public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>, Joe Perches <joe@perches.com>,
	Eric Dumazet <eric.dumazet@gmail.com>,
	Paul Zimmerman <pauldzim@gmail.com>,
	Michal Kubecek <mkubecek@suse.cz>,
	Realtek linux nic maintainers <nic_swsd@realtek.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] r8169: Avoid pointer aliasing
Date: Wed,  6 Feb 2019 13:30:18 +0100	[thread overview]
Message-ID: <20190206123018.24802-2-thierry.reding@gmail.com> (raw)
In-Reply-To: <20190206123018.24802-1-thierry.reding@gmail.com>

From: Thierry Reding <treding@nvidia.com>

Read MAC address 32-bit at a time and manually extract the individual
bytes. This avoids pointer aliasing and gives the compiler a better
chance of optimizing the operation.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Applies to net-next.

I tested this on a Jetson TX2 with an add-in Realtek ethernet card that
has a properly programmed OTP to verify that I got the endianess right.
Seems like everything works and the device behaves the same with or
without this patch.

Changes in v3:
- align MAC address to u16 for is_valid_ether_addr()

 drivers/net/ethernet/realtek/r8169.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 501891be7c56..1dd72137fd53 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -7113,12 +7113,21 @@ static int rtl_alloc_irq(struct rtl8169_private *tp)
 static void rtl_read_mac_address(struct rtl8169_private *tp,
 				 u8 mac_addr[ETH_ALEN])
 {
+	u32 value;
+
 	/* Get MAC address */
 	switch (tp->mac_version) {
 	case RTL_GIGA_MAC_VER_35 ... RTL_GIGA_MAC_VER_38:
 	case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51:
-		*(u32 *)&mac_addr[0] = rtl_eri_read(tp, 0xe0, ERIAR_EXGMAC);
-		*(u16 *)&mac_addr[4] = rtl_eri_read(tp, 0xe4, ERIAR_EXGMAC);
+		value = rtl_eri_read(tp, 0xe0, ERIAR_EXGMAC);
+		mac_addr[0] = (value >>  0) & 0xff;
+		mac_addr[1] = (value >>  8) & 0xff;
+		mac_addr[2] = (value >> 16) & 0xff;
+		mac_addr[3] = (value >> 24) & 0xff;
+
+		value = rtl_eri_read(tp, 0xe4, ERIAR_EXGMAC);
+		mac_addr[4] = (value >>  0) & 0xff;
+		mac_addr[5] = (value >>  8) & 0xff;
 		break;
 	default:
 		break;
@@ -7316,7 +7325,8 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)
 static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
-	u8 mac_addr[ETH_ALEN] __aligned(4) = {};
+	/* align to u16 for is_valid_ether_addr() */
+	u8 mac_addr[ETH_ALEN] __aligned(2) = {};
 	struct rtl8169_private *tp;
 	struct net_device *dev;
 	int chipset, region, i;
-- 
2.19.1


  reply	other threads:[~2019-02-06 12:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06 12:30 [PATCH v3 1/2] r8169: Load MAC address from device tree if present Thierry Reding
2019-02-06 12:30 ` Thierry Reding [this message]
2019-02-06 12:35   ` [PATCH v3 2/2] r8169: Avoid pointer aliasing Thierry Reding
2019-02-06 13:28   ` Andrew Lunn
2019-02-06 21:40   ` David Miller
2019-02-06 12:33 ` [PATCH v3 1/2] r8169: Load MAC address from device tree if present Thierry Reding
2019-02-06 13:29 ` Andrew Lunn
2019-02-06 21:40 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190206123018.24802-2-thierry.reding@gmail.com \
    --to=thierry.reding@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=eric.dumazet@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkubecek@suse.cz \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=pauldzim@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox