct tegra_xusb_padctl {
 	unsigned int enable;
 
 	struct clk *clk;
+
+	struct regulator_bulk_data *supplies;
 };
 
 static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,
-- 
2.19.1


  parent reply	other threads:[~2019-01-25 11:25 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-25 11:25 [PATCH 1/5] dt-bindings: phy: tegra: Add Tegra186 support Thierry Reding
2019-01-25 11:25 ` [PATCH 2/5] phy: tegra: xusb: Skip single function lane programming Thierry Reding
2019-01-28  7:06   ` jckuo
2019-01-25 11:25 ` [PATCH 3/5] phy: tegra: xusb: Parse dual-role mode property Thierry Reding
2019-01-28  7:08   ` jckuo
2019-01-25 11:25 ` Thierry Reding [this message]
2019-01-28  7:22   ` [PATCH 4/5] phy: tegra: xusb: Add support for power supplies jckuo
2019-01-28  8:00     ` Thierry Reding
2019-01-29  6:50       ` jckuo
2019-02-05 12:55       ` Kishon Vijay Abraham I
2019-02-07 11:11         ` Thierry Reding
2019-01-25 11:25 ` [PATCH 5/5] phy: tegra: xusb: Add Tegra186 support Thierry Reding
2019-01-28  7:45   ` jckuo
2019-02-07 11:47   ` Kishon Vijay Abraham I
2019-02-07 12:17     ` Thierry Reding
2019-01-28  7:04 ` [PATCH 1/5] dt-bindings: phy: tegra: " jckuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190125112525.10697-4-thierry.reding@gmail.com \
    --to=thierry.reding@gmail.com \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox