[PATCH AUTOSEL 4.19 01/83] backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables

[PATCH AUTOSEL 4.19 01/83] backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables

[Sasha Levin]

From: Heiko Stuebner <heiko.stuebner@bq.com>

[ Upstream commit 61170ee9386888f1e6f7e9cc58e8d9a8c2a3c1dd ]

Commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly
to human eye") made the parse-dt function return early when using an auto-
generated brightness-table, but didn't take into account that some more
settings were handled below the brightness handling, like power-on-delays
and also setting the pdata enable-gpio to -EINVAL.

This surfaces for example in the case of a backlight without any
enable-gpio which then tries to use gpio-0 in error.

Fix this by simply moving the trailing settings above the brightness
handling.

Fixes: 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/pwm_bl.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index bdfcc0a71db1..6bde543452f2 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -262,6 +262,16 @@ static int pwm_backlight_parse_dt(struct device *dev,
 
 	memset(data, 0, sizeof(*data));
 
+	/*
+	 * These values are optional and set as 0 by default, the out values
+	 * are modified only if a valid u32 value can be decoded.
+	 */
+	of_property_read_u32(node, "post-pwm-on-delay-ms",
+			     &data->post_pwm_on_delay);
+	of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay);
+
+	data->enable_gpio = -EINVAL;
+
 	/*
 	 * Determine the number of brightness levels, if this property is not
 	 * set a default table of brightness levels will be used.
@@ -374,15 +384,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
 		data->max_brightness--;
 	}
 
-	/*
-	 * These values are optional and set as 0 by default, the out values
-	 * are modified only if a valid u32 value can be decoded.
-	 */
-	of_property_read_u32(node, "post-pwm-on-delay-ms",
-			     &data->post_pwm_on_delay);
-	of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay);
-
-	data->enable_gpio = -EINVAL;
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 02/83] mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]

Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that
different instances are uniquely identified. This is required in order
to support registering of multiple instances of same ti_am335x_tscadc IP.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ti_am335x_tscadc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 7a30546880a4..fe8d335a4d74 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -264,8 +264,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		cell->pdata_size = sizeof(tscadc);
 	}
 
-	err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
-			tscadc->used_cells, NULL, 0, NULL);
+	err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+			      tscadc->cells, tscadc->used_cells, NULL,
+			      0, NULL);
 	if (err < 0)
 		goto err_disable_clk;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 03/83] pvcalls-front: read all data before closing the connection

[Sasha Levin]

From: Stefano Stabellini <sstabellini@kernel.org>

[ Upstream commit b79470b64fa9266948d1ce8d825ced94c4f63293 ]

When a connection is closing in_error is set to ENOTCONN. There could
still be outstanding data on the ring left by the backend. Before
closing the connection on the frontend side, drain the ring.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-front.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 77224d8f3e6f..e5d95aab2cb8 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -560,15 +560,13 @@ static int __read_ring(struct pvcalls_data_intf *intf,
 	error = intf->in_error;
 	/* get pointers before reading from the ring */
 	virt_rmb();
-	if (error < 0)
-		return error;
 
 	size = pvcalls_queued(prod, cons, array_size);
 	masked_prod = pvcalls_mask(prod, array_size);
 	masked_cons = pvcalls_mask(cons, array_size);
 
 	if (size == 0)
-		return 0;
+		return error ?: size;
 
 	if (len > size)
 		len = size;
-- 
2.19.1

[PATCH AUTOSEL 4.19 04/83] pvcalls-front: don't try to free unallocated rings

[Sasha Levin]

From: Stefano Stabellini <sstabellini@kernel.org>

[ Upstream commit 96283f9a084e23d7cda2d3c5d1ffa6df6cf1ecec ]

inflight_req_id is 0 when initialized. If inflight_req_id is 0, there is
no accept_map to free. Fix the check in pvcalls_front_release.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-front.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index e5d95aab2cb8..4f3d664b3f39 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -1030,8 +1030,8 @@ int pvcalls_front_release(struct socket *sock)
 		spin_lock(&bedata->socket_lock);
 		list_del(&map->list);
 		spin_unlock(&bedata->socket_lock);
-		if (READ_ONCE(map->passive.inflight_req_id) !=
-		    PVCALLS_INVALID_ID) {
+		if (READ_ONCE(map->passive.inflight_req_id) != PVCALLS_INVALID_ID &&
+			READ_ONCE(map->passive.inflight_req_id) != 0) {
 			pvcalls_front_free_map(bedata,
 					       map->passive.accept_map);
 		}
-- 
2.19.1

[PATCH AUTOSEL 4.19 05/83] pvcalls-front: properly allocate sk

[Sasha Levin]

From: Stefano Stabellini <sstabellini@kernel.org>

[ Upstream commit beee1fbe8f7d57d6ebaa5188f9f4db89c2077196 ]

Don't use kzalloc: it ends up leaving sk->sk_prot not properly
initialized. Use sk_alloc instead and define our own trivial struct
proto.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-front.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 4f3d664b3f39..01588582ae66 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -31,6 +31,12 @@
 #define PVCALLS_NR_RSP_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
 #define PVCALLS_FRONT_MAX_SPIN 5000
 
+static struct proto pvcalls_proto = {
+	.name	= "PVCalls",
+	.owner	= THIS_MODULE,
+	.obj_size = sizeof(struct sock),
+};
+
 struct pvcalls_bedata {
 	struct xen_pvcalls_front_ring ring;
 	grant_ref_t ref;
@@ -837,7 +843,7 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
 
 received:
 	map2->sock = newsock;
-	newsock->sk = kzalloc(sizeof(*newsock->sk), GFP_KERNEL);
+	newsock->sk = sk_alloc(sock_net(sock->sk), PF_INET, GFP_KERNEL, &pvcalls_proto, false);
 	if (!newsock->sk) {
 		bedata->rsp[req_id].req_id = PVCALLS_INVALID_ID;
 		map->passive.inflight_req_id = PVCALLS_INVALID_ID;
-- 
2.19.1

[PATCH AUTOSEL 4.19 06/83] pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read

[Sasha Levin]

From: Stefano Stabellini <sstabellini@kernel.org>

[ Upstream commit e6587cdbd732eacb4c7ce592ed46f7bbcefb655f ]

When a connection is closing we receive on pvcalls_sk_state_change
notification. Instead of setting the connection as closed immediately
(-ENOTCONN), let's read one more time from it: pvcalls_conn_back_read
will set the connection as closed when necessary.

That way, we avoid races between pvcalls_sk_state_change and
pvcalls_back_ioworker.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-back.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/xen/pvcalls-back.c b/drivers/xen/pvcalls-back.c
index b1092fbefa63..e8b3ff8e7868 100644
--- a/drivers/xen/pvcalls-back.c
+++ b/drivers/xen/pvcalls-back.c
@@ -160,9 +160,10 @@ static void pvcalls_conn_back_read(void *opaque)
 
 	/* write the data, then modify the indexes */
 	virt_wmb();
-	if (ret < 0)
+	if (ret < 0) {
+		atomic_set(&map->read, 0);
 		intf->in_error = ret;
-	else
+	} else
 		intf->in_prod = prod + ret;
 	/* update the indexes, then notify the other end */
 	virt_wmb();
@@ -288,7 +289,7 @@ static void pvcalls_sk_state_change(struct sock *sock)
 		return;
 
 	intf = map->ring;
-	intf->in_error = -ENOTCONN;
+	atomic_inc(&map->read);
 	notify_remote_via_irq(map->irq);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 07/83] mfd: twl-core: Fix section annotations on {,un}protect_pm_master

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from
the function twl_probe() to the function
.init.text:unprotect_pm_master()
The function twl_probe() references
the function __init unprotect_pm_master().
This is often because twl_probe lacks a __init
annotation or the annotation of unprotect_pm_master is wrong.

Remove the __init annotation on the *protect_pm_master functions so
there is no more mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/twl-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 4be3d239da9e..299016bc46d9 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -979,7 +979,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
  * letting it generate the right frequencies for USB, MADC, and
  * other purposes.
  */
-static inline int __init protect_pm_master(void)
+static inline int protect_pm_master(void)
 {
 	int e = 0;
 
@@ -988,7 +988,7 @@ static inline int __init protect_pm_master(void)
 	return e;
 }
 
-static inline int __init unprotect_pm_master(void)
+static inline int unprotect_pm_master(void)
 {
 	int e = 0;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 08/83] mfd: db8500-prcmu: Fix some section annotations

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]

When building the kernel with Clang, the following section mismatch
warnings appear:

WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:init_prcm_registers()
The function db8500_prcmu_probe() references
the function __init init_prcm_registers().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of init_prcm_registers is wrong.

WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:fw_project_name()
The function db8500_prcmu_probe() references
the function __init fw_project_name().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of fw_project_name is wrong.

db8500_prcmu_probe should not be marked as __init so remove the __init
annotation from fw_project_name and init_prcm_registers.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/db8500-prcmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 5970b8def548..aec20e1c7d3d 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2584,7 +2584,7 @@ static struct irq_chip prcmu_irq_chip = {
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-static __init char *fw_project_name(u32 project)
+static char *fw_project_name(u32 project)
 {
 	switch (project) {
 	case PRCMU_FW_PROJECT_U8500:
@@ -2732,7 +2732,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
 	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
 }
 
-static void __init init_prcm_registers(void)
+static void init_prcm_registers(void)
 {
 	u32 val;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 09/83] mfd: mt6397: Do not call irq_domain_remove if PMIC unsupported

[Sasha Levin]

From: Nicolas Boichat <drinkcat@chromium.org>

[ Upstream commit a177276aa098aa47a100d51a13eaaef029604b6d ]

If the PMIC ID is unknown, the current code would call
irq_domain_remove and panic, as pmic->irq_domain is only
initialized by mt6397_irq_init.

Return immediately with an error, if the chip ID is unsupported.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/mt6397-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 77b64bd64df3..ab24e176ef44 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -329,8 +329,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 	default:
 		dev_err(&pdev->dev, "unsupported chip: %d\n", id);
-		ret = -ENODEV;
-		break;
+		return -ENODEV;
 	}
 
 	if (ret) {
-- 
2.19.1

[PATCH AUTOSEL 4.19 10/83] mfd: ab8500-core: Return zero in get_register_interruptible()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]

This function is supposed to return zero on success or negative error
codes on error.  Unfortunately, there is a bug so it sometimes returns
non-zero, positive numbers on success.

I noticed this bug during review and I can't test it.  It does appear
that the return is sometimes propogated back to _regmap_read() where all
non-zero returns are treated as failure so this may affect run time.

Fixes: 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ab8500-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 30d09d177171..11ab17f64c64 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -261,7 +261,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	mutex_unlock(&ab8500->lock);
 	dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
 
-	return ret;
+	return (ret < 0) ? ret : 0;
 }
 
 static int ab8500_get_register(struct device *dev, u8 bank,
-- 
2.19.1

[PATCH AUTOSEL 4.19 11/83] mfd: bd9571mwv: Add volatile register to make DVFS work

[Sasha Levin]

From: Dien Pham <dien.pham.ry@renesas.com>

[ Upstream commit b0aff01e7aa6ad2d6998ef1323843212d1db8b04 ]

Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table,
the physical register value is not updated by regmap and DVFS doesn't
work as expected. Fix it!

Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[wsa: rebase, add 'Fixes', reword commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/bd9571mwv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
index 503979c81dae..fab3cdc27ed6 100644
--- a/drivers/mfd/bd9571mwv.c
+++ b/drivers/mfd/bd9571mwv.c
@@ -59,6 +59,7 @@ static const struct regmap_access_table bd9571mwv_writable_table = {
 };
 
 static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = {
+	regmap_reg_range(BD9571MWV_DVFS_MONIVDAC, BD9571MWV_DVFS_MONIVDAC),
 	regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
 	regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
 	regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
-- 
2.19.1

[PATCH AUTOSEL 4.19 12/83] mfd: qcom_rpm: write fw_version to CTRL_REG

[Sasha Levin]

From: Jonathan Marek <jonathan@marek.ca>

[ Upstream commit 504e4175829c44328773b96ad9c538e4783a8d22 ]

This is required as part of the initialization sequence on certain SoCs.

If these registers are not initialized, the hardware can be unresponsive.
This fixes the driver on apq8060 (HP TouchPad device).

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/qcom_rpm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 52fafea06067..8d420c37b2a6 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -638,6 +638,10 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 		return -EFAULT;
 	}
 
+	writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
+	writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
+	writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
+
 	dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
 							fw_version[1],
 							fw_version[2]);
-- 
2.19.1

[PATCH AUTOSEL 4.19 13/83] mfd: wm5110: Add missing ASRC rate register

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/wm5110-tables.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 1ee68bd440fb..16c6e2accfaa 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -1618,6 +1618,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000ECD, 0x0000 },    /* R3789  - HPLPF4_2 */
 	{ 0x00000EE0, 0x0000 },    /* R3808  - ASRC_ENABLE */
 	{ 0x00000EE2, 0x0000 },    /* R3810  - ASRC_RATE1 */
+	{ 0x00000EE3, 0x4000 },    /* R3811  - ASRC_RATE2 */
 	{ 0x00000EF0, 0x0000 },    /* R3824  - ISRC 1 CTRL 1 */
 	{ 0x00000EF1, 0x0000 },    /* R3825  - ISRC 1 CTRL 2 */
 	{ 0x00000EF2, 0x0000 },    /* R3826  - ISRC 1 CTRL 3 */
@@ -2869,6 +2870,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASRC_ENABLE:
 	case ARIZONA_ASRC_STATUS:
 	case ARIZONA_ASRC_RATE1:
+	case ARIZONA_ASRC_RATE2:
 	case ARIZONA_ISRC_1_CTRL_1:
 	case ARIZONA_ISRC_1_CTRL_2:
 	case ARIZONA_ISRC_1_CTRL_3:
-- 
2.19.1

[PATCH AUTOSEL 4.19 14/83] mfd: axp20x: Add AC power supply cell for AXP813

[Sasha Levin]

From: Oskari Lemmela <oskari@lemmela.net>

[ Upstream commit 4a19f9a65375ca9781b3ca9e810ece92edfc3e78 ]

As axp20x-ac-power-supply now supports AXP813, add a cell for it.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/axp20x.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 0be511dd93d0..dfc3cff1d08b 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -778,6 +778,11 @@ static const struct mfd_cell axp813_cells[] = {
 	}, {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp813-battery-power-supply",
+	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp813-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
+		.resources	= axp20x_ac_power_supply_resources,
 	},
 };
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 15/83] mfd: axp20x: Re-align MFD cell entries

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 753a8d083e085c6f552c7982749de4cc7c40e2ac ]

In the axp20x driver, the various mfd_cell lists had varying amounts
of indentation, sometimes even within the same list. For the axp288,
there's no alignment at all.

Re-align the right hand side of the assignments with the least amount
of tabs possible. Also collapse the closing bracket and the opening
bracket of the next entry onto the same line for the axp288, to be
consistent with all the other mfd_cell lists.

This patch is whitespace change only. No functionality is modified.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/axp20x.c | 107 +++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 56 deletions(-)

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index dfc3cff1d08b..8037b4e01ed6 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -640,9 +640,9 @@ static const struct mfd_cell axp221_cells[] = {
 
 static const struct mfd_cell axp223_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp22x_pek_resources),
-		.resources		= axp22x_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp22x_pek_resources),
+		.resources	= axp22x_pek_resources,
 	}, {
 		.name		= "axp22x-adc",
 		.of_compatible	= "x-powers,axp221-adc",
@@ -650,7 +650,7 @@ static const struct mfd_cell axp223_cells[] = {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp221-battery-power-supply",
 	}, {
-		.name			= "axp20x-regulator",
+		.name		= "axp20x-regulator",
 	}, {
 		.name		= "axp20x-ac-power-supply",
 		.of_compatible	= "x-powers,axp221-ac-power-supply",
@@ -666,9 +666,9 @@ static const struct mfd_cell axp223_cells[] = {
 
 static const struct mfd_cell axp152_cells[] = {
 	{
-		.name			= "axp20x-pek",
-		.num_resources		= ARRAY_SIZE(axp152_pek_resources),
-		.resources		= axp152_pek_resources,
+		.name		= "axp20x-pek",
+		.num_resources	= ARRAY_SIZE(axp152_pek_resources),
+		.resources	= axp152_pek_resources,
 	},
 };
 
@@ -697,84 +697,79 @@ static const struct resource axp288_charger_resources[] = {
 
 static const struct mfd_cell axp288_cells[] = {
 	{
-		.name = "axp288_adc",
-		.num_resources = ARRAY_SIZE(axp288_adc_resources),
-		.resources = axp288_adc_resources,
-	},
-	{
-		.name = "axp288_extcon",
-		.num_resources = ARRAY_SIZE(axp288_extcon_resources),
-		.resources = axp288_extcon_resources,
-	},
-	{
-		.name = "axp288_charger",
-		.num_resources = ARRAY_SIZE(axp288_charger_resources),
-		.resources = axp288_charger_resources,
-	},
-	{
-		.name = "axp288_fuel_gauge",
-		.num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources),
-		.resources = axp288_fuel_gauge_resources,
-	},
-	{
-		.name = "axp221-pek",
-		.num_resources = ARRAY_SIZE(axp288_power_button_resources),
-		.resources = axp288_power_button_resources,
-	},
-	{
-		.name = "axp288_pmic_acpi",
+		.name		= "axp288_adc",
+		.num_resources	= ARRAY_SIZE(axp288_adc_resources),
+		.resources	= axp288_adc_resources,
+	}, {
+		.name		= "axp288_extcon",
+		.num_resources	= ARRAY_SIZE(axp288_extcon_resources),
+		.resources	= axp288_extcon_resources,
+	}, {
+		.name		= "axp288_charger",
+		.num_resources	= ARRAY_SIZE(axp288_charger_resources),
+		.resources	= axp288_charger_resources,
+	}, {
+		.name		= "axp288_fuel_gauge",
+		.num_resources	= ARRAY_SIZE(axp288_fuel_gauge_resources),
+		.resources	= axp288_fuel_gauge_resources,
+	}, {
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp288_power_button_resources),
+		.resources	= axp288_power_button_resources,
+	}, {
+		.name		= "axp288_pmic_acpi",
 	},
 };
 
 static const struct mfd_cell axp803_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp803_pek_resources),
-		.resources		= axp803_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp803_pek_resources),
+		.resources	= axp803_pek_resources,
 	},
-	{	.name			= "axp20x-regulator" },
+	{	.name		= "axp20x-regulator" },
 };
 
 static const struct mfd_cell axp806_self_working_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp806_pek_resources),
-		.resources		= axp806_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp806_pek_resources),
+		.resources	= axp806_pek_resources,
 	},
-	{	.name			= "axp20x-regulator" },
+	{	.name		= "axp20x-regulator" },
 };
 
 static const struct mfd_cell axp806_cells[] = {
 	{
-		.id			= 2,
-		.name			= "axp20x-regulator",
+		.id		= 2,
+		.name		= "axp20x-regulator",
 	},
 };
 
 static const struct mfd_cell axp809_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp809_pek_resources),
-		.resources		= axp809_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp809_pek_resources),
+		.resources	= axp809_pek_resources,
 	}, {
-		.id			= 1,
-		.name			= "axp20x-regulator",
+		.id		= 1,
+		.name		= "axp20x-regulator",
 	},
 };
 
 static const struct mfd_cell axp813_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp803_pek_resources),
-		.resources		= axp803_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp803_pek_resources),
+		.resources	= axp803_pek_resources,
 	}, {
-		.name			= "axp20x-regulator",
+		.name		= "axp20x-regulator",
 	}, {
-		.name			= "axp20x-gpio",
-		.of_compatible		= "x-powers,axp813-gpio",
+		.name		= "axp20x-gpio",
+		.of_compatible	= "x-powers,axp813-gpio",
 	}, {
-		.name			= "axp813-adc",
-		.of_compatible		= "x-powers,axp813-adc",
+		.name		= "axp813-adc",
+		.of_compatible	= "x-powers,axp813-adc",
 	}, {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp813-battery-power-supply",
-- 
2.19.1

[PATCH AUTOSEL 4.19 16/83] mfd: axp20x: Add supported cells for AXP803

[Sasha Levin]

From: Oskari Lemmela <oskari@lemmela.net>

[ Upstream commit ea90e7b47f0a8bd2fe14e9a88f523de7c67db90a ]

Parts of the AXP803 are compatible with their counterparts on the AXP813.
These include the GPIO, ADC, AC and battery power supplies.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/axp20x.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 8037b4e01ed6..f8e0fa97bb31 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -726,6 +726,20 @@ static const struct mfd_cell axp803_cells[] = {
 		.name		= "axp221-pek",
 		.num_resources	= ARRAY_SIZE(axp803_pek_resources),
 		.resources	= axp803_pek_resources,
+	}, {
+		.name		= "axp20x-gpio",
+		.of_compatible	= "x-powers,axp813-gpio",
+	}, {
+		.name		= "axp813-adc",
+		.of_compatible	= "x-powers,axp813-adc",
+	}, {
+		.name		= "axp20x-battery-power-supply",
+		.of_compatible	= "x-powers,axp813-battery-power-supply",
+	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp813-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
+		.resources	= axp20x_ac_power_supply_resources,
 	},
 	{	.name		= "axp20x-regulator" },
 };
-- 
2.19.1

[PATCH AUTOSEL 4.19 17/83] mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove

[Sasha Levin]

From: Enric Balletbo i Serra <enric.balletbo@collabora.com>

[ Upstream commit 18e294ddafaeb80a1e2e10c9bd750a6cb8388d5b ]

The driver adds different MFD child devices via mfd_add_devices() and
hence it is required to call mfd_remove_devices() to remove MFD child
devices.

Fixes: 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/cros_ec_dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 6b22d54a540d..bccde3eac92c 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -499,6 +499,7 @@ static int ec_device_remove(struct platform_device *pdev)
 
 	cros_ec_debugfs_remove(ec);
 
+	mfd_remove_devices(ec->dev);
 	cdev_del(&ec->cdev);
 	device_unregister(&ec->class_dev);
 	return 0;
-- 
2.19.1

[PATCH AUTOSEL 4.19 18/83] mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()

[Sasha Levin]

From: Keerthy <j-keerthy@ti.com>

[ Upstream commit 75d4c5e03c2ae9902ab521024b10291f6fc9515b ]

Use devm_regmap_add_irq_chip and clean up error path in probe
and also the remove function.

Reported-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/tps65218.c | 24 +++---------------------
 1 file changed, 3 insertions(+), 21 deletions(-)

diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
index 910f569ff77c..8bcdecf494d0 100644
--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -235,9 +235,9 @@ static int tps65218_probe(struct i2c_client *client,
 
 	mutex_init(&tps->tps_lock);
 
-	ret = regmap_add_irq_chip(tps->regmap, tps->irq,
-			IRQF_ONESHOT, 0, &tps65218_irq_chip,
-			&tps->irq_data);
+	ret = devm_regmap_add_irq_chip(&client->dev, tps->regmap, tps->irq,
+				       IRQF_ONESHOT, 0, &tps65218_irq_chip,
+				       &tps->irq_data);
 	if (ret < 0)
 		return ret;
 
@@ -253,26 +253,9 @@ static int tps65218_probe(struct i2c_client *client,
 			      ARRAY_SIZE(tps65218_cells), NULL, 0,
 			      regmap_irq_get_domain(tps->irq_data));
 
-	if (ret < 0)
-		goto err_irq;
-
-	return 0;
-
-err_irq:
-	regmap_del_irq_chip(tps->irq, tps->irq_data);
-
 	return ret;
 }
 
-static int tps65218_remove(struct i2c_client *client)
-{
-	struct tps65218 *tps = i2c_get_clientdata(client);
-
-	regmap_del_irq_chip(tps->irq, tps->irq_data);
-
-	return 0;
-}
-
 static const struct i2c_device_id tps65218_id_table[] = {
 	{ "tps65218", TPS65218 },
 	{ },
@@ -285,7 +268,6 @@ static struct i2c_driver tps65218_driver = {
 		.of_match_table = of_tps65218_match_table,
 	},
 	.probe		= tps65218_probe,
-	.remove		= tps65218_remove,
 	.id_table       = tps65218_id_table,
 };
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 19/83] mfd: mc13xxx: Fix a missing check of a register-read failure

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]

When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will
contain random value. Further execution uses "old_adc0" even when
mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits
the execution when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/mc13xxx-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index c63e331738c1..234febfe6398 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -274,7 +274,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 
 	mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
 
-	mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	ret = mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	if (ret)
+		goto out;
 
 	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
 	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
-- 
2.19.1

[PATCH AUTOSEL 4.19 20/83] xen/pvcalls: remove set but not used variable 'intf'

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 1f8ce09b36c41a026a37a24b20efa32000892a64 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change':
drivers/xen/pvcalls-back.c:286:28: warning:
 variable 'intf' set but not used [-Wunused-but-set-variable]

It not used since e6587cdbd732 ("pvcalls-back: set -ENOTCONN in
pvcalls_conn_back_read")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-back.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/xen/pvcalls-back.c b/drivers/xen/pvcalls-back.c
index e8b3ff8e7868..d4ea33581ac2 100644
--- a/drivers/xen/pvcalls-back.c
+++ b/drivers/xen/pvcalls-back.c
@@ -283,12 +283,10 @@ static int pvcalls_back_socket(struct xenbus_device *dev,
 static void pvcalls_sk_state_change(struct sock *sock)
 {
 	struct sock_mapping *map = sock->sk_user_data;
-	struct pvcalls_data_intf *intf;
 
 	if (map == NULL)
 		return;
 
-	intf = map->ring;
 	atomic_inc(&map->read);
 	notify_remote_via_irq(map->irq);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 21/83] qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count

[Sasha Levin]

From: Denis Bolotin <dbolotin@marvell.com>

[ Upstream commit 2d533a9287f2011632977e87ce2783f4c689c984 ]

In PBL chains with non power of 2 page count, the producer is not at the
beginning of the chain when index is 0 after a wrap. Therefore, after the
producer index wrap around, page index should be calculated more carefully.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/qed/qed_chain.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/include/linux/qed/qed_chain.h b/include/linux/qed/qed_chain.h
index 59ddf9af909e..2dd0a9ed5b36 100644
--- a/include/linux/qed/qed_chain.h
+++ b/include/linux/qed/qed_chain.h
@@ -663,6 +663,37 @@ static inline void *qed_chain_get_last_elem(struct qed_chain *p_chain)
 static inline void qed_chain_set_prod(struct qed_chain *p_chain,
 				      u32 prod_idx, void *p_prod_elem)
 {
+	if (p_chain->mode == QED_CHAIN_MODE_PBL) {
+		u32 cur_prod, page_mask, page_cnt, page_diff;
+
+		cur_prod = is_chain_u16(p_chain) ? p_chain->u.chain16.prod_idx :
+			   p_chain->u.chain32.prod_idx;
+
+		/* Assume that number of elements in a page is power of 2 */
+		page_mask = ~p_chain->elem_per_page_mask;
+
+		/* Use "cur_prod - 1" and "prod_idx - 1" since producer index
+		 * reaches the first element of next page before the page index
+		 * is incremented. See qed_chain_produce().
+		 * Index wrap around is not a problem because the difference
+		 * between current and given producer indices is always
+		 * positive and lower than the chain's capacity.
+		 */
+		page_diff = (((cur_prod - 1) & page_mask) -
+			     ((prod_idx - 1) & page_mask)) /
+			    p_chain->elem_per_page;
+
+		page_cnt = qed_chain_get_page_cnt(p_chain);
+		if (is_chain_u16(p_chain))
+			p_chain->pbl.c.u16.prod_page_idx =
+				(p_chain->pbl.c.u16.prod_page_idx -
+				 page_diff + page_cnt) % page_cnt;
+		else
+			p_chain->pbl.c.u32.prod_page_idx =
+				(p_chain->pbl.c.u32.prod_page_idx -
+				 page_diff + page_cnt) % page_cnt;
+	}
+
 	if (is_chain_u16(p_chain))
 		p_chain->u.chain16.prod_idx = (u16) prod_idx;
 	else
-- 
2.19.1

[PATCH AUTOSEL 4.19 22/83] qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier

[Sasha Levin]

From: Denis Bolotin <dbolotin@marvell.com>

[ Upstream commit 46721c3d9e273aea880e9ff835b0e1271e1cd2fb ]

Make sure chain element is updated before ringing the doorbell.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_ll2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index 2fa1c050a14b..92cd8abeb41d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -1592,6 +1592,10 @@ static void qed_ll2_post_rx_buffer_notify_fw(struct qed_hwfn *p_hwfn,
 	cq_prod = qed_chain_get_prod_idx(&p_rx->rcq_chain);
 	rx_prod.bd_prod = cpu_to_le16(bd_prod);
 	rx_prod.cqe_prod = cpu_to_le16(cq_prod);
+
+	/* Make sure chain element is updated before ringing the doorbell */
+	dma_wmb();
+
 	DIRECT_REG_WR(p_rx->set_prod_addr, *((u32 *)&rx_prod));
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/83] net: hns: Fix use after free identified by SLUB debug

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit bb989501abcafa0de5f18b0ec0ec459b5b817908 ]

When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will
identify a use after free bug:

[134.189505] Unable to handle kernel paging request at virtual address
		006b6b6b6b6b6b6b
[134.197553] Mem abort info:
[134.200381]   ESR = 0x96000004
[134.203487]   Exception class = DABT (current EL), IL = 32 bits
[134.209497]   SET = 0, FnV = 0
[134.212596]   EA = 0, S1PTW = 0
[134.215777] Data abort info:
[134.218701]   ISV = 0, ISS = 0x00000004
[134.222596]   CM = 0, WnR = 0
[134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges
[134.232851] Internal error: Oops: 96000004 [#1] SMP
[134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G
		OE     4.19.5-1.2.34.aarch64 #1
[134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018
[134.255181] pstate: 20000005 (nzCv daif -PAN -UAO)
[134.260044] pc : hns_ae_put_handle+0x38/0x60
[134.264372] lr : hns_ae_put_handle+0x24/0x60
[134.268700] sp : ffff00001be93c50
[134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040
[134.277442] x27: 0000000000000000 x26: 0000000000000000
[134.282830] x25: 0000000056000000 x24: 0000000000000015
[134.288284] x23: ffff0000096fe098 x22: ffff000001050070
[134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098
[134.303287] x19: ffff80afb75ec098 x18: 0000000000000000
[134.312945] x17: 0000000000000000 x16: 0000000000000000
[134.322517] x15: 0000000000000002 x14: 0000000000000000
[134.332030] x13: dead000000000100 x12: ffff7e02bea3c988
[134.341487] x11: ffff80affbee9e68 x10: 0000000000000000
[134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000
[134.360569] x7 : dead000000000100 x6 : ffff000009579748
[134.370059] x5 : 0000000000210d00 x4 : 0000000000000000
[134.379550] x3 : 0000000000000001 x2 : 0000000000000000
[134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000
[134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd)
[134.408498] Call trace:
[134.414611]  hns_ae_put_handle+0x38/0x60
[134.422208]  hnae_put_handle+0xd4/0x108
[134.429563]  hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv]
[134.438342]  platform_drv_remove+0x2c/0x70
[134.445958]  device_release_driver_internal+0x174/0x208
[134.454810]  driver_detach+0x70/0xd8
[134.461913]  bus_remove_driver+0x64/0xe8
[134.469396]  driver_unregister+0x34/0x60
[134.476822]  platform_driver_unregister+0x20/0x30
[134.485130]  hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv]
[134.494634]  __arm64_sys_delete_module+0x238/0x290

struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is
freed, than use hnae_handle will cause use after free panic.

This patch frees vf_cb after hnae_handle used.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
index ad1779fc410e..a78bfafd212c 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
@@ -147,12 +147,10 @@ static void hns_ae_put_handle(struct hnae_handle *handle)
 	struct hnae_vf_cb *vf_cb = hns_ae_get_vf_cb(handle);
 	int i;
 
-	vf_cb->mac_cb	 = NULL;
-
-	kfree(vf_cb);
-
 	for (i = 0; i < handle->q_num; i++)
 		hns_ae_get_ring_pair(handle->qs[i])->used_by_vf = 0;
+
+	kfree(vf_cb);
 }
 
 static int hns_ae_wait_flow_down(struct hnae_handle *handle)
-- 
2.19.1

[PATCH AUTOSEL 4.19 24/83] bpf: Fix [::] -> [::1] rewrite in sys_sendmsg

[Sasha Levin]

From: Andrey Ignatov <rdna@fb.com>

[ Upstream commit e8e36984080b55ac5e57bdb09a5b570f2fc8e963 ]

sys_sendmsg has supported unspecified destination IPv6 (wildcard) for
unconnected UDP sockets since 876c7f41. When [::] is passed by user as
destination, sys_sendmsg rewrites it with [::1] to be consistent with
BSD (see "BSD'ism" comment in the code).

This didn't work when cgroup-bpf was enabled though since the rewrite
[::] -> [::1] happened before passing control to cgroup-bpf block where
fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that
might or might not be changed by BPF program). That way if user passed
[::] as dst IPv6 it was first rewritten with [::1] by original code from
876c7f41, but then rewritten back with [::] by cgroup-bpf block.

It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present
(CONFIG_CGROUP_BPF=y was enough).

The fix is to apply BSD'ism after cgroup-bpf block so that [::] is
replaced with [::1] no matter where it came from: passed by user to
sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.

Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Reported-by: Nitin Rawat <nitin.rawat@intel.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/udp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 76ba2f34ef6b..cab8b2b647f9 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1322,10 +1322,7 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 	ipc6.opt = opt;
 
 	fl6.flowi6_proto = sk->sk_protocol;
-	if (!ipv6_addr_any(daddr))
-		fl6.daddr = *daddr;
-	else
-		fl6.daddr.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */
+	fl6.daddr = *daddr;
 	if (ipv6_addr_any(&fl6.saddr) && !ipv6_addr_any(&np->saddr))
 		fl6.saddr = np->saddr;
 	fl6.fl6_sport = inet->inet_sport;
@@ -1353,6 +1350,9 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 		}
 	}
 
+	if (ipv6_addr_any(&fl6.daddr))
+		fl6.daddr.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */
+
 	final_p = fl6_update_dst(&fl6, opt, &final);
 	if (final_p)
 		connected = false;
-- 
2.19.1

[PATCH AUTOSEL 4.19 25/83] selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr

[Sasha Levin]

From: Andrey Ignatov <rdna@fb.com>

[ Upstream commit 976b4f3a4646fbf0d189caca25f91f82e4be4b5a ]

Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to
rewrite destination IPv6 = [::] with [::1] (BSD'ism).

Two test cases are added:

1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program
   doesn't touch it.

2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program
   rewrites it with [::].

In both cases [::1] is used by sys_sendmsg code eventually and datagram
is sent successfully for unconnected UDP socket.

Example of relevant output:
  Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS]
  Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_sock_addr.c | 53 ++++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_sock_addr.c b/tools/testing/selftests/bpf/test_sock_addr.c
index aeeb76a54d63..e38f1cb7089d 100644
--- a/tools/testing/selftests/bpf/test_sock_addr.c
+++ b/tools/testing/selftests/bpf/test_sock_addr.c
@@ -44,6 +44,7 @@
 #define SERV6_V4MAPPED_IP	"::ffff:192.168.0.4"
 #define SRC6_IP			"::1"
 #define SRC6_REWRITE_IP		"::6"
+#define WILDCARD6_IP		"::"
 #define SERV6_PORT		6060
 #define SERV6_REWRITE_PORT	6666
 
@@ -85,12 +86,14 @@ static int bind4_prog_load(const struct sock_addr_test *test);
 static int bind6_prog_load(const struct sock_addr_test *test);
 static int connect4_prog_load(const struct sock_addr_test *test);
 static int connect6_prog_load(const struct sock_addr_test *test);
+static int sendmsg_allow_prog_load(const struct sock_addr_test *test);
 static int sendmsg_deny_prog_load(const struct sock_addr_test *test);
 static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test);
 static int sendmsg4_rw_c_prog_load(const struct sock_addr_test *test);
 static int sendmsg6_rw_asm_prog_load(const struct sock_addr_test *test);
 static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test);
 static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test);
+static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test);
 
 static struct sock_addr_test tests[] = {
 	/* bind */
@@ -462,6 +465,34 @@ static struct sock_addr_test tests[] = {
 		SRC6_REWRITE_IP,
 		SYSCALL_ENOTSUPP,
 	},
+	{
+		"sendmsg6: set dst IP = [::] (BSD'ism)",
+		sendmsg6_rw_wildcard_prog_load,
+		BPF_CGROUP_UDP6_SENDMSG,
+		BPF_CGROUP_UDP6_SENDMSG,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		"sendmsg6: preserve dst IP = [::] (BSD'ism)",
+		sendmsg_allow_prog_load,
+		BPF_CGROUP_UDP6_SENDMSG,
+		BPF_CGROUP_UDP6_SENDMSG,
+		AF_INET6,
+		SOCK_DGRAM,
+		WILDCARD6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_PORT,
+		SRC6_IP,
+		SUCCESS,
+	},
 	{
 		"sendmsg6: deny call",
 		sendmsg_deny_prog_load,
@@ -714,16 +745,27 @@ static int connect6_prog_load(const struct sock_addr_test *test)
 	return load_path(test, CONNECT6_PROG_PATH);
 }
 
-static int sendmsg_deny_prog_load(const struct sock_addr_test *test)
+static int sendmsg_ret_only_prog_load(const struct sock_addr_test *test,
+				      int32_t rc)
 {
 	struct bpf_insn insns[] = {
-		/* return 0 */
-		BPF_MOV64_IMM(BPF_REG_0, 0),
+		/* return rc */
+		BPF_MOV64_IMM(BPF_REG_0, rc),
 		BPF_EXIT_INSN(),
 	};
 	return load_insns(test, insns, sizeof(insns) / sizeof(struct bpf_insn));
 }
 
+static int sendmsg_allow_prog_load(const struct sock_addr_test *test)
+{
+	return sendmsg_ret_only_prog_load(test, /*rc*/ 1);
+}
+
+static int sendmsg_deny_prog_load(const struct sock_addr_test *test)
+{
+	return sendmsg_ret_only_prog_load(test, /*rc*/ 0);
+}
+
 static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test)
 {
 	struct sockaddr_in dst4_rw_addr;
@@ -844,6 +886,11 @@ static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test)
 	return sendmsg6_rw_dst_asm_prog_load(test, SERV6_V4MAPPED_IP);
 }
 
+static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test)
+{
+	return sendmsg6_rw_dst_asm_prog_load(test, WILDCARD6_IP);
+}
+
 static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test)
 {
 	return load_path(test, SENDMSG6_PROG_PATH);
-- 
2.19.1

[PATCH AUTOSEL 4.19 26/83] watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem

[Sasha Levin]

From: NeilBrown <neil@brown.name>

[ Upstream commit 3aa8b8bbc142eeaac89891de584535ceb7fce405 ]

These files need
   #include <linux/mod_devicetable.h>
to compile correctly.

Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/mt7621_wdt.c | 1 +
 drivers/watchdog/rt2880_wdt.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
index 5c4a764717c4..81208cd3f4ec 100644
--- a/drivers/watchdog/mt7621_wdt.c
+++ b/drivers/watchdog/mt7621_wdt.c
@@ -17,6 +17,7 @@
 #include <linux/watchdog.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/mach-ralink/ralink_regs.h>
 
diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
index 98967f0a7d10..db7c57d82cfd 100644
--- a/drivers/watchdog/rt2880_wdt.c
+++ b/drivers/watchdog/rt2880_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/watchdog.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/mach-ralink/ralink_regs.h>
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 27/83] net/mlx4: Get rid of page operation after dma_alloc_coherent

[Sasha Levin]

From: Stephen Warren <swarren@nvidia.com>

[ Upstream commit f65e192af35058e5c82da9e90871b472d24912bc ]

This patch solves a crash at the time of mlx4 driver unload or system
shutdown. The crash occurs because dma_alloc_coherent() returns one
value in mlx4_alloc_icm_coherent(), but a different value is passed to
dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because
when allocated, that pointer is passed to sg_set_buf() to record it,
then when freed it is re-calculated by calling
lowmem_page_address(sg_page()) which returns a different value. Solve
this by recording the value that dma_alloc_coherent() returns, and
passing this to dma_free_coherent().

This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get
rid of page operation after dma_alloc_coherent").

Based-on-code-from: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/icm.c | 92 ++++++++++++++----------
 drivers/net/ethernet/mellanox/mlx4/icm.h | 22 +++++-
 2 files changed, 75 insertions(+), 39 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c
index 7262c6310650..288fca826a55 100644
--- a/drivers/net/ethernet/mellanox/mlx4/icm.c
+++ b/drivers/net/ethernet/mellanox/mlx4/icm.c
@@ -57,12 +57,12 @@ static void mlx4_free_icm_pages(struct mlx4_dev *dev, struct mlx4_icm_chunk *chu
 	int i;
 
 	if (chunk->nsg > 0)
-		pci_unmap_sg(dev->persist->pdev, chunk->mem, chunk->npages,
+		pci_unmap_sg(dev->persist->pdev, chunk->sg, chunk->npages,
 			     PCI_DMA_BIDIRECTIONAL);
 
 	for (i = 0; i < chunk->npages; ++i)
-		__free_pages(sg_page(&chunk->mem[i]),
-			     get_order(chunk->mem[i].length));
+		__free_pages(sg_page(&chunk->sg[i]),
+			     get_order(chunk->sg[i].length));
 }
 
 static void mlx4_free_icm_coherent(struct mlx4_dev *dev, struct mlx4_icm_chunk *chunk)
@@ -71,9 +71,9 @@ static void mlx4_free_icm_coherent(struct mlx4_dev *dev, struct mlx4_icm_chunk *
 
 	for (i = 0; i < chunk->npages; ++i)
 		dma_free_coherent(&dev->persist->pdev->dev,
-				  chunk->mem[i].length,
-				  lowmem_page_address(sg_page(&chunk->mem[i])),
-				  sg_dma_address(&chunk->mem[i]));
+				  chunk->buf[i].size,
+				  chunk->buf[i].addr,
+				  chunk->buf[i].dma_addr);
 }
 
 void mlx4_free_icm(struct mlx4_dev *dev, struct mlx4_icm *icm, int coherent)
@@ -111,22 +111,21 @@ static int mlx4_alloc_icm_pages(struct scatterlist *mem, int order,
 	return 0;
 }
 
-static int mlx4_alloc_icm_coherent(struct device *dev, struct scatterlist *mem,
-				    int order, gfp_t gfp_mask)
+static int mlx4_alloc_icm_coherent(struct device *dev, struct mlx4_icm_buf *buf,
+				   int order, gfp_t gfp_mask)
 {
-	void *buf = dma_alloc_coherent(dev, PAGE_SIZE << order,
-				       &sg_dma_address(mem), gfp_mask);
-	if (!buf)
+	buf->addr = dma_alloc_coherent(dev, PAGE_SIZE << order,
+				       &buf->dma_addr, gfp_mask);
+	if (!buf->addr)
 		return -ENOMEM;
 
-	if (offset_in_page(buf)) {
-		dma_free_coherent(dev, PAGE_SIZE << order,
-				  buf, sg_dma_address(mem));
+	if (offset_in_page(buf->addr)) {
+		dma_free_coherent(dev, PAGE_SIZE << order, buf->addr,
+				  buf->dma_addr);
 		return -ENOMEM;
 	}
 
-	sg_set_buf(mem, buf, PAGE_SIZE << order);
-	sg_dma_len(mem) = PAGE_SIZE << order;
+	buf->size = PAGE_SIZE << order;
 	return 0;
 }
 
@@ -159,21 +158,21 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 
 	while (npages > 0) {
 		if (!chunk) {
-			chunk = kmalloc_node(sizeof(*chunk),
+			chunk = kzalloc_node(sizeof(*chunk),
 					     gfp_mask & ~(__GFP_HIGHMEM |
 							  __GFP_NOWARN),
 					     dev->numa_node);
 			if (!chunk) {
-				chunk = kmalloc(sizeof(*chunk),
+				chunk = kzalloc(sizeof(*chunk),
 						gfp_mask & ~(__GFP_HIGHMEM |
 							     __GFP_NOWARN));
 				if (!chunk)
 					goto fail;
 			}
+			chunk->coherent = coherent;
 
-			sg_init_table(chunk->mem, MLX4_ICM_CHUNK_LEN);
-			chunk->npages = 0;
-			chunk->nsg    = 0;
+			if (!coherent)
+				sg_init_table(chunk->sg, MLX4_ICM_CHUNK_LEN);
 			list_add_tail(&chunk->list, &icm->chunk_list);
 		}
 
@@ -186,10 +185,10 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 
 		if (coherent)
 			ret = mlx4_alloc_icm_coherent(&dev->persist->pdev->dev,
-						      &chunk->mem[chunk->npages],
-						      cur_order, mask);
+						&chunk->buf[chunk->npages],
+						cur_order, mask);
 		else
-			ret = mlx4_alloc_icm_pages(&chunk->mem[chunk->npages],
+			ret = mlx4_alloc_icm_pages(&chunk->sg[chunk->npages],
 						   cur_order, mask,
 						   dev->numa_node);
 
@@ -205,7 +204,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 		if (coherent)
 			++chunk->nsg;
 		else if (chunk->npages == MLX4_ICM_CHUNK_LEN) {
-			chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->mem,
+			chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->sg,
 						chunk->npages,
 						PCI_DMA_BIDIRECTIONAL);
 
@@ -220,7 +219,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 	}
 
 	if (!coherent && chunk) {
-		chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->mem,
+		chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->sg,
 					chunk->npages,
 					PCI_DMA_BIDIRECTIONAL);
 
@@ -320,7 +319,7 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj,
 	u64 idx;
 	struct mlx4_icm_chunk *chunk;
 	struct mlx4_icm *icm;
-	struct page *page = NULL;
+	void *addr = NULL;
 
 	if (!table->lowmem)
 		return NULL;
@@ -336,28 +335,49 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj,
 
 	list_for_each_entry(chunk, &icm->chunk_list, list) {
 		for (i = 0; i < chunk->npages; ++i) {
+			dma_addr_t dma_addr;
+			size_t len;
+
+			if (table->coherent) {
+				len = chunk->buf[i].size;
+				dma_addr = chunk->buf[i].dma_addr;
+				addr = chunk->buf[i].addr;
+			} else {
+				struct page *page;
+
+				len = sg_dma_len(&chunk->sg[i]);
+				dma_addr = sg_dma_address(&chunk->sg[i]);
+
+				/* XXX: we should never do this for highmem
+				 * allocation.  This function either needs
+				 * to be split, or the kernel virtual address
+				 * return needs to be made optional.
+				 */
+				page = sg_page(&chunk->sg[i]);
+				addr = lowmem_page_address(page);
+			}
+
 			if (dma_handle && dma_offset >= 0) {
-				if (sg_dma_len(&chunk->mem[i]) > dma_offset)
-					*dma_handle = sg_dma_address(&chunk->mem[i]) +
-						dma_offset;
-				dma_offset -= sg_dma_len(&chunk->mem[i]);
+				if (len > dma_offset)
+					*dma_handle = dma_addr + dma_offset;
+				dma_offset -= len;
 			}
+
 			/*
 			 * DMA mapping can merge pages but not split them,
 			 * so if we found the page, dma_handle has already
 			 * been assigned to.
 			 */
-			if (chunk->mem[i].length > offset) {
-				page = sg_page(&chunk->mem[i]);
+			if (len > offset)
 				goto out;
-			}
-			offset -= chunk->mem[i].length;
+			offset -= len;
 		}
 	}
 
+	addr = NULL;
 out:
 	mutex_unlock(&table->mutex);
-	return page ? lowmem_page_address(page) + offset : NULL;
+	return addr ? addr + offset : NULL;
 }
 
 int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table,
diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h
index c9169a490557..d199874b1c07 100644
--- a/drivers/net/ethernet/mellanox/mlx4/icm.h
+++ b/drivers/net/ethernet/mellanox/mlx4/icm.h
@@ -47,11 +47,21 @@ enum {
 	MLX4_ICM_PAGE_SIZE	= 1 << MLX4_ICM_PAGE_SHIFT,
 };
 
+struct mlx4_icm_buf {
+	void			*addr;
+	size_t			size;
+	dma_addr_t		dma_addr;
+};
+
 struct mlx4_icm_chunk {
 	struct list_head	list;
 	int			npages;
 	int			nsg;
-	struct scatterlist	mem[MLX4_ICM_CHUNK_LEN];
+	bool			coherent;
+	union {
+		struct scatterlist	sg[MLX4_ICM_CHUNK_LEN];
+		struct mlx4_icm_buf	buf[MLX4_ICM_CHUNK_LEN];
+	};
 };
 
 struct mlx4_icm {
@@ -114,12 +124,18 @@ static inline void mlx4_icm_next(struct mlx4_icm_iter *iter)
 
 static inline dma_addr_t mlx4_icm_addr(struct mlx4_icm_iter *iter)
 {
-	return sg_dma_address(&iter->chunk->mem[iter->page_idx]);
+	if (iter->chunk->coherent)
+		return iter->chunk->buf[iter->page_idx].dma_addr;
+	else
+		return sg_dma_address(&iter->chunk->sg[iter->page_idx]);
 }
 
 static inline unsigned long mlx4_icm_size(struct mlx4_icm_iter *iter)
 {
-	return sg_dma_len(&iter->chunk->mem[iter->page_idx]);
+	if (iter->chunk->coherent)
+		return iter->chunk->buf[iter->page_idx].size;
+	else
+		return sg_dma_len(&iter->chunk->sg[iter->page_idx]);
 }
 
 int mlx4_MAP_ICM_AUX(struct mlx4_dev *dev, struct mlx4_icm *icm);
-- 
2.19.1

[PATCH AUTOSEL 4.19 28/83] MIPS: ath79: Enable OF serial ports in the default config

[Sasha Levin]

From: Alban Bedel <albeu@free.fr>

[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]

CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF
boards, enable it in the default config to get a working setup out of
the box.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/configs/ath79_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index 951c4231bdb8..4c47b3fd958b 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -71,6 +71,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AR933X=y
 CONFIG_SERIAL_AR933X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-- 
2.19.1

[PATCH AUTOSEL 4.19 29/83] xprtrdma: Double free in rpcrdma_sendctxs_create()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 6e17f58c486d9554341f70aa5b63b8fbed07b3fa ]

The clean up is handled by the caller, rpcrdma_buffer_create(), so this
call to rpcrdma_sendctxs_destroy() leads to a double free.

Fixes: ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/verbs.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 956a5ea47b58..3d6bf790cf1f 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -872,7 +872,7 @@ static int rpcrdma_sendctxs_create(struct rpcrdma_xprt *r_xprt)
 	for (i = 0; i <= buf->rb_sc_last; i++) {
 		sc = rpcrdma_sendctx_create(&r_xprt->rx_ia);
 		if (!sc)
-			goto out_destroy;
+			return -ENOMEM;
 
 		sc->sc_xprt = r_xprt;
 		buf->rb_sc_ctxs[i] = sc;
@@ -880,10 +880,6 @@ static int rpcrdma_sendctxs_create(struct rpcrdma_xprt *r_xprt)
 	buf->rb_flags = 0;
 
 	return 0;
-
-out_destroy:
-	rpcrdma_sendctxs_destroy(buf);
-	return -ENOMEM;
 }
 
 /* The sendctx queue is not guaranteed to have a size that is a
-- 
2.19.1

[PATCH AUTOSEL 4.19 30/83] mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition

[Sasha Levin]

From: Nir Dotan <nird@mellanox.com>

[ Upstream commit ff0db43cd6c530ff944773ccf48ece55d32d0c22 ]

When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert().
In case of C-TCAM HW insertion error, the opposite action should take
place.
Add error handling case in which the C-TCAM region entry is removed, by
calling cregion->ops->entry_remove().

Fixes: a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c   | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c
index e3c6fe8b1d40..1dcf152b2813 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c
@@ -75,7 +75,15 @@ mlxsw_sp_acl_ctcam_region_entry_insert(struct mlxsw_sp *mlxsw_sp,
 	act_set = mlxsw_afa_block_first_set(rulei->act_block);
 	mlxsw_reg_ptce2_flex_action_set_memcpy_to(ptce2_pl, act_set);
 
-	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptce2), ptce2_pl);
+	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptce2), ptce2_pl);
+	if (err)
+		goto err_ptce2_write;
+
+	return 0;
+
+err_ptce2_write:
+	cregion->ops->entry_remove(cregion, centry);
+	return err;
 }
 
 static void
-- 
2.19.1

[PATCH AUTOSEL 4.19 31/83] selftests: forwarding: Add a test for VLAN deletion

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 4fabf3bf93a194c7fa5288da3e0af37e4b943cf3 ]

Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/net/forwarding/bridge_vlan_aware.sh | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
index d8313d0438b7..04c6431b2bd8 100755
--- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding"
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion"
 NUM_NETIFS=4
 CHECK_TC="yes"
 source lib.sh
@@ -96,6 +96,19 @@ flooding()
 	flood_test $swp2 $h1 $h2
 }
 
+vlan_deletion()
+{
+	# Test that the deletion of a VLAN on a bridge port does not affect
+	# the PVID VLAN
+	log_info "Add and delete a VLAN on bridge port $swp1"
+
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+
+	ping_ipv4
+	ping_ipv6
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.19.1

[PATCH AUTOSEL 4.19 32/83] netfilter: nf_tables: fix leaking object reference count

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit b91d9036883793122cf6575ca4dfbfbdd201a83d ]

There is no code that decreases the reference count of stateful objects
in error path of the nft_add_set_elem(). this causes a leak of reference
count of stateful objects.

Test commands:
   $nft add table ip filter
   $nft add counter ip filter c1
   $nft add map ip filter m1 { type ipv4_addr : counter \;}
   $nft add element ip filter m1 { 1 : c1 }
   $nft add element ip filter m1 { 1 : c1 }
   $nft delete element ip filter m1 { 1 }
   $nft delete counter ip filter c1

Result:
   Error: Could not process rule: Device or resource busy
   delete counter ip filter c1
   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^

At the second 'nft add element ip filter m1 { 1 : c1 }', the reference
count of the 'c1' is increased then it tries to insert into the 'm1'. but
the 'm1' already has same element so it returns -EEXIST.
But it doesn't decrease the reference count of the 'c1' in the error path.
Due to a leak of the reference count of the 'c1', the 'c1' can't be
removed by 'nft delete counter ip filter c1'.

Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index ed9af46720e1..38654730230b 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4439,6 +4439,8 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 err5:
 	kfree(trans);
 err4:
+	if (obj)
+		obj->use--;
 	kfree(elem.priv);
 err3:
 	if (nla[NFTA_SET_ELEM_DATA] != NULL)
-- 
2.19.1

[PATCH AUTOSEL 4.19 33/83] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 72b4a0465f995175a2e22cf4a636bf781f1f28a7 ]

The return code should be check while qla4xxx_copy_from_fwddb_param fails.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla4xxx/ql4_os.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 0e13349dce57..575445c761b4 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -7237,6 +7237,8 @@ static int qla4xxx_sysfs_ddb_tgt_create(struct scsi_qla_host *ha,
 
 	rc = qla4xxx_copy_from_fwddb_param(fnode_sess, fnode_conn,
 					   fw_ddb_entry);
+	if (rc)
+		goto free_sess;
 
 	ql4_printk(KERN_INFO, ha, "%s: sysfs entry %s created\n",
 		   __func__, fnode_sess->dev.kobj.name);
-- 
2.19.1

[PATCH AUTOSEL 4.19 34/83] scsi: isci: initialize shost fully before calling scsi_add_host()

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]

scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the
command size to allocate based on the prot_capabilities. In the isci
driver, scsi_host_set_prot() is called after scsi_add_host() so the command
size gets calculated to be smaller than it needs to be.  Eventually,
scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it
was sized correctly and a buffer overrun may occur.

However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line
size, the mistake can go unnoticed.

The bug was noticed after the struct request size was reduced by commit
9d037ad707ed ("block: remove req->timeout_list")

Which likely reduced the allocated space for the request by an entire cache
line, enough that the overflow could be hit and it caused a panic, on boot,
at:

  RIP: 0010:t10_pi_complete+0x77/0x1c0
  Call Trace:
    <IRQ>
    sd_done+0xf5/0x340
    scsi_finish_command+0xc3/0x120
    blk_done_softirq+0x83/0xb0
    __do_softirq+0xa1/0x2e6
    irq_exit+0xbc/0xd0
    call_function_single_interrupt+0xf/0x20
    </IRQ>

sd_done() would call scsi_prot_sg_count() which reads the number of
entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of
the allocated space it reads a garbage number and erroneously calls
t10_pi_complete().

To prevent this, the calls to scsi_host_set_prot() are moved into
isci_host_alloc() before the call to scsi_add_host(). Out of caution, also
move the similar call to scsi_host_set_guard().

Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support")
Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Intel SCU Linux support <intel-linux-scu@intel.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/isci/init.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 08c7b1e25fe4..dde84f744313 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -588,6 +588,13 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
 	shost->max_lun = ~0;
 	shost->max_cmd_len = MAX_COMMAND_SIZE;
 
+	/* turn on DIF support */
+	scsi_host_set_prot(shost,
+			   SHOST_DIF_TYPE1_PROTECTION |
+			   SHOST_DIF_TYPE2_PROTECTION |
+			   SHOST_DIF_TYPE3_PROTECTION);
+	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
 	err = scsi_add_host(shost, &pdev->dev);
 	if (err)
 		goto err_shost;
@@ -675,13 +682,6 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			goto err_host_alloc;
 		}
 		pci_info->hosts[i] = h;
-
-		/* turn on DIF support */
-		scsi_host_set_prot(to_shost(h),
-				   SHOST_DIF_TYPE1_PROTECTION |
-				   SHOST_DIF_TYPE2_PROTECTION |
-				   SHOST_DIF_TYPE3_PROTECTION);
-		scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
 	}
 
 	err = isci_setup_interrupts(pdev);
-- 
2.19.1

[PATCH AUTOSEL 4.19 35/83] include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR

[Sasha Levin]

From: "Michael S. Tsirkin" <mst@redhat.com>

[ Upstream commit 3e2ffd655cc6a694608d997738989ff5572a8266 ]

Since commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h
mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro
from compiler-gcc - instead it gets the version in
include/linux/compiler.h.  Unfortunately that version doesn't actually
prevent compiler from optimizing out the variable.

Fix up by moving the macro out from compiler-gcc.h to compiler.h.
Compilers without incline asm support will keep working
since it's protected by an ifdef.

Also fix up comments to match reality since we are no longer overriding
any macros.

Build-tested with gcc and clang.

Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive")
Cc: Eli Friedman <efriedma@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/compiler-clang.h | 5 ++---
 include/linux/compiler-gcc.h   | 4 ----
 include/linux/compiler-intel.h | 4 +---
 include/linux/compiler.h       | 4 +++-
 4 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h
index b1ce500fe8b3..d756f2318efe 100644
--- a/include/linux/compiler-clang.h
+++ b/include/linux/compiler-clang.h
@@ -3,9 +3,8 @@
 #error "Please don't include <linux/compiler-clang.h> directly, include <linux/compiler.h> instead."
 #endif
 
-/* Some compiler specific definitions are overwritten here
- * for Clang compiler
- */
+/* Compiler specific definitions for Clang compiler */
+
 #define uninitialized_var(x) x = *(&(x))
 
 /* same as gcc, this was present in clang-2.6 so we can assume it works
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 0242f6eec4ea..a8ff0ca0c321 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -58,10 +58,6 @@
 	(typeof(ptr)) (__ptr + (off));					\
 })
 
-/* Make the optimizer believe the variable can be manipulated arbitrarily. */
-#define OPTIMIZER_HIDE_VAR(var)						\
-	__asm__ ("" : "=r" (var) : "0" (var))
-
 /*
  * A trick to suppress uninitialized variable warning without generating any
  * code
diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h
index 4c7f9befa9f6..f1fc60f10317 100644
--- a/include/linux/compiler-intel.h
+++ b/include/linux/compiler-intel.h
@@ -5,9 +5,7 @@
 
 #ifdef __ECC
 
-/* Some compiler specific definitions are overwritten here
- * for Intel ECC compiler
- */
+/* Compiler specific definitions for Intel ECC compiler */
 
 #include <asm/intrinsics.h>
 
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 681d866efb1e..269d376f5a11 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -158,7 +158,9 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
 #endif
 
 #ifndef OPTIMIZER_HIDE_VAR
-#define OPTIMIZER_HIDE_VAR(var) barrier()
+/* Make the optimizer believe the variable can be manipulated arbitrarily. */
+#define OPTIMIZER_HIDE_VAR(var)						\
+	__asm__ ("" : "=r" (var) : "0" (var))
 #endif
 
 /* Not-quite-unique ID. */
-- 
2.19.1

[PATCH AUTOSEL 4.19 36/83] MIPS: jazz: fix 64bit build

[Sasha Levin]

From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ]

64bit JAZZ builds failed with

  linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`:
  /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration
    of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`?
    [-Werror=implicit-function-declaration]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
                                ^~~~~~~~~
                                CKSEG1ADDR
  /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from
    integer of different size [-Werror=int-to-pointer-cast]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
            ^
  In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0,
                   from /linux-next/include/linux/compiler.h:248,
                   from /linux-next/include/linux/kernel.h:10,
                   from /linux-next/arch/mips/jazz/jazzdma.c:11:
  /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from
    pointer to integer of different size [-Werror=pointer-to-int-cast]
   #define _ACAST32_  (_ATYPE_)(_ATYPE32_) /* widen if necessary */
                               ^
  /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in
    expansion of macro `_ACAST32_`
   #define CPHYSADDR(a)  ((_ACAST32_(a)) & 0x1fffffff)
                           ^~~~~~~~~
  /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of
    macro `CPHYSADDR`
    r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));

Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup
fixes this.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/jazz/jazzdma.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index d31bc2f01208..fb2b6d0b77c3 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -74,14 +74,15 @@ static int __init vdma_init(void)
 						    get_order(VDMA_PGTBL_SIZE));
 	BUG_ON(!pgtbl);
 	dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
-	pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
+	pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
 
 	/*
 	 * Clear the R4030 translation table
 	 */
 	vdma_pgtbl_init();
 
-	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+			  CPHYSADDR((unsigned long)pgtbl));
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 37/83] netfilter: nft_flow_offload: Fix reverse route lookup

[Sasha Levin]

From: wenxu <wenxu@ucloud.cn>

[ Upstream commit a799aea0988ea0d1b1f263e996fdad2f6133c680 ]

Using the following example:

	client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server

The first reply packet (ie. syn+ack) uses an incorrect destination
address for the reverse route lookup since it uses:

	daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;

which is 2.2.2.7 in the scenario that is described above, while this
should be:

	daddr = ct->tuplehash[dir].tuple.src.u3.ip;

that is 10.0.0.7.

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_flow_offload.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
index 5fd4c57c79cc..e0c04851a349 100644
--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -29,10 +29,10 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,
 	memset(&fl, 0, sizeof(fl));
 	switch (nft_pf(pkt)) {
 	case NFPROTO_IPV4:
-		fl.u.ip4.daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;
+		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
 		break;
 	case NFPROTO_IPV6:
-		fl.u.ip6.daddr = ct->tuplehash[!dir].tuple.dst.u3.in6;
+		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
 		break;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 38/83] bpf: correctly set initial window on active Fast Open sender

[Sasha Levin]

From: Yuchung Cheng <ycheng@google.com>

[ Upstream commit 31aa6503a15ba00182ea6dbbf51afb63bf9e851d ]

The existing BPF TCP initial congestion window (TCP_BPF_IW) does not
to work on (active) Fast Open sender. This is because it changes the
(initial) window only if data_segs_out is zero -- but data_segs_out
is also incremented on SYN-data.  This patch fixes the issue by
proerly accounting for SYN-data additionally.

Fixes: fc7478103c84 ("bpf: Adds support for setting initial cwnd")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 8c2411fb2509..3400c7abda13 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4001,7 +4001,7 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 			/* Only some options are supported */
 			switch (optname) {
 			case TCP_BPF_IW:
-				if (val <= 0 || tp->data_segs_out > 0)
+				if (val <= 0 || tp->data_segs_out > tp->syn_data)
 					ret = -EINVAL;
 				else
 					tp->snd_cwnd = val;
-- 
2.19.1

[PATCH AUTOSEL 4.19 39/83] pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 9f51c05dc41a6d69423e3d03d18eb7ab22f9ec19 ]

The problem is that we call this with a spin lock held.
The call tree is:
pvcalls_front_accept() holds bedata->socket_lock.
    -> create_active()
        -> __get_free_pages() uses GFP_KERNEL

The create_active() function is only called from pvcalls_front_accept()
with a spin_lock held, The allocation is not allowed to sleep and
GFP_KERNEL is not sufficient.

This issue was detected by using the Coccinelle software.

v2: Add a function doing the allocations which is called
    outside the lock and passing the allocated data to
    create_active().

v3: Use the matching deallocators i.e., free_page()
    and free_pages(), respectively.

v4: It would be better to pre-populate map (struct sock_mapping),
    rather than introducing one more new struct.

v5: Since allocating the data outside of this call it should also
    be freed outside, when create_active() fails.
    Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and
    use GFP_KERNEL instead.

v6: Drop the superfluous calls.

Suggested-by: Juergen Gross <jgross@suse.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Juergen Gross <jgross@suse.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: xen-devel@lists.xenproject.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-front.c | 81 +++++++++++++++++++++++++++----------
 1 file changed, 59 insertions(+), 22 deletions(-)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 01588582ae66..6357160d466a 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -341,6 +341,39 @@ int pvcalls_front_socket(struct socket *sock)
 	return ret;
 }
 
+static void free_active_ring(struct sock_mapping *map)
+{
+	free_pages((unsigned long)map->active.data.in,
+			map->active.ring->ring_order);
+	free_page((unsigned long)map->active.ring);
+}
+
+static int alloc_active_ring(struct sock_mapping *map)
+{
+	void *bytes;
+
+	map->active.ring = (struct pvcalls_data_intf *)
+		get_zeroed_page(GFP_KERNEL);
+	if (!map->active.ring)
+		goto out;
+
+	map->active.ring->ring_order = PVCALLS_RING_ORDER;
+	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+					PVCALLS_RING_ORDER);
+	if (!bytes)
+		goto out;
+
+	map->active.data.in = bytes;
+	map->active.data.out = bytes +
+		XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
+
+	return 0;
+
+out:
+	free_active_ring(map);
+	return -ENOMEM;
+}
+
 static int create_active(struct sock_mapping *map, int *evtchn)
 {
 	void *bytes;
@@ -349,15 +382,7 @@ static int create_active(struct sock_mapping *map, int *evtchn)
 	*evtchn = -1;
 	init_waitqueue_head(&map->active.inflight_conn_req);
 
-	map->active.ring = (struct pvcalls_data_intf *)
-		__get_free_page(GFP_KERNEL | __GFP_ZERO);
-	if (map->active.ring == NULL)
-		goto out_error;
-	map->active.ring->ring_order = PVCALLS_RING_ORDER;
-	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
-					PVCALLS_RING_ORDER);
-	if (bytes == NULL)
-		goto out_error;
+	bytes = map->active.data.in;
 	for (i = 0; i < (1 << PVCALLS_RING_ORDER); i++)
 		map->active.ring->ref[i] = gnttab_grant_foreign_access(
 			pvcalls_front_dev->otherend_id,
@@ -367,10 +392,6 @@ static int create_active(struct sock_mapping *map, int *evtchn)
 		pvcalls_front_dev->otherend_id,
 		pfn_to_gfn(virt_to_pfn((void *)map->active.ring)), 0);
 
-	map->active.data.in = bytes;
-	map->active.data.out = bytes +
-		XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
-
 	ret = xenbus_alloc_evtchn(pvcalls_front_dev, evtchn);
 	if (ret)
 		goto out_error;
@@ -391,8 +412,6 @@ static int create_active(struct sock_mapping *map, int *evtchn)
 out_error:
 	if (*evtchn >= 0)
 		xenbus_free_evtchn(pvcalls_front_dev, *evtchn);
-	free_pages((unsigned long)map->active.data.in, PVCALLS_RING_ORDER);
-	free_page((unsigned long)map->active.ring);
 	return ret;
 }
 
@@ -412,17 +431,24 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
 		return PTR_ERR(map);
 
 	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+	ret = alloc_active_ring(map);
+	if (ret < 0) {
+		pvcalls_exit_sock(sock);
+		return ret;
+	}
 
 	spin_lock(&bedata->socket_lock);
 	ret = get_request(bedata, &req_id);
 	if (ret < 0) {
 		spin_unlock(&bedata->socket_lock);
+		free_active_ring(map);
 		pvcalls_exit_sock(sock);
 		return ret;
 	}
 	ret = create_active(map, &evtchn);
 	if (ret < 0) {
 		spin_unlock(&bedata->socket_lock);
+		free_active_ring(map);
 		pvcalls_exit_sock(sock);
 		return ret;
 	}
@@ -784,25 +810,36 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
 		}
 	}
 
-	spin_lock(&bedata->socket_lock);
-	ret = get_request(bedata, &req_id);
-	if (ret < 0) {
+	map2 = kzalloc(sizeof(*map2), GFP_KERNEL);
+	if (map2 == NULL) {
 		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
 			  (void *)&map->passive.flags);
-		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit_sock(sock);
+		return -ENOMEM;
+	}
+	ret = alloc_active_ring(map2);
+	if (ret < 0) {
+		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
+				(void *)&map->passive.flags);
+		kfree(map2);
 		pvcalls_exit_sock(sock);
 		return ret;
 	}
-	map2 = kzalloc(sizeof(*map2), GFP_ATOMIC);
-	if (map2 == NULL) {
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
 		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
 			  (void *)&map->passive.flags);
 		spin_unlock(&bedata->socket_lock);
+		free_active_ring(map2);
+		kfree(map2);
 		pvcalls_exit_sock(sock);
-		return -ENOMEM;
+		return ret;
 	}
+
 	ret = create_active(map2, &evtchn);
 	if (ret < 0) {
+		free_active_ring(map2);
 		kfree(map2);
 		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
 			  (void *)&map->passive.flags);
-- 
2.19.1

[PATCH AUTOSEL 4.19 40/83] bpf: fix panic in stack_map_get_build_id() on i386 and arm32

[Sasha Levin]

From: Song Liu <songliubraving@fb.com>

[ Upstream commit beaf3d1901f4ea46fbd5c9d857227d99751de469 ]

As Naresh reported, test_stacktrace_build_id() causes panic on i386 and
arm32 systems. This is caused by page_address() returns NULL in certain
cases.

This patch fixes this error by using kmap_atomic/kunmap_atomic instead
of page_address.

Fixes: 615755a77b24 (" bpf: extend stackmap to save binary_build_id+offset instead of address")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index 8061a439ef18..e50ef5bca421 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -260,7 +260,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma,
 		return -EFAULT;	/* page not mapped */
 
 	ret = -EINVAL;
-	page_addr = page_address(page);
+	page_addr = kmap_atomic(page);
 	ehdr = (Elf32_Ehdr *)page_addr;
 
 	/* compare magic x7f "ELF" */
@@ -276,6 +276,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma,
 	else if (ehdr->e_ident[EI_CLASS] == ELFCLASS64)
 		ret = stack_map_get_build_id_64(page_addr, build_id);
 out:
+	kunmap_atomic(page_addr);
 	put_page(page);
 	return ret;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 41/83] netfilter: nft_flow_offload: fix interaction with vrf slave device

[Sasha Levin]

From: wenxu <wenxu@ucloud.cn>

[ Upstream commit 10f4e765879e514e1ce7f52ed26603047af196e2 ]

In the forward chain, the iif is changed from slave device to master vrf
device. Thus, flow offload does not find a match on the lower slave
device.

This patch uses the cached route, ie. dst->dev, to update the iif and
oif fields in the flow entry.

After this patch, the following example works fine:

 # ip addr add dev eth0 1.1.1.1/24
 # ip addr add dev eth1 10.0.0.1/24
 # ip link add user1 type vrf table 1
 # ip l set user1 up
 # ip l set dev eth0 master user1
 # ip l set dev eth1 master user1

 # nft add table firewall
 # nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; }
 # nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; }
 # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1
 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_flow_table.h | 1 -
 net/netfilter/nf_flow_table_core.c    | 5 +++--
 net/netfilter/nft_flow_offload.c      | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/net/netfilter/nf_flow_table.h b/include/net/netfilter/nf_flow_table.h
index 0e355f4a3d76..0a3de10c6dec 100644
--- a/include/net/netfilter/nf_flow_table.h
+++ b/include/net/netfilter/nf_flow_table.h
@@ -84,7 +84,6 @@ struct flow_offload {
 struct nf_flow_route {
 	struct {
 		struct dst_entry	*dst;
-		int			ifindex;
 	} tuple[FLOW_OFFLOAD_DIR_MAX];
 };
 
diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index d8125616edc7..e1537ace2b90 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -28,6 +28,7 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct,
 {
 	struct flow_offload_tuple *ft = &flow->tuplehash[dir].tuple;
 	struct nf_conntrack_tuple *ctt = &ct->tuplehash[dir].tuple;
+	struct dst_entry *other_dst = route->tuple[!dir].dst;
 	struct dst_entry *dst = route->tuple[dir].dst;
 
 	ft->dir = dir;
@@ -50,8 +51,8 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct,
 	ft->src_port = ctt->src.u.tcp.port;
 	ft->dst_port = ctt->dst.u.tcp.port;
 
-	ft->iifidx = route->tuple[dir].ifindex;
-	ft->oifidx = route->tuple[!dir].ifindex;
+	ft->iifidx = other_dst->dev->ifindex;
+	ft->oifidx = dst->dev->ifindex;
 	ft->dst_cache = dst;
 }
 
diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
index e0c04851a349..4d7cf943fff2 100644
--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -30,9 +30,11 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,
 	switch (nft_pf(pkt)) {
 	case NFPROTO_IPV4:
 		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
+		fl.u.ip4.flowi4_oif = nft_in(pkt)->ifindex;
 		break;
 	case NFPROTO_IPV6:
 		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
+		fl.u.ip6.flowi6_oif = nft_in(pkt)->ifindex;
 		break;
 	}
 
@@ -41,9 +43,7 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,
 		return -ENOENT;
 
 	route->tuple[dir].dst		= this_dst;
-	route->tuple[dir].ifindex	= nft_in(pkt)->ifindex;
 	route->tuple[!dir].dst		= other_dst;
-	route->tuple[!dir].ifindex	= nft_out(pkt)->ifindex;
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 42/83] RDMA/mthca: Clear QP objects during their allocation

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit 9d9f59b4204bc41896c866b3e5856e5b416aa199 ]

As part of audit process to update drivers to use rdma_restrack_add()
ensure that QP objects is cleared before access. Such change fixes the
crash observed with uninitialized non zero sgid attr accessed by
ib_destroy_qp().

CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64
Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib]
RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core]
RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699
RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20
RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf
R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400
R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000
FS:  0000000000000000(0000) GS:ffff8d1bf7ac0000(0000)
knlGS:0000000000000000
Trace:
 ib_destroy_qp+0xc9/0x240 [ib_core]
 ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib]
 process_one_work+0x1a1/0x3a0
 worker_thread+0x30/0x380
 ? pwq_unbound_release_workfn+0xd0/0xd0
 kthread+0x112/0x130
 ? kthread_create_worker_on_cpu+0x70/0x70
 ret_from_fork+0x22/0x40

Reported-by: Alexander Murashkin <AlexanderMurashkin@msn.com>
Tested-by: Alexander Murashkin <AlexanderMurashkin@msn.com>
Fixes: 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mthca/mthca_provider.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 0d3473b4596e..21f4239022c7 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -533,7 +533,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd,
 	{
 		struct mthca_ucontext *context;
 
-		qp = kmalloc(sizeof *qp, GFP_KERNEL);
+		qp = kzalloc(sizeof(*qp), GFP_KERNEL);
 		if (!qp)
 			return ERR_PTR(-ENOMEM);
 
@@ -599,7 +599,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd,
 		if (pd->uobject)
 			return ERR_PTR(-EINVAL);
 
-		qp = kmalloc(sizeof (struct mthca_sqp), GFP_KERNEL);
+		qp = kzalloc(sizeof(struct mthca_sqp), GFP_KERNEL);
 		if (!qp)
 			return ERR_PTR(-ENOMEM);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 43/83] powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit fb0bdec51a4901b7dd088de0a1e365e1b9f5cd21 ]

Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer
dereference") moved the loading of r6 earlier in the code. As some
functions are called inbetween, r6 needs to be loaded again with the
address of swapper_pg_dir in order to set PTE pointers for
the Abatron BDI.

Fixes: 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/head_8xx.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 81d4574d1f37..9fd2ff28b8ff 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -919,11 +919,12 @@ start_here:
 
 	/* set up the PTE pointers for the Abatron bdiGDB.
 	*/
-	tovirt(r6,r6)
 	lis	r5, abatron_pteptrs@h
 	ori	r5, r5, abatron_pteptrs@l
 	stw	r5, 0xf0(0)	/* Must match your Abatron config file */
 	tophys(r5,r5)
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
 	stw	r6, 0(r5)
 
 /* Now turn on the MMU for real! */
-- 
2.19.1

[PATCH AUTOSEL 4.19 44/83] acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()

[Sasha Levin]

From: Tony Luck <tony.luck@intel.com>

[ Upstream commit 0919871ac37fdcf46c7657da0f1742efe096b399 ]

Possible race accessing memdev structures after dropping the
mutex. Dan Williams says this could race against another thread
that is doing:

 # echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind

Reported-by: Jane Chu <jane.chu@oracle.com>
Fixes: 23222f8f8dce ("acpi, nfit: Add function to look up nvdimm...")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/nfit/core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index ea59c01ce8db..f530d3541242 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -719,6 +719,7 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)
 	struct acpi_nfit_memory_map *memdev;
 	struct acpi_nfit_desc *acpi_desc;
 	struct nfit_mem *nfit_mem;
+	u16 physical_id;
 
 	mutex_lock(&acpi_desc_lock);
 	list_for_each_entry(acpi_desc, &acpi_descs, list) {
@@ -726,10 +727,11 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)
 		list_for_each_entry(nfit_mem, &acpi_desc->dimms, list) {
 			memdev = __to_nfit_memdev(nfit_mem);
 			if (memdev->device_handle == device_handle) {
+				*flags = memdev->flags;
+				physical_id = memdev->physical_id;
 				mutex_unlock(&acpi_desc->init_mutex);
 				mutex_unlock(&acpi_desc_lock);
-				*flags = memdev->flags;
-				return memdev->physical_id;
+				return physical_id;
 			}
 		}
 		mutex_unlock(&acpi_desc->init_mutex);
-- 
2.19.1

[PATCH AUTOSEL 4.19 45/83] net: stmmac: Fix PCI module removal leak

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit 6dea7e1881fd86b80da64e476ac398008daed857 ]

Since commit b7d0f08e9129, the enable / disable of PCI device is not
managed which will result in IO regions not being automatically unmapped.
As regions continue mapped it is currently not possible to remove and
then probe again the PCI module of stmmac.

Fix this by manually unmapping regions on remove callback.

Changes from v1:
- Fix build error

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index c54a50dbd5ac..d819e8eaba12 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -299,7 +299,17 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
  */
 static void stmmac_pci_remove(struct pci_dev *pdev)
 {
+	int i;
+
 	stmmac_dvr_remove(&pdev->dev);
+
+	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+		if (pci_resource_len(pdev, i) == 0)
+			continue;
+		pcim_iounmap_regions(pdev, BIT(i));
+		break;
+	}
+
 	pci_disable_device(pdev);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 46/83] net: stmmac: dwxgmac2: Only clear interrupts that are active

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit fcc509eb10ff4794641e6ad3082118287a750d0a ]

In DMA interrupt handler we were clearing all interrupts status, even
the ones that were not active. Fix this and only clear the active
interrupts.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 20909036e002..1c3930527444 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -260,6 +260,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
 				  struct stmmac_extra_stats *x, u32 chan)
 {
 	u32 intr_status = readl(ioaddr + XGMAC_DMA_CH_STATUS(chan));
+	u32 intr_en = readl(ioaddr + XGMAC_DMA_CH_INT_EN(chan));
 	int ret = 0;
 
 	/* ABNORMAL interrupts */
@@ -279,8 +280,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
 		x->normal_irq_n++;
 
 		if (likely(intr_status & XGMAC_RI)) {
-			u32 value = readl(ioaddr + XGMAC_DMA_CH_INT_EN(chan));
-			if (likely(value & XGMAC_RIE)) {
+			if (likely(intr_en & XGMAC_RIE)) {
 				x->rx_normal_irq_n++;
 				ret |= handle_rx;
 			}
@@ -292,7 +292,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
 	}
 
 	/* Clear interrupts */
-	writel(~0x0, ioaddr + XGMAC_DMA_CH_STATUS(chan));
+	writel(intr_en & intr_status, ioaddr + XGMAC_DMA_CH_STATUS(chan));
 
 	return ret;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 47/83] net: stmmac: Check if CBS is supported before configuring

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit 0650d4017f4d2eee67230a02285a7ae5204240c2 ]

Check if CBS is currently supported before trying to configure it in HW.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 531294f4978b..58ea18af9813 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -301,6 +301,8 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
 	/* Queue 0 is not AVB capable */
 	if (queue <= 0 || queue >= tx_queues_count)
 		return -EINVAL;
+	if (!priv->dma_cap.av)
+		return -EOPNOTSUPP;
 	if (priv->speed != SPEED_100 && priv->speed != SPEED_1000)
 		return -EOPNOTSUPP;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 48/83] net: stmmac: Fix the logic of checking if RX Watchdog must be enabled

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit 3b5094665e273c4a2a99f7f5f16977c0f1e19095 ]

RX Watchdog can be disabled by platform definitions but currently we are
initializing the descriptors before checking if Watchdog must be
disabled or not.

Fix this by checking earlier if user wants Watchdog disabled or not.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 2103b865726a..24ae244c2ee3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4191,6 +4191,18 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 			return ret;
 	}
 
+	/* Rx Watchdog is available in the COREs newer than the 3.40.
+	 * In some case, for example on bugged HW this feature
+	 * has to be disable and this can be done by passing the
+	 * riwt_off field from the platform.
+	 */
+	if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
+	    (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
+		priv->use_riwt = 1;
+		dev_info(priv->device,
+			 "Enable RX Mitigation via HW Watchdog Timer\n");
+	}
+
 	return 0;
 }
 
@@ -4323,18 +4335,6 @@ int stmmac_dvr_probe(struct device *device,
 	if (flow_ctrl)
 		priv->flow_ctrl = FLOW_AUTO;	/* RX/TX pause on */
 
-	/* Rx Watchdog is available in the COREs newer than the 3.40.
-	 * In some case, for example on bugged HW this feature
-	 * has to be disable and this can be done by passing the
-	 * riwt_off field from the platform.
-	 */
-	if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
-	    (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
-		priv->use_riwt = 1;
-		dev_info(priv->device,
-			 "Enable RX Mitigation via HW Watchdog Timer\n");
-	}
-
 	/* Setup channels NAPI */
 	maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 49/83] net: stmmac: Prevent RX starvation in stmmac_napi_poll()

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit fa0be0a43f101888ac677dba31b590963eafeaa1 ]

Currently, TX is given a budget which is consumed by stmmac_tx_clean()
and stmmac_rx() is given the remaining non-consumed budget.

This is wrong and in case we are sending a large number of packets this
can starve RX because remaining budget will be low.

Let's give always the same budget for RX and TX clean.

While at it, check if we missed any interrupts while we were in NAPI
callback by looking at DMA interrupt status.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 27 ++++++++++---------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 24ae244c2ee3..123b74e25ed8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3522,27 +3522,28 @@ static int stmmac_napi_poll(struct napi_struct *napi, int budget)
 	struct stmmac_channel *ch =
 		container_of(napi, struct stmmac_channel, napi);
 	struct stmmac_priv *priv = ch->priv_data;
-	int work_done = 0, work_rem = budget;
+	int work_done, rx_done = 0, tx_done = 0;
 	u32 chan = ch->index;
 
 	priv->xstats.napi_poll++;
 
-	if (ch->has_tx) {
-		int done = stmmac_tx_clean(priv, work_rem, chan);
+	if (ch->has_tx)
+		tx_done = stmmac_tx_clean(priv, budget, chan);
+	if (ch->has_rx)
+		rx_done = stmmac_rx(priv, budget, chan);
 
-		work_done += done;
-		work_rem -= done;
-	}
-
-	if (ch->has_rx) {
-		int done = stmmac_rx(priv, work_rem, chan);
+	work_done = max(rx_done, tx_done);
+	work_done = min(work_done, budget);
 
-		work_done += done;
-		work_rem -= done;
-	}
+	if (work_done < budget && napi_complete_done(napi, work_done)) {
+		int stat;
 
-	if (work_done < budget && napi_complete_done(napi, work_done))
 		stmmac_enable_dma_irq(priv, priv->ioaddr, chan);
+		stat = stmmac_dma_interrupt_status(priv, priv->ioaddr,
+						   &priv->xstats, chan);
+		if (stat && napi_reschedule(napi))
+			stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
+	}
 
 	return work_done;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 50/83] isdn: i4l: isdn_tty: Fix some concurrency double-free bugs

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 2ff33d6637393fe9348357285931811b76e1402f ]

The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be
concurrently executed.

isdn_tty_tiocmset
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

isdn_tty_set_termios
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

Thus, some concurrency double-free bugs may occur.

These possible bugs are found by a static tool written by myself and
my manual code review.

To fix these possible bugs, the mutex lock "modem_info_mutex" used in
isdn_tty_tiocmset() is added in isdn_tty_set_termios().

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/i4l/isdn_tty.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b730037a0e2d..9cff667b2d24 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1456,15 +1456,19 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
 
+	mutex_lock(&modem_info_mutex);
 	if (!old_termios)
 		isdn_tty_change_speed(info);
 	else {
 		if (tty->termios.c_cflag == old_termios->c_cflag &&
 		    tty->termios.c_ispeed == old_termios->c_ispeed &&
-		    tty->termios.c_ospeed == old_termios->c_ospeed)
+		    tty->termios.c_ospeed == old_termios->c_ospeed) {
+			mutex_unlock(&modem_info_mutex);
 			return;
+		}
 		isdn_tty_change_speed(info);
 	}
+	mutex_unlock(&modem_info_mutex);
 }
 
 /*
-- 
2.19.1

[PATCH AUTOSEL 4.19 51/83] scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes

[Sasha Levin]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit a94a2572b97744d3a35a1996df0e5cf6b2461a4a ]

Currently there is one cmd timeout timer and one qfull timer for each udev,
and whenever any new command is coming in we will update the cmd timer or
qfull timer. For some corner cases the timers are always working only for
the ringbuffer's and full queue's newest cmd. That's to say the timer won't
be fired even if one cmd has been stuck for a very long time and the
deadline is reached.

This fix will keep the cmd/qfull timers to be pended for the oldest cmd in
ringbuffer and full queue, and will update them with the next cmd's
deadline only when the old cmd's deadline is reached or removed from the
ringbuffer and full queue.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_user.c | 88 +++++++++++++++++++++----------
 1 file changed, 61 insertions(+), 27 deletions(-)

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 9cd404acdb82..ac7620120491 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -148,7 +148,7 @@ struct tcmu_dev {
 	size_t ring_size;
 
 	struct mutex cmdr_lock;
-	struct list_head cmdr_queue;
+	struct list_head qfull_queue;
 
 	uint32_t dbi_max;
 	uint32_t dbi_thresh;
@@ -159,6 +159,7 @@ struct tcmu_dev {
 
 	struct timer_list cmd_timer;
 	unsigned int cmd_time_out;
+	struct list_head inflight_queue;
 
 	struct timer_list qfull_timer;
 	int qfull_time_out;
@@ -179,7 +180,7 @@ struct tcmu_dev {
 struct tcmu_cmd {
 	struct se_cmd *se_cmd;
 	struct tcmu_dev *tcmu_dev;
-	struct list_head cmdr_queue_entry;
+	struct list_head queue_entry;
 
 	uint16_t cmd_id;
 
@@ -192,6 +193,7 @@ struct tcmu_cmd {
 	unsigned long deadline;
 
 #define TCMU_CMD_BIT_EXPIRED 0
+#define TCMU_CMD_BIT_INFLIGHT 1
 	unsigned long flags;
 };
 /*
@@ -586,7 +588,7 @@ static struct tcmu_cmd *tcmu_alloc_cmd(struct se_cmd *se_cmd)
 	if (!tcmu_cmd)
 		return NULL;
 
-	INIT_LIST_HEAD(&tcmu_cmd->cmdr_queue_entry);
+	INIT_LIST_HEAD(&tcmu_cmd->queue_entry);
 	tcmu_cmd->se_cmd = se_cmd;
 	tcmu_cmd->tcmu_dev = udev;
 
@@ -915,11 +917,13 @@ static int tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo,
 		return 0;
 
 	tcmu_cmd->deadline = round_jiffies_up(jiffies + msecs_to_jiffies(tmo));
-	mod_timer(timer, tcmu_cmd->deadline);
+	if (!timer_pending(timer))
+		mod_timer(timer, tcmu_cmd->deadline);
+
 	return 0;
 }
 
-static int add_to_cmdr_queue(struct tcmu_cmd *tcmu_cmd)
+static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd)
 {
 	struct tcmu_dev *udev = tcmu_cmd->tcmu_dev;
 	unsigned int tmo;
@@ -942,7 +946,7 @@ static int add_to_cmdr_queue(struct tcmu_cmd *tcmu_cmd)
 	if (ret)
 		return ret;
 
-	list_add_tail(&tcmu_cmd->cmdr_queue_entry, &udev->cmdr_queue);
+	list_add_tail(&tcmu_cmd->queue_entry, &udev->qfull_queue);
 	pr_debug("adding cmd %u on dev %s to ring space wait queue\n",
 		 tcmu_cmd->cmd_id, udev->name);
 	return 0;
@@ -999,7 +1003,7 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err)
 	base_command_size = tcmu_cmd_get_base_cmd_size(tcmu_cmd->dbi_cnt);
 	command_size = tcmu_cmd_get_cmd_size(tcmu_cmd, base_command_size);
 
-	if (!list_empty(&udev->cmdr_queue))
+	if (!list_empty(&udev->qfull_queue))
 		goto queue;
 
 	mb = udev->mb_addr;
@@ -1096,13 +1100,16 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err)
 	UPDATE_HEAD(mb->cmd_head, command_size, udev->cmdr_size);
 	tcmu_flush_dcache_range(mb, sizeof(*mb));
 
+	list_add_tail(&tcmu_cmd->queue_entry, &udev->inflight_queue);
+	set_bit(TCMU_CMD_BIT_INFLIGHT, &tcmu_cmd->flags);
+
 	/* TODO: only if FLUSH and FUA? */
 	uio_event_notify(&udev->uio_info);
 
 	return 0;
 
 queue:
-	if (add_to_cmdr_queue(tcmu_cmd)) {
+	if (add_to_qfull_queue(tcmu_cmd)) {
 		*scsi_err = TCM_OUT_OF_RESOURCES;
 		return -1;
 	}
@@ -1145,6 +1152,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
 	if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags))
 		goto out;
 
+	list_del_init(&cmd->queue_entry);
+
 	tcmu_cmd_reset_dbi_cur(cmd);
 
 	if (entry->hdr.uflags & TCMU_UFLAG_UNKNOWN_OP) {
@@ -1194,9 +1203,29 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
 	tcmu_free_cmd(cmd);
 }
 
+static void tcmu_set_next_deadline(struct list_head *queue,
+				   struct timer_list *timer)
+{
+	struct tcmu_cmd *tcmu_cmd, *tmp_cmd;
+	unsigned long deadline = 0;
+
+	list_for_each_entry_safe(tcmu_cmd, tmp_cmd, queue, queue_entry) {
+		if (!time_after(jiffies, tcmu_cmd->deadline)) {
+			deadline = tcmu_cmd->deadline;
+			break;
+		}
+	}
+
+	if (deadline)
+		mod_timer(timer, deadline);
+	else
+		del_timer(timer);
+}
+
 static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 {
 	struct tcmu_mailbox *mb;
+	struct tcmu_cmd *cmd;
 	int handled = 0;
 
 	if (test_bit(TCMU_DEV_BIT_BROKEN, &udev->flags)) {
@@ -1210,7 +1239,6 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 	while (udev->cmdr_last_cleaned != READ_ONCE(mb->cmd_tail)) {
 
 		struct tcmu_cmd_entry *entry = (void *) mb + CMDR_OFF + udev->cmdr_last_cleaned;
-		struct tcmu_cmd *cmd;
 
 		tcmu_flush_dcache_range(entry, sizeof(*entry));
 
@@ -1243,7 +1271,7 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 		/* no more pending commands */
 		del_timer(&udev->cmd_timer);
 
-		if (list_empty(&udev->cmdr_queue)) {
+		if (list_empty(&udev->qfull_queue)) {
 			/*
 			 * no more pending or waiting commands so try to
 			 * reclaim blocks if needed.
@@ -1252,6 +1280,8 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 			    tcmu_global_max_blocks)
 				schedule_delayed_work(&tcmu_unmap_work, 0);
 		}
+	} else if (udev->cmd_time_out) {
+		tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer);
 	}
 
 	return handled;
@@ -1271,7 +1301,7 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data)
 	if (!time_after(jiffies, cmd->deadline))
 		return 0;
 
-	is_running = list_empty(&cmd->cmdr_queue_entry);
+	is_running = test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags);
 	se_cmd = cmd->se_cmd;
 
 	if (is_running) {
@@ -1288,12 +1318,11 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data)
 		 */
 		scsi_status = SAM_STAT_CHECK_CONDITION;
 	} else {
-		list_del_init(&cmd->cmdr_queue_entry);
-
 		idr_remove(&udev->commands, id);
 		tcmu_free_cmd(cmd);
 		scsi_status = SAM_STAT_TASK_SET_FULL;
 	}
+	list_del_init(&cmd->queue_entry);
 
 	pr_debug("Timing out cmd %u on dev %s that is %s.\n",
 		 id, udev->name, is_running ? "inflight" : "queued");
@@ -1372,7 +1401,8 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)
 
 	INIT_LIST_HEAD(&udev->node);
 	INIT_LIST_HEAD(&udev->timedout_entry);
-	INIT_LIST_HEAD(&udev->cmdr_queue);
+	INIT_LIST_HEAD(&udev->qfull_queue);
+	INIT_LIST_HEAD(&udev->inflight_queue);
 	idr_init(&udev->commands);
 
 	timer_setup(&udev->qfull_timer, tcmu_qfull_timedout, 0);
@@ -1383,7 +1413,7 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)
 	return &udev->se_dev;
 }
 
-static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)
+static bool run_qfull_queue(struct tcmu_dev *udev, bool fail)
 {
 	struct tcmu_cmd *tcmu_cmd, *tmp_cmd;
 	LIST_HEAD(cmds);
@@ -1391,15 +1421,15 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)
 	sense_reason_t scsi_ret;
 	int ret;
 
-	if (list_empty(&udev->cmdr_queue))
+	if (list_empty(&udev->qfull_queue))
 		return true;
 
 	pr_debug("running %s's cmdr queue forcefail %d\n", udev->name, fail);
 
-	list_splice_init(&udev->cmdr_queue, &cmds);
+	list_splice_init(&udev->qfull_queue, &cmds);
 
-	list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, cmdr_queue_entry) {
-		list_del_init(&tcmu_cmd->cmdr_queue_entry);
+	list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, queue_entry) {
+		list_del_init(&tcmu_cmd->queue_entry);
 
 	        pr_debug("removing cmd %u on dev %s from queue\n",
 		         tcmu_cmd->cmd_id, udev->name);
@@ -1437,14 +1467,13 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)
 			 * cmd was requeued, so just put all cmds back in
 			 * the queue
 			 */
-			list_splice_tail(&cmds, &udev->cmdr_queue);
+			list_splice_tail(&cmds, &udev->qfull_queue);
 			drained = false;
-			goto done;
+			break;
 		}
 	}
-	if (list_empty(&udev->cmdr_queue))
-		del_timer(&udev->qfull_timer);
-done:
+
+	tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer);
 	return drained;
 }
 
@@ -1454,7 +1483,7 @@ static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on)
 
 	mutex_lock(&udev->cmdr_lock);
 	tcmu_handle_completions(udev);
-	run_cmdr_queue(udev, false);
+	run_qfull_queue(udev, false);
 	mutex_unlock(&udev->cmdr_lock);
 
 	return 0;
@@ -1982,7 +2011,7 @@ static void tcmu_block_dev(struct tcmu_dev *udev)
 	/* complete IO that has executed successfully */
 	tcmu_handle_completions(udev);
 	/* fail IO waiting to be queued */
-	run_cmdr_queue(udev, true);
+	run_qfull_queue(udev, true);
 
 unlock:
 	mutex_unlock(&udev->cmdr_lock);
@@ -1997,7 +2026,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 	mutex_lock(&udev->cmdr_lock);
 
 	idr_for_each_entry(&udev->commands, cmd, i) {
-		if (!list_empty(&cmd->cmdr_queue_entry))
+		if (!test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags))
 			continue;
 
 		pr_debug("removing cmd %u on dev %s from ring (is expired %d)\n",
@@ -2006,6 +2035,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 
 		idr_remove(&udev->commands, i);
 		if (!test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) {
+			list_del_init(&cmd->queue_entry);
 			if (err_level == 1) {
 				/*
 				 * Userspace was not able to start the
@@ -2666,6 +2696,10 @@ static void check_timedout_devices(void)
 
 		mutex_lock(&udev->cmdr_lock);
 		idr_for_each(&udev->commands, tcmu_check_expired_cmd, NULL);
+
+		tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer);
+		tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer);
+
 		mutex_unlock(&udev->cmdr_lock);
 
 		spin_lock_bh(&timed_out_udevs_lock);
-- 
2.19.1

[PATCH AUTOSEL 4.19 52/83] scsi: ufs: Fix system suspend status

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit ce9e7bce43526626f7cffe2e657953997870197e ]

hba->is_sys_suspended is set after successful system suspend but
not clear after successful system resume.

According to current behavior, hba->is_sys_suspended will not be set if
host is runtime-suspended but not system-suspended. Thus we shall aligh the
same policy: clear this flag even if host remains runtime-suspended after
ufshcd_system_resume is successfully returned.

Simply fix this flag to correct host status logs.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 12ddb5928a73..6e80dfe4fa97 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7768,6 +7768,8 @@ int ufshcd_system_resume(struct ufs_hba *hba)
 	trace_ufshcd_system_resume(dev_name(hba->dev), ret,
 		ktime_to_us(ktime_sub(ktime_get(), start)),
 		hba->curr_dev_pwr_mode, hba->uic_link_state);
+	if (!ret)
+		hba->is_sys_suspended = false;
 	return ret;
 }
 EXPORT_SYMBOL(ufshcd_system_resume);
-- 
2.19.1

[PATCH AUTOSEL 4.19 53/83] scsi: qedi: Add ep_state for login completion on un-reachable targets

[Sasha Levin]

From: Manish Rangankar <mrangankar@marvell.com>

[ Upstream commit 34a2ce887668db9dda4b56e6f155c49ac13f3e54 ]

When the driver finds invalid destination MAC for the first un-reachable
target, and before completes the PATH_REQ operation, set new ep_state to
OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper
open-iscsi layer is notified to complete the login process on the first
un-reachable target and thus proceed login to other reachable targets.

Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedi/qedi_iscsi.c | 3 +++
 drivers/scsi/qedi/qedi_iscsi.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 2f0a4f2c5ff8..d4821b9dea45 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -954,6 +954,7 @@ static int qedi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
 
 	qedi_ep = ep->dd_data;
 	if (qedi_ep->state == EP_STATE_IDLE ||
+	    qedi_ep->state == EP_STATE_OFLDCONN_NONE ||
 	    qedi_ep->state == EP_STATE_OFLDCONN_FAILED)
 		return -1;
 
@@ -1036,6 +1037,7 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 
 	switch (qedi_ep->state) {
 	case EP_STATE_OFLDCONN_START:
+	case EP_STATE_OFLDCONN_NONE:
 		goto ep_release_conn;
 	case EP_STATE_OFLDCONN_FAILED:
 			break;
@@ -1226,6 +1228,7 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data)
 
 	if (!is_valid_ether_addr(&path_data->mac_addr[0])) {
 		QEDI_NOTICE(&qedi->dbg_ctx, "dst mac NOT VALID\n");
+		qedi_ep->state = EP_STATE_OFLDCONN_NONE;
 		ret = -EIO;
 		goto set_path_exit;
 	}
diff --git a/drivers/scsi/qedi/qedi_iscsi.h b/drivers/scsi/qedi/qedi_iscsi.h
index 11260776212f..892d70d54553 100644
--- a/drivers/scsi/qedi/qedi_iscsi.h
+++ b/drivers/scsi/qedi/qedi_iscsi.h
@@ -59,6 +59,7 @@ enum {
 	EP_STATE_OFLDCONN_FAILED        = 0x2000,
 	EP_STATE_CONNECT_FAILED         = 0x4000,
 	EP_STATE_DISCONN_TIMEDOUT       = 0x8000,
+	EP_STATE_OFLDCONN_NONE          = 0x10000,
 };
 
 struct qedi_conn;
-- 
2.19.1

[PATCH AUTOSEL 4.19 54/83] scsi: ufs: Fix geometry descriptor size

[Sasha Levin]

From: Avri Altman <avri.altman@wdc.com>

[ Upstream commit 9be9db9f78f52ef03ee90063730cb9d730e7032b ]

Albeit we no longer rely on those hard-coded descriptor sizes, we still use
them as our defaults, so better get it right. While adding its sysfs
entries, we forgot to update the geometry descriptor size. It is 0x48
according to UFS2.1, and wasn't changed in UFS3.0.

[mkp: typo]

Fixes: c720c091222e (scsi: ufs: sysfs: geometry descriptor)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 14e5bf7af0bb..c3bcaaec0fc5 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -195,7 +195,7 @@ enum ufs_desc_def_size {
 	QUERY_DESC_CONFIGURATION_DEF_SIZE	= 0x90,
 	QUERY_DESC_UNIT_DEF_SIZE		= 0x23,
 	QUERY_DESC_INTERCONNECT_DEF_SIZE	= 0x06,
-	QUERY_DESC_GEOMETRY_DEF_SIZE		= 0x44,
+	QUERY_DESC_GEOMETRY_DEF_SIZE		= 0x48,
 	QUERY_DESC_POWER_DEF_SIZE		= 0x62,
 	QUERY_DESC_HEALTH_DEF_SIZE		= 0x25,
 };
-- 
2.19.1

[PATCH AUTOSEL 4.19 55/83] scsi: cxgb4i: add wait_for_completion()

[Sasha Levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit 9e8f1c79831424d30c0e3df068be7f4a244157c9 ]

In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for
cmd completion, this can create race conditions, to avoid this add
wait_for_completion().

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c |  9 ++++-----
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 28 ++++++++++++++++++++--------
 drivers/scsi/cxgbi/libcxgbi.c      |  7 ++++---
 drivers/scsi/cxgbi/libcxgbi.h      |  5 +++--
 4 files changed, 31 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index bf07735275a4..0fc382cb977b 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -1144,7 +1144,7 @@ static void ddp_clear_map(struct cxgbi_device *cdev, struct cxgbi_ppm *ppm,
 }
 
 static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,
-				       unsigned int tid, int pg_idx, bool reply)
+				unsigned int tid, int pg_idx)
 {
 	struct sk_buff *skb = alloc_wr(sizeof(struct cpl_set_tcb_field), 0,
 					GFP_KERNEL);
@@ -1160,7 +1160,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
-	req->reply = V_NO_REPLY(reply ? 0 : 1);
+	req->reply = V_NO_REPLY(1);
 	req->cpu_idx = 0;
 	req->word = htons(31);
 	req->mask = cpu_to_be64(0xF0000000);
@@ -1177,11 +1177,10 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,
  * @tid: connection id
  * @hcrc: header digest enabled
  * @dcrc: data digest enabled
- * @reply: request reply from h/w
  * set up the iscsi digest settings for a connection identified by tid
  */
 static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
-			     int hcrc, int dcrc, int reply)
+				 int hcrc, int dcrc)
 {
 	struct sk_buff *skb = alloc_wr(sizeof(struct cpl_set_tcb_field), 0,
 					GFP_KERNEL);
@@ -1197,7 +1196,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
-	req->reply = V_NO_REPLY(reply ? 0 : 1);
+	req->reply = V_NO_REPLY(1);
 	req->cpu_idx = 0;
 	req->word = htons(31);
 	req->mask = cpu_to_be64(0x0F000000);
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index 211da1d5a869..689d6c813a50 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -1517,16 +1517,22 @@ static void do_set_tcb_rpl(struct cxgbi_device *cdev, struct sk_buff *skb)
 	struct cxgbi_sock *csk;
 
 	csk = lookup_tid(t, tid);
-	if (!csk)
+	if (!csk) {
 		pr_err("can't find conn. for tid %u.\n", tid);
+		return;
+	}
 
 	log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK,
 		"csk 0x%p,%u,%lx,%u, status 0x%x.\n",
 		csk, csk->state, csk->flags, csk->tid, rpl->status);
 
-	if (rpl->status != CPL_ERR_NONE)
+	if (rpl->status != CPL_ERR_NONE) {
 		pr_err("csk 0x%p,%u, SET_TCB_RPL status %u.\n",
 			csk, tid, rpl->status);
+		csk->err = -EINVAL;
+	}
+
+	complete(&csk->cmpl);
 
 	__kfree_skb(skb);
 }
@@ -1903,7 +1909,7 @@ static int ddp_set_map(struct cxgbi_ppm *ppm, struct cxgbi_sock *csk,
 }
 
 static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid,
-				int pg_idx, bool reply)
+				int pg_idx)
 {
 	struct sk_buff *skb;
 	struct cpl_set_tcb_field *req;
@@ -1919,7 +1925,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	INIT_TP_WR(req, csk->tid);
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, csk->tid));
-	req->reply_ctrl = htons(NO_REPLY_V(reply) | QUEUENO_V(csk->rss_qid));
+	req->reply_ctrl = htons(NO_REPLY_V(0) | QUEUENO_V(csk->rss_qid));
 	req->word_cookie = htons(0);
 	req->mask = cpu_to_be64(0x3 << 8);
 	req->val = cpu_to_be64(pg_idx << 8);
@@ -1928,12 +1934,15 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid,
 	log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK,
 		"csk 0x%p, tid 0x%x, pg_idx %u.\n", csk, csk->tid, pg_idx);
 
+	reinit_completion(&csk->cmpl);
 	cxgb4_ofld_send(csk->cdev->ports[csk->port_id], skb);
-	return 0;
+	wait_for_completion(&csk->cmpl);
+
+	return csk->err;
 }
 
 static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
-				 int hcrc, int dcrc, int reply)
+				 int hcrc, int dcrc)
 {
 	struct sk_buff *skb;
 	struct cpl_set_tcb_field *req;
@@ -1951,7 +1960,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	INIT_TP_WR(req, tid);
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
-	req->reply_ctrl = htons(NO_REPLY_V(reply) | QUEUENO_V(csk->rss_qid));
+	req->reply_ctrl = htons(NO_REPLY_V(0) | QUEUENO_V(csk->rss_qid));
 	req->word_cookie = htons(0);
 	req->mask = cpu_to_be64(0x3 << 4);
 	req->val = cpu_to_be64(((hcrc ? ULP_CRC_HEADER : 0) |
@@ -1961,8 +1970,11 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
 	log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK,
 		"csk 0x%p, tid 0x%x, crc %d,%d.\n", csk, csk->tid, hcrc, dcrc);
 
+	reinit_completion(&csk->cmpl);
 	cxgb4_ofld_send(csk->cdev->ports[csk->port_id], skb);
-	return 0;
+	wait_for_completion(&csk->cmpl);
+
+	return csk->err;
 }
 
 static struct cxgbi_ppm *cdev2ppm(struct cxgbi_device *cdev)
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 3f3af5e74a07..f2c561ca731a 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -573,6 +573,7 @@ static struct cxgbi_sock *cxgbi_sock_create(struct cxgbi_device *cdev)
 	skb_queue_head_init(&csk->receive_queue);
 	skb_queue_head_init(&csk->write_queue);
 	timer_setup(&csk->retry_timer, NULL, 0);
+	init_completion(&csk->cmpl);
 	rwlock_init(&csk->callback_lock);
 	csk->cdev = cdev;
 	csk->flags = 0;
@@ -2252,14 +2253,14 @@ int cxgbi_set_conn_param(struct iscsi_cls_conn *cls_conn,
 		if (!err && conn->hdrdgst_en)
 			err = csk->cdev->csk_ddp_setup_digest(csk, csk->tid,
 							conn->hdrdgst_en,
-							conn->datadgst_en, 0);
+							conn->datadgst_en);
 		break;
 	case ISCSI_PARAM_DATADGST_EN:
 		err = iscsi_set_param(cls_conn, param, buf, buflen);
 		if (!err && conn->datadgst_en)
 			err = csk->cdev->csk_ddp_setup_digest(csk, csk->tid,
 							conn->hdrdgst_en,
-							conn->datadgst_en, 0);
+							conn->datadgst_en);
 		break;
 	case ISCSI_PARAM_MAX_R2T:
 		return iscsi_tcp_set_max_r2t(conn, buf);
@@ -2385,7 +2386,7 @@ int cxgbi_bind_conn(struct iscsi_cls_session *cls_session,
 
 	ppm = csk->cdev->cdev2ppm(csk->cdev);
 	err = csk->cdev->csk_ddp_setup_pgidx(csk, csk->tid,
-					     ppm->tformat.pgsz_idx_dflt, 0);
+					     ppm->tformat.pgsz_idx_dflt);
 	if (err < 0)
 		return err;
 
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index dcb190e75343..3bf7414a75e5 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -146,6 +146,7 @@ struct cxgbi_sock {
 	struct sk_buff_head receive_queue;
 	struct sk_buff_head write_queue;
 	struct timer_list retry_timer;
+	struct completion cmpl;
 	int err;
 	rwlock_t callback_lock;
 	void *user_data;
@@ -487,9 +488,9 @@ struct cxgbi_device {
 				  struct cxgbi_ppm *,
 				  struct cxgbi_task_tag_info *);
 	int (*csk_ddp_setup_digest)(struct cxgbi_sock *,
-				unsigned int, int, int, int);
+				    unsigned int, int, int);
 	int (*csk_ddp_setup_pgidx)(struct cxgbi_sock *,
-				unsigned int, int, bool);
+				   unsigned int, int);
 
 	void (*csk_release_offload_resources)(struct cxgbi_sock *);
 	int (*csk_rx_pdu_ready)(struct cxgbi_sock *, struct sk_buff *);
-- 
2.19.1

[PATCH AUTOSEL 4.19 56/83] netfilter: nft_flow_offload: fix checking method of conntrack helper

[Sasha Levin]

From: Henry Yen <henry.yen@mediatek.com>

[ Upstream commit 2314e879747e82896f51cce4488f6a00f3e1af7b ]

This patch uses nfct_help() to detect whether an established connection
needs conntrack helper instead of using test_bit(IPS_HELPER_BIT,
&ct->status).

The reason is that IPS_HELPER_BIT is only set when using explicit CT
target.

However, in the case that a device enables conntrack helper via command
"echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of
IPS_HELPER_BIT will not present any change, and consequently it loses
the checking ability in the context.

Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: John Crispin <john@phrozen.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_flow_offload.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
index 4d7cf943fff2..436cc14cfc59 100644
--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -12,6 +12,7 @@
 #include <net/netfilter/nf_conntrack_core.h>
 #include <linux/netfilter/nf_conntrack_common.h>
 #include <net/netfilter/nf_flow_table.h>
+#include <net/netfilter/nf_conntrack_helper.h>
 
 struct nft_flow_offload {
 	struct nft_flowtable	*flowtable;
@@ -66,6 +67,7 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
 {
 	struct nft_flow_offload *priv = nft_expr_priv(expr);
 	struct nf_flowtable *flowtable = &priv->flowtable->data;
+	const struct nf_conn_help *help;
 	enum ip_conntrack_info ctinfo;
 	struct nf_flow_route route;
 	struct flow_offload *flow;
@@ -88,7 +90,8 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
 		goto out;
 	}
 
-	if (test_bit(IPS_HELPER_BIT, &ct->status))
+	help = nfct_help(ct);
+	if (help)
 		goto out;
 
 	if (ctinfo == IP_CT_NEW ||
-- 
2.19.1

[PATCH AUTOSEL 4.19 57/83] always clear the X2APIC_ENABLE bit for PV guest

[Sasha Levin]

From: Talons Lee <xin.li@citrix.com>

[ Upstream commit 5268c8f39e0efef81af2aaed160272d9eb507beb ]

Commit e657fcc clears cpu capability bit instead of using fake cpuid
value, the EXTD should always be off for PV guest without depending
on cpuid value. So remove the cpuid check in xen_read_msr_safe() to
always clear the X2APIC_ENABLE bit.

Signed-off-by: Talons Lee <xin.li@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/enlighten_pv.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 52a7c3faee0c..782f98b332f0 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -899,10 +899,7 @@ static u64 xen_read_msr_safe(unsigned int msr, int *err)
 	val = native_read_msr_safe(msr, err);
 	switch (msr) {
 	case MSR_IA32_APICBASE:
-#ifdef CONFIG_X86_X2APIC
-		if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31))))
-#endif
-			val &= ~X2APIC_ENABLE;
+		val &= ~X2APIC_ENABLE;
 		break;
 	}
 	return val;
-- 
2.19.1

[PATCH AUTOSEL 4.19 58/83] drm/meson: add missing of_node_put

[Sasha Levin]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit f672b93e4a0a4947d2e1103ed8780e01e13eadb6 ]

Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.

An of_node_put is also needed when meson_probe_remote completes.  This was
present at the recursive call, but not in the call from meson_drv_probe.

The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
    when != true e == NULL
    when != of_node_put(e)
    when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547372691-28324-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_drv.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index bf5f294f172f..611ac340fb28 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -368,8 +368,10 @@ static int meson_probe_remote(struct platform_device *pdev,
 		remote_node = of_graph_get_remote_port_parent(ep);
 		if (!remote_node ||
 		    remote_node == parent || /* Ignore parent endpoint */
-		    !of_device_is_available(remote_node))
+		    !of_device_is_available(remote_node)) {
+			of_node_put(remote_node);
 			continue;
+		}
 
 		count += meson_probe_remote(pdev, match, remote, remote_node);
 
@@ -388,10 +390,13 @@ static int meson_drv_probe(struct platform_device *pdev)
 
 	for_each_endpoint_of_node(np, ep) {
 		remote = of_graph_get_remote_port_parent(ep);
-		if (!remote || !of_device_is_available(remote))
+		if (!remote || !of_device_is_available(remote)) {
+			of_node_put(remote);
 			continue;
+		}
 
 		count += meson_probe_remote(pdev, &match, np, remote);
+		of_node_put(remote);
 	}
 
 	if (count && !match)
-- 
2.19.1

[PATCH AUTOSEL 4.19 59/83] drm/amdkfd: Don't assign dGPUs to APU topology devices

[Sasha Levin]

From: Felix Kuehling <Felix.Kuehling@amd.com>

[ Upstream commit bbdf514fe5648566b0754476cbcb92ac3422dde2 ]

dGPUs need their own topology devices. Don't assign them to APU topology
devices with CPU cores.

Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Elias Konstantinidis <ekondis@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
index 80f5db4ef75f..0805c423a5ce 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -1072,8 +1072,6 @@ static uint32_t kfd_generate_gpu_id(struct kfd_dev *gpu)
  *		the GPU device is not already present in the topology device
  *		list then return NULL. This means a new topology device has to
  *		be created for this GPU.
- * TODO: Rather than assiging @gpu to first topology device withtout
- *		gpu attached, it will better to have more stringent check.
  */
 static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu)
 {
@@ -1081,12 +1079,20 @@ static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu)
 	struct kfd_topology_device *out_dev = NULL;
 
 	down_write(&topology_lock);
-	list_for_each_entry(dev, &topology_device_list, list)
+	list_for_each_entry(dev, &topology_device_list, list) {
+		/* Discrete GPUs need their own topology device list
+		 * entries. Don't assign them to CPU/APU nodes.
+		 */
+		if (!gpu->device_info->needs_iommu_device &&
+		    dev->node_props.cpu_cores_count)
+			continue;
+
 		if (!dev->gpu && (dev->node_props.simd_count > 0)) {
 			dev->gpu = gpu;
 			out_dev = dev;
 			break;
 		}
+	}
 	up_write(&topology_lock);
 	return out_dev;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 60/83] drm/amd/display: fix PME notification not working in RV desktop

[Sasha Levin]

From: Charlene Liu <charlene.liu@amd.com>

[ Upstream commit 20300db4aec5ba5edf6f0ad6f7111a51fbea7e10 ]

[Why]
PPLIB not receive the PME when unplug.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c    | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 0941f3c689bc..5f9492d8f0aa 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1000,7 +1000,7 @@ void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx)
 
 		pipe_ctx->stream_res.audio->funcs->az_enable(pipe_ctx->stream_res.audio);
 
-		if (num_audio == 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
+		if (num_audio >= 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
 			/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
 			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
 		/* un-mute audio */
@@ -1017,6 +1017,8 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)
 	pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control(
 			pipe_ctx->stream_res.stream_enc, true);
 	if (pipe_ctx->stream_res.audio) {
+		struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu;
+
 		if (option != KEEP_ACQUIRED_RESOURCE ||
 				!dc->debug.az_endpoint_mute_only) {
 			/*only disalbe az_endpoint if power down or free*/
@@ -1036,6 +1038,9 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)
 			update_audio_usage(&dc->current_state->res_ctx, dc->res_pool, pipe_ctx->stream_res.audio, false);
 			pipe_ctx->stream_res.audio = NULL;
 		}
+		if (pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
+			/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
+			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
 
 		/* TODO: notify audio driver for if audio modes list changed
 		 * add audio mode list change flag */
-- 
2.19.1

[PATCH AUTOSEL 4.19 61/83] vhost: return EINVAL if iovecs size does not match the message size

[Sasha Levin]

From: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>

[ Upstream commit 74ad7419489ddade8044e3c9ab064ad656520306 ]

We've failed to copy and process vhost_iotlb_msg so let userspace at
least know about it. For instance before these patch the code below runs
without any error:

int main()
{
  struct vhost_msg msg;
  struct iovec iov;
  int fd;

  fd = open("/dev/vhost-net", O_RDWR);
  if (fd == -1) {
    perror("open");
    return 1;
  }

  iov.iov_base = &msg;
  iov.iov_len = sizeof(msg)-4;

  if (writev(fd, &iov,1) == -1) {
    perror("writev");
    return 1;
  }

  return 0;
}

Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vhost.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index cf82e7266397..7a07b0e86644 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1035,8 +1035,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,
 	int type, ret;
 
 	ret = copy_from_iter(&type, sizeof(type), from);
-	if (ret != sizeof(type))
+	if (ret != sizeof(type)) {
+		ret = -EINVAL;
 		goto done;
+	}
 
 	switch (type) {
 	case VHOST_IOTLB_MSG:
@@ -1055,8 +1057,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,
 
 	iov_iter_advance(from, offset);
 	ret = copy_from_iter(&msg, sizeof(msg), from);
-	if (ret != sizeof(msg))
+	if (ret != sizeof(msg)) {
+		ret = -EINVAL;
 		goto done;
+	}
 	if (vhost_process_iotlb_msg(dev, &msg)) {
 		ret = -EFAULT;
 		goto done;
-- 
2.19.1

[PATCH AUTOSEL 4.19 62/83] drm/sun4i: backend: add missing of_node_puts

[Sasha Levin]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit 4bb0e6d7258213d4893c2c876712fbba40e712fe ]

The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.

Remote and port also have augmented reference counts, so drop them
on each iteration and at the end of the function, respectively.
Remote is only used for the address it contains, not for the
contents of that address, so the reference count can be dropped
immediately.

The semantic patch that fixes the first part of this problem is
as follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
+  of_node_put(child);
?  break;
   ...
}
... when != child
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-5-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_backend.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index d7950b52a1fd..e30b1f5b9d91 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -717,17 +717,18 @@ static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
 		remote = of_graph_get_remote_port_parent(ep);
 		if (!remote)
 			continue;
+		of_node_put(remote);
 
 		/* does this node match any registered engines? */
 		list_for_each_entry(frontend, &drv->frontend_list, list) {
 			if (remote == frontend->node) {
-				of_node_put(remote);
 				of_node_put(port);
+				of_node_put(ep);
 				return frontend;
 			}
 		}
 	}
-
+	of_node_put(port);
 	return ERR_PTR(-EINVAL);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 63/83] pvcalls-front: fix potential null dereference

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit b4711098066f1cf808d4dc11a1a842860a3292fe ]

 static checker warning:
    drivers/xen/pvcalls-front.c:373 alloc_active_ring()
    error: we previously assumed 'map->active.ring' could be null
           (see line 357)

drivers/xen/pvcalls-front.c
    351 static int alloc_active_ring(struct sock_mapping *map)
    352 {
    353     void *bytes;
    354
    355     map->active.ring = (struct pvcalls_data_intf *)
    356         get_zeroed_page(GFP_KERNEL);
    357     if (!map->active.ring)
                    ^^^^^^^^^^^^^^^^^
Check

    358         goto out;
    359
    360     map->active.ring->ring_order = PVCALLS_RING_ORDER;
    361     bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
    362                     PVCALLS_RING_ORDER);
    363     if (!bytes)
    364         goto out;
    365
    366     map->active.data.in = bytes;
    367     map->active.data.out = bytes +
    368         XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
    369
    370     return 0;
    371
    372 out:
--> 373     free_active_ring(map);
                                 ^^^
Add null check on map->active.ring before dereferencing it to avoid
any NULL pointer dereferences.

Fixes: 9f51c05dc41a ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Juergen Gross <jgross@suse.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Dan Carpenter <dan.carpenter@oracle.com>
CC: xen-devel@lists.xenproject.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-front.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 6357160d466a..91da7e44d5d4 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -343,6 +343,9 @@ int pvcalls_front_socket(struct socket *sock)
 
 static void free_active_ring(struct sock_mapping *map)
 {
+	if (!map->active.ring)
+		return;
+
 	free_pages((unsigned long)map->active.data.in,
 			map->active.ring->ring_order);
 	free_page((unsigned long)map->active.ring);
-- 
2.19.1

[PATCH AUTOSEL 4.19 64/83] selftests: tc-testing: drop test on missing tunnel key id

[Sasha Levin]

From: Davide Caratti <dcaratti@redhat.com>

[ Upstream commit e413615502a3324daba038f529932ba9a5248af0 ]

After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:

 ba4e - Add tunnel_key set action with missing mandatory id parameter

because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../tc-tests/actions/tunnel_key.json          | 29 -------------------
 1 file changed, 29 deletions(-)

diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
index 10b2d894e436..af5e99d27229 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
@@ -81,35 +81,6 @@
 	    ]
         ]
     },
-    {
-        "id": "ba4e",
-        "name": "Add tunnel_key set action with missing mandatory id parameter",
-        "category": [
-            "actions",
-            "tunnel_key"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action tunnel_key",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action tunnel_key",
-        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 10.10.10.1.*dst_ip 20.20.20.2",
-        "matchCount": "0",
-        "teardown": [
-	    [
-		"$TC actions flush action tunnel_key",
-		0,
-		1,
-		255
-	    ]
-        ]
-    },
     {
         "id": "a5e0",
         "name": "Add tunnel_key set action with invalid src_ip parameter",
-- 
2.19.1

[PATCH AUTOSEL 4.19 65/83] selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified

[Sasha Levin]

From: Davide Caratti <dcaratti@redhat.com>

[ Upstream commit 5216bd77798e2ed773ecd45f3f368dcaec63e5dd ]

After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:

 7a88 - Add tunnel_key action with cookie parameter

Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/tc-testing/tc-tests/actions/tunnel_key.json       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
index af5e99d27229..e7e15a7336b6 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
@@ -605,7 +605,7 @@
         "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 7 index 4 cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action tunnel_key index 4",
-        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*dst_port 0.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action tunnel_key"
-- 
2.19.1

[PATCH AUTOSEL 4.19 66/83] selftests: tc-testing: fix parsing of ife type

[Sasha Levin]

From: Davide Caratti <dcaratti@redhat.com>

[ Upstream commit 91fa038d9446b5bf5ea80822790af7dd9bcbb5a2 ]

In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
specifier for the ife type changed from 0x%X to %#llX, causing systematic
failures in the following TDC test cases:

 7682 - Create valid ife encode action with mark and pass control
 ef47 - Create valid ife encode action with mark and pipe control
 df43 - Create valid ife encode action with mark and continue control
 e4cf - Create valid ife encode action with mark and drop control
 ccba - Create valid ife encode action with mark and reclassify control
 a1cf - Create valid ife encode action with mark and jump control
 cb3d - Create valid ife encode action with mark value at 32-bit maximum
 95ed - Create valid ife encode action with prio and pass control
 aa17 - Create valid ife encode action with prio and pipe control
 74c7 - Create valid ife encode action with prio and continue control
 7a97 - Create valid ife encode action with prio and drop control
 f66b - Create valid ife encode action with prio and reclassify control
 3056 - Create valid ife encode action with prio and jump control
 7dd3 - Create valid ife encode action with prio value at 32-bit maximum
 05bb - Create valid ife encode action with tcindex and pass control
 ce65 - Create valid ife encode action with tcindex and pipe control
 09cd - Create valid ife encode action with tcindex and continue control
 8eb5 - Create valid ife encode action with tcindex and continue control
 451a - Create valid ife encode action with tcindex and drop control
 d76c - Create valid ife encode action with tcindex and reclassify control
 e731 - Create valid ife encode action with tcindex and jump control
 b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
 2a9c - Create valid ife encode action with mac src parameter
 cf5c - Create valid ife encode action with mac dst parameter
 2353 - Create valid ife encode action with mac src and mac dst parameters
 552c - Create valid ife encode action with mark and type parameters
 0421 - Create valid ife encode action with prio and type parameters
 4017 - Create valid ife encode action with tcindex and type parameters
 fac3 - Create valid ife encode action with index at 32-bit maximnum
 7c25 - Create valid ife decode action with pass control
 dccb - Create valid ife decode action with pipe control
 7bb9 - Create valid ife decode action with continue control
 d9ad - Create valid ife decode action with drop control
 219f - Create valid ife decode action with reclassify control
 8f44 - Create valid ife decode action with jump control
 b330 - Create ife encode action with cookie

Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../tc-testing/tc-tests/actions/ife.json      | 88 +++++++++----------
 1 file changed, 44 insertions(+), 44 deletions(-)

diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
index 637ea0219617..0da3545cabdb 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
@@ -17,7 +17,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -41,7 +41,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 10 pipe index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -65,7 +65,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark continue index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*allow mark.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*allow mark.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -89,7 +89,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 789 drop index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*use mark 789.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*use mark 789.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -113,7 +113,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 656768 reclassify index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 656768.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 656768.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -137,7 +137,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 65 jump 1 index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0xED3E.*use mark 65.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0[xX]ED3E.*use mark 65.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -161,7 +161,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295 reclassify index 90",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 90",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 4294967295.*index 90",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 4294967295.*index 90",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -185,7 +185,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295999 pipe index 90",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 90",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark 4294967295999.*index 90",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark 4294967295999.*index 90",
         "matchCount": "0",
         "teardown": []
     },
@@ -207,7 +207,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio pass index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow prio.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow prio.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -231,7 +231,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 7 pipe index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 7.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 7.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -255,7 +255,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 3 continue index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use prio 3.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use prio 3.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -279,7 +279,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio drop index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow prio.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow prio.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -303,7 +303,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 998877 reclassify index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 998877.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 998877.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -327,7 +327,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 998877 jump 10 index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0xED3E.*use prio 998877.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0[xX]ED3E.*use prio 998877.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -351,7 +351,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 4294967295 reclassify index 99",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 99",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 4294967295.*index 99",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 4294967295.*index 99",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -375,7 +375,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 4294967298 pipe index 99",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 99",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 4294967298.*index 99",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 4294967298.*index 99",
         "matchCount": "0",
         "teardown": []
     },
@@ -397,7 +397,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -421,7 +421,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 111 pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 111.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 111.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -445,7 +445,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -469,7 +469,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -493,7 +493,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex drop index 77",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 77",
-        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow tcindex.*index 77",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow tcindex.*index 77",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -517,7 +517,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex reclassify index 77",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 77",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*allow tcindex.*index 77",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*allow tcindex.*index 77",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -541,7 +541,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex jump 999 index 77",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 77",
-        "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0xED3E.*allow tcindex.*index 77",
+        "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0[xX]ED3E.*allow tcindex.*index 77",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -565,7 +565,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 65535 pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*use tcindex 65535.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*use tcindex 65535.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -589,7 +589,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 65539 pipe index 1",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 65539.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 65539.*index 1",
         "matchCount": "0",
         "teardown": []
     },
@@ -611,7 +611,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark src 00:11:22:33:44:55 pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow mark src 00:11:22:33:44:55.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow mark src 00:11:22:33:44:55.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -635,7 +635,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 9876 dst 00:11:22:33:44:55 reclassify index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -659,7 +659,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex src 00:aa:bb:cc:dd:ee dst 00:11:22:33:44:55 pass index 11",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 11",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -683,7 +683,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 7 type 0xfefe pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xFEFE.*use mark 7.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]FEFE.*use mark 7.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -707,7 +707,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 444 type 0xabba pipe index 21",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 21",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xABBA.*use prio 444.*index 21",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ABBA.*use prio 444.*index 21",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -731,7 +731,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 5000 type 0xabcd reclassify index 21",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 21",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xABCD.*use tcindex 5000.*index 21",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ABCD.*use tcindex 5000.*index 21",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -739,7 +739,7 @@
     },
     {
         "id": "fac3",
-        "name": "Create valid ife encode action with index at 32-bit maximnum",
+        "name": "Create valid ife encode action with index at 32-bit maximum",
         "category": [
             "actions",
             "ife"
@@ -755,7 +755,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 4294967295",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -779,7 +779,7 @@
         "cmdUnderTest": "$TC actions add action ife decode pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action pass.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action pass.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -803,7 +803,7 @@
         "cmdUnderTest": "$TC actions add action ife decode pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -827,7 +827,7 @@
         "cmdUnderTest": "$TC actions add action ife decode continue index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action continue.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action continue.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -851,7 +851,7 @@
         "cmdUnderTest": "$TC actions add action ife decode drop index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action drop.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action drop.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -875,7 +875,7 @@
         "cmdUnderTest": "$TC actions add action ife decode reclassify index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -899,7 +899,7 @@
         "cmdUnderTest": "$TC actions add action ife decode jump 10 index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -923,7 +923,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295999",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4294967295999",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295999",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295999",
         "matchCount": "0",
         "teardown": []
     },
@@ -945,7 +945,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark kuka index 4",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0xED3E.*allow mark.*index 4",
+        "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0[xX]ED3E.*allow mark.*index 4",
         "matchCount": "0",
         "teardown": []
     },
@@ -967,7 +967,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio pipe index 4 cookie aabbccddeeff112233445566778800a1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1",
         "matchCount": "1",
         "teardown": [
            "$TC actions flush action ife"
@@ -991,7 +991,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow foo pipe index 4",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow foo.*index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow foo.*index 4",
         "matchCount": "0",
         "teardown": []
     },
@@ -1013,7 +1013,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio type 70000 pipe index 4",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0x11170.*allow prio.*index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]11170.*allow prio.*index 4",
         "matchCount": "0",
         "teardown": []
     },
-- 
2.19.1

[PATCH AUTOSEL 4.19 67/83] PCI: Fix __initdata issue with "pci=disable_acs_redir" parameter

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit d2fd6e81912a665993b24dcdc1c1384a42a54f7e ]

The disable_acs_redir parameter stores a pointer to the string passed to
pci_setup().  However, the string passed to PCI setup is actually a
temporary copy allocated in static __initdata memory.  After init, once the
memory is freed, it is no longer valid to reference this pointer.

This bug was noticed in v5.0-rc1 after a change in commit c5eb1190074c
("PCI / PM: Allow runtime PM without callback functions") caused
pci_disable_acs_redir() to be called during shutdown which manifested
as an unable to handle kernel paging request at:

  RIP: 0010:pci_enable_acs+0x3f/0x1e0
  Call Trace:
     pci_restore_state.part.44+0x159/0x3c0
     pci_restore_standard_config+0x33/0x40
     pci_pm_runtime_resume+0x2b/0xd0
     ? pci_restore_standard_config+0x40/0x40
     __rpm_callback+0xbc/0x1b0
     rpm_callback+0x1f/0x70
     ? pci_restore_standard_config+0x40/0x40
      rpm_resume+0x4f9/0x710
     ? pci_conf1_read+0xb6/0xf0
     ? pci_conf1_write+0xb2/0xe0
     __pm_runtime_resume+0x47/0x70
     pci_device_shutdown+0x1e/0x60
     device_shutdown+0x14a/0x1f0
     kernel_restart+0xe/0x50
     __do_sys_reboot+0x1ee/0x210
     ? __fput+0x144/0x1d0
     do_writev+0x5e/0xf0
     ? do_writev+0x5e/0xf0
     do_syscall_64+0x48/0xf0
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

It was also likely possible to trigger this bug when hotplugging PCI
devices.

To fix this, instead of storing a pointer, we use kstrdup() to copy the
disable_acs_redir_param to its own buffer which will never be freed.

Fixes: aaca43fda742 ("PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support")
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index afc4680c584f..7eb1549cea81 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -6113,7 +6113,8 @@ static int __init pci_setup(char *str)
 			} else if (!strncmp(str, "pcie_scan_all", 13)) {
 				pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
 			} else if (!strncmp(str, "disable_acs_redir=", 18)) {
-				disable_acs_redir_param = str + 18;
+				disable_acs_redir_param =
+					kstrdup(str + 18, GFP_KERNEL);
 			} else {
 				printk(KERN_ERR "PCI: Unknown option `%s'\n",
 						str);
-- 
2.19.1

[PATCH AUTOSEL 4.19 68/83] afs: Don't set vnode->cb_s_break in afs_validate()

[Sasha Levin]

From: Marc Dionne <marc.dionne@auristor.com>

[ Upstream commit 4882a27cec24319d10f95e978ecc80050e3e3e15 ]

A cb_interest record is not necessarily attached to the vnode on entry to
afs_validate(), which can cause an oops when we try to bring the vnode's
cb_s_break up to date in the default case (ie. no current callback promise
and the vnode has not been deleted).

Fix this by simply removing the line, as vnode->cb_s_break will be set when
needed by afs_register_server_cb_interest() when we next get a callback
promise from RPC call.

The oops looks something like:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
    ...
    RIP: 0010:afs_validate+0x66/0x250 [kafs]
    ...
    Call Trace:
     afs_d_revalidate+0x8d/0x340 [kafs]
     ? __d_lookup+0x61/0x150
     lookup_dcache+0x44/0x70
     ? lookup_dcache+0x44/0x70
     __lookup_hash+0x24/0xa0
     do_unlinkat+0x11d/0x2c0
     __x64_sys_unlink+0x23/0x30
     do_syscall_64+0x4d/0xf0
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: ae3b7361dc0e ("afs: Fix validation/callback interaction")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/inode.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 071075d775a9..26aa2d111a28 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -411,7 +411,6 @@ int afs_validate(struct afs_vnode *vnode, struct key *key)
 	} else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) {
 		valid = true;
 	} else {
-		vnode->cb_s_break = vnode->cb_interest->server->cb_s_break;
 		vnode->cb_v_break = vnode->volume->cb_v_break;
 		valid = false;
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 69/83] afs: Fix key refcounting in file locking code

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 59d49076ae3e6912e6d7df2fd68e2337f3d02036 ]

Fix the refcounting of the authentication keys in the file locking code.
The vnode->lock_key member points to a key on which it expects to be
holding a ref, but it isn't always given an extra ref, however.

Fixes: 0fafdc9f888b ("afs: Fix file locking")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/flock.c | 4 ++--
 fs/afs/inode.c | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/afs/flock.c b/fs/afs/flock.c
index dc62d15a964b..1bb300ef362b 100644
--- a/fs/afs/flock.c
+++ b/fs/afs/flock.c
@@ -208,7 +208,7 @@ void afs_lock_work(struct work_struct *work)
 		/* The new front of the queue now owns the state variables. */
 		next = list_entry(vnode->pending_locks.next,
 				  struct file_lock, fl_u.afs.link);
-		vnode->lock_key = afs_file_key(next->fl_file);
+		vnode->lock_key = key_get(afs_file_key(next->fl_file));
 		vnode->lock_type = (next->fl_type == F_RDLCK) ? AFS_LOCK_READ : AFS_LOCK_WRITE;
 		vnode->lock_state = AFS_VNODE_LOCK_WAITING_FOR_CB;
 		goto again;
@@ -413,7 +413,7 @@ static void afs_dequeue_lock(struct afs_vnode *vnode, struct file_lock *fl)
 	/* The new front of the queue now owns the state variables. */
 	next = list_entry(vnode->pending_locks.next,
 			  struct file_lock, fl_u.afs.link);
-	vnode->lock_key = afs_file_key(next->fl_file);
+	vnode->lock_key = key_get(afs_file_key(next->fl_file));
 	vnode->lock_type = (next->fl_type == F_RDLCK) ? AFS_LOCK_READ : AFS_LOCK_WRITE;
 	vnode->lock_state = AFS_VNODE_LOCK_WAITING_FOR_CB;
 	afs_lock_may_be_available(vnode);
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 26aa2d111a28..0726e40db0f8 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -542,6 +542,8 @@ void afs_evict_inode(struct inode *inode)
 #endif
 
 	afs_put_permits(rcu_access_pointer(vnode->permit_cache));
+	key_put(vnode->lock_key);
+	vnode->lock_key = NULL;
 	_leave("");
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 70/83] bpf: don't assume build-id length is always 20 bytes

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit 0b698005a9d11c0e91141ec11a2c4918a129f703 ]

Build-id length is not fixed to 20, it can be (`man ld` /--build-id):
  * 128-bit (uuid)
  * 160-bit (sha1)
  * any length specified in ld --build-id=0xhexstring

To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids,
assume that build-id is somewhere in the range of 1 .. 20.
Set the remaining bytes to zero.

v2:
* don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)",
  we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter
  this 'if' condition

Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index e50ef5bca421..98ad9dc3587a 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -180,11 +180,14 @@ static inline int stack_map_parse_build_id(void *page_addr,
 
 		if (nhdr->n_type == BPF_BUILD_ID &&
 		    nhdr->n_namesz == sizeof("GNU") &&
-		    nhdr->n_descsz == BPF_BUILD_ID_SIZE) {
+		    nhdr->n_descsz > 0 &&
+		    nhdr->n_descsz <= BPF_BUILD_ID_SIZE) {
 			memcpy(build_id,
 			       note_start + note_offs +
 			       ALIGN(sizeof("GNU"), 4) + sizeof(Elf32_Nhdr),
-			       BPF_BUILD_ID_SIZE);
+			       nhdr->n_descsz);
+			memset(build_id + nhdr->n_descsz, 0,
+			       BPF_BUILD_ID_SIZE - nhdr->n_descsz);
 			return 0;
 		}
 		new_offs = note_offs + sizeof(Elf32_Nhdr) +
-- 
2.19.1

[PATCH AUTOSEL 4.19 71/83] bpf: zero out build_id for BPF_STACK_BUILD_ID_IP

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit 4af396ae4836c4ecab61e975b8e61270c551894d ]

When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset,
make sure that build_id field is empty. Since we are using percpu
free list, there is a possibility that we might reuse some previous
bpf_stack_build_id with non-zero build_id.

Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index 98ad9dc3587a..6a32933cae4f 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -314,6 +314,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
 		for (i = 0; i < trace_nr; i++) {
 			id_offs[i].status = BPF_STACK_BUILD_ID_IP;
 			id_offs[i].ip = ips[i];
+			memset(id_offs[i].build_id, 0, BPF_BUILD_ID_SIZE);
 		}
 		return;
 	}
@@ -324,6 +325,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
 			/* per entry fall back to ips */
 			id_offs[i].status = BPF_STACK_BUILD_ID_IP;
 			id_offs[i].ip = ips[i];
+			memset(id_offs[i].build_id, 0, BPF_BUILD_ID_SIZE);
 			continue;
 		}
 		id_offs[i].offset = (vma->vm_pgoff << PAGE_SHIFT) + ips[i]
-- 
2.19.1

[PATCH AUTOSEL 4.19 72/83] selftests/bpf: retry tests that expect build-id

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit f67ad87ab3120e82845521b18a2b99273a340308 ]

While running test_progs in a loop I found out that I'm sometimes hitting
"Didn't find expected build ID from the map" error.

Looking at stack_map_get_build_id_offset() it seems that it is racy (by
design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock
current->mm->mmap_sem).

Let's retry this test a single time.

Fixes: 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_progs.c | 30 ++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index 0ef68204c84b..c94c7b6da53b 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -1136,7 +1136,9 @@ static void test_stacktrace_build_id(void)
 	int i, j;
 	struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
 	int build_id_matches = 0;
+	int retry = 1;
 
+retry:
 	err = bpf_prog_load(file, BPF_PROG_TYPE_TRACEPOINT, &obj, &prog_fd);
 	if (CHECK(err, "prog_load", "err %d errno %d\n", err, errno))
 		goto out;
@@ -1249,6 +1251,19 @@ static void test_stacktrace_build_id(void)
 		previous_key = key;
 	} while (bpf_map_get_next_key(stackmap_fd, &previous_key, &key) == 0);
 
+	/* stack_map_get_build_id_offset() is racy and sometimes can return
+	 * BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID;
+	 * try it one more time.
+	 */
+	if (build_id_matches < 1 && retry--) {
+		ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE);
+		close(pmu_fd);
+		bpf_object__close(obj);
+		printf("%s:WARN:Didn't find expected build ID from the map, retrying\n",
+		       __func__);
+		goto retry;
+	}
+
 	if (CHECK(build_id_matches < 1, "build id match",
 		  "Didn't find expected build ID from the map\n"))
 		goto disable_pmu;
@@ -1289,7 +1304,9 @@ static void test_stacktrace_build_id_nmi(void)
 	int i, j;
 	struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
 	int build_id_matches = 0;
+	int retry = 1;
 
+retry:
 	err = bpf_prog_load(file, BPF_PROG_TYPE_PERF_EVENT, &obj, &prog_fd);
 	if (CHECK(err, "prog_load", "err %d errno %d\n", err, errno))
 		return;
@@ -1384,6 +1401,19 @@ static void test_stacktrace_build_id_nmi(void)
 		previous_key = key;
 	} while (bpf_map_get_next_key(stackmap_fd, &previous_key, &key) == 0);
 
+	/* stack_map_get_build_id_offset() is racy and sometimes can return
+	 * BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID;
+	 * try it one more time.
+	 */
+	if (build_id_matches < 1 && retry--) {
+		ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE);
+		close(pmu_fd);
+		bpf_object__close(obj);
+		printf("%s:WARN:Didn't find expected build ID from the map, retrying\n",
+		       __func__);
+		goto retry;
+	}
+
 	if (CHECK(build_id_matches < 1, "build id match",
 		  "Didn't find expected build ID from the map\n"))
 		goto disable_pmu;
-- 
2.19.1

[PATCH AUTOSEL 4.19 73/83] atm: he: fix sign-extension overflow on large shift

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit cb12d72b27a6f41325ae23a11033cf5fedfa1b97 ]

Shifting the 1 by exp by an int can lead to sign-extension overlow when
exp is 31 since 1 is an signed int and sign-extending this result to an
unsigned long long will set the upper 32 bits.  Fix this by shifting an
unsigned long.

Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/he.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 29f102dcfec4..329ce9072ee9 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -717,7 +717,7 @@ static int he_init_cs_block_rcm(struct he_dev *he_dev)
 			instead of '/ 512', use '>> 9' to prevent a call
 			to divdu3 on x86 platforms
 		*/
-		rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9;
+		rate_cps = (unsigned long long) (1UL << exp) * (man + 512) >> 9;
 
 		if (rate_cps < 10)
 			rate_cps = 10;	/* 2.2.1 minimum payload rate is 10 cps */
-- 
2.19.1

[PATCH AUTOSEL 4.19 74/83] hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table

[Sasha Levin]

From: Cheng-Min Ao <tony_ao@wiwynn.com>

[ Upstream commit f422449b58548a41e98fc97b259a283718e527db ]

Correct a typo in OF device ID table
The last one should be 'ti,tmp442'

Signed-off-by: Cheng-Min Ao <tony_ao@wiwynn.com>
Signed-off-by: Yu-Hsiang Chen <matt_chen@wiwynn.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/tmp421.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index e36399213324..ceb3db6f3fdd 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -88,7 +88,7 @@ static const struct of_device_id tmp421_of_match[] = {
 		.data = (void *)2
 	},
 	{
-		.compatible = "ti,tmp422",
+		.compatible = "ti,tmp442",
 		.data = (void *)3
 	},
 	{ },
-- 
2.19.1

[PATCH AUTOSEL 4.19 75/83] leds: lp5523: fix a missing check of return value of lp55xx_read

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 248b57015f35c94d4eae2fdd8c6febf5cd703900 ]

When lp55xx_read() fails, "status" is an uninitialized variable and thus
may contain random value; using it leads to undefined behaviors.

The fix inserts a check for the return value of lp55xx_read: if it
fails, returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-lp5523.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index a2e74feee2b2..fd64df5a57a5 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -318,7 +318,9 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	if (ret)
+		return ret;
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {
-- 
2.19.1

[PATCH AUTOSEL 4.19 76/83] bpf: bpf_setsockopt: reset sock dst on SO_MARK changes

[Sasha Levin]

From: Peter Oskolkov <posk@google.com>

[ Upstream commit f4924f24da8c7ef64195096817f3cde324091d97 ]

In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used
to change sk_mark, sk_dst_reset(sk) is called. The same should be
done in bpf_setsockopt().

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 3400c7abda13..fb0080e84bd4 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3930,7 +3930,10 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 			sk->sk_rcvlowat = val ? : 1;
 			break;
 		case SO_MARK:
-			sk->sk_mark = val;
+			if (sk->sk_mark != val) {
+				sk->sk_mark = val;
+				sk_dst_reset(sk);
+			}
 			break;
 		default:
 			ret = -EINVAL;
-- 
2.19.1

[PATCH AUTOSEL 4.19 77/83] dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start

[Sasha Levin]

From: Madalin Bucur <madalin.bucur@nxp.com>

[ Upstream commit c6ddfb9a963f0cac0f7365acfc87f3f3b33a3b69 ]

As txq_trans_update() only updates trans_start when the lock is held,
trans_start does not get updated if NETIF_F_LLTX is declared.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 65a22cd9aef2..029730bbe7db 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2052,6 +2052,7 @@ static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 	bool nonlinear = skb_is_nonlinear(skb);
 	struct rtnl_link_stats64 *percpu_stats;
 	struct dpaa_percpu_priv *percpu_priv;
+	struct netdev_queue *txq;
 	struct dpaa_priv *priv;
 	struct qm_fd fd;
 	int offset = 0;
@@ -2101,6 +2102,11 @@ static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 	if (unlikely(err < 0))
 		goto skb_to_fd_failed;
 
+	txq = netdev_get_tx_queue(net_dev, queue_mapping);
+
+	/* LLTX requires to do our own update of trans_start */
+	txq->trans_start = jiffies;
+
 	if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
 		fd.cmd |= cpu_to_be32(FM_FD_CMD_UPD);
 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
-- 
2.19.1

[PATCH AUTOSEL 4.19 78/83] mlxsw: pci: Return error on PCI reset timeout

[Sasha Levin]

From: Nir Dotan <nird@mellanox.com>

[ Upstream commit 67c14cc9b35055264fc0efed00159a7de1819f1b ]

Return an appropriate error in the case when the driver timeouts on waiting
for firmware to go out of PCI reset.

Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index c7901a3f2a79..a903e97793f9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1367,10 +1367,10 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci,
 		u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY);
 
 		if ((val & MLXSW_PCI_FW_READY_MASK) == MLXSW_PCI_FW_READY_MAGIC)
-			break;
+			return 0;
 		cond_resched();
 	} while (time_before(jiffies, end));
-	return 0;
+	return -EBUSY;
 }
 
 static int mlxsw_pci_alloc_irq_vectors(struct mlxsw_pci *mlxsw_pci)
-- 
2.19.1

[PATCH AUTOSEL 4.19 79/83] net: bridge: Mark FDB entries that were added by user as such

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 710ae72877378e7cde611efd30fe90502a6e5b30 ]

Externally learned entries can be added by a user or by a switch driver
that is notifying the bridge driver about entries that were learned in
hardware.

In the first case, the entries are not marked with the 'added_by_user'
flag, which causes switch drivers to ignore them and not offload them.

The 'added_by_user' flag can be set on externally learned FDB entries
based on the 'swdev_notify' parameter in br_fdb_external_learn_add(),
which effectively means if the created / updated FDB entry was added by
a user or not.

Fixes: 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_fdb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 502f66349530..4d4b9b5ea1c1 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -1088,6 +1088,8 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
 			err = -ENOMEM;
 			goto err_unlock;
 		}
+		if (swdev_notify)
+			fdb->added_by_user = 1;
 		fdb->added_by_external_learn = 1;
 		fdb_notify(br, fdb, RTM_NEWNEIGH, swdev_notify);
 	} else {
@@ -1107,6 +1109,9 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
 			modified = true;
 		}
 
+		if (swdev_notify)
+			fdb->added_by_user = 1;
+
 		if (modified)
 			fdb_notify(br, fdb, RTM_NEWNEIGH, swdev_notify);
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 80/83] mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 64254a2054611205798e6bde634639bc704573ac ]

The driver currently treats static FDB entries as both static and
sticky. This is incorrect and prevents such entries from being roamed to
a different port via learning.

Fix this by configuring static entries with ageing disabled and roaming
enabled.

In net-next we can add proper support for the newly introduced 'sticky'
flag.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 0d9ea37c5d21..ed8421144d5f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -1234,7 +1234,7 @@ mlxsw_sp_bridge_port_fdb_flush(struct mlxsw_sp *mlxsw_sp,
 static enum mlxsw_reg_sfd_rec_policy mlxsw_sp_sfd_rec_policy(bool dynamic)
 {
 	return dynamic ? MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS :
-			 MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY;
+			 MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG;
 }
 
 static enum mlxsw_reg_sfd_op mlxsw_sp_sfd_op(bool adding)
@@ -1246,7 +1246,7 @@ static enum mlxsw_reg_sfd_op mlxsw_sp_sfd_op(bool adding)
 static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				     const char *mac, u16 fid, bool adding,
 				     enum mlxsw_reg_sfd_rec_action action,
-				     bool dynamic)
+				     enum mlxsw_reg_sfd_rec_policy policy)
 {
 	char *sfd_pl;
 	u8 num_rec;
@@ -1257,8 +1257,7 @@ static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		return -ENOMEM;
 
 	mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
-	mlxsw_reg_sfd_uc_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
-			      mac, fid, action, local_port);
+	mlxsw_reg_sfd_uc_pack(sfd_pl, 0, policy, mac, fid, action, local_port);
 	num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
 	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
 	if (err)
@@ -1277,7 +1276,8 @@ static int mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				   bool dynamic)
 {
 	return __mlxsw_sp_port_fdb_uc_op(mlxsw_sp, local_port, mac, fid, adding,
-					 MLXSW_REG_SFD_REC_ACTION_NOP, dynamic);
+					 MLXSW_REG_SFD_REC_ACTION_NOP,
+					 mlxsw_sp_sfd_rec_policy(dynamic));
 }
 
 int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid,
@@ -1285,7 +1285,7 @@ int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid,
 {
 	return __mlxsw_sp_port_fdb_uc_op(mlxsw_sp, 0, mac, fid, adding,
 					 MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER,
-					 false);
+					 MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY);
 }
 
 static int mlxsw_sp_port_fdb_uc_lag_op(struct mlxsw_sp *mlxsw_sp, u16 lag_id,
-- 
2.19.1

[PATCH AUTOSEL 4.19 81/83] selftests: forwarding: Add a test case for externally learned FDB entries

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 479a2b761d61c04e2ae97325aa391a8a8c99c23e ]

Test that externally learned FDB entries can roam, but not age out.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/forwarding/bridge_vlan_aware.sh       | 34 ++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
index 04c6431b2bd8..b90dff8d3a94 100755
--- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion"
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn"
 NUM_NETIFS=4
 CHECK_TC="yes"
 source lib.sh
@@ -109,6 +109,38 @@ vlan_deletion()
 	ping_ipv6
 }
 
+extern_learn()
+{
+	local mac=de:ad:be:ef:13:37
+	local ageing_time
+
+	# Test that externally learned FDB entries can roam, but not age out
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn vlan 1
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "Did not find FDB entry when should"
+
+	# Wait for 10 seconds after the ageing time to make sure the FDB entry
+	# was not aged out
+	ageing_time=$(bridge_ageing_time_get br0)
+	sleep $((ageing_time + 10))
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry was aged out when should not"
+
+	$MZ $h2 -c 1 -p 64 -a $mac -t ip -q
+
+	bridge fdb show brport $swp2 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry did not roam when should"
+
+	log_test "Externally learned FDB entry - ageing & roaming"
+
+	bridge fdb del de:ad:be:ef:13:37 dev $swp2 master vlan 1 &> /dev/null
+	bridge fdb del de:ad:be:ef:13:37 dev $swp1 master vlan 1 &> /dev/null
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.19.1

[PATCH AUTOSEL 4.19 82/83] net/mlx5e: Fix wrong (zero) TX drop counter indication for representor

[Sasha Levin]

From: Tariq Toukan <tariqt@mellanox.com>

[ Upstream commit 7fdc1adc52d3975740547a78c2df329bb207f15d ]

For representors, the TX dropped counter is not folded from the
per-ring counters. Fix it.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index c9cc9747d21d..701624a63d2f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -144,6 +144,7 @@ static void mlx5e_rep_update_sw_counters(struct mlx5e_priv *priv)
 
 			s->tx_packets		+= sq_stats->packets;
 			s->tx_bytes		+= sq_stats->bytes;
+			s->tx_queue_dropped	+= sq_stats->dropped;
 		}
 	}
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 83/83] isdn: avm: Fix string plus integer warning from Clang

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 7afa81c55fca0cad589722cb4bce698b4803b0e1 ]

A recent commit in Clang expanded the -Wstring-plus-int warning, showing
some odd behavior in this file.

drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
                cinfo->version[j] = "\0\0" + 1;
                                    ~~~~~~~^~~
drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning
                cinfo->version[j] = "\0\0" + 1;
                                           ^
                                    &      [  ]
1 warning generated.

This is equivalent to just "\0". Nick pointed out that it is smarter to
use "" instead of "\0" because "" is used elsewhere in the kernel and
can be deduplicated at the linking stage.

Link: https://github.com/ClangBuiltLinux/linux/issues/309
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/avm/b1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/avm/b1.c b/drivers/isdn/hardware/avm/b1.c
index 4ac378e48902..40ca1e8fa09f 100644
--- a/drivers/isdn/hardware/avm/b1.c
+++ b/drivers/isdn/hardware/avm/b1.c
@@ -423,7 +423,7 @@ void b1_parse_version(avmctrl_info *cinfo)
 	int i, j;
 
 	for (j = 0; j < AVM_MAXVERSION; j++)
-		cinfo->version[j] = "\0\0" + 1;
+		cinfo->version[j] = "";
 	for (i = 0, j = 0;
 	     j < AVM_MAXVERSION && i < cinfo->versionlen;
 	     j++, i += cinfo->versionbuf[i] + 1)
-- 
2.19.1