From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Lubomir Rintel <lkundrak@v3.sk>, Olof Johansson <olof@lixom.net>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 3.18 19/61] ARM: mmp/mmp2: dt: enable the clock
Date: Mon, 28 Jan 2019 11:25:41 -0500 [thread overview]
Message-ID: <20190128162623.59854-19-sashal@kernel.org> (raw)
In-Reply-To: <20190128162623.59854-1-sashal@kernel.org>
From: Lubomir Rintel <lkundrak@v3.sk>
[ Upstream commit f36797ee43802b367e59f0f9a9805304a4ff0c98 ]
The device-tree booted MMP2 needs to enable the timer clock, otherwise
it would stop ticking when the boot finishes.
It can also use the clock rate from the clk, the non-DT boards need to
keep using the hardcoded rates.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-mmp/common.h | 2 +-
arch/arm/mach-mmp/mmp2.c | 2 +-
arch/arm/mach-mmp/pxa168.c | 2 +-
arch/arm/mach-mmp/time.c | 32 ++++++++++++++++++++------------
4 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index cf445bae6d77..69c7eec6d1e0 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,7 +1,7 @@
#include <linux/reboot.h>
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-extern void timer_init(int irq);
+extern void timer_init(int irq, unsigned long rate);
extern void __init mmp_map_io(void);
extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index a70b5530bd42..90a0d8114af2 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -133,7 +133,7 @@ void __init mmp2_timer_init(void)
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_TIMERS);
- timer_init(IRQ_MMP2_TIMER1);
+ timer_init(IRQ_MMP2_TIMER1, 6500000);
}
/* on-chip devices */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 144e997624c0..5a616db7f392 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -78,7 +78,7 @@ void __init pxa168_timer_init(void)
/* 3.25MHz, bus/functional clock enabled, release reset */
__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
- timer_init(IRQ_PXA168_TIMER1);
+ timer_init(IRQ_PXA168_TIMER1, 6500000);
}
void pxa168_clear_keypad_wakeup(void)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 2756351dbb35..b66ea443f154 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -39,12 +40,6 @@
#include "clock.h"
-#ifdef CONFIG_CPU_MMP2
-#define MMP_CLOCK_FREQ 6500000
-#else
-#define MMP_CLOCK_FREQ 3250000
-#endif
-
#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
#define MAX_DELTA (0xfffffffe)
@@ -197,19 +192,18 @@ static struct irqaction timer_irq = {
.dev_id = &ckevt,
};
-void __init timer_init(int irq)
+void __init timer_init(int irq, unsigned long rate)
{
timer_config();
- sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
+ sched_clock_register(mmp_read_sched_clock, 32, rate);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
- clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
- clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
- MIN_DELTA, MAX_DELTA);
+ clocksource_register_hz(&cksrc, rate);
+ clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
}
#ifdef CONFIG_OF
@@ -221,7 +215,9 @@ static struct of_device_id mmp_timer_dt_ids[] = {
void __init mmp_dt_init_timer(void)
{
struct device_node *np;
+ struct clk *clk;
int irq, ret;
+ unsigned long rate;
np = of_find_matching_node(NULL, mmp_timer_dt_ids);
if (!np) {
@@ -229,6 +225,18 @@ void __init mmp_dt_init_timer(void)
goto out;
}
+ clk = of_clk_get(np, 0);
+ if (!IS_ERR(clk)) {
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto out;
+ rate = clk_get_rate(clk) / 2;
+ } else if (cpu_is_pj4()) {
+ rate = 6500000;
+ } else {
+ rate = 3250000;
+ }
+
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
ret = -EINVAL;
@@ -239,7 +247,7 @@ void __init mmp_dt_init_timer(void)
ret = -ENOMEM;
goto out;
}
- timer_init(irq);
+ timer_init(irq, rate);
return;
out:
pr_err("Failed to get timer from device tree with error:%d\n", ret);
--
2.19.1
next prev parent reply other threads:[~2019-01-28 16:32 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-28 16:25 [PATCH AUTOSEL 3.18 01/61] staging: iio: adc: ad7280a: handle error from __ad7280_read32() Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 02/61] ath9k: dynack: use authentication messages for 'late' ack Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 03/61] platform/x86: asus-nb-wmi: Map 0x35 to KEY_SCREENLOCK Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 04/61] ARM: 8808/1: kexec:offline panic_smp_self_stop CPU Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 05/61] dlm: Don't swamp the CPU with callbacks queued during recovery Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 06/61] x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux) Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 07/61] powerpc/pseries: add of_node_put() in dlpar_detach_node() Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 08/61] serial: fsl_lpuart: clear parity enable bit when disable parity Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 09/61] serial: core: Allow processing sysrq at port unlock time Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 10/61] staging:iio:ad2s90: Make probe handle spi_setup failure Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 11/61] staging: iio: ad7780: update voltage on read Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 12/61] ARM: OMAP2+: hwmod: Fix some section annotations Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 13/61] modpost: validate symbol names also in find_elf_symbol Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 14/61] perf tools: Add Hygon Dhyana support Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 15/61] soc/tegra: Don't leak device tree node reference Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 16/61] f2fs: move dir data flush to write checkpoint process Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 17/61] nfsd4: fix crash on writing v4_end_grace before nfsd startup Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 18/61] arm64: ftrace: don't adjust the LR value Sasha Levin
2019-01-28 16:25 ` Sasha Levin [this message]
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 20/61] media: DaVinci-VPBE: fix error handling in vpbe_initialize() Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 21/61] smack: fix access permissions for keyring Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 22/61] usb: hub: delay hub autosuspend if USB3 port is still link training Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 23/61] timekeeping: Use proper seqcount initializer Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 24/61] ARM: dts: Fix OMAP4430 SDP Ethernet startup Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 25/61] mips: bpf: fix encoding bug for mm_srlv32_op Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 26/61] sata_rcar: fix deferred probing Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 27/61] clk: imx6sl: ensure MMDC CH0 handshake is bypassed Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 28/61] cpuidle: big.LITTLE: fix refcount leak Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 29/61] udf: Fix BUG on corrupted inode Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 30/61] ARM: pxa: avoid section mismatch warning Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 31/61] ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 32/61] ARM: mmp: fix timer_init calls Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 33/61] memstick: Prevent memstick host from getting runtime suspended during card detection Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 34/61] tty: serial: samsung: Properly set flags in autoCTS mode Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 35/61] arm64: KVM: Skip MMIO insn after emulation Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 36/61] powerpc/uaccess: fix warning/error with access_ok() Sasha Levin
2019-01-28 16:25 ` [PATCH AUTOSEL 3.18 37/61] xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 38/61] drbd: narrow rcu_read_lock in drbd_sync_handshake Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 39/61] drbd: disconnect, if the wrong UUIDs are attached on a connected peer Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 40/61] drbd: skip spurious timeout (ping-timeo) when failing promote Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 41/61] drbd: Avoid Clang warning about pointless switch statment Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 42/61] video: clps711x-fb: release disp device node in probe() Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 43/61] fbdev: fbmem: behave better with small rotated displays and many CPUs Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 44/61] igb: Fix an issue that PME is not enabled during runtime suspend Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 45/61] fbdev: fbcon: Fix unregister crash when more than one framebuffer Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 46/61] NFS: nfs_compare_mount_options always compare auth flavors Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 47/61] hwmon: (lm80) fix a missing check of the status of SMBus read Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 48/61] hwmon: (lm80) fix a missing check of bus read in lm80 probe Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 49/61] crypto: ux500 - Use proper enum in cryp_set_dma_transfer Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 50/61] crypto: ux500 - Use proper enum in hash_set_dma_transfer Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 51/61] cifs: check ntwrk_buf_start for NULL before dereferencing it Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 52/61] um: Avoid marking pages with "changed protection" Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 53/61] niu: fix missing checks of niu_pci_eeprom_read Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 54/61] scripts/decode_stacktrace: only strip base path when a prefix of the path Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 55/61] ocfs2: don't clear bh uptodate for block read Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 56/61] isdn: hisax: hfc_pci: Fix a possible concurrency use-after-free bug in HFCPCI_l1hw() Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 57/61] gdrom: fix a memory leak bug Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 58/61] block/swim3: Fix -EBUSY error when re-opening device after unmount Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 59/61] kernel/hung_task.c: break RCU locks based on jiffies Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 60/61] fs/epoll: drop ovflist branch prediction Sasha Levin
2019-01-28 16:26 ` [PATCH AUTOSEL 3.18 61/61] exec: load_script: don't blindly truncate shebang string Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190128162623.59854-19-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkundrak@v3.sk \
--cc=olof@lixom.net \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox