From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH v2] device.h: reorganize struct device
Date: Thu, 28 Feb 2019 14:58:32 +0100 [thread overview]
Message-ID: <20190228135832.GA16272@kroah.com> (raw)
In-Reply-To: <20190226144108.25891-1-gregkh@linuxfoundation.org>
struct device is big, around 760 bytes on x86_64. It's not a critical
structure, but it is embedded everywhere, so making it smaller is always
a good thing.
With a recent patch that moved a field from struct device to the private
structure, some benchmarks showed a very odd regression, despite this
structure having nothing to do with those benchmarks. That caused me to
look into the layout of the structure. Using 'pahole', it showed a
number of holes and ways that the structure could be reordered in order
to align some cachelines better, as well as reduce the size of the
overall structure.
Move 'struct kobj' to the start of the structure, to keep that access
in the first cacheline, and try to organize things a bit more compactly
where possible
By doing these few moves, the result removes at least 8 bytes from
'struct device' on a 64bit system. Given we know there are systems with
at least 30k devices in memory at once, every little byte counts, and
this change could be a savings of 240k of kernel memory for them. On
"normal" systems the overall memory savings would be much less.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
v2: drop the first patch, and make this one a bit simpler to try to take
advantage where we can. It's not as much savings, but it's better
than nothing.
include/linux/device.h | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/linux/device.h b/include/linux/device.h
index 6cb4640b6160..4eaa09468ab9 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -967,18 +967,14 @@ struct dev_links_info {
* a higher-level representation of the device.
*/
struct device {
+ struct kobject kobj;
struct device *parent;
struct device_private *p;
- struct kobject kobj;
const char *init_name; /* initial name of the device */
const struct device_type *type;
- struct mutex mutex; /* mutex to synchronize calls to
- * its driver.
- */
-
struct bus_type *bus; /* type of bus device is on */
struct device_driver *driver; /* which driver has allocated this
device */
@@ -986,6 +982,10 @@ struct device {
core doesn't touch it */
void *driver_data; /* Driver data, set and get with
dev_set/get_drvdata */
+ struct mutex mutex; /* mutex to synchronize calls to
+ * its driver.
+ */
+
struct dev_links_info links;
struct dev_pm_info power;
struct dev_pm_domain *pm_domain;
@@ -1000,9 +1000,6 @@ struct device {
struct list_head msi_list;
#endif
-#ifdef CONFIG_NUMA
- int numa_node; /* NUMA node this device is close to */
-#endif
const struct dma_map_ops *dma_ops;
u64 *dma_mask; /* dma mask (if dma'able device) */
u64 coherent_dma_mask;/* Like dma_mask, but for
@@ -1029,6 +1026,9 @@ struct device {
struct device_node *of_node; /* associated device tree node */
struct fwnode_handle *fwnode; /* firmware device node */
+#ifdef CONFIG_NUMA
+ int numa_node; /* NUMA node this device is close to */
+#endif
dev_t devt; /* dev_t, creates the sysfs "dev" */
u32 id; /* device instance */
--
2.21.0
prev parent reply other threads:[~2019-02-28 13:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-26 14:41 [PATCH 1/2] device.h: pack struct dev_links_info Greg Kroah-Hartman
2019-02-26 14:41 ` [PATCH 2/2] device.h: reorganize struct device Greg Kroah-Hartman
2019-02-26 15:40 ` [PATCH 1/2] device.h: pack struct dev_links_info Rafael J. Wysocki
2019-02-27 9:23 ` Johan Hovold
2019-02-27 9:31 ` Greg Kroah-Hartman
2019-02-27 9:40 ` Johan Hovold
2019-02-27 9:54 ` Greg Kroah-Hartman
2019-02-27 10:59 ` Johan Hovold
2019-02-27 12:06 ` Greg Kroah-Hartman
2019-02-27 13:32 ` Johan Hovold
2019-02-28 8:35 ` Greg Kroah-Hartman
2019-02-28 23:43 ` Rafael J. Wysocki
2019-02-28 13:58 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190228135832.GA16272@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rafael.j.wysocki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox