From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Zeng Tao <prime.zeng@hisilicon.com>,
Felipe Balbi <felipe.balbi@linux.intel.com>,
Sasha Levin <sashal@kernel.org>,
linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 08/40] usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
Date: Thu, 14 Feb 2019 21:12:41 -0500 [thread overview]
Message-ID: <20190215021313.178476-8-sashal@kernel.org> (raw)
In-Reply-To: <20190215021313.178476-1-sashal@kernel.org>
From: Zeng Tao <prime.zeng@hisilicon.com>
[ Upstream commit 88b1bb1f3b88e0bf20b05d543a53a5b99bd7ceb6 ]
Currently the link_state is uninitialized and the default value is 0(U0)
before the first time we start the udc, and after we start the udc then
stop the udc, the link_state will be undefined.
We may have the following warnings if we start the udc again with
an undefined link_state:
WARNING: CPU: 0 PID: 327 at drivers/usb/dwc3/gadget.c:294 dwc3_send_gadget_ep_cmd+0x304/0x308
dwc3 100e0000.hidwc3_0: wakeup failed --> -22
[...]
Call Trace:
[<c010f270>] (unwind_backtrace) from [<c010b3d8>] (show_stack+0x10/0x14)
[<c010b3d8>] (show_stack) from [<c034a4dc>] (dump_stack+0x84/0x98)
[<c034a4dc>] (dump_stack) from [<c0118000>] (__warn+0xe8/0x100)
[<c0118000>] (__warn) from [<c0118050>](warn_slowpath_fmt+0x38/0x48)
[<c0118050>] (warn_slowpath_fmt) from [<c0442ec0>](dwc3_send_gadget_ep_cmd+0x304/0x308)
[<c0442ec0>] (dwc3_send_gadget_ep_cmd) from [<c0445e68>](dwc3_ep0_start_trans+0x48/0xf4)
[<c0445e68>] (dwc3_ep0_start_trans) from [<c0446750>](dwc3_ep0_out_start+0x64/0x80)
[<c0446750>] (dwc3_ep0_out_start) from [<c04451c0>](__dwc3_gadget_start+0x1e0/0x278)
[<c04451c0>] (__dwc3_gadget_start) from [<c04452e0>](dwc3_gadget_start+0x88/0x10c)
[<c04452e0>] (dwc3_gadget_start) from [<c045ee54>](udc_bind_to_driver+0x88/0xbc)
[<c045ee54>] (udc_bind_to_driver) from [<c045f29c>](usb_gadget_probe_driver+0xf8/0x140)
[<c045f29c>] (usb_gadget_probe_driver) from [<bf005424>](gadget_dev_desc_UDC_store+0xac/0xc4 [libcomposite])
[<bf005424>] (gadget_dev_desc_UDC_store [libcomposite]) from[<c023d8e0>] (configfs_write_file+0xd4/0x160)
[<c023d8e0>] (configfs_write_file) from [<c01d51e8>] (__vfs_write+0x1c/0x114)
[<c01d51e8>] (__vfs_write) from [<c01d5ff4>] (vfs_write+0xa4/0x168)
[<c01d5ff4>] (vfs_write) from [<c01d6d40>] (SyS_write+0x3c/0x90)
[<c01d6d40>] (SyS_write) from [<c0107400>] (ret_fast_syscall+0x0/0x3c)
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc3/gadget.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e50f7ca9ca6e..0b378be60a2c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1906,6 +1906,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
/* begin to receive SETUP packets */
dwc->ep0state = EP0_SETUP_PHASE;
+ dwc->link_state = DWC3_LINK_STATE_SS_DIS;
dwc3_ep0_out_start(dwc);
dwc3_gadget_enable_irq(dwc);
--
2.19.1
next prev parent reply other threads:[~2019-02-15 2:28 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-15 2:12 [PATCH AUTOSEL 4.14 01/40] drm/msm: Unblock writer if reader closes file Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 02/40] ASoC: Intel: Haswell/Broadwell: fix setting for .dynamic field Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 03/40] ALSA: compress: prevent potential divide by zero bugs Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 04/40] ASoC: Variable "val" in function rt274_i2c_probe() could be uninitialized Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 05/40] clk: vc5: Abort clock configuration without upstream clock Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 06/40] thermal: int340x_thermal: Fix a NULL vs IS_ERR() check Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 07/40] usb: dwc3: gadget: synchronize_irq dwc irq in suspend Sasha Levin
2019-02-15 2:12 ` Sasha Levin [this message]
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 09/40] usb: gadget: Potential NULL dereference on allocation error Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 10/40] genirq: Make sure the initial affinity is not empty Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 11/40] ASoC: dapm: change snprintf to scnprintf for possible overflow Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 12/40] ASoC: imx-audmux: " Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 13/40] selftests: seccomp: use LDLIBS instead of LDFLAGS Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 14/40] selftests: gpio-mockup-chardev: Check asprintf() for error Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 15/40] ARC: fix __ffs return value to avoid build warnings Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 16/40] drivers: thermal: int340x_thermal: Fix sysfs race condition Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 17/40] staging: rtl8723bs: Fix build error with Clang when inlining is disabled Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 18/40] mac80211: fix miscounting of ttl-dropped frames Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 19/40] sched/wait: Fix rcuwait_wake_up() ordering Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 20/40] futex: Fix (possible) missed wakeup Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 21/40] locking/rwsem: " Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 22/40] libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive() Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 23/40] drm/amd/powerplay: OD setting fix on Vega10 Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 24/40] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 25/40] staging: android: ion: Support cpu access during dma_buf_detach Sasha Levin
2019-02-15 2:12 ` [PATCH AUTOSEL 4.14 26/40] direct-io: allow direct writes to empty inodes Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 27/40] writeback: synchronize sync(2) against cgroup writeback membership switches Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 28/40] scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state() Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 29/40] net: altera_tse: fix connect_local_phy error path Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 30/40] hv_netvsc: Fix ethtool change hash key error Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 31/40] sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 32/40] ax25: fix possible use-after-free Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 33/40] net: usb: asix: ax88772_bind return error when hw_reset fail Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 34/40] net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 35/40] ibmveth: Do not process frames after calling napi_reschedule Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 36/40] mac80211: don't initiate TDLS connection if station is not associated to AP Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 37/40] mac80211: Add attribute aligned(2) to struct 'action' Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 38/40] cfg80211: extend range deviation for DMG Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 39/40] svm: Fix AVIC incomplete IPI emulation Sasha Levin
2019-02-15 2:13 ` [PATCH AUTOSEL 4.14 40/40] KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190215021313.178476-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=felipe.balbi@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=prime.zeng@hisilicon.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox